The place where TF-M places its non-secure api header files has changed
Therefore changing it for for all applications that use it.
Signed-off-by: Markus Swarowsky <markus.swarowsky@nordicsemi.no>
If user has not supplied address pointer when calling accept(),
then we would not be able to figure out the used socket domain
properly. But as there is now SO_DOMAIN option supported, use
that to get the correct socket domain.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The getsockopt() will return the address domain of the given
socket like AF_INET or AF_INET6.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
gcc prints this warning message
'strncat' specified bound 1 equals source length [-Wstringop-overflow=]
58 | strncat(fd, "C", 1);
There was no error in the code but avoid the warning by not using
strncat().
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The socket service provides a similar functionality as what
initd provides in Linux. It listens user registered sockets
for any activity and then launches a k_work for it. This way
each application does not need to create a thread to listen
a blocking socket.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
According to the POSIX specification, null pointer
is a valid value for the `address` argument
of the `accept` function.
This commit adds a check to prevent a null pointer
dereference inside `z_impl_zsock_accept`.
Signed-off-by: Mirko Covizzi <mirko.covizzi@nordicsemi.no>
Adding a callback for handling lwm2m messages with prefixed paths defined
by the gateway object. If CONFIG_LWM2M_GATEWAY_OBJ_SUPPORT is set,
each path is checked for the prefix stored in the object instances of the
gateway object 25. If prefixes match the msg is passed to the gw_msg_cb.
Signed-off-by: Simon Walz <simon.walz@autosen.com>
lwm2m_engine_pause() caused deadlock if it was called within
engine thread.
Remove while loop from lwm2m_engine_resume().
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
Add short delay before triggering registration update. This allows
postponing the update from application side if needed.
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
DTLS socket is not really connection-less as UDP, as it required the
DTLS handshake to take place before the socket is usable. Therefore,
align the DTLS connect() behavior with regular TLS.
The change is backward compatible. connect() call is still optional for
DTLS socket (the handshake can still take place from send()/recv()) and
a socket option was provided to disable DTLS handshake on connect().
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When using DTLS socket, the application may choose to monitor socket
with poll() before handshake has been complete. This could lead to
potential crash (as the TLS context may have been left uninitialized)
and unexpected POLLIN reports (while handshake was still not complete).
This commit fixes the above - POLLIN will only be reported once
handshake is complete and data is available
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case a socket error was caused by TLS layer, it was not reported with
POLLERR. This commit fixes this.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case TLS session is closed at the TLS level (and thus recv() reports
0 to the application) a certain race occurs between consecutive recv()
call, and TCP session teardown. As mbedtls_ssl_read() only reports
session close upon receiving CLOSE alert, consecutive non-blocking
recv() calls would report EAGAIN instead of connection closed, if called
before underlying TCP connection was closed.
Fix this, by storing the information that TLS session has ended at TLS
socket level. The new flag will be checked before attempting further
mbed TLS actions, so that connection status is reported correctly.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Make sure iovec is initialized to a value so that there
is no possibility that it is accessed uninitialized.
Fixes: #66838
Coverity-CID: 334911
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The original idea was to check that we have enough network
interfaces in the system. The check needs to verify max IPv4
and IPv6 supported interfaces instead of always checking
IPv6 one.
Fixes: #66843
Coverity-CID: 334899
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Refactored the socket state indication into its own function
that checks the state of TX queues as well as number of
pending CoAP responses.
Check the state after receiving a packet, as it might
have been a last Ack packet we have been waiting.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Deprecate lwm2m_set_u64() and lwm2m_get_u64 as only
LWM2M_RES_TYPE_S64 exist. Unsigned variant is not defined.
Technically these might have worked OK, but it is undefined
what happens to large unsigned values when those are
converted to various payload formats (like CBOR) that might
decode numbers differently depending of their signedness.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Allow engine to give hints about ongoing CoAP transmissions.
This information can be used to control various power saving
modes for network interfaces. For example cellular networks might
support release assist indicator.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
In slow networks, like Nb-IOT, when using queue mode,
there might be significant delay between the time we
put the packet into a transmission queue and the time
we actually start transmitting.
This might cause QUEUE_RX_OFF state to be triggered earlier
than expected. Remedy the issue by updating the timestamp on the
moment where packet is accepted by zsock_send().
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
In case a waiting TLS socket reports an error in the underlying poll
call, try to read the actual error from the socket, instead of blindly
returning -EIO in all cases.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
There are several subsystems and boards which require a relatively large
system heap (used by k_malloc()) to function properly. This became even
more notable with the recent introduction of the ACPICA library, which
causes ACPI-using boards to require a system heap of up to several
megabytes in size.
Until now, subsystems and boards have tried to solve this by having
Kconfig overlays which modify the default value of HEAP_MEM_POOL_SIZE.
This works ok, except when applications start explicitly setting values
in their prj.conf files:
$ git grep CONFIG_HEAP_MEM_POOL_SIZE= tests samples|wc -l
157
The vast majority of values set by current sample or test applications
is much too small for subsystems like ACPI, which results in the
application not being able to run on such boards.
To solve this situation, we introduce support for subsystems to specify
their own custom system heap size requirement. Subsystems do
this by defining Kconfig options with the prefix HEAP_MEM_POOL_ADD_SIZE_.
The final value of the system heap is the sum of the custom
minimum requirements, or the value existing HEAP_MEM_POOL_SIZE option,
whichever is greater.
We also introduce a new HEAP_MEM_POOL_IGNORE_MIN Kconfig option which
applications can use to force a lower value than what subsystems have
specficied, however this behavior is disabled by default.
Whenever the minimum is greater than the requested value a CMake warning
will be issued in the build output.
This patch ends up modifying several places outside of kernel code,
since the presence of the system heap is no longer detected using a
non-zero CONFIG_HEAP_MEM_POOL_SIZE value, rather it's now detected using
a new K_HEAP_MEM_POOL_SIZE value that's evaluated at build.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Update coap_service_send and coap_resource_send to take an optional
pointer argument to the newly introduced coap_transmission_parameters.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Replace function parameter 'retries' with pointer to structure
holding coap transmission parameters. This allows setting the
retransmission parameters individually for each pending request.
Add coap transmission parameters to coap_pending structure.
Update migration guide and release notes.
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
Use correct format specifier for LOG_ERR in lwm2m_obj_device.c. The
previously used format specifier of %u was correct for 32 bit systems
but would produce a build warning for 64 bit systems.
Fixes#66441
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
As the common.h is only meant to be used by the network
shell files, rename it to be more descriptive in order to
avoid possible conflicts with any other common.h file.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add new functions to the public CoAP API to configure CoAP packet
retransmission settings. Application may need to re-configure the
settings for example when cellular modem changes connection from
LTE-M to NB-IoT or vice versa.
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
When a TCP connection is established, if there is no data exchange
between the two parties within the set time, the side that enables
TCP Keep-alive will send a TCP probe packet with the same sequence
number as the previous TCP packet. This TCP probe packet is an empty
ACK packet (the specification recommends that it should not contain
any data, but can also contain 1 nonsense byte, such as 0x00.). If
there is no response from the other side after several consecutive
probe packets are sent, it is determined that the tcp connection has
failed, and the connection is closed.
The keep-alive default parameters are aligned with Linux defaults.
Signed-off-by: Horse Ma <mawei@coltsmart.com>
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If observed resource was written during the pMin period, it did
not schedule any wake-up event into the future. Notify message would
then only be generated as a result of any other (like Update) event.
Refactor check_notifications() to follow same pattern as retransmit_req().
Return the next event timestamp, which could be now.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
SNTP response is not analyzed for uncertainty, and no uncertainty is given
to the `struct sntp_time` returned. Fix it with a Kconfig option that adds
optional SNTP uncertainty and timestamp fields in SNTP time struct, and
calculates these when parsing the response.
Adds two helper functions to convert Q16.16/Q32.32 in seconds to `int64_t`
in microseconds to facilitate this.
