OpenThread has changed it's behaviour in terms of prompt printing in the
CLI module. Previously it was only printed on the UART CLI backend, now
it's printed on every CLI backend. This results in a double prompt being
printed when combined with Zephyr shell (one from OT and other form
Zephyr).
This commit adds a temporary fix to prevent OT prompt from being printed
in Zehpyr shell. As a long term solution we should add an option to
OpenThread to allow to disable prompt on the output.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
During stack reset in RCP, the mac keys are resseting my calling
otPlatRadioSetMacKey with aKeyId == 0. aKeyId == 0 was not handling
properly since it is not valid for mac keys. This commit fixes it.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Change the wording of the warning printed when there is no entropy to
hopefully remove any doubt that there might be security in TLS without
an entropy source. TLS connections with insufficient entropy are
trivially decodable, and should not be relied on for any type of
security.
Signed-off-by: David Brown <david.brown@linaro.org>
net: lwm2m: When mbedtls CONFIG_MBEDTLS_SERVER_NAME_INDICATION is
enabled, a destination hostname must be passed to socket to properly
connect do lwm2m server.
Passing lwm2m context to lwm2m_parse_peerinfo
Signed-off-by: Jair Jack <jack@icatorze.com.br>
The device service creates a notification of the current time resource
every 10s. This commit adds the possibility to change this timer to a
different value thus giving more control over the way the device object
is notified.
Signed-off-by: Sebastian Salveter <sebastian.salveter@grandcentrix.net>
Firmware Update object did not initialise resources PkgName,
PkgVersion and Firmware Update Protocol Support. Initialise
Firmware Update Protocol Support on creation and report CoAP
as default transfer protocol.
Signed-off-by: Marin Jurjević <marin.jurjevic@hotmail.com>
`engine_remove_observer_by_path()` was not updated during some recent
LwM2M observer changes, still using the `engine_observer_list` which got
moved into the `lwm2m_context` structure. Update the function to align
with these changes.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
`ztls_socket_data_check()` function ignored a fact when
`mbedtls_ssl_read()` indicated that the underlying TCP connection was
closed. Fix this by returning `-ENOTCONN` in such case, allowing
`poll()` to detect such event.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Loop by LOOP_DIVIDER counts instead of the number of seconds
specified in the timeout.
Fixes#39672
Signed-off-by: Paul Gautreaux <paulgautreaux@fb.com>
There is no need to veirfy the result value of the strtol() operation,
as we copy the result to a 64 bit buffer anyway.
CID: 240696
Fixes#39810
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add a function to update the coap block context from a
packet, according to the block option enum provided.
The existing coap_next_block does not handle block1 transfers
properly because we need to inspect the block1 option
returned by the server. This function is reworked to make use
of the newly introduced one.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
According to RFC-7959:
When uploading with coap block1 requests the server may respond
with a size1 option (together with the response code 4.13).
This to indicate the maximum size the server is able and willing
to handle.
This commit changes the total_size in the current block context
being handled to the optional size1 option value from the server.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
The OpenThread stack uses uint32_t to calculate expiry time for
alarms, while comparing to zephyr's uint64_t uptime.
This commit fixes broken milliseconds alarms after ~49.7 days of
uptime.
Fixes#39704
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Based on on RFC 8132 -
PATCH and FETCH Methods for the Constrained Application Protocol (CoAP)
Signed-off-by: Veijo Pesonen <veijo.pesonen@nordicsemi.no>
Based on on RFC 8132 -
PATCH and FETCH Methods for the Constrained Application Protocol (CoAP)
Signed-off-by: Veijo Pesonen <veijo.pesonen@nordicsemi.no>
With the introduction of `EXPERIMENTAL` and `WARN_EXPERIMENTAL` in
Zephyr all subsys/net and drivers/ethernet/Kconfig.e1000 settings
having `[EXPERIMENTAL]` in their prompt has has been updated to include
`select EXPERIMENTAL` so that developers can enable warnings when
experimental features are enabled.
The following settings has EXPERIMENTAL removed as they are considered
mature:
- NET_OFFLOAD
- NET_PROMISCUOUS_MODE
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The condition checks whether the connection was established or not. The
return value should reflect that.
Signed-off-by: Caspar Friedrich <c.s.w.friedrich@gmail.com>
OpenThread has lately got an option to provide a custom
crypto backend that replaces the default, based on mbedTLS
API. Implement a backend based on ARM PSA crypto API that
is better suited for applications willing to take advantage
of the ARM trust zone technology.
Add Kconfig option: OPENTHREAD_CRYPTO_PSA_ENABLE which
enables that backend.
Also, another Kconfig option:
OPENTHREAD_PLATFORM_KEY_REFERENCES_ENABLE, implied by the
former, which enables usage of key references instead of
literal keys in OpenThread. It will eventually allow
OpenThread applications to keep sensitive data such as
encryption keys in the secure storage, accessible from the
secure world only.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
If a firmware update is fetched from a server, and no port number is set
in the URI (e.g. coap://example.com/fw_update), the client will try
to connect on the port specified by CONFIG_LWM2M_PEER_PORT.
If a port different from the peer port is to be used for firmware
update, this has to be set explicitly in the URI:
coap://example.com:5683/fw_update.
This fix adds CONFIG_LWM2M_FIRMWARE_PORT, which will be used when
fetching a firmware update without specifying the port number in the
URI.
Signed-off-by: Tjerand Bjornsen <tjerand.bjornsen@nordicsemi.no>
Replace the custom float32_value_t LwM2M type with native double, to
facilitate LwM2M API and improve floating point precission.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The irq_lock() usage here is incompatible with SMP systems, and one's
first reaction might be to convert it to a spinlock.
But are those irq_lock() instances really necessary?
Commit 6161ea2542 ("net: socket: socketpair: mitigate possible race
condition") doesn't say much:
> There was a possible race condition between sock_is_nonblock()
> and k_sem_take() in spair_read() and spair_write() that was
> mitigated.
A possible race without the irq_lock would be:
thread A thread B
| |
+ spair_write(): |
+ is_nonblock = sock_is_nonblock(spair); [false]
* [preemption here] |
| + spair_ioctl():
| + res = k_sem_take(&spair->sem, K_FOREVER);
| + [...]
| + spair->flags |= SPAIR_FLAG_NONBLOCK;
| * [preemption here]
+ res = k_sem_take(&spair->sem, K_NO_WAIT); [-1]
+ if (res < 0) { |
+ if (is_nonblock) { [skipped] }
* res = k_sem_take(&spair->sem, K_FOREVER); [blocks here]
| + [...]
But the version with irq_lock() isn't much better:
thread A thread B
| |
| + spair_ioctl():
| + res = k_sem_take(&spair->sem, K_FOREVER);
| + [...]
| * [preemption here]
+ spair_write(): |
+ irq_lock(); |
+ is_nonblock = sock_is_nonblock(spair); [false]
+ res = k_sem_take(&spair->sem, K_NO_WAIT); [-1]
+ irq_unlock(); |
* [preemption here] |
| + spair->flags |= SPAIR_FLAG_NONBLOCK;
| + [...]
| + k_sem_give(&spair->sem);
| + spair_read():
| + res = k_sem_take(&spair->sem, K_NO_WAIT);
| * [preemption here]
+ if (res < 0) { |
+ if (is_nonblock) { [skipped] }
* res = k_sem_take(&spair->sem, K_FOREVER); [blocks here]
In both cases the last k_sem_take(K_FOREVER) will block despite
SPAIR_FLAG_NONBLOCK being set at that moment. Other race scenarios
exist too, and on SMP they are even more likely.
The only guarantee provided by the irq_lock() is to make sure that
whenever the semaphore is acquired then the is_nonblock value is always
current. A better way to achieve that and be SMP compatible is to simply
move the initial sock_is_nonblock() *after* the k_sem_take() and remove
those irq_locks().
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
While adding support for service type enumeration, a regression was
introduced which prevented mDNS ptr query responses.
1. There was an off-by-one error with label size checking
2. Valid queries were failing to match in `dns_rec_match()` due to
not checking for either NULL or 0 "wildcard" port
Fixes#39284
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
From the OMA LwM2M Object and Resource Registry: "When the single Device
Object Instance is initiated, there is only one error code Resource
Instance whose value is equal to 0 that means no error."
This fix creates that initial error code resource instance, and makes
sure that it doesn't get deleted by the Reset Error Code resource.
Signed-off-by: Tjerand Bjornsen <tjerand.bjornsen@nordicsemi.no>
Mbed TLS 3.0 removes the definition for MBED_ERR_SSL_PEER_VERIFY_FAILED,
since non of its code ever returns that value. Since there isn't really
a perfect response, instead return a somewhat generic response
indicating this was unexpected.
Signed-off-by: David Brown <david.brown@linaro.org>
Several fields of structures in mbedTLS 3.0 are now private. To access
them directly is necessary to define MBEDTLS_ALLOW_PRIVATE_ACCESS.
That is a temporary fix, the proper solution is not access directly
but using proper API.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Implements mechanism similar to the one available in net/lib/sockets.c
(since the merge of #27054) in sockets_can to enable parallel rx/tx.
Fixes#38698
Signed-off-by: Mateusz Karlic <mkarlic@internships.antmicro.com>
Add an option to force close the LwM2M connection
instead of always trying to deregister.
If on a cellular connection and the connection is dropped,
deregistering will never complete and take a long time
before retries fail. This option allows the app to close the
socket and quickly re-establish the connection when the
network connection is available again.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
If blockwise transfer is not in use it must be possible to send bigger
CoAP messages than what is the block size used with blockwise transfers.
To compensate for the increased memory usage number of in-flight packets
allowed could be decreased.
Signed-off-by: Veijo Pesonen <veijo.pesonen@nordicsemi.no>
...range for LWM2M_COAP_BLOCK_SIZE.
The range has been set to start from 64 bytes and now the help text has
been brought up to date.
Signed-off-by: Veijo Pesonen <veijo.pesonen@nordicsemi.no>
Support DNS-SD Service Type Enumeration in the dns_sd library
and mdns_responder sample application.
For more information, please see Section 9, "Service Type
Enumeration" in RFC 6763.
https://datatracker.ietf.org/doc/html/rfc6763Fixes#38673
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
According to `sendmsg()` man pages, the `struct msghdr` can contain
empty records (iov_len equal to 0). Ignore them in TLS `sendmsg()`
implementation to avoid unnecessary calls to mbed TLS.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case zsock_sendmsg did not send all of the data requested, update the
`struct msghdr` content and retry.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When creating a socket, all of the registered socket implementation are
processed in a sequence, allowing to find appropriate socket
implementation for specified family/type/protocol. So far however,
the order of processing was not clearly defined, leaving ambiguity if
multiple implmentations supported the same set of parameters.
Fix this, by registering socket priority along with implementation. This
makes the processing order of particular socket implementations
explicit, giving more flexibility to the user, for example when it's
neeed to prioritze one implementation over another if they support the
same set of parameters.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As with IPv6, the mdns and llmnr responders should join their multicast
groups for IPv4 instead of just adding the multicast address to the
interface.
Signed-off-by: Markus Fuchs <markus.fuchs@ch.sauter-bc.com>
In case LwM2M server or bootstrap server rejected
Registration/Registration Update/Deregsitration attempt, there were no
reasonable notification to the application. Fix this by reporting
LWM2M_RD_CLIENT_EVENT_*_FAILURE in such case.
Addtitionaly, remove pointless ENGINE_DEREGISTER_FAILED event, which
have no use in the state machine.
Finally, simplify the response code logging to prevent code duplication.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The Counter resource in the IPSO Push Button object was incremented
silently by the post write handler of the State resource. This prevented
the resource from being marked as updated, effectively preventing
the engine from sending notifications to observers.
Fix this, by setting the new counter value with `lwm2m_engine_set_u64()`
instead. This will update the resource value, and trigger the engine to
send notifications if needed.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
HTTP_DATA_FINAL was incorrectly notified in case Content Length field
was present in the HTTP respone - in such case it was set for every
response fragment, not only the last one.
Fix this by relying on `message_complete` flag instead of
`http_should_keep_alive()` function to determine whether to notify
HTTP_DATA_FINAL or not. As the HTTP parser calls the
`on_message_complete()` callback in either case (response is chunked or
not), this seems to be a more reasonable apporach to determine whether
the fragment is final or not.
Additinally, instead of calling response callback for
`on_body`/`on_message_complete` separately, call it directly from
`http_wait_data()` function, after the parsing round. This fixes the
case when headers were not reported correctly when the provided buffer
was smaller than the total headers length, resulting in corrupted data
being reported to the user.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The helper function to conver 32-bit binary float value to
float32_value_t incorrectly identified the "hidden" bit, resulting in
invalid conversion when TLV encoding was used to write a resource
(the output value was divided by 2).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
There were several issues preventing JSON format writes to work
correctly:
1. The formatter wrongly assumed that Base Name and Relative Name values
read from the message are NULL terminated, which in result could give
invalid results when combining them.
2. The formatter wrongly assumed that Relative Name is always present,
which is not always the case. In result, it failed to parse messages,
which contained full path in their Base Name Field
3. There were no boundaries check when reading JSON variable name/value,
which could lead to buffer overflow in case malformed data was
received.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Just like plain text, JSON parser ignored leading zeros after decimal
point, giving invalid results. Fix this in a similar way as for the
plain text.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Floating point parser for plain text format was parsing floats wrongly,
ignoring leading zeros after decimal points.
Fix this, by reusing atof32() function, already avaialbe in a different
part of the engine, which did the parsing correctly.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
According to the specificaion, resources are not predefined to use 32 or
64 bit floating point numbers, but should rather accept any of them (as
indicated by the size of the TLV in the message). This lead to issues
for instance with Eclipse Leshan LWM2M server, where Leshan sent 64-bit
value, while Zephyr expected 32-bit, making it impossible to write
the resource.
Therefore, unify the float usage to 32-bit float representation and fix
the TLV parsing functions, to accept values sent as either 32 or 64 bit
float.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The `poll()` function did not report POLLHUP if the peer ended the DTLS
session, making it impossible to detect such event on the application
side.
On the other hand, TLS erroneusely reported POLLHUP along with each
POLLIN event, as the 0 returned by the `recv()` socket call was
wrongly interpreted (it was expected to get 0 in return as 0 bytes were
requested).
Fix this by introducing a helper function to process the mbedtls context
and verify if new application data is pendingi or session has ended.
Use this new function in the poll handler, instead of a socket `recv()`
call, to remove any ambiguity in the usage, for both TLS and DTLS.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Notify the application when DTLS client session ends by returning
ENOTCONN on such event. Additionally, reset the mbed TLS session
structures, allowing to reinstante the session on the next send() call.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
ECONNABORTED was returned in case tls_mbedtls_reset() function for
resetting session failed, which can be caused by memory shortage. Return
ENOMEM instead.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Since it's not possible to encode full range of 64-bit unsigned integer,
remove this type from the LwM2M implementation, and replace its uses
with 64-bit signed integer.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As the resource values represented by the unsigned integers were casted
to integers of a corresponding size in the read handler, they were not
ecoded properly if the unsigned value was larger than the maximum
integer value of the corresponding size (i.e. they were encoded as
negative values).
Fix this by casting the unsinged value to a wider integer type, to
prevent incorrect interpratetion of the data provided. The TLV encoding
functions take care of the optimization (i. e. encoding integers on the
minimum number of bytes needed), so it should prevent bandwith waste if
the unsigned value would actually fit into the integer of the
corresponding size.
Similar case is for the write hander, where unsigned integers encoded at
8 bytes were not processed correctly. Fix this by using wider decoder as
well.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Using zsock_ in http_client instead of the POSIX API versions of the
functions allows the usage of http_client in combination with
CONFIG_POSIX_API.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Function parameters can be checked without MQTT instance lock being
held. Additionally if NULL parameter would be passed (which this check
tries to handle), then function would return without releasing lock.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Sending of > 2k buffers leads to split socket writes.
Current implementation is not checking for full buffer size.
ztls_sendmsg_ctx proceeds to next iov on sucessful write.
Solution: Add loop into ztls_sendmsg_ctx to process whole buffer
before proceeding to next iov.
Signed-off-by: Pavlo Hamov <pasha.gamov@gmail.com>
Rework NCP interface configuration and NCP sample. Remove
CONFIG_OPENTHREAD_COPROCESSOR_SPINEL_ON_UART_DEV_NAME and
CONFIG_OPENTHREAD_COPROCESSOR_SPINEL_ON_UART_ACM Kconfig
options in favor of chosen node zephyr,ot-uart usage.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This migrates all the current iterable section usages to the external
API, dropping the "Z_" prefix:
Z_ITERABLE_SECTION_ROM
Z_ITERABLE_SECTION_ROM_GC_ALLOWED
Z_ITERABLE_SECTION_RAM
Z_ITERABLE_SECTION_RAM_GC_ALLOWED
Z_STRUCT_SECTION_ITERABLE
Z_STRUCT_SECTION_ITERABLE_ALTERNATE
Z_STRUCT_SECTION_FOREACH
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
When transmitting a frame, inform the radio driver whether
security processing and/or header updates are needed or not.
When a frame was transmitted, inform back to OpenThread whether
the security procedure and/or header updates were completed for
the frame or not.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
k_timeout_t was converted to ticks using a nonsense function
causing poll timeout corruption for offloaded sockets; this
commit uses ticks directly from the struct instead.
Fixes#37472
Signed-off-by: Emil Lindqvist <emil@lindq.gr>
According to MbedTLS API documentation, its session must be
reset if mbedtls_ssl_handshake returns timeout error. This
commit resets the session for said return value, and that
allows us to call send() multiple times even if handshake
times out for previous calls.
Fixes#35711
Signed-off-by: Emil Lindqvist <emil@lindq.gr>
Add missing otPlatTimeGet implementation which is needed for proper
calculation the time offset in host-RCP communication.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Fix potential bug when returning error codes not handled by
OpenThread in `otPlatRadioTxDone`.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
ZFD_IOCTL_POLL_OFFLOAD operation needed special handling, as it needed
to modify the fds table for the offloaded implementation, overwriting
websocket file descriptors with the underlying offloaded ones. This is
only needed for the offloaded sockets, as the native implmentation use
POLL_PREPARE/UPDATE operations instead.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The websocket implementation of ioctl wrongly passed websocket context
to the undrelying `ioctl` implementation instead of the context of the
underlying socket.
Additionally, currentl implementation used the vtable of the native
socket implementation unconditionally, making it unusable with an
offloaded underlying socket.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
A mutex is used to syncrhonize the start, stop and service() functions
of the RD client. Previously it could happen that while service() was
working on e.g. bootstrapping, a stop() call by another thread would
close the socket. Then the bootstrapping process would detect it as a
network error, and restart the process.
Fixes#37170.