Also changes combined `lvm` field in `struct sntp_pkt` to bit-fields
`li`, `vn`, and `mode`.
Signed-off-by: Jasper Smit <git@jrhrsmit.nl>
This reverts commit 5227f24815.
The coap observer events will be replaced with net_mgmt events.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
A device can be reset before the error code list is communicated
to a LwM2M server so optionally store error list in settings so it
can restored after reset.
Signed-off-by: Nick Ward <nix.ward@gmail.com>
If server registration fails, allow fallback to secondary server,
or fallback to bootstrap.
Also allow fallback to different bootstrap server.
Add API to tell RD client when server have been disabled by
executable command.
Changes to RD state machine:
* All retry logic should be handled in NETWORK_ERROR state.
* New state SERVER_DISABLED.
* Internally disable servers that reject registration
* Temporary disable server on network error.
* Clean up all "disable timers" on start.
* Select server first, then find security object for it.
* State functions return void, error handling is done using states.
* DISCONNECT event will only come when client is requested to stop.
* NETWORK_ERROR will stop engine. This is generic error for all kinds
of registration or network failures.
* BOOTSTRAP_REG_FAILURE also stops engine. This is fatal, and we cannot
recover.
Refactoring:
* Server selection logic is inside server object.
* sm_handle_timeout_state() does not require msg parameter. Unused.
* When bootstrap fail, we should NOT back off to registration.
This is a fatal error, and it stops the engine and informs application.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
React to disable executable, as well as add callback that allows
disabling server for a period of time.
Also add API that would find a next server candidate based on the
priority and server being not-disabled.
Move all server related functions into its own header.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Zephyr has its own multicast join/leave API but for
interoperability, it is possible to use the multicast
socket API and IPV6_ADD_MEMBERSHIP and IPV6_DROP_MEMBERSHIP
socket options.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Zephyr has its own multicast join/leave API but for
interoperability, it is possible to use the multicast
socket API and IP_ADD_MEMBERSHIP and IP_DROP_MEMBERSHIP
socket options.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
We are creating a multicast address in mDNS or LLMNR
responder so set the TTL or hoplimit using the multicast
variant API.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
We specifically set TTL/hoplimit to 1 for LLMNR,
but only want to set it if in that specific case.
We must not pass TTL/hoplimit value 0 as that would
cause the packet to be dropped.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The IPv4 TTL could only manipulated via net_context interface.
It makes sense to allow the same from socket interface via
the setsockopt/getsockopt calls.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This was somehow missed, but since ICMP rework, message handlers should
not dereference the packet, as it's done by the ICMP lib.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Set the static initialiser socket file descriptor to -1 to make sure
it is invalid before using coap_service_send.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Add extra checks that make sure that msg_iov is set
as we cannot receive anything if receive buffers are
not set.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The CoAP request handler returns errno codes in the following cases:
* ENOENT if no handler found; respond with 4.04
* ENOTSUP if an unknown request code received; respond with 4.00
* EPERM no handler found for the method; respond with 4.05
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Protected credential storage makes use of the PSA API, therefore it must
be present in the library include path. This was missed during the
recent CMakeLists.txt rework of this library.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If we for some reason are supplied unsupported socket type in
recvfrom(), then return ENOTSUP error to the caller instead of
silently accept it by returning 0.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If user has set either IP_PKTINFO (for IPv4) or
IPV6_RECVPKTINFO (for IPv6) socket options, then the system
will return relevant information in recvmsg() ancillary data.
Fixes#36415
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add IP_PKTINFO or IPV6_RECVPKTINFO BSD socket options that
can be used to get extra information of received data in
the ancillary data in recvmsg() call.
For IPV6_RECVPKTINFO see RFC 3542 for details.
For IP_PKTINFO see Linux ip(7) manual page for details.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
When a client uses wildcard subscription and a new message is
published to the matching topic for the first time, the gateway
sends REGISTER message to the client, containing the exact
topic name and a new topic ID.
This change fixes adding these topic ID and name to the internal
topics list.
Signed-off-by: Alexander Vasiliev <alexander.vasiliev@siemens.com>
Add a function to MQTT-SN library API to get topic name by ID
from the internal topics list.
Signed-off-by: Alexander Vasiliev <alexander.vasiliev@siemens.com>
Added igmpv3 support based on the already existing structure for igmpv2.
The already existing api is not modified to prevent breaking exisiting
applications.
Signed-off-by: Ibe Van de Veire <ibe.vandeveire@basalte.be>
Fix the CMakeLists of the tls_credentials and sockets folders
to link/interface to the net library instead of the zephyr library.
This fixes issues where some files are not found in the link interface
when compiling the sources in this folder.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Make sure we send the entire packet buffer before bumping the packet
counter, send() does not guarantee that all of the requested data will
be sent at once with STREAM socket.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case underlying socket reported error while waiting for TX, the
errno value was not set accordingly. This commit fixes this.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
RSRQ is the ratio between send and received signal strength and usually
understood/expected to be represented as a ratio in dB and as such always
has a negative range. So to allow RSRQ to be represented correctly the
resource must allow negative values, but currently it's limited to unsigned
8bit integers.
Signed-off-by: Henning Fleddermann <henning.fleddermann@grandcentrix.net>
Network interface numbering starts from 1, therefore when accessing
help/index array, the interface index should not be used directly, but
rather decremented by 1, to avoid out-of-bound access on those arrays.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Make sure that the error message does not overflow the transmit buffer
when copying the error message string.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
There's not really much to do when the transmission of the error reply
fails, but we can at least log the failure.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The result of string to float conversion in LwM2M shell write command
was not verified, which could result in incorrect data being written to
the resource.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As reported by Coverity, cpkt was being used before checking it's not
NULL.
Fixes#65372 / CID: 323075
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Since lwm2m_load_tls_credentials(ctx) will assume that the ctx has a
valid security object assigned to it, it should not be called at all
when ctx.use_dtls == false.
This solves a major bug where LwM2M comms are DTLS encrypted but FOTA is
allowed to be plain-text.
Signed-off-by: Benjamin Lindqvist <benjamin@eub.se>
No issues with gcc but clang gives this error for
the *v4 variable few lines below.
.../lib/dns/mdns_responder.c:712:2: error: expected expression
struct net_context *v4;
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Instead of just listening first network interface in the system,
install a multicast listener to all available network interfaces.
Fixes#18748
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
DTLS Connection Identifier support requires DTLS stack
that supports it. MbedTLS support in Zephyr is already
ported in, also some offloaded sockets support it.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Adds a shell interface for TLS Credentials, allowing management of
credentials via the Zephyr shell
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
Add (internal) support for sectag iterating.
Also officially marks negative sectag values as reserved for internal
use.
This will allow a prospective TLS credentials shell to iterate over all
available credentials.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
Adds an internal credential_digest for generating a string digest of
credentials.
Such digests would allow users of a prospective TLS credentials shell to
verify the contents of a given credential without directly accessing
those contents.
Offloading the digest process to the underlying backend allows backends
for which private portions are not directly accessible to be eventually
supported.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
A CoAP client can re-issue an observe request (same endpoint and token)
to refresh it's subscription. No new observer should be registered in
this case.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Add a function to the public CoAP API to find and return the unique
observer based on the address and token.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Core objects version reporting was broken for LwM2M version 1.1, as the
default object version not necessarily matches the LwM2M version.
Therefore, implement a table with default object versions for particular
LwM2M version, which can be looked up when determining whether it's
needed to include object version or not during Registration/Discovery.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit adds the option to register an event handler to CoAP
resources when observers are added/removed.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
In CoAP blockwise the client is supposed to
respond with 2.31 Continue code on Ack. This was recently
broken when Block1 parsing was moved after the initialization
of reponse packet. We need separate CoAP API to modify the code
of existing CoAP packet.