Signed-off-by: Maik Vermeulen <maik.vermeulen@innotractor.com>
Check for the address family of the packet when setting the multicast
destination address used in the response. Current code checks either the
query type or the stack configuration, which can result in setting the
wrong type of address for the frame.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
In case a non-readable resource gets updated (either by the server or
with an API), it makes no sense to send a notification in such case, as
no such resources are not included in notifications anyway.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Flag that indicates if a given packet is being retransmitted has become
obsolete since more detailed flags were added. This commit removes the
flag and references to it altogether.
Signed-off-by: Jedrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
Fix `poll()` handling for DTLS clients when the underlying socket is an
offloaded socket. As in this case no `k_poll()` is used underneath, it's
not possible to monitor the handhshake status with `tls_established`
semaphore. Instead, do the following:
1. If no handhshake is in progress yet, just drop the incoming data -
it's the client who should initiate the handshake, any data incoming
before that should not be processed.
2. If handshake is currently in progress, lift the `POLLIN` flag and add
small delay to allow the other thread to proceed with the handshake.
3. Otherwise, just proceed as usual.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The TLS/DTLS handshake in most cases is a blocking process, therefore
the underlying socket should be in a blocking mode to prevent busy
looping in the handshake thread. Fix this by clearing the O_NONBLOCK
flag on the underlying socket before the handshake, and restoring it
afterards.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The openthread has enhanced features for periodic parent search,
this commit adds kconfig options to enable and configure these.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
`OT_LOG_LEVEL_NONE` has some uses within OpenThread but it is not
hanled in the Zephyr's platform implementation. This commit makes
use of those logs as `LOG_LEVEL_ERR` level.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
When zsock_close() is called, socket is freed before the mutex for the
socket is unlocked. If the freed socket is given to another thread
immediately, the mutex for the socket will be initialized by the new
socket owner, while the mutex is still locked by the thread calling
zosck_close().
Fixes#36568
Signed-off-by: Chih Hung Yu <chyu313@gmail.com>
Regular OpenThread upmerge to bring in a fix for a possible
infinite loop and support for DNS service subtypes.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
Instead of manually computing payload offset, let the CoAP library do
the work, and use the payload pointer returned by the
`coap_packet_get_payload()` function instead.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The function did not work correct for packets generated with Zephyr
APIs, as `max_len` holds the entire buffer size, not the actual packet
size.
Additionally, unify how Payload Marker is handled in the calculation -
currently the coap parsing function adds it to the `opt_len` field,
which is counter-intuitive.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
It is important that offset is set in the same manner, regardless of the
origin packet - it should indicate the final packet length in both
cases, when the packet is generated on the Zephyr side with CoAP APIs,
and when it's parsed from the UDP datagram. This allows for functions
like `coap_packet_get_payload()` to work correcty in both cases.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Rename `write_signal` to `readable` and `read_signal` to `writeable`
which are more meaningful to the actual states they represent, and make
the code analysis easier.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case read or write were called before the actual poll() call, the
poll() function was not signalled correctly about such events, which in
order could lead to a deadlock if the poll() was called with infinite
timeout.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This will fix a bug caused by creating a multi instance resource with
only a single resource. Previously this was treated as a single instance
resource. This is now properly treated as a multi instance resource with
one instance
Signed-off-by: Markus Rekdal <markus.rekdal@nordicsemi.no>
Add new custom transport type.
This allows user defined transport for MQTT communication.
The user must implement the transport procedure.
Fixes **#27015**
Signed-off-by: Vlad Tuhut <vlad.tuhut@raptor-technologies.ro>
coap_response_received returned NULL if the observe option was out of
order, however it makes more sense to return the coap_reply handler
without actually calling it.
Additionally the reorder check has been modified to partially match
the RFC.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
- bugfix: Accept initial tftp server reply from a port different than
the one used to establish the connection (typically 69) as mandated
by RFC 1350. Previous implementation was not standard compliant.
- bugfix: close socket in case of error or timeout.
- bugfix: Reset retransmit counter after receipt of a good packet.
- bugfix: Use CONFIG_TFTP_LOG_LEVEL to set log level.
- api: upon successful receipt of the file set `client.user_buf_size`
to the size of the file received.
- Restructure the code, comments.
- Limit usage of global variables.
- Limit usage of `goto`.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Added notify_timeout_cb to struct lwm2m_ctx to allow application to
handle notify timeout
Added lwm2m_rd_client_update to lwm2m.h to allow application to
trigger registration update
Added notify_message_timeout_cb which calls notify_timeout_cb from
struct lwm2m_ctx and logs an error message
Fixes#31499
Signed-off-by: John Power <john.power@xylem.com>
This commit fixes diag repeat command port by fixing issue with
incorrectly handled repeat timer.
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
Allow caller to specify microsecond accuracy and not convert
to milliseconds.
Fixes#36072
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make zsock_select() a syscall so that the following commit
can call the internal poll implementation directly. This is
needed as zsock_select() will not call zsock_poll() directly
in order to allow select to use microsecond timeout accuracy.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
After lwm2m async io was introduced with 32989a38f0,
one instance of function lwm2m_send_message() was left unchanged,
and makes build to fail when boostrap support is enabled.
Signed-off-by: Kiril Petrov <retfie@gmail.com>
Fixed issue that caused message to be not correctly reset even after
it is consumed after send sets errno to EAGAIN or EWOULDBLOCK
Signed-off-by: Dominik Dess <dominik.dess@grandcentrix.net>
The ieee802154_frame_retry will be set by the OpenThread integration
layer in the event of frame retransmission.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Fill the ACK timestamp field in nRF5 driver. This is required by
OpenThread for the proper CSL transmitter functioning.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Fixed mutli-IP DNS resolution as previously the same IP address was
used to populate all AI entries and added DNS_RESOLVER_AI_MAX_ENTRIES
config entry to define max number of IP addresses per DNS name to be
handled.
Signed-off-by: Ievgen Glinchuk <john.iceblink@gmail.com>
Use IE variable of ieee802154 MAC frame instead of Thread specific
configuration call for configuring injection of vendor specific
data into enh ack.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
this has a number of advantages:
- allows to only create notifications for each client if there are no
messages already waiting to be send, in practice prioritizing the
memory for messages for answers, thus staying more "responsive".
- saves a fair bit of memory by eliminationg now redundant client_ctx
pointer per observer.
- fixes a potential subtle bug: previously, an observer reset would've
stopped the first observation found with a matching token, which
might've belonged to a differen client.
Signed-off-by: Henning Fleddermann <henning.fleddermann@grandcentrix.net>
This restructures the lwm2m_engine to use a non-blocking socket access
instead of the previously used blocking style, and eliminates any
socket-access from outside of the main work loop.
The main motivation behind this is an issue within nordics
nrf_modem_lib/modem-fw on nrf9160, that leads to socket send() calls to
block indefinitely when the shared memory used for
rpc-communication with the modem is already exhausted because of
incoming data.
This lead to the lwm2m_engine locking up on send calls when there is
also a large amount of incoming data.
This works around this issue, by only issuing send calls when poll
reports the socket to be ready for sending, and (more importantly) by
always receiving all buffered incoming data before sending anything.
There might still be a (perhaps academic) possibility where this
situation might be triggered, when the scheduler interrupts the lwm2m
thread in-between receiving and sending, but for now we have not yet
observed this.
Besides working around the aforementioned issue, this also simplifies
the way resends are handled as they are no longer send from the main
system-workqueue, and limits all interaction with the sockets to a
single thread.
Signed-off-by: Henning Fleddermann <henning.fleddermann@grandcentrix.net>
Keys management API for IEEE 802.15.4 drivers was specific for Thread
protocol. With this change API is more generic and aligned with Thread
needs.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
Zephyr has introduced secure random generator API after the TLS sockets
were implemented. Use this new API in TLS sockets implementation,
instead of implementing secure RNG with mbedTLS in the module itself.
This facilitates integration of the HW RNG accelerators with the TLS
sockets module.
Signed-off-by: Frank Audun Kvamtrø <frank.kvamtro@nordicsemi.no>
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If radio driver supports transmission security we need an option
to disable transmission security which by default is done by OT stack
for Thread v1.2
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
OpenThread expects the FCS field at the end of the ACK frame to be
passed with `otPlatRadioTxDone`.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Not checking return code in fcntl can result in interpreting -1 as
flags, and cause unexpected behaviour.
Fixes#35541
Signed-off-by: Emil Lindqvist <emil@lindq.gr>
The k_fifo_ prefix is meant for kernel API functions, and
not to our socket helper. So remove the k_ prefix in order
to avoid confusion.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we are waiting all the data i.e., the MSG_WAITALL flag is set,
then if we have not yet received all the data at the end of the
receive loop. We must use the condition variable to get the signal
when the data is ready to be received. Otherwise the receive loop
will not release the socket lock and receive_cb will not be able
to indicate that data is received.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fix a regression when application is waiting data but does
not notice that because socket layer is not woken up.
This could happen because application was waiting condition
variable but the signal to wake the condvar came before the
wait started. Normally if there is constant flow of incoming
data to the socket, the signal would be given later. But if
the peer is waiting that Zephyr replies, there might be a
timeout at peer.
The solution is to add locking in socket receive callback so
that we only signal the condition variable after we have made
sure that the condition variable is actually waiting the data.
Fixes#34964
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The resource description on the OMA LwM2M registry states that only the
first instance of a particular error should trigger creation of a new
error code instance.
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
Call on_status if the Reason-Phrase is not provided.
This allows for the numeric status code to be set.
Also, ensure the numeric status code is always set
in on_status, not just if the specific callback is set.
Signed-off-by: Justin Morton <justin.morton@nordicsemi.no>
This was already implemented for firmware update packages.
For other opaque resources it failed to determine the target resource
id, which is now stored in the block_context.
Signed-off-by: Jan Buenker <jan.buenker@grandcentrix.net>
OpenThread shell tries to execute commands without checking
if the shell has already been initialized. As a result, we
may hit an assertion in the OpenThread CLI code. It's
particularly painful in automated tests which spawn commands
very early in the firmware boot process.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
After the recent OpenThread upmerge, OpenThread changed its behaviour in
terms of CLI handling during commissioning procedure. OpenThread will
now call the registered CLI callback when it recieves the Discovery
message.
This resulted in a crash if no CLI command was executed by the user
before, because the `shell_p` pointer was only set in the command
handler. As it was not set to the actual shell backend instance, it
caused a crash (or assert if enabled) in the `shell_vfprintf()`
function.
Fix this by verifying the `shell_p` pointer in the
`otConsoleOutputCallback()` function before use. Additionally, set the
pointer to the most common UART shell backed (if enabled) in the
initialization function so that the initial messages from OpenThread are
not dropped.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In Mbed TLS:
commit eccd88871767e2fba5f3a079cfdfcb77c376cf20
Author: Gilles Peskine <Gilles.Peskine@arm.com>
Date: Tue Mar 10 12:19:08 2020 +0100
Rename identifiers containing double-underscore
changes the name of a symbol we use. As part of upgrading to newer
versions of Mbed TLS, change the name of the symbol we use.
A better fix would be to not use this symbol at all, and perhaps define
our own symbol the same way this internal symbol is defined within the
library.
Signed-off-by: David Brown <david.brown@linaro.org>
This commit implements the OpenThread APIs to configure Enhanced-ACK
Based Probing in radio for a specific Initiator. This is needed for
Link Metrics functionality.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
This commit implements the missing OpenThread APIs related to CSL
receiver configuration.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Add extra check for the LwM2M client state, to allow triggering of the
Registration Update message only when registered.
This fixes an issue, when the `trigger_update` flag could be set during
the bootstrap procedure (when the value of the Lifetime resource was
set), which resulted in an uneccessary Registration Update message just
after the successful registration.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit implements the OpenThread APIs to configure a radio
reception slot at a specific time. This is needed for the correct
functioning of a CSL receiver.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
This commit implements the OpenThread APIs to pass MAC keys and
frame counter to the radio layer in order to process the
transmission security. This is needed for the correct functioning
of a CSL transmitter.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
The device has sent RESET_POWER_UP message before the communication
with the host hadn't been established. It could be observed with
pyspinel which displayed `Framing error`.
This commit fixes the bug by initializing NCP after the host stated
is ready to communicate.
This commit reverts initialization the USB stack into function
otPlatUartEnable to be consistent with others OpenThread platforms.
OpenThread co-processor samples are not affected by #27071 as they use
USB for SPINEL communication with host and not for UART console.
Note:
When co-processor communicates by USB CDC ACM and it is hard reset
(what is happening in current Zephyr OpenThread platform)
the connection needs to be properly handled by the host.
For posix platform used together with RCP it was implemented in:
https://github.com/openthread/openthread/pull/6454
and for NCP:
https://github.com/openthread/wpantund/pull/492 .
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
OpenThread modified its NCP API, so we need to align with these changes
in Zephyr.
One of the major changes was removal of UART from the platform APIs.
`openthread/platform/uart.h` header file was moved to
`examples/platforms/util/uart.h` so we need to use the new location in
Zephyr. This means that OpenThread no longer impose the UART API but for
the simplicity of the upmerge I've kept the UART APIs as they are for
now.
The NCP initialization function have now to register a send handler,
and the appropriate transport driver have to call NCP callbacks when
transmission/reception is done. For now, re-use the existing code of
the UART driver, just as the upstream NCP application does.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Use OpenThread mutex in order to protect OT CLI API call instead of
halting the OpenThread thread.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The OpenThread CLI API has changed therefore it's needed to align
OpenThread Shell implementation in Zephyr with these changes.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Since the API already has a function to create an LwM2M object instance,
it makes sense to add a corresponding delete funtion, allowing the
application to delete created objects.
Additionally, for the remote delete set the Registration Update trigger
only when not in bootstrap mode.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The Registration Update message should be sent whenever an object
instance is created or deleted. Currently this was only the case when an
object instance was created by the server and not by the application.
Fix this by triggerng the Registration Update from the API function
as well.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
So far there was no dedicated mechanism for replacing DNS servers with
new list. Add dns_resolve_reconfigure() API that allows to achieve that
in a thread-safe manner.
Introduce 3rd state in DNS context lifetime by converting from 'bool
is_used' to 'enum dns_resolve_context_state state'. This new
DEACTIVATING state allows to mark a DNS context as busy and safely close
context without holding lock. Closing DNS context with released lock
prevents deadlock in case net_context_close() has to synchronize with a
separate thread executing handler passed to net_context_recv() (which is
the case for example with ESP-AT WiFi driver).
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
ctx->is_used member seemed to be used sometimes within a mutex acquired
block, sometimes not. Make it consistent by always using it with
acquired mutex.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Reboot functionality has nothing to do with PM, so move it out to the
subsys/os folder.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Currently the lwm2m_path_log_strdup allocates a temporary buffer on a
stack, and then passes it to the log_strdup function to create a copy
of the string for the logger. log_strdup however will not copy the
string if for instance immediate logging is used, therefore the logging
function will still use the memory address of the already invalid buffer
allocated within lwm2m_path_log_strdup.
Fix this by passing an addittional `buf` parameter to the
lwm2m_path_log_strdup function, therefore allowing the user to provide
the buffer within a valid scope.
CID: 220536
Fixes#34005
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
zsock_select() cannot poll file descriptors with number >= 32.
When a whole word in FD_SET was skipped due to being empty,
corresponding fd number was not updated, leading to wrong
fd's being passed to poll().
Fixes#34563
Signed-off-by: Chih Hung Yu <chyu313@gmail.com>
This value is used to measure the RX/TX statistics. The previous
use of the timestamp field did not work in RX path as the timestamp
value could be overwritten by the driver if gPTP timestamping
is enabled. So to fix the RX statistics, use a separate field
for the create time.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add support for delayed transmission of frames for the CSL
Transmitter OpenThread function.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
This option was only able to collect statistics of transmitted
data. The same functionality is available if one sets the
CONFIG_NET_PKT_RXTIME_STATS and/or CONFIG_NET_PKT_TXTIME_STATS
options.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The RX statistics might not get updated properly because the used
ifdef was referring the TX options.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Query timeout handler is rescheduled if DNS context mutex is locked. So
far there was no timeout used, which means that work is simply put at
the end of system workqueue. This solves cases when mutex is locked by
any higher priority cooperative threads.
If however mutex was locked in application code within lower priority
thread (which is very likely) and query timeout has expired in the
meantime, then system workqueue is busy looping by calling query timeout
handler and trying to acquire DNS context lock.
Reschedule query timeout handler with 10ms delay, so that all
threads, including those with lower priorities, have a chance to move
forward and release DNS context lock.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
This library is coded with standard POSIX names for socket functions,
so make that requirement explicit.
Also, switch it from select'ing NET_SOCKETS, to depend'ing on it. This
follows the general approach of avoiding unneeded select's in Zephyr,
which lead to conflicting dependencies and make debugging dependencies
complex overall. In this particular case, it's fair (for a user) to
expect that "simple network time protocol" requires networking API,
namely sockets, and have that explicitly on in their app configuration,
giving better overview of their app config overall.
Fixes: #34165
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Made the LwM2M engine checks for pmin and pmax optional to adhere to
the LwM2M specificattion. We now first check that pmin and pmax are
actually set. Also changed the default CONFIG values for the attributes
pmin and pmax to 0 to indicate that they are not active by default.
Fixes#34329.
Signed-off-by: Maik Vermeulen <maik.vermeulen@innotractor.com>
The `init_string` array could have been used uninitialized, fix this
by initializing it as an empty string, which is a desired content in
case it's not overwritten.
CID: 220302
Fixes#33839
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add numeric http status code to the response struct to allow for
easier processing by the caller. Textual status already exists.
Signed-off-by: Justin Morton <justin.morton@nordicsemi.no>
This commit puts the radio in sleep mode when the diagnostics are
stopped.
This fixes an assert on MAC code when `ot diag stop` command is
issued while `ot diag send` is still ongoing.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Replace all existing deprecated API with the recommended alternative.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Zephyr socket subsystem has come a long way since initial experimental
alternative to internal Zephyr networking API. Its configuration also
mirrors the usual conservative approach, where a user needs to
explicitly enable options to get "more" features. And as an
experimental API, socket subsystem was initially developed as
namespaced API, where all functions/structures are prefixed with
"zsock_", and to get standard names, CONFIG_NET_SOCKETS_POSIX_NAMES
needs to be set (or alternatively, CONFIG_POSIX_API needs to be, which
enabled full POSIX subsys overall).
However, a few years later, sockets are the standard networking API,
and in majority of cases its used under the standard POSIX names.
Necessity to explicitly set an option to achieve this effects, and
confusion which results from it - are just unneeded chores for users.
So, switch CONFIG_NET_SOCKETS_POSIX_NAMES to be on by default (unless
CONFIG_POSIX_API is already defined). It still can be explicitly
disabled if needed (but usecases for that would be peculiar and rare).
Addresses #34165
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Add infrastructure to allow user to configure the system so that
all the network packets, that are sent to or received from a specific
network interface, are sent to remote system for analysis.