Also Ack packet should contain the Block1 options, even the
last one.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Implement testcases for Information Reporting Interface [300-399]:
* LightweightM2M-1.1-int-301 - Observation and Notification of parameter
values
* LightweightM2M-1.1-int-302 - Cancel Observations using Reset
* LightweightM2M-1.1-int-304 - Observe-Composite Operation
* LightweightM2M-1.1-int-306 – Send Operation
* LightweightM2M-1.1-int-307 – Muting Send
* LightweightM2M-1.1-int-308 - Observe-Composite and Creating
Object Instance
* LightweightM2M-1.1-int-309 - Observe-Composite and Deleting
Object Instance
* LightweightM2M-1.1-int-310 - Observe-Composite and modification of
parameter values
* LightweightM2M-1.1-int-311 - Send command
303 and 305 cannot be implemented using Leshan as it only support
passive cancelling of observation.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
If the interface is WiFi one, then print information about it.
Also the device information is useful to know so print device
name corresponding to the network interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Move the syscall_handler.h header, used internally only to a dedicated
internal folder that should not be used outside of Zephyr.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Do not include the resource type (rt=) in the registration message when
using the OMA JSON format. This was a workaround specifically for the
Wakaama LwM2M server which is no longer needed since the latest master
branch.
Signed-off-by: Marc Lasch <marc.lasch@husqvarnagroup.com>
Portfolio object created string buffers for Identity resources
that was overlapping on some cases.
Don't calculate pointers by hand, allow compiler to calculate it.
Fixes#64634
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Extend the previous support of creating object instances by allowing
creation of resource instances as well.
Similarly, add support for deleting.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
If user adds IPv6 address to the network interface, check
if the address is a multicast one and add it to multicast
group if it is.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If user adds IPv4 address to the network interface, check
if the address is a multicast one and add it to multicast
group if it is.
Fixes#64389
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Default behaviour should only bind to port independent of IP, this
allows even multicast/broadcast L4 traffic to be received.
User can always specify a specific address to bind using shell or
Kconfig or API.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Using a generic IP for address set failures is confusing, esp. two same
prints (one for v4 and the other for v6), so, use explicit version.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Moving the Zephyr specific config options from
modules/hostap/Kconfig to corresponding Kconfig where the
option is specified.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
CoAP reply structure user_data should be kept between
ongoing blocks, so that callbacks for LwM2M send continue
to work on blockwise transfers.
Fixes#64290
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
The new "net sockets" command will utilize the object core
support to track and show information about BSD sockets that
are created in the system. This command is able to show info
for all network sockets (native, offloaded etc) in the system.
Example of the output of the new command:
uart:~$ net sockets
Creator Name Flags FD Lifetime (ms) Sent Received
main af_inet46 6ST 0 3260 819 498
main af_inet46 4ST 1 2110 469 142
main af_inet46 6DU 2 2110 9941 9941
main af_inet46 4DU 3 2110 1375 621
4 active sockets found.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The writefds is typically set if there is an error while
waiting for example the connect() to finish. So check if
the user supplied the writefds and update it accordingly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
In case ping is sent to own address, the request is looped back to the
stack and served before ping work had a chance to reschedule. In result,
when the final ping reply has been server, and ping operation finalized
with `ping_done()`, the work was rescheduled one last time, causing the
ping timeout to be reported. Fix this by rescheduling the work before
sending the actual request, so that the reply handler can cancel the
work properly in such case.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The remote address of the connection is checked whether
it is v4-mapping-to-v6 address in which case we should
print it such.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This allows IPv4 and IPv6 share the same port space.
User can still control the behavior of the v4-mapping-to-v6
by using the IPV6_V6ONLY socket option at runtime.
Currently the IPv4 mapping to IPv6 is turned off by
default, and also the IPV6_V6ONLY is true by default which
means that IPv4 and IPv6 do not share the port space.
Only way to use v4-mapping-to-v6 is to enable the Kconfig
option and turn off the v6only socket option.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Fix two issues with net tcp command:
* The `net tcp` commands are still based on net_context API. For TCP,
the API caller (net shell) should add one extra reference to the
allocated net context, to prevent premature context release in case of
connection teardown. Currently that was not the case, and the context
was released too early, resulting in missing final ACK from the Zephyr
side on connection close.
* The net context API should not be called from the registered connect
callback, as this creates a temporary deadlock situation. The
net_context_connect() function blocks until the connection is
established, or an error or timeout occurs. For that time the
net_context mutex is being locked. In case of connection error (for
example after receiving RST packet) the connect callback is called,
indicating an error. If we try to call net_context API from within, a
deadlock situation takes place, as the context mutex is still locked
by the net_context_connect() (called from the shell thread). This
blocks the further execution of the TCP stack and can result in an
unexpected behavior (like for example retransmitting the SYN packet,
which takes place from yet another thread, TCP work queue).
Fix this, by releasing the net context not from the callback directly,
but based on the return value from net_context_connect().
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The interface number is generated automatically if one
presses <tab> when expecting the interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Allow multiple commands use the same dynamic shell command
completion when expecting network interface index.
For example "net iface" and "net stats" are such commands.
The network interface expansion cannot be used in "net ipv6 add",
"net ipv4 add" and "net route" commands as they require more
data after the network interface index argument.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The "net stacks" has been obsolete for a long time already
so remove it for good. It is replaced by "kernel stacks" cmd.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This is a preparation for the refactoring. The old "net" command
is renamed "net_old" so that the individual commands can be
placed into a separate .c files.
This is done like this because we need to use the
SHELL_SUBCMD_SET_CREATE() to create the sub-command and then
use the SHELL_SUBCMD_ADD() in the .c files to add the command
into the sub-command and not get conflict with the same name
sub-command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This is preparation commit that moves the net shell code to
subsys/net/lib/shell directory. The following commits will
then refactor the code in net_shell.c to smaller and more
manageable pieces.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
As composite operations don't have path in CoAP packet,
it wrongly triggered a check for security object and got
denied the access.
Fixes#64012
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
When objects are initialized, empty strings should be set to length of
zero, instead of length of the full buffer.
So use INIT_OBJ_RES_DATA_LEN() to give both, the buffer size and data
length.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
When resource instances are initialized, we must calculate
beginning of the data buffer using the index and maximum
data length. Otherwise buffers would overlap with previous.
Fixes#64011
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
As the lwm2m_registry.c and specificly lwm2m_set()
functions already ensure null-terminator on string and
count that into string lenght, the content type handlers
should do the same.
When string is written, strlen()+1 is the data length.
When string is read, use the data length, so we don't
leak uninitialized strings. If buffer overrun have
removed the null-terminator the strlen() migh be larger
than data_len.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Resend the request with Echo option and the received Echo
option value when receiving a 4.01 (Unauthorized) response
with the Echo option.
Add missing header file kernel.h to coap_client.h.
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
Add new configuration value CONFIG_LWM2M_UPDATE_PERIOD
that allows calculating update period from last update,
instead of calculating it from the lifetime.
In runtime, server is allowed to change the lifetime of the
registration which causes update perdiod to be effected.
When fixed update period is preferred, UPDATE_PERIOD
config is then used.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
rand32.h does not make much sense, since the random subsystem
provides more APIs than just getting a random 32 bits value.
Rename it to random.h and get consistently with other
subsystems.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Only confirmable messages need pending tracking. Non-confirmable
messages are released after sending.
Match incoming packets with token, not message ID.
Ignore responses with non-matching tokens.
Remove unused function send_reset().
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
In case observation token changes (the LwM2M server re-sends
observation request to the client), the LwM2M engine should cancel any
ongoing notifications based on the old token. Otherwise, it will be
impossible to match the pending notification reply (ACK) with the
observer context anymore, causing new notifications for this
observation to stall.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The compiler emits a "null where non-null expected" warning unless the
argument of strlen is non-null at compile time.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The "encryption only" security level was deprecated in IEEE
802.15.4-2015. This deprecation has already been introduced in the code
but was overlooked in net config.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The current zperf tcp/udp download command doesn't provide the option
to bind the server to a specific host address. If there is more than
one interface, it will not be possible to test each interface with zperf
tcp/udp download command without building the Zpehyr.