The captured network packets are placed as a payload in UDP packet,
which is then sent inside a tunnel to a remote host. The host can
then receive the packets and for example show them in wireshark.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Implement SO_BINDTODEVICE socket option which allows to bind an open
socket to a particular network interface. Once bound, the socket will
only send and receive packets through that interface.
For the TX path, simply avoid overwriting the interface pointer by
net_context_bind() in case it's already bound to an interface with an
option. For the RX path, drop the packet in case the connection handler
detects that the net_context associated with that connection is bound to
a different interface that the packet origin interface.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
An option has been added which can be passed to setsockopt
which allows the user to set & get the dtls handshake timeout,
either before first handshake or online.
Signed-off-by: Emil Lindqvist <emil@lindq.gr>
With these changes, dial up Zephyr application/driver can use
socket(AF_PACKET, SOCK_RAW, IPPROTO_RAW) for creating
a socket for sending/receiving data to/from ppp net link, i.e.
packet is going to/from PPP L2.
Signed-off-by: Jani Hirsimäki <jani.hirsimaki@nordicsemi.no>
The specification states that the server can cancel observations "at any
moment, by sendinga GET request with Observe option=1, the LwM2M Server
cancancel an “Observe”operation on a specified Resource, or specified
Object Instance(s)."
It does not mention any token matching requirement, but RFC 7641 does.
The correct interpretation is not obvious. The EMQx LwM2M implementation
uses a new token for instance, which does not work with Zephyrs token
matching cancel-observe.
This commit introduces cancel-observe via path matching as a Kconfig
option. This could hypothetically introduce problems when we are
connected to multiple peers simultaneously, but since that is not likely
to be supported for a long time (if ever), this change should be fairly
uncontroversial since path matching is only used as a fallback.
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
Current implementation of poll prepare/update could end up busy looping
if `poll()` function was called before/during DTLS client handshake
(i. e. `poll()` called before an initial `send()`).
Fix this, by monitoring the handshake semaphore, already available in
the tls_context structure for DTLS client instead of underlying socket.
After the handshake is complete, switch to monitoring the underlying
socket instead.
For DTLS server this is not needed, since the handshake is initiated in
the `recv()` function, therefore any incoming data should trigger the
handshake.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
All IPSO objects that utilized the non-standard timestamp extension now
implement their model in version 1.1, which contains the Timestamp
resource. As it's no longer needed to add timestamp in a non-standard
way, simply remove LWM2M_IPSO_TIMESTAMP_EXTENSIONS option.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Update IPSO Pressure Sensor object implementation to support object
model version 1.1.
Add missing optional resources for the object model version 1.0.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Some of the objects redefined reusable resources IDs, while others used
a common header which defines resource IDs. Unify the approach and use
the header in every object.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Each object now have to specify the object version it implements.
Based on this information the LwM2M engine can decide whether it's
needed to report the object version during Registration/Discovery
operations or not.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If the first network interface is down when the net config init
is run, then the IP addresses etc would be set to wrong network
interface. So when initializing the network, try to first find
a network interface that is auto started and use that to configure
IP addresses etc.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The payload of the Register/Register Update message is also formatted as
application/link-format. Therefore it's reasonable to reuse the new
content writer instead of filling the payload manually.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit adds a new content writer, application/link-format, which
can be used during the Discovery procedure, to fill the content of the
response payload.
Introducing this new content writer, which encapsulates some of the
details like attribute handling which is different for bootstrap/regular
discovery, allows to unify the discovery handler in the lwm2m_engine,
thus it's no longer needed to have spearate handler functions for
bootstrap/regular discovery.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
`.well-known/core` resource is described by the CoAP RFC as an optional
method of resource discovery. The LwM2M specification though makes no
mentionon about this mechanism and provides an alternative method of
resource discovery instead (Device Management Discover, sec 5.4.2, and
Bootstrap Discovery, sec 5.2.7.3).
Since LwM2M does not require to implement `.well-known/core` resource
and it complicates the existing Discovery mechanism (and likely cause a
security concern) remove its handling from the LwM2M implementation.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Introduce LwM2M engine helper functions that allows to work with LwM2M
attributes outside of lwm2m_engine.c.
This is a groundwork for application/lwm2m-format content writer.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When recvfrom() was called with src_addr != NULL, then source address
was fetched from beginning of net_pkt. This works with native IP stack
obviously. However with offloaded IP stack there is no IP header, so
trying to parse missing IP header results in undefined behavior.
Check if network interface has offloaded IP stack. If positive, then
figure out if there is assigned remote address to network context on
which packet was received. Return this remote address, which SHOULD be
the source address of received packet. Otherwise, return an error.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Switch to the new API for delayed work related to DNS queries.
In the previous solution it was assumed that the work item could be
immediately cancelled at the point the query slot was released. This
is not true. We need a secondary condition to record the fact that
the query was completed while the work item was still pending, and an
additional check to detect when the work item completed and the slot
reclaimed.
Also annotate functions to indicate when they require the lock on
query content to be held, add some helpers that abstract core
operations like invoking a callback or releasing a query slot, and fix
some more cases where query slot content was accessed outside of the
new lock infrastructure.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
There was no close method implemented for AF_PACKET type
sockets. This meant that calling close() on packet socket
caused NULL pointer access.
This will allow #32949 issue to work properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
OpenThread UART tx callback has been processed even if it was not
triggered by OpenThread otPlatUartSend function.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Implement MSG_WAITALL flag for stream sockets. Setting this flag on
`recv()` call will make it wait until the requested amount of data is
received.
In case both, MSG_WAITALL all is set and SO_RCVTIMEO option configured
on a socket, follow the Linux behavior, i. e. when the requested amount
of data is not received until the timeout expires, return the data
received so far w/o an error.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add option to disable validation callback support by setting the
validation buffer size to 0, which allows to save some memory in case
it's not needed.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add a data validation callback to the resource structure, which can be
registered by an application. It allows to verify the data before
actually modifying the resource data.
If the callback is registered for a resource, the data is decoded into a
temporary buffer first, and only copied into the actual resource buffer
if the validation is successfull. If no validation is required (and thus
no callback registered) the resource value is decoded directly into the
resource buffer, as it used to be.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Verify the result of option encoding while forming Deregister message
instead of silently ignoring it.
Coverity ID: 215373
Fixes#33096
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
check_interface resets the counter semaphore, but
net_config_init_by_iface first calls check_interface, then inits
the semaphore.
Initialize the semaphore up front to allow the k_sem_reset call
to work properly.
Signed-off-by: James Harris <james.harris@intel.com>
Currently there is no way to distinguish between a caller
explicitly asking for a semaphore with a limit that
happens to be `UINT_MAX` and a semaphore that just
has a limit "as large as possible".
Add `K_SEM_MAX_LIMIT`, currently defined to `UINT_MAX`, and akin
to `K_FOREVER` versus just passing some very large wait time.
In addition, the `k_sem_*` APIs were type-confused, where
the internal data structure was `uint32_t`, but the APIs took
and returned `unsigned int`. This changes the underlying data
structure to also use `unsigned int`, as changing the APIs
would be a (potentially) breaking change.
These changes are backwards-compatible, but it is strongly suggested
to take a quick scan for `k_sem_init` and `K_SEM_DEFINE` calls with
`UINT_MAX` (or `UINT32_MAX`) and replace them with `K_SEM_MAX_LIMIT`
where appropriate.
Signed-off-by: James Harris <james.harris@intel.com>
Add NET_HEXDUMP_DBG/ERR/WARN/INFO macros, then use them for new
MQTT_HEXDUMP_TRC/ERR/WARN/INFO macros.
Log struct mqtt_utf8 using MQTT_HEXDUMP_TRC. One cannot safely log
mqtt_utf8 strings due to no guarantee of a NULL terminator being
present. Also, logging without log_strdup() as if it were a NULL
terminated string asserts when CONFIG_LOG_IMMEDIATE=n. This solves
both issues.
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
Uses of k_work_pending are to be replaced by k_work_is_pending which
conforms to current proposed naming guidelines.
Switch to the new function.
Also initialize the private work structure at build time, rather than
on each iteration (it is not permitted to invoke work API on an
uninitialized work item).
The implementation here is racy: that a work item is pending does not
mean changes since it was first submitted are guaranteed to be seen
when the work item begins (began) executing.
A better solution would be to have transmit_message be able to
determine whether there is unprocessed work. Then the work item can
be submitted unconditionally.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The compiler generates a warning regarding a variable being used
w/o being initialized in certian configuration. According to the logic
that's not the case, so just add some initial value to the variable to
silence the compiler.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As network interface array size might be larger than the actual
network interface count, check this condition and ignore those
interfaces that are not in use.
We cannot know for certain how many network interfaces there
are at built time, as the total count is only available at runtime.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The network interface index is very useful info to see in
debug prints so add those to debug output.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In case the endpoint string provided by the application is longer or
equal to CLIENT_EP_LEN - 1, the strncpy() function will not add the NULL
terminator. As the endpoint buffer is treated as a C-string in other
places in the code, make sure it's NULL terminated by adding NULL
explicitly at the end of the buffer.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Make sure query string used by the lwm2m_rd_client is large enough to
encode any query string that can be sent during bootstrap/registration.
As the maximum query string length is related to the endpoint name,
which is limited by `CONFIG_LWM2M_RD_CLIENT_ENDPOINT_NAME_MAX_LENGTH`,
make the query string corellated to the value of this config.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Avoid splitting lines when possible while keeping length below 100
chars. Some other minor style corrections.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
The use of a single error variable for RX and TX operations has
shown the OpenThread code to be asserting in some conditions.
This commit splits tx_rx_result into rx_result and tx_result
to avoid such cases.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Added 3 utility functions :
- lwm2m_engine_update_period_service() which updates the period of a
given service.
- lwm2m_engine_update_period_min_observer() which updates the
min_period_sec for a given observe node.
- lwm2m_engine_update_period_max_observer() which updates the
max_period_sec for a given observe node.
Signed-off-by: Thomas LE ROUX <thomas.leroux@smile.fr>
* Added implementations of otPlatCAlloc and otPlatFree methods
necessary for the OpenThread in case of using EXTERNAL_HEAP.
* Added CONFIG_OPENTHREAD_DNSSD_SERVER option to allow enabling
OT_DNSS_SERVER feature.
Signed-off-by: Kamil Kasperczyk <kamil.kasperczyk@nordicsemi.no>
This patch adds implementation of socket option used to get
protocol used for given socket (e.g. IPPROTO_TCP). This option
is not defined in POSIX, but it is Linux extension.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
This patch adds implementation of socket option used to get
type of given socket (e.g. SOCK_STREAM).
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
Remove `OPENTHREAD_CONFIG_NCP_BUFFER_SIZE` define since it does not
exist in OpenThread.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
If userspace is enabled, then the TLS context needs to be
made a NET_SOCKET kernel object. Without this the userspace
cannot access TLS sockets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When handling CoAP Confirmable requests, there is a common
Acknowledgement initialization procedure that repeats for each
response packet initialization. This patch adds a function that
simplifies Acknowledgement initialization procedure encapsulating
repeating code.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
This patch replaces magic numbers with COAP_TOKEN_MAX_LEN value and
removes unnecessary castings of token buffer type.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
RFC 7252 (CoAP) specifies value of the Version (Ver) field in the
protocol header to value 1. This patch defines value of the Version
field to make packet initialization easier. All samples and tests
are updated to use the new COAP_VERSION_1 field when initializing
a CoAP packet.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
CoAP RFC (RFC7252) states that end points should support
the CoRE Link Format of discoverable resources as described in RFC6690
(refer section 7.2 of the RFC7252).
Fixes#31609
Signed-off-by: Kasun Hewage <kasun.ch@gmail.com>
Only start the network logging backend if the autostarting
option CONFIG_LOG_BACKEND_NET_AUTOSTART is enabled.
Also, call init to make sure that the backend is initialized
properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Token and payload are appended from data buffers to a CoAP packet
being encoded. Keyword const was missing for parameters in functions
appending these parts to a packet.
Now token and paylod can be copied to CoAP packet from constant
buffers, that can be stored in ROM.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
This patch introduces COAP_TOKEN_MAX_LEN definition in coap.h file.
This definition replaces magic number across CoAP protocol
implementation and CoAP samples.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
CoAP protocol defines registry of Content-Format option values.
This patch adds this enumeration to coap header file to make it
available to all applications using CoAP protocol. It modifies
code using CoAP service to use new enumeration.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
Add Kconfig option to randomize the initial ACK timeout, as specified in
RFC 7252. The option is enabled by default.
Additionally, finetune the default value of COAP_INIT_ACK_TIMEOUT_MS
option, to match the default ACK_TIMEOUT value specified by the RFC
7252. The RFC does not specify the minimum/maximum value of the
ACK_TIMEOUT parameter, but only suggests it should be no lower than 1
second, so adjust the option range to reflect this.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Introduce retransmission counter to the coap_pending structure. This
allows to simplify the retransmission logic and allows to keep track of
the number of remaining retranmissions.
Additionally, extend the `coap_pending_init()` function with `retries`
parameter, which allows to set the retransmission count individually for
each confirmable transaction.
Fixes#28117
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Multi-instance resources shall report its dimension (number of
resource instances) on discovery. Since it was not possible to tell
simply on the instance count whether the resource is multi-instance or
not (there could be a multi-instance resource with only one instance
avaialble) add a new parameter to the structure representing resource,
indicating whether it's multi-instance or not.
Add dimension information to the discovery result.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Remove any references of Bootstrap Discovery from Device Management
Discovery procedure and fix some of it's logic following the
specification.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Bootstrap discovery was not implemented properly in the LwM2M engine.
Although, there were some indications in the source code that it is
implemented, it was not done according to spec (and actually broken).
Given that Bootstrap Discovery procedure differs a lot from the regular
Device Management Discovery (different permissions, different
information returned), it's easier to implement it as a separate
function (`bootstrap_discovery()`) instead of making the existing
`do_discovery_op()` function even more complicated.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit improves portability somewhat on machines where sizeof
(int) is less than sizeof (void *). Note that the implementation is
still not portable and will fail when you start using addresses which
can not be represented by "int cast to unsigned int".
On RISC-V 64-bit with RAM on 0x80000000 we previously got hit by
E: Exception cause Load access fault (5)
ld s0,16(a0)
a0: 0xffffffff80025610
(The int should probably be changed to intptr_t if possible.)
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
`delta_size` was incorrectly used to assess whether extended option
length field shall be used. In result, options larger than 268 bytes
were not encoded properly.
Fixes#31206
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The LwM2M firmware pull object no longer uses the system workqueue
to execute firmware_transfer(), but directly executes it itself.
Previously, the workqueue would be blocked because firmware_transfer()
indirectly calls a blocking connect(). This would lead to problems
with e.g. modem drivers that use UART to interface with the modem
hardware, as some UART drivers use the workqueue.
Fixes#31053.
Signed-off-by: Maik Vermeulen <maik.vermeulen@innotractor.com>
It is documented that using transient information like whether a work
item is pending or a delayed work item has time left to determine the
state of the work item before subsequent reconfiguration is prone to
race conditions, and known to produce unexpected behavior in the
presence of preemptive threads, SMP, or use of the work item from
interrupts. As a best practice such pre-validation steps should be
avoided unless algorithmically necessary.
All comparisons of remaining delayed time before canceling a delayed
work item in this module appear to be optimizations subject to the
above race conditions. Remove the checks so that only the inherent
race conditions in the implementation of canceling a work item remain.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
With this patch the resolver module can resolve literal IPv6
and IPv4 addresses even when DNS client is not presnet in
the system.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
During recent upmerge OPENTHREAD_CONFIG_PLAT_LOG_FUNCTION__COUNT_ARGS
macro was renamed to OPENTHREAD_CONFIG_PLAT_LOG_MACRO_NAME__COUNT_ARGS
but the code wasn't updated where the macro is actually used.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If getaddrinfo() was called with AI_PASSIVE flag in hints,
returned address defaulted to SOCK_STREAM and IPPROTO_TCP.
Fixed so that SOCK_DGRAM leads to correct address type
that can be fed to bind() directly.
Same hard coding was visible when numerical IPv4 address string
was converted to binary. That is also fixed to respect hints now.
Also, added functionality to get IPv6 address, when hints contained
AF_INET6.
Fixes#30686
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
A dedicated LwM2M execute callback type has been implemented which
supports execute arguments. The lwm2m engine, lwm2m_client sample and
lwm2m objects have been updated accordingly. Also the API change has
been documented, and the lwm2m engine reference has been updated.
Fixes#30551.
Signed-off-by: Maik Vermeulen <maik.vermeulen@innotractor.com>
Add option to enable software CSMA backoff in the OpenThread MAC layer.
This allows to run CSMA procedure correctly in radios that do not
support hardware CSMA backoff, and use them as RCP, where this feature
is required.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit adds a missing otPlatSettingsDeinit function
to the Zephyr OpenThread platform implementation.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Previously, lwm2m_engine set would check against the max_data_len
parameter of the ressource, but didn't take into consideration the
(possibly changed) max_data_len returned by the pre_write callback.
Fixes#30541
Signed-off-by: Henning Fleddermann <henning.fleddermann@grandcentrix.net>
In mqtt_keepalive_time_left(), return -1 if keep alive messages are
disabled by setting CONFIG_MQTT_KEEPALIVE=0.
This allows to use mqtt_keepalive_time_left() directly as an input
for poll(). If no keep-alive is expected, -1 would indicate
that poll() can block until new data is available on the socket.
Signed-off-by: Simen S. Røstad <simen.rostad@nordicsemi.no>
The message should only be returned if the requested pending/reply
pointer is not NULL. Otherwise it could get an incorrect match (for
instance if specific pending pointer is searched for and reply is NULL
the function could return any message that doesn't expect a reply (and
thus has its reply pointer set to NULL).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
LwM2M engine by default sends piggybacked responses for requests after
all callbacks are executed. This approach however isn't good enough if
the application callback executes some lenghty operations (for instance
during FW update). Delaying the ACK may result in unnecessary
retransmissions.
This commits adds an API function which allows to send an early empty
ACK from the application callback. This prevents further retransmissions
from the server side. After all callbacks are executed, the LwM2M engine
will send the response as a separate CON message.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Verify if block tranfer is used and not an initial block when skipping
directly to data processing during FW update in PUSH mode.
This fixes a bug, which caused TLV not to be processed when the FW
object was updated as a whole, and actual resource number was encoded in
a TLV (for instance when writing FW Update URI).
Fixes#30135
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Rework the bootstrap DELETE operation, to support deletion of multiple
resources.
Current implementation had several oversimplifications, making it not
spec-compliant:
* DELETE `/` removed only Security object instances (!= 0)
* DELETE `/x` was handled as DELETE `/x/0`, therefore not removing all
of the object instances.