This patch will add support for zperf tcp/udp download command to bind
server to host interface address.
Signed-off-by: Rahul Singh <rahul.singh@arm.com>
Added a new event for LWM2M_RD_CLIENT_EVENT_DEREGISTER for
indicate LwM2M client dereistartion.
Updated unit test and sample for new event type
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
This adds a function k_object_is_valid() to check if a kernel
object exists, of certain type, and has been initialized.
This replaces the same (or very similar) code that has been
copied from kernel into the network subsystem.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Fix bug in timeout_expired() function. Coap client was resending
pending messages after 500 ms (COAP_PERIODIC_TIMEOUT) and didn't
wait for retransmission timeout.
Use 64-bit k_uptime_get()
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
If an IPv4 address is requested on an IPv6 interface or vice versa
use a sane default fallback address to send the response.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
The zperf shell sends a IPv6 ping at the start when working
with IPv6. Convert the sending of the ping to use the new API.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add DHCPv6 support to the net config library. In case DHCPv6 is enabled,
net config will attempt to acquire IPv6 address and/or prefix when used.
The user can select with Kconfig whether to request address or prefix
(or both).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Code using sys_csrand_get should depend on CONFIG_CSPRNG_ENABLED symbol
and not in ENTROPY_HAS_DRIVER since they are not using the entropy
device directly.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Previously each piece of LwM2M SEND was
using token length of zero. I think this was unintentional.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
To protect the integrity of outgoing block-wise transfers, append
Etag option that allows client to see if the received block is
generated from same content as it is expecting.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Allow blockwise-send buffers to be used with GET and FETCH
queries as well.
When outgoing packet is split into multiple blocks, don't free
it when first block is send. Keep it in memory until some other requests
come.
Following queries to next block are matched using CoAP token.
However, this required Leshan to use COAP.BLOCKWISE_REUSE_TOKEN=true
option from Californium.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
lwm2m_udp_receive() is only called with same function
pointer, so there no need to carry that in the parameter.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
In reality, single-write is the only operation that handles
BLOCK1 operations when receiving paylod.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Partial content format support is required to have a proper support
for content format OPAQUE instead of threading it as a part of
plain text format.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Move commands that require parameters first into the list.
Move syntax line first, command documentation second,
flags last. This is much like Unix commands do
❯ /bin/ls --help
Usage: /bin/ls [OPTION]... [FILE]...
List information about the FILEs (the current directory by default).
Compared to:
uart:~$ lwm2m
lwm2m - LwM2M commands
Subcommands:
read :read PATH [OPTIONS]
Read value from LwM2M resource
-x Read value as hex stream (default)
-s Read value as string
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
In spec:
The LwM2M Client MUST reject any LwM2M Server operation on
the Security Object (ID: 0) with an "4.01 Unauthorized" response
code.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
With bootstrap one function is unused. Fix by changing
ifdef to if (IS_ENABLED()) so linker can drop it.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
This commits adds support for the SO_REUSEPORT socket option.
The implementation follows the behavior of BSD and tries to also follow
the specific additional features of linux with the following
limitations:
* SO_REUSEADDR and SO_REUSEPORT are not "the same" for client sockets,
as we do not have a trivial way so identify a socket as "client"
during binding. To get the Linux behavior, one has to use SO_REUSEPORT
with Zephyr
* No prevention of "port hijacking"
* No support for the load balancing stuff for incoming
packets/connections
There is also a new Kconfig option to control this feature, which is
enabled by default if TCP or UDP is enabled.
Signed-off-by: Tobias Frauenschläger <t.frauenschlaeger@me.com>
This commit adds support for the SO_REUSEADDR option to be enabled for
a socket using setsockopt(). With this option, it is possible to bind
multiple sockets to the same local IP address / port combination, when
one of the IP address is unspecified (ANY_ADDR).
The implementation strictly follows the BSD implementation and tries to
follow the Linux implementation as close as possible. However, there is
one limitation: for client sockets, the Linux implementation of
SO_REUSEADDR behaves exactly like the one for SO_REUSEPORT and enables
multiple sockets to have exactly the same specific IP address / port
combination. This behavior is not possible with this implementation, as
there is no trivial way to identify a socket to be a client socket
during the bind() call. For this behavior, one has to use the
SO_REUSEPORT option in Zephyr.
There is also a new Kconfig to control this feature similar to other
socket options: CONFIG_NET_CONTEXT_REUSEADDR. This option is enabled by
default if TCP or UDP are enabled. However, it can still be disabled
explicitly.
Signed-off-by: Tobias Frauenschläger <t.frauenschlaeger@me.com>
Allow Bootstrap server to close the DTLS connection immediately
after receiving Ack to Bootstrap-Finish command.
This is not an error as either parties are allowed to tear down
the connection.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Allow certain RD-client states to timeout.
As stated in LwM2M specification:
The bootstrap procedure failed when the LwM2M Client did not
receive the "Bootstrap-Finish" operation after the
EXCHANGE_LIFETIME time period expired.
The EXCHANGE_LIFETIME parameter is defined in RFC 7252
We must handle the case where Bootstrap server is not sending
information towards us.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
When publish buffer run out, no thread active process work.
Fix this, by reschedule process work.
Signed-off-by: Weiwei Guo <guoweiwei@syriusrobotics.com>
Current MQTT-SN topic and publish allocators are not thread safe.
Fix this, by using k_mem_slab instead of arrays.
Signed-off-by: Weiwei Guo <guoweiwei@syriusrobotics.com>
Releasing the lock before notifying condvar led to a race condition
between a thread calling k_condvar_wait to wait for a condition variable
and another thread signalling for this same condition variable. This
resulted in the waiting thread to stay pending and the handle to it
getting removed from the notifyq, meaning it couldn't get woken up
again.
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
In low memory conditions, its possible for socketpair memory allocation
to fail and then the socketpair is freed but after that the remote
semaphore is released causing a crash.
Fix this by freeing the socketpair after releasing the semaphore. Add a
test case to induce low memory conditions (low HEAP and high socketpair
buffer size), with the fix issue is not seen.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
The errors are printed in hex, but no prefix was used. This could be
confused with usual errno return values. The 0x prefix makes clear
that it's a hex value.
Also a missing minus sign is added to one log message.
Signed-off-by: Martin Jäger <martin@libre.solar>
This is handy in testing of setting priority directly rather than
deriving from DSCP. Please note ICMP doesn't use net context.
This is applicable for both shell and API.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Add a network configuration option to configure whether IEEE 802.15.4
packets are expected to be ACKed or not.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
In the IEEE 802.15.4 area certain settings must be set before
net_if_up() may be called (e.g. the channel).
Also net_if_up() may not be called if
CONFIG_IEEE802154_NET_IF_NO_AUTO_START=y.
This fixes the set-up order and handling of
CONFIG_IEEE802154_NET_IF_NO_AUTO_START.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Modify the signature of the k_mem_slab_free() function with a new one,
replacing the old void **mem with void *mem as a parameter.
The following function:
void k_mem_slab_free(struct k_mem_slab *slab, void **mem);
has the wrong signature. mem is only used as a regular pointer, so there
is no need to use a double-pointer. The correct signature should be:
void k_mem_slab_free(struct k_mem_slab *slab, void *mem);
The issue with the current signature, although functional, is that it is
extremely confusing. I myself, a veteran Zephyr developer, was confused
by this parameter when looking at it recently.
All in-tree uses of the function have been adapted.
Fixes#61888.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Make sure we use the network interface name (if configured)
instead of device name when binding to certain network
interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add TLS_DTLS_CID socket option, which enables to use the Connection ID
extension for the DTLS session.
The option provides control of the use of CID with the `setsockopt()`
function. The value provided can disable, enable, and control whether to
provide a CID to the peer. It uses a random self CID (if told to provide
one to the peer) unless TLS_DTLS_CID_VALUE set previously.
Add TLS_DTLS_CID_VALUE to get or set the CID sent to the peer, if any.
Add TLS_DTLS_PEER_CID_VALUE to get the CID value provided by the peer,
if any.
Add TLS_DTLS_CID_STATUS to determine if CID used, and whether
bidirectional or one way.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
getsockname() did not work properly on bound sockets, as it verified
whether the socket has an active connection before retuning result. This
is not correct, as socket after bound may not have a connection yet.
Fix this, by verifying that local_addr on an underlying net_context is
set, to determine whether socket has a local address assigned, before
returning result.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
* Renamed 'coap_client_init_path_options' to
'coap_packet_set_path'
* Moved into 'coap.c'
* The function is public now
Signed-off-by: Georgij Cernysiov <geo.cgv@gmail.com>
Fix options initialization for path and query
when a final segment is one character long.
For example, "a/b" inits path as ["a"] instead
of expected ["a", "b"]. The same applies to
query option. The "a/abc?a&b" options won't
contain "b".
Signed-off-by: Georgij Cernysiov <geo.cgv@gmail.com>
The previous patch to address race condition on STREAM sockets had a
side effect on DGRAM socket, where net_context_recv() is not only
installing recv callback, but also registering a connection at net_conn
level. Doing so before setting remote address first (which is done in
net_context_connect()) had an impact on the connected DGRAM socket
operation, which now accepted packets from any remote peer, and not only
the one socket was connected to.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When resource data length is set to zero, we still need to
ensure that string reading will return an empty string.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
There are a few structs, unions, and enums where -Wshadow would
complain. Since names being the same are intentional, we need
to tell compiler to ignore -Wshadow for those names.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The `ioctl()` interface is already supported by the network
subsystem but there was no `zsock_` interface available for it.
Add the `zsock_ioctl()` syscall.
Implement two somewhat commont ioctl requests for socket
file descriptors; namely
- `FIONBIO` set non-blocking I/O mode
- `FIONREAD` get the number of available bytes
In the process, added `net_pkt_ip_proto_hdr_len()`
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
In order to get a semi-accurate assessment of how many
bytes are available on a socket prior to performing a read,
BSD and POSIX systems have typically used
`ioctl(fd, FIONREAD, &avail)`
We can support this in Zephyr as well with little effort, so
add support for `socketpair()` sockets as an example.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Previously, if a net_context had multiple packets already in
the receive queue, and a call to zsock_recvfrom() was made with
a buffer large enough to receive content from multiple packets,
only the content from a single receive buffer would be received.
Since zsock_recvfrom() is a system call, which has a
non-negligible overhead, it makes sense to receive as many bytes
as possible per system call.
Add zsock_recv_stream_immediate() as a shorthand for
"fill this receive buffer with as many bytes as possible without
blocking". Allow nullable buffer parameters so that we can also
have a shorthand for "count how many bytes are immediately
available".
With minor refactoring, zsock_recv_stream_timed() is a simple
wrapper around zsock_recv_stream_immediate() that handles timing
and error conditions.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
The added function allows to check if a descriptive block
option was already added to a message.
Signed-off-by: Lukas Woodtli <lukas.woodtli@husqvarnagroup.com>
In some cases the options of a CoAP message are reused for
block transfer. Then the block header needs to be updated.
The current approach is to remove the old block option and
add an updated one.
Signed-off-by: Lukas Woodtli <lukas.woodtli@husqvarnagroup.com>
The provided function allows to remove a CoAP option in a
message. This is useful for reusing parts of a message.
Signed-off-by: Lukas Woodtli <lukas.woodtli@husqvarnagroup.com>
The reply callback doesn't need to handle the case when the
code of the reply is 'continue' (2.31). In that case the callback
is not executed until the last block is transmitted.
Signed-off-by: Lukas Woodtli <lukas.woodtli@husqvarnagroup.com>
When using block-wise transfer, call the reply callback only when
the last block arrived.
Signed-off-by: Lukas Woodtli <lukas.woodtli@husqvarnagroup.com>
Fix possible race conditions when state and results are written
by locking the registry, so a first write does not cause Notify
message to be send too early.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
When the protocol layer like TCP is blocking transmission, the socket
layer will attempt and wait for a maximum amount of time before returning
with an ENOBUFS error.
This change allows to set the maximum waiting time from the configuration
file instead of using a fixed 10 second value.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
Bootstrap executable cause socket to be closed, so
it requires some delay for Ack to be send out as well.
Similarly, add small delay for Update trigger, so the
possible Ack goes out before the actual update message.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
When BOOTSTRAP FINNISH message was received, it caused
engine to immediately switch to BOOTSTRAP_TRANS_DONE state
which then closed the connection.
Ack packet was still on the send-queue so it never got send before close().
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Some state changes were do by directly writing into
client.engine_state variable, followed by call next_event_at(0);
This causes hard-to-find side effects.
Refactor all state transitions to use set_sm_state() to have better
control for it.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Updates NET_SOCKETS_TLS_MAX_APP_PROTOCOLS Kconfig option description to use
DTLS instead of DTL.
Signed-off-by: Daniel Mangum <georgedanielmangum@gmail.com>
* Create submenu for protocol versions.
Like LwM2M 1.0 vs 1.1. Object versions.
* Create submenu for engine features.
Containing all engine tweaks that are not directly from
protocol specification.
* Create submenu for all memory tuning options.
For example maximum number of certain objects, buffer
sizes, etc.
* Order all objects by object ID and show the ID in
title.
* When multiple options depend on same feature, group
them under if <option> ... endif. Preferably directly
after the selection itself.
* Move IPSO and uCIFI menuentries one sublevel up.
* Drop deprecated entries to bottom.
No functional changes, just clean up of Kconfig menu.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Use 64bit timestamps from k_uptime_get() so they don't
roll over during the expected device lifetime.
Fixes#60826
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Engine now allows registering service callbacks that are
called only once on a given timestamp.
This allows tickless services to be developed.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Allow socket-loop to wake up immediately, if there are changes,
instead of waiting for zsock_poll() to timeout.
This change makes engine more reactive and removes
hard coded timeout from zsock_poll().
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
When the target board does not have heap by default, allows
statically reserving the space for required socketpairs.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
The initial goal was to remove sys_clock_timeout_end_calc(). However,
several related issues have been fixed as well.
First this:
int64_t print_interval = sys_clock_timeout_end_calc(K_SECONDS(1));
/* Print log every seconds */
int64_t print_info = print_interval - k_uptime_ticks();
if (print_info <= 0) {
[...]
}
The above condition will simply never be true.
Then there is lots of back-and-forth time conversions using expensive
base-10 divisions for each loop iterations which is likely to impact
performance.
Let's do the time conversion only once outside the loop and track
everything in terms of ticks within the loop. Also the various timeouts
are open-coded based on the absolute uptime tick so to sample it only
once per round. Using sys_timepoint_calc() and sys_timepoint_timeout()
would have introduced additional uptime tick sampling which implies the
overhead of a downstream lock each time for no gain. For those reasons,
open coding those timeouts bears more benefits in this particular case
compared to using the timepoint API.
Then this:
secs = k_ticks_to_ms_ceil32(loop_time) / 1000U;
usecs = k_ticks_to_us_ceil32(loop_time) - secs * USEC_PER_SEC;
The above should round down not up to work accurately. And the usecs
value will become garbage past 1.2 hour of runtime due to overflows.
And no need to clamp the wait period which is on the microsec scale
using the total duration argument being on the millisec scale. That's
yet more loop overhead that can be omitted. The actual duration is
recorded at the end anyway.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The TLS credentials libraries are purely software constructs with no
external dependencies, run them immediately after the kernel setup to
allow other initialisation functions to add credentials without the
requirement to run in the back half of the `APPLICATION` priority.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
When PMAX value is changed, it should update all events.
I believe there is a bug that caused the code only to update
events that are ongoing (to be send).
Now if PMAX changes, next event timestamp is recalculated.
Fixes#59397
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
The signal strength for the connectivity monitor was
defined as int8_t, however this was too small for
LTE RSRP values, which has range [-140,-44].