Since the above is only supported during bootstrap and not regular
Device management, this functionality was implemented in the
`bootstrap_delete` function, which now will be called for all DELETE
operations initiated during bootstrap. The regular LwM2M DELETE handler
will only be called during regular Device management, as it has more
strict limitations on what can be deleted.
Additionally, handle empty URI Path option as `/`, therefore indicating
deletion of all resources.
Fixes#29964
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If networking pre-emptive thread priorities are enabled,
then use the proper macro to enable them.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Because unoconnected stream socket doesn't have any chance to receive
any data, so a blocking recv() would hang forever on it (and does
without this change).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
* Add RCP library.
* Conditionally remove non required libraries not required for RCP.
* Drop :option: marker for CONFIG_OPENTHREAD_NCP_SPINEL_ON_UART_ACM
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
This change enables support for DNS service discovery
(RFC 6763) in the mdns_responder service and sample app.
Fixes#29429
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
This change adds support for DNS Service Discovery (DNS-SD)
as described in RFC 6763.
Fixes#29099
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Add a simple backoff mechanism between consecutive registration attempts
in case of registration failures. Finally, notify the application in
case the registration failed several times.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Refactor the boostrap regstration procedure, by splitting the message
creation and sending into a separate function, in similar manner as
it's done with regular registration.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Currently, when socket errors occur during receive, the LwM2M engine
restarts the state machine and registers again to the server. While this
works in simple use case (only RD client socket open), it's not a valid
approach when more sockets are open (FW update socket).
Fix this by introducing socket fault callback, which is registered by
the LwM2M engine users. This way, a proper socket owner is notified on
error and can pertake appropriate action.
For RD socket errors the behaviour remains the same - the state machine
is reset and the client registers again to the server. For FW update
socket, handle the error by reopening the socket and retransmitting the
last request. This allows to resume the download from the point the
error occured, w/o a need to start from scratch.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Call mbedtls_ssl_conf_max_frag_len() on created TLS context
configuration, so that Maximum Fragment Length (MFL) will be sent to
peer using RFC 6066 max_fragment_length extension. MFL value is
automatically chosen based on MBEDTLS_SSL_OUT_CONTENT_LEN and
MBEDTLS_SSL_IN_CONTENT_LEN mbed TLS macros.
This extension is mostly useful for TLS client side to tell TLS server
what is the maximum supported receive record length.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
If there are enough tls_context objects in the system (configured by
CONFIG_NET_SOCKETS_TLS_MAX_CONTEXTS), but there are not enough file
descriptors (configured by CONFIG_POSIX_MAX_FDS) to create underneath
TCP/UDP socket, then TLS socket creation fails with leaked tls_context.
Call tls_release() in ztls_socket() error path whenever underneath
TCP/UDP socket creation fails.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
According to LwM2M specfication v1.0.2, par. 5.3.2, the LwM2M client
MUST send an “Update” operation to the LwM2M Server whenever the
lifetime parameter of the Server object changes the server). The same
applies for the object instances created/deleted. The changes in objects
seem to already be handled, but the lifetime was not.
Additionally, the "Update" message shall only contain these parameters
which changed since the last update (including objects). As it's
straightforward to determine if the liftime changed but it's not easy
to tell if there were updates in the object instances, add an
additional parameter to the engine_trigger_update() function, indicating
that new object information shall be sent in the "Update" message.
Eventually add a proper error checking in `sm_send_registration` as the
function is reworked anyway.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The memset on firmware_ctx during PULL FW update initialization will
set the socket descriptor to a valid value of 0. This leads to an error
if parsing of the URI provided by the server fails, and the firware_ctx
is closed - the socket with a descriptor 0 will be accidently closed.
Fix this by invalidating the socket FD after the memset on
initialization.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
It shouldn't be optional to handle separate response, as it's a
mandatory requirement according to the RFC7252:
"The protocol leaves the decision whether to
piggyback a response or not (i.e., send a separate response) to
the server. The client MUST be prepared to receive either."
Therefore, remove the flag as separate responses are handled now
properly.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Separate response handling implemented in the engine was faulty. The
separate response was not acknowledged by the client, resulting in
spurious retransmissions from the server side.
Also, the pending CON message was retransmitted by the client even after
it was acknowledged by an empty ACK, but the respnse haven't arrived
yet. Fix this by adding a new `acknowledged` flag to the `lwm2m_message`
structure. Once acknowledged, the flag is set and the confirmable
message is no longer retransmitted. We keep the message on the pending
list in order to timeout properly in case separate response does not
arrive in time.
Finally, prevent the reply callback from being called twice in case
the response is transmitted separately from ACk. The callback should
only be called on the actual reply, not the empty ACK.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
So far this function existed as a static function in LwM2M PULL FOTA
module. Since such functionality will be needed in other places, make it
an internal API function.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Some LWM2M backends/servers, such as emxq, expect the sequence numbers
to begin on 0.
This change is in line with how other lwm2m clients, such as Anjay and
Wakama, starts the notification sequence.
Signed-off-by: Viktor Sjölind <viktor.sjolind@endian.se>
Prior to this commit, the LwM2M stack would TLV-encode integers
depending on their internal storage size. An integer with value 5 stored
in an int8_t would be encoded with length 1, but an integer stored in an
int32_t would be encoded as "00 00 00 05" with length 4.
This commit checks if the value is castable to a smaller int and encodes
it as such if so. This is cascading, so even a 64 bit integer with value
5 will be encoded with length 1.
Note that this does not seem to be required by the specification, but
this is how Anjay and the other LwM2M stack seem to do it.
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
Currently, there is a case for net_config_init function that for
timeout==0 and when iface is already up, the ip setup is not proceed
and the error message "Timeout while waiting network..." is logged.
This commit fixes it.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Adds the socket option TLS_ALPN_LIST for SOL_TLS sockets
Passes the configured alpn list to the mbedtls config
on mbedtls init
Signed-off-by: Emil Hammarstrom <emil.hammarstrom@assaabloy.com>
These defines are leftover of old platform settings implementation
and are not used any more.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
The name of the connection manager thread (conn_mgr_thread) was
unnecessarily long in "kernel stacks" command. So make the name
to "conn_mgr" which fits nicely to the output of that command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Another team reported that current default values for number of allowed
IP addresses per child (4) and and max number of children (10) are too
small for some customers.
Increased the values allowed configuring child count.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
OpenThread mac counters require rx failed notification to work properly.
Made use of previously implemented notification.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
A normal websocket close sequence:
close(websock) ->
websocket_close_vmeth() ->
websocket_disconnect()
close(ctx->sock) called in the function websocket_disconnect()
and cause websocket_close_vmeth() called again.
Finally stack overflow by loop close call.
It's maybe a side-effect by PR #27485
Signed-off-by: Jackie Ja <qazq.jackie@gmail.com>
Improve token handling by removing special meaning of tokenlen == 0,
which allows to handle server requests w/o a token (so far such
requests would cause the lwm2m engine to autogenerate token in the
response).
In order to autogenerate token during message initialization, use
special symbol `LWM2M_MSG_TOKEN_GENERATE_NEW`. If no token is wished to
be used, simply set the tokenlen to 0.
Additionally, fix an issue with token autogeneration, where invalid
token len was used (0 instead of 8).
Fixes#28299
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
LwM2M engine did not set response code for the Bootstrap-finish message,
hence it replied with the code copied from the request which is not
correct. Fix this by setting correct code for the Bootstrap-finish
reply.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
So far, `LWM2M_RD_CLIENT_EVENT_BOOTSTRAP_TRANSFER_COMPLETE` event was
reported before the final ACK for the Bootstrap Finish was sent from the
client side. This could cause delays in the ACK sending, in case the
application wanted for instance to store the received data in flash.
Fix this, by reporting the
`LWM2M_RD_CLIENT_EVENT_BOOTSTRAP_TRANSFER_COMPLETE` event on the next
state tansition (before the actual registration starts).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
"Public Key or Identity" resource is of opaque data type, therefore it's
not correct to assume it will be a NULL terminated string (the existing
servers, for instance Leshan, does not include NULL terminator). Use the
actual size associated with the resource instead.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
So far, the resource instance structure kept only the information about
the buffer length provided to the resource (in the `data_len` field).
While this approach might be enough for integer resources, where the
actual data size is fixed, it did not work for opaque resources. It is
impossible to determine the actual opaque resource length after it's
been written into.
Fix this, by replacing the current `data_len` field of the
`lwm2m_engine_res_inst` with `max_data_len`, indicating the buffer
size, and making the `data_len` field to hold the actual data size of
the resource.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Currently, after `CONFIG_LWM2M_RD_CLIENT_SUPPORT_BOOTSTRAP` is enabled,
the LwM2M engine will initiate bootstrap procedure on each run. This
approach limits the flexibility of the application, as it's not always
necessary to go over the bootstrap procedure (for instance, the
application may decide to store the security object obtained during the
bootstrap in flash, and restore it on boot).
Fix this by introducing an additional `flags` parameter to the
`lwm2m_rd_client_start()` function, which provides information whether
to run bootstrap in the current session or not.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
So far, the LwM2M state machine started in the `ENGINE_INIT` state,
which made it exectue the registration/bootstrap registration even when
`lwm2m_rd_client_start()` was not called. With a new `ENGINE_IDLE`
state, the state machine can wait for the application to actually start
the client before proceeding. It also makes sense to stay in the
ENGINE_IDLE state after successfull deregistration, until the
application restarts the client.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit fixes PUSH FOTA when opaque content-format is used.
This consists of the following fixes:
* Moved `struct block_context` to a private header, so that it can be a
part of `struct lwm2m_input_context`. This allows content decoders to
make use of the block context data.