Signed-off-by: Jarno Lämsä <jarno.lamsa@nordicsemi.no>
Use only single thread for handling polling of the sockets.
Each client will have only 1 active socket which to poll.
Each client can have multiple simultaneous requests ongoing.
The client only has one buffer for receiving and one buffer for sending.
Therefore the messages are reformed when resending.
Signed-off-by: Jarno Lämsä <jarno.lamsa@nordicsemi.no>
Lwm2m firmware object have defined a write of zero length
string as a cancel operation.
So allow lwm2m_set_opaque(path, NULL, 0);
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Pause and resume functionality was written into assumption
that sockets are closed before resuming.
With use new options CONFIG_LWM2M_RD_CLIENT_STOP_POLLING_AT_IDLE
or CONFIG_LWM2M_RD_CLIENT_LISTEN_AT_IDLE this is not always true.
Fix the state machine, so that on those cases, sockets are not
closed and resume is always similar like from the QUEUE mode.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Add support for using X509 certificates.
Default settings use ECDSA certificates with SHA256 hash.
When different settings are required clients should overwrite
struct lwm2m_ctx->load_credentials() and
struct lwm2m_ctx->set_socketoptions()
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
When writing string data to resources which are string types,
we should count in the terminating character into the data length.
Corner cases exist where LwM2M resource type is opaque but
lwm2m_get_string() or lwm2m_set_string() are used to read/write
the data. We must ensure string termination on those case, but
terminating character must not be stored in the engine buffer
or counted in the data length as this might be considered
as part of the binary data.
Fixes#59196
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Add a new Kconfig parameter NET_CONFIG_MY_VLAN_ID as initial network
configuration to enable users to set VLAN identifier at startup.
Add a new setup_vlan(...) function to setup the VLAN identifier in
the device, the call have an effect only when NET_CONFIG_MY_VLAN_ID
is above zero.
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
websocket_disconnect api does not closes mqtt's tcp socket, so
tcp socket must be closed after done.
Signed-off-by: Saravanan Sekar <saravanan@linumiz.com>
The websocket_connect api expects connected tcp socket, do not close
the user supplied socket so that the caller can re-use it if needed.
Signed-off-by: Saravanan Sekar <saravanan@linumiz.com>
This adds a few line use zephyr_syscall_header() to include
headers containing syscall function prototypes.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Fix corner case when client RX request with same token than
own request where it wait responses.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
Compiling an application with CONFIG_NET_ZPERF=y leaving
CONFIG_ZPERF_WORK_Q_THREAD_PRIORITY at its default value would
systematically cause a kernel panic during thread initialization.
The Kconfig variable is NUM_PREEMPT_PRIORITIES by default. Application
threads may not define a priority lower than NUM_PREEMPT_PRIORITIES - 1,
though.
This change limits zperf's thread priority to a valid range. It does not
change the default value as it makes sense to default the thread
priority to the lowest possible value (which is NUM_PREEMPT_PRIORITIES)
but Kconfig does not allow for arithmentic. So the combination of
CLAMP() plus the Kconfig default will ensure min priority plus limit the
range to valid values no matter what has been defined as priority in
Kconfig.
Fixes: #59141
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Coverity reported potential issues with implicit signed/unsigned type
conversions and potential problems with this. Fix this, by casing the
byte-shifted data variable to uint64_t type explicitly.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Coverity reported that assigning ret = 0 is pointless, as in any
scenario (loop continues or ends) the ret variable is overwritten
anyway, w/o using the assigned value. Therefore remove the needless
assignment.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
obj_inst_id should not be used directly to index the instance array, as
the instance ID is not tightly bound to the maximum instance count and
can exceed this value, causing out-of-bound access.
Therefore, perform some extra validation when choosing the array index
for the object instance to make sure we stay in the array bounds, or
return an error if there's no more room for more object instances, in a
similar way it's done for Security object.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The port we are connecting to is stored in network byte order,
thus, we need to convert it to the CPU's byte order before logging
Signed-off-by: Mark Oude Elberink <mark@oude-elberink.de>
In order to support external IP stacks that might have Connection
ID support, the LwM2M engine should allow client to bypass default
behaviour.
New set_socketoptions() callback added into client context
that allows overriding all socket opetions. This is called
after a socket is opened, but before the connect() is
called. This cannot be combined with load_credentials() callback
on all platforms as for example nRF91 requires modem offline
when credentials are written. This would cause socket to be closed
as well.
Second change is that we allow fine tuning of what we do with
socket handle when QUEUE mode is enabled and engine enters idle
state.
First option would be to close the socket. That would cause
TLS Alert(Close Notify) to be send. This is a band choice if
LTE modem was already in PSM or eDRX power saving mode.
Second option would be to delay socket closing until we
are going to send LwM2M update. There TLS Alert is also send,
but most probably lost due to NAT mapping timed out. This
is a best choice for LTE modem with DTL session cache enabled.
Two new options are to keep socket open, and either stop listening
or just keep listening. Both of these options work fine when
we have DTLS Connection ID support.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
In case lwm2m_socket_start() internal error, it should only do cleanup
on the socket, i. e. call lwm2m_socket_close(), not lwm2m_engine_stop().
The latter resets the entire lwm2m_context, which results in removal of
active observations.
This should not be done, as it collides with the RD client logic, where
connection resumption may skip the full registration phase, in result
not notifying the server that it should restart the observations.
At the same time, the RD client should clean the lwm2m_context when it's
done trying to update the registration and proceeds with regular
registration/bootstrap in the network error handler. In that case, only
the socket was closed, so the lwm2m_context needs to be reset
separately.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The number of buffer provided was verified in the final else block of a
long validation sequence. It would never be executed though, as one of
the conditions before would always evaluate to true.
As the number of buffers provided verification appears to be significant
in this case, as the buffers are referenced during other validations,
move this check at the beginning of the sequence instead. This also
eliminates the dead-code problem.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In theory, coap_header_get_token() should only be used on already parsed
packets, and coap_packet_parse() would detect an invalid token length in
a packet. Coverity however complains about possible out-of-bound access,
as in theory the function can return token length up to 15. Therefore
add an extra validation of the token length within the function, to
avoid out-of-bound access due to programming errors and to make Coverity
happy.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Although websocket_recv_msg function accepts timeout parameter, the
functionality was rather limited, allowing only to either work in
non-blocking manner, or to block indefinitely. Any timeout value
other than -1 (forever) ended up in non-blocking operation.
This PR fixes this by implementing a basic timeout mechanism, built on
top of poll(). For now on, only timeout of 0 will result in non-blocking
operation, any other timeout will make the function block for the
specified amount of time.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In order to allow the TLS accept() call to be interrupted, it should
release the top-level TLS socket mutex before blocking. As the
underlying TCP accept() makes no use of TLS resources, and has its own
mutex protection, it should be safe to do so.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The accept() so far would block with mutex held, making it impossible to
interrupt it from another thread when the socket was closed.
Fix this, by reusing the condvar mechanism used for receiving. It's OK
to use the same routine, as underneath accept() is monitoring the same
FIFO as recv().
Additionally, simplify k_fifo_get() handling in accept() - as the
waiting now takes place on condvar, it can be used in a non-blocking
manner. Blocking accept() call should not reach this place if there's no
new incoming connection waiting on the FIFO.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Installing recv callback with net_context_recv() after
net_context_connect() left an opening for a possible race - in case the
server send some data immediately after establishing TCP connection, and
Zephyr did not manage to install the callback on time, the data would be
lost, corrupting the stream.
This can be avoided, by installing the recv callback before the
connection is triggered. As net_context_recv() called w/o timeout only
registers the callback function, it should have no negative impact. The
only change on the TCP side is when the connection is closed - in case
TCP is in connect stage, do not call the recv callback (before this
change it'd be NULL at that point).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The coap client takes requests and provides responses
asynchronously to callback given in a request.
Currently supports only 1 request at a time.
Signed-off-by: Jarno Lämsä <jarno.lamsa@nordicsemi.no>
In case recv() call was waiting for data, and the socket was closed from
another thread, the recv() call would not be interrupted, causing the
receiving thread to be blocked indefinitely.
Fix this, by signalling the condvar the recv() call is waiting on
close(). Additionally, close will now set the socket into error mode,
with EINTR as the error condition, allowing the blocked calls to
recognise that the call was interrupted, and return a proper error code
on the event.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Until now iterable sections APIs have been part of the toolchain
(common) headers. They are not strictly related to a toolchain, they
just rely on linker providing support for sections. Most files relied on
indirect includes to access the API, now, it is included as needed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
After sending a CoAP block and receiving the CONTINUE response
code the next block is sent.
Signed-off-by: Lukas Woodtli <lukas.woodtli@husqvarnagroup.com>
Allow to use a buffer for the complete message body if block transfer is
enabled. This buffer is used when serializing the message. For sending
the message the body is split into blocks.
Signed-off-by: Lukas Woodtli <lukas.woodtli@husqvarnagroup.com>
The function gets the the BLOCK1 option from a received message
and extracts the block number, block size and has-more flag from
it.
Signed-off-by: Lukas Woodtli <lukas.woodtli@husqvarnagroup.com>
The function adds a block option to a CoAP message. If the message
is a request the BLOCK1 option is added. Otherwise (response) the
BLOCK2 option is added.
Signed-off-by: Lukas Woodtli <lukas.woodtli@husqvarnagroup.com>
Since conn_mgr is a subsystem rather than a library, relocate it
directly into subsys/net rather than subsys/net/lib/
Rename header files to better match their function.
Remove net_ prefix from conn_mgr types, API, and files, since it is
unnecessary.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
Add new network interface flag, which allows to disable Neighbour
Discovery protocol from being used on the interface. This allows to
interfaces that do not support ND (like OpenThread) to coexist with
other IPv6 interfaces.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Fixes the compiler error that occurs when attempting to build
the SNTP library with CONFIG_NET_SOCKETS_POSIX_NAMES=n, while
using native_posix.
Closes#57133
Co-authored-by: Chris Friedt <cfriedt@meta.com>
Signed-off-by: Hein Wessels <heinwessels93@gmail.com>
This commit simplifies the arguments for sending dns responses
and fixes an issue where both the ipv4 and ipv6 member of a header
union were accessed.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Duplicate logging prints make it hard to find the origin.
This commit does a cleanup of the debug messages printed.
Also change the level of an invalid record to debug as this
is out of our control.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
For offloaded iface net_tcp_get is never called, so context->tcp
is always NULL. In that case net_tcp_tx_sem_get will return wrong pointer.
For pollout k_poll will be called with NULL semph,
which cause HardFault.
Signed-off-by: Wojciech Slenska <wsl@trackunit.com>
Do patch file application before clang-format.
Add copyright to generated files using the --file-header option in zcbor.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
Allows L2s to declare generic association/connection routines
that can be bound by name to ifaces.
Allows L2-agnostic control over connectivity/association for
iface that support it.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
Calls put instead of unref on net contexts
in the socket accept function.
Mere unref didn't subtract the reference
count of net context which leaves
it in used state. This situation happens
in case of accepting already
closed connection.
Signed-off-by: Daniel Nejezchleb <dnejezchleb@hwg.cz>
Added a feature of socket connect
being asynchronous. If socket is set
to nonblock with O_NONBLOCK flag,
then connect() is non-blocking aswell.
App can normally poll the socket to
test when the connection is established.
Signed-off-by: Daniel Nejezchleb <dnejezchleb@hwg.cz>
Some utility functions belong to lwm2m_util.c.
Block contexts belong to lwm2m_message_handling.c
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
The init infrastructure, found in `init.h`, is currently used by:
- `SYS_INIT`: to call functions before `main`
- `DEVICE_*`: to initialize devices
They are all sorted according to an initialization level + a priority.
`SYS_INIT` calls are really orthogonal to devices, however, the required
function signature requires a `const struct device *dev` as a first
argument. The only reason for that is because the same init machinery is
used by devices, so we have something like:
```c
struct init_entry {
int (*init)(const struct device *dev);
/* only set by DEVICE_*, otherwise NULL */
const struct device *dev;
}
```
As a result, we end up with such weird/ugly pattern:
```c
static int my_init(const struct device *dev)
{
/* always NULL! add ARG_UNUSED to avoid compiler warning */
ARG_UNUSED(dev);
...
}
```
This is really a result of poor internals isolation. This patch proposes
a to make init entries more flexible so that they can accept sytem
initialization calls like this:
```c
static int my_init(void)
{
...
}
```
This is achieved using a union:
```c
union init_function {
/* for SYS_INIT, used when init_entry.dev == NULL */
int (*sys)(void);
/* for DEVICE*, used when init_entry.dev != NULL */
int (*dev)(const struct device *dev);
};
struct init_entry {
/* stores init function (either for SYS_INIT or DEVICE*)
union init_function init_fn;
/* stores device pointer for DEVICE*, NULL for SYS_INIT. Allows
* to know which union entry to call.
*/
const struct device *dev;
}
```
This solution **does not increase ROM usage**, and allows to offer clean
public APIs for both SYS_INIT and DEVICE*. Note that however, init
machinery keeps a coupling with devices.
**NOTE**: This is a breaking change! All `SYS_INIT` functions will need
to be converted to the new signature. See the script offered in the
following commit.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
init: convert SYS_INIT functions to the new signature
Conversion scripted using scripts/utils/migrate_sys_init.py.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
manifest: update projects for SYS_INIT changes
Update modules with updated SYS_INIT calls:
- hal_ti
- lvgl
- sof
- TraceRecorderSource
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
tests: devicetree: devices: adjust test
Adjust test according to the recently introduced SYS_INIT
infrastructure.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
tests: kernel: threads: adjust SYS_INIT call
Adjust to the new signature: int (*init_fn)(void);
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Currently, the handshake operation could only be fully blocking or
non-blocking. This did not play well if SO_RCVTIMEO was set for DTLS
server, as the recv() call where the blocking handshake was used, could
block indefinitely, ignoring the timeout parameter. Fix this, by
allowing for the handshake operation to timeout.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As the underlying socket operations for TLS/DTLS are now non-blocking,
it's no longer possible to rely on the underlying socket timeout
handling. Instead, implement SO_RCVTIMEO/SO_SNDTIMEO at the TLS socket
layer.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As for TLS, switch to use non-blocking operations on underlying socket.
This is a bit tricker for DTLS, as there were not truly blocking bio
(binary input/output) function for DTLS, as timeout had to been
implemented. It is possible though to implement non-blocking mbedTLS bio
function instead, and handle timeout outside of mbedTLS context, which
has been done in this commit.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Switch TLS sockets to use non-blocking socket operations underneath.
This allows to implement the socket blocking outside of the mbedTLS
context (using poll()), and therefore release the mutex for the time the
underlying socket is waiting for data. In result, it's now possible to
do blocking TLS RX/TX operations simultaneously from separate threads.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Implement ZFD_IOCTL_SET_LOCK so that TLS socket layer gets access to the
mutex protecting socket calls.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If server or bootstrap writes a lifetime value less than
configured default lifetime, client will automatically overwrite
the value with default one.
This gives better control for the application where client
behaviour is fine tuned on the Kconfig, but default values
from bootstrap server cannot be fine-tuned.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
This function had only one use in SenML CBOR formatter and it
contained some specific tweaks, so move the function to be a
static member of that module.
Fixes#53674
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
When LwM2M engine is paused, stop functionality just
marks the intent and when we resume, it will send the
de-registration if that was requested.
Otherwise it will stay in SUSPENDED state until resumed
and then goes into ENGINE_DEREGISTERED -> IDLE.
This also removes the blocking loop from lwm2m_rd_client_stop().
It does not need to block because lwm2m_rd_client_start()
is already checking if client is in IDLE.
Fixes#56254
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Instead of passing the test parameters to the websocket function, by
casting the pointer to integer (which may not work on 64-bit platform
due to int/pointer size mismatch), let the test allocate a file
descriptor, and initialize it with test context. The tested functions
expect a file descriptor as an argument anyway, so it's a more intuitive
approach.
The conditional test code within WS implementation can retrieve the test
context by using FD APIs to obtain the object represented by the FD.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
C only permits labels on statements, not declarations. Separate the
declarations from the assignments so that the labels can target
statements instead.
Signed-off-by: Keith Packard <keithp@keithp.com>
We get compile warnings of the form:
error: converting the result of
'<<' to a boolean; did you mean
'((__aeabi_ctype_table_ + 1)[(byte)] << 28) != 0'?
[-Werror,-Wint-in-bool-context]
if (!isprint(byte)) {
^
Since isprint (and the other is* functions) return an int, change check
to an explicit test against the return value.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
We get compile warnings of the form:
error: converting the result of
'<<' to a boolean; did you mean
'((__aeabi_ctype_table_ + 1)[(byte)] << 28) != 0'?
[-Werror,-Wint-in-bool-context]
if (!isprint(byte)) {
^
Since isprint (and the other is* functions) return an int, change check
to an explicit test against the return value.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Add is_suspended() routine to have control over the rd client from the
outside whether it is suspended.
Signed-off-by: Andreas Chmielewski <andreas.chmielewski@grandcentrix.net>
Socketpair functionality has matured enough to be used in a
consistent way now regardless of architecture or platform,
even on `native_posix`.
Remove the experimental status to reflect that.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
The TX timeout configured with SO_SNDTIMEO on a socket did not work
properly. If the timeout was set on a socket, the TX would work as if
the socket was put into non-blocking mode. This commit fixes this.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The timeout recalculation logic was duplicated across several routines,
therefore it makes sense to make a helper function out of it,
especially, that the same functionality would be needed for the send
routines.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Currently the zperf_tcp_receiver can handle only one TCP connection
each time, modify the code to poll and handle multiple connections.
Take the occasion to unify the bind and listen part of the code
between ipv4 and ipv6 part using a structure introduced to handle
the multiple connections.
Now in case the zsock_recv fails, we can't stop every connection
and fail through the error label, so just print the error message
and report the failure through the callback.
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Reduce the scope of in4_addr_my and in6_addr_my pointer variables
that are currently global, but they are used only inside
tcp_receiver_thread.
Take the occasion to fix a typo in one error message.
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Cast pointer to `void *` for `%p` parameter.
Otherwise lots of warnings in the log like below:
`<wrn> cbprintf_package: (unsigned) char * used for %p argument.
It's recommended to cast it to void * because it may cause
misbehavior in certain configurations. String:"%s: (%p): >>
length:0x%08x cur:%p, end:%p" argument:3`
Signed-off-by: Jun Qing Zou <jun.qing.zou@nordicsemi.no>
In dns_resolve_reconfigure() check if the DNS servers already exist
before cancel all ongoing queries. This will solve an issue with
getaddrinfo() returning DNS_EAI_CANCELED when receiving a retransmitted
DHCP offer and when receiving a IPv6 Router Advertisement.
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
The multi resource and create flags were reversed, meaning that resources
were defined as multi resource but weren't being created by default. That
doesn't reflect the LWM2M Software Management, which specifies which
objects can be multi resource and which are mandatory.
The post write callbacks were assigned to the validate callbacks.
Signed-off-by: Michal Ciesielski <michal.m.ciesielski@voiapp.io>
1. `zsock_socket()` gets the right packet familiy.
2. `inet_pton()` returns 1 on success.
This should address #55193.
Signed-off-by: Sebastian Arnd <sebastianarnd@gmail.com>
Provide a means of declaring zero or more HTTP services, each
with zero or more static HTTP resources.
Static HTTP resources are those which have fixed paths[1] which
are known prior to system initialization. Some examples of
static http resources would be
* a forwarder from '/' to '/index.html'
* a REST endpoint with fixed path '/api/foo' and detail
pointing at some implementation-specific function
* a Javascript file in string form with fixed path '/js/util.js'
* a 'construction' image with path '/res/work.png'
* a gzip-compressed 'Hello' HTML file at '/hello.html'
Without describing in any detail how static HTTP resources are
organized or served by any given HTTP server, we can describe
what static resources exist on a system in a common way that
does not require any optional facilities (e.g. filesystem) and
relies only on addressable memory.
Additionally, for the purposes of simply allowing others
to implement custom HTTP servers in a consistent way, or
benchmarking implementations, or having a consistent testsuite
to use across multiple implementations, it is helpful to have
a common method to declare HTTP services and static resources
for Zephyr.
[1] https://en.wikipedia.org/wiki/URL
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Allow to register a callback function which is called when a firmware
update is canceled by the cancel command.
Signed-off-by: Marc Lasch <marc.lasch@husqvarnagroup.com>
Use internal constant ZSOCK_POLLIN instead of POLLIN to
make the http_client source file compile without error with
CONFIG_NET_SOCKETS_POSIX_NAMES disabled.
Fixes#55423
Signed-off-by: Lucas Dietrich <ld.adecy@gmail.com>
When a query is done, the query isn't set to NULL.
This can cause a nullptr exception in invoke_query_callback().
Signed-off-by: Jeroen van Dooren <jeroen.van.dooren@nobleo.nl>
Currently, in tcp_received function defined in zperf_tcp_receiver
module, the assignment of session->state to STATE_COMPLETED is
overwritten on the same path to STATE_NULL and a session is
considered free for both STATE_COMPLETED and STATE_NULL, so remove
the assignment to STATE_NULL.
Remove the break from the STATE_COMPLETED case handling so that it
can fallthrough, in case the same session is used after finish.
Remove also the STATE_LAST_PACKET_RECEIVED case because this state
is never reached.
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
The modules zperf_udp_receiver and zperf_tcp_receiver use two
different functions to get a zperf session to store the
statistics, there is a TODO comment in the zperf_session module
suggesting to unify that part.
So delete the get_tcp_session function and use get_session for
both TCP and UDP receiver module.
Delete sock field from struct session because it's not used
anymore.
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Currently the maximum number of zperf sessions handled is hardcoded
to 4, create a Kconfig parameter, with default value 4, to make the
maximum number of sessions configurable.
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Use client context to seperate buffer usage.
Use new `TFTP_EVT_DATA` event to send data to application.
Use new `TFTP_EVT_ERROR` event to report error to application.
Update `tftp_get()` and `tftp_put()` API to use the client context.
Signed-off-by: Jun Qing Zou <jun.qing.zou@nordicsemi.no>
Actually `execute_cb` is fed with an array of char* and the size of
that array, instead of a single char* buffer and its byte size.
This fix expects a single, already joined, optional shell argument and
feeds `execute_cb` with proper arguments.
Signed-off-by: Stefan Schwendeler <Stefan.Schwendeler@husqvarnagroup.com>
In the header the websocket protocol needs a SHA1 hash. This is
implemented using the mbedtls_sha1 function. Select the option
MBEDTLS_MAC_SHA1_ENABLED from the Kconfig of websocket to ensure this
function is build in.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
There was a corner case that last registration timestamp was used
to detect if we can try UPDATE instead of full registration.
When timestamp was not cleared and DNS resolving failed, it might
cause engine to skip the resolving and continue retrying an UPDATE
message until timeout.
Fixes#54504
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
When we have establised an DTLS handshake and try LwM2M Update,
if the server rejects it, we fall back to sending full registration
but when doing so, we should also clear out any observations.
It was intentional that we don't go to ENGINE_DO_REGISTRATION
state as that would close the socket and cause DTLS handshake.
Fixes#54974
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Only socket error that we should ignore is EAGAIN (EWOULDBLOCK),
others might be indicating that there are some serious errors
in network layer.
When network stack would block us, just drop the packet and
let CoAP layer handle the retrying.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