* Removed faulty `get_length_left` function from the plain text
decoder, and replace it with coap_packet_get_payload() to obtain the
actual payload size.
* Introduce `struct lwm2m_opaque_context` as a part of block context,
which allows to keep track of opaque data download progress.
* Simplify `lwm2m_write_handler_opaque()` function. It will now only
make calls to `engine_get_opaque` - it's the decoder responsibility
to update the opaque context according to it's content format (for
instance TLV decoder should only update it with the actual opaque
data size, not the whole TLV).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Replace all calls to the assert macro that comes from libc by calls to
__ASSERT_NO_MSG(). This is usefull as the former might be different
depending on the libc used and the later can be customized to reduce
flash footprint.
Signed-off-by: Xavier Chapron <xavier.chapron@stimio.fr>
Using zephyr's internals zsock_ calls make mqtt library more compatible,
now it does not depend on NET_SOCKETS_POSIX_NAMES.
Signed-off-by: Jan Pohanka <xhpohanka@gmail.com>
This commit adds additional Kconfigs that allow for changing
configuration values for the Zephyr port in OpenThread.
Those values are:
- number of the internal OT message buffers
- number of the state change callbacks
- number of the EID-to-RLOC cache entries
- size of the NCP buffer
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
MQTT client state is protected using mutex. That mutex however is
temporarily unlocked when calling event callbacks. This means that in
client_disconnect() transport can already be disconnected, but without
marking it as such in client->internal.state.
When mutex is unlocked in event_notify() function, then there are two
possible paths of failure:
1) First possibility is when RX and TX are called from two separate
threads, so that the other thread gets resumed and functions like
verify_tx_state() (e.g. in mqtt_publish()) allow to continue
communication over disconnected medium.
2) Another possibility is that user calls mqtt_abort() or
mqtt_disconnect() in event handler.
In both cases MQTT library tries to send or receive data, possibly
followed by second close() of underlying file descriptor.
Prevent using disconnected transport by clearing MQTT client state right
after calling mqtt_transport_disconnect(), without releasing mutex, even
for a while.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Since commit b3a1ede830 OpenThread uses the Zepyhr settings submodule
instead of writing to the flash directly. The flash.c file is not
compiled anymore, so let's just remove it. Also remove the
OT_PLAT_FLASH_PAGES_COUNT Kconfig option which was solely used by that
file.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
support longer name like urn:dev:ops:{OUI}-{ProductClass}-{SerialNumber}
or urn:imei-msisdn:###############-###############
Signed-off-by: Pascal Brogle <pascal.brogle@husqvarnagroup.com>
If there is no space in the sending window, then return -EAGAIN
so that the caller may try later.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we run out of network buffers and cannot send data, and if
we have a blocking socket, then wait until new buffers are
available before returning. As this might lead to deadlock,
wait only max 10 seconds and return ENOMEM if we cannot get
buffers in a reasonable amount of time.
Fixes#28216
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Change so that the caller of lwm2m_init_message is
responsible for generating a message id and remove message id generation
from lwm2m_init_message. Prevents generating a new id when the caller's
intent is to init a message with id 0.
Fixes#28283
Signed-off-by: Pascal Brogle <pascal.brogle@husqvarnagroup.com>
message id 0 and token 0 have special semantics in the lwm2m engine,
they are used to request generation of new id, mark them as such.
Signed-off-by: Pascal Brogle <pascal.brogle@husqvarnagroup.com>
The timeout variable in `dtls_rx()` was initialized improperly.
Coverity ID: 214219
Fixes#28161
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The default string representing Sensor Type resource in Generic IPSO
object would not fit into the predefined buffer. Increase the buffer
size and add extra BUILD_ASSERT to detect this situation.
Coverity ID: 214225
Fixes#28164
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The timeout log error message condition in wrong. When the timout
happens the "count == -1" and the condition is invalid.
This commit fixes it.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Fix for a problem in current lwm2m firmware object implementation.
Transfer should not begin when an empty string is received.
Signed-off-by: Marin Jurjevic <marin.jurjevic@hotmail.com>
This new option allows to include `sockets_tls.c` into the build when
socket offloading is enabled.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Given that the offloaded poll handling differs from the poll handling of
native sockets (entire poll function call is offloaded), some
adjustements were needed to make TLS socket work with offloaded poll
calls.
To achieve this, in case socket offloading is used, instead of jumping
directly to the offloaded poll call, a TLS wrapper for the offloaded
poll will be called. This wrapper will do additional checks at the
mbedtls level, to verify that the event is only notified to the caller
when the application data is available (i. e. not to report events
during handshake or when partial data is received, not ready to
decrypt).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Separate TLS sockets implementation from net_context layer. Instead of
calling net_context functions directly, create an underlying TCP/UDP
socket, and call socket functions on it instead. This results in a
simpler design, where we don't need to duplicate specific parts of code
from the native socket implementation. Additionally, this allows to use
a different TCP/UDP stack underneath (i. e. when sockets offloading is
used).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit adds helper function to verify protocol, which was done in
two different places in the code. The function returns the underlying
protocol information on success.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Entropy device, as being unique here, does not need to be passed through
mbedtls and can instead set static locally.
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Following are the changes to variable names that are matching
with tag names (Rule 5.7 violations)
In kernel.h, event_type is matching with a tag name in
lib/os/onoff.c. Added a _ prefix to event_type and
also to the macro argument names.
In userspace.c, *dyn_obj is matching with the tag name
dyn_obj in the file itslef. Changed it to dyn
In device.h, device_mmio.h, init.h and init.c,
changed the *device to dev. Except for one change in
init.h
Signed-off-by: Spoorthy Priya Yerabolu <spoorthy.priya.yerabolu@intel.com>
Add more tests to verify that we discard malformed packets.
In order to simplify the testing, separate message validation to
dns_validate_msg() function in resolve.c. Allow that function to
be called from unit test. This way we can construct invalid DNS
messages in unit test and verify that they are discarded when
needed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The ANCOUNT has nothing to do with label count so remove the
original while loop and just go through all the labels until
we have read all of them.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is not possible with valid DNS messages but is possible if
we receive malformed DNS packet.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow user to create SOCK_DGRAM type AF_PACKET socket. This
allows user to send raw IP packets without specifying
L2 (like Ethernet) headers.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In 'struct coap_resource' path description:
- the plus symbol represents a single-level wild card in the path;
- the hash symbol represents the multi-level wild card in the path.
This change keeps compatibility with RFC 7252 but allows handling
multiple requests in single function.
Signed-off-by: Eug Krashtan <eug.krashtan@gmail.com>
-Wimplicit-fallthrough=2 requires a fallthrough comment or a compiler
to tells gcc that this happens intentionally.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Given the comment in `ipv6_event_handler`, the init function shall wait
for the last added IPv6 address to be confirmed with DAD. This is
contrary with current logic, which will only wait for the first address
to be confirmed.
This commit adds a break statement in the loop, not to overwrite the
recent address to verify with an older one.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When verifying the parameters check NULL value separately.
This will avoid nasty warning message to be printed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add function pointer to vtable and use that directly instead of
routing via ioctl() call. This is done as we are trying to get
rid of ioctl() calls in the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Do not route close() calls via ioctl() as that is error prone
and quite pointless. Instead create a callback for close() in
fdtable and use it directly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit allows let build zperf sample with overlay-netusb.conf.
USB subsystem must be enabled by the application.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Instead of just showing network interface pointer, print also
network interface index. This helps debugging.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
OT_RADIO_CAPS_SLEEP_TO_TX was added as a radio capability
for ieee802154 radio. Waiting on RX state before transmission
is alternative condition to OT_RADIO_CAPS_SLEEP_TO_TX support
as it was a result of OpenThread architecture and is actually
not needed in the Zephyr. Such change lets to start transmission
faster and lower SED device power consumption in active state
about 30%.
Signed-off-by: Kamil Kasperczyk <kamil.kasperczyk@nordicsemi.no>
Zephyr platform does not support MAC retransmissions on its own,
so OT_RADIO_CAPS_TRANSMIT_RETRIES capability was removed.
It should not be enabled basing on IEEE802154_HW_CSMA support,
as these are quite seperate features. Current implementation
assumes that platform performs retransmissions on its own,
what is not provided and leads to lack of MAC retransmissions.
Signed-off-by: Kamil Kasperczyk <kamil.kasperczyk@nordicsemi.no>
CONFIG_NET_CONFIG_INIT_TIMEOUT should not only be available if
CONFIG_NET_CONFIG_AUTO_INIT=y. If *_AUTO_INIT=n then application
may wish to initialize net manually and still use configured
timeout.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
If the CONFIG_NET_CONFIG_AUTO_INIT is not set, then let application
to do the initialization manually. In that case the app should call
net_config_init_app() when it is ready to setup the network.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The LwM2M server might modify the lifetime value while the device is
registered, hence it's needed to obtain the value directly from the
Server object instance, before each Register Update.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
A proper way to match a Security object instance with a Server object
instance is via Short Server ID resource. Both coupled object instances
should carry the same value of this resource in order to me considered
matched.
This was not implemented in the LwM2M library and it was incorrectly
assumed that the Security object instance index corresponds to the
Server object instance index. While such apporach works is simple
scenario, it might yield incorrect results when bootstrap is used.
Fix this, by verifyng the Short Server ID resource in the Secuirty
instance used, and finding a matching Server instance. The server object
instance is stored for future use in the engine.
Additionally, remove an extra Server object instance that was created
when the bootstrap procedure was used. Since the boostrap Security
object instance does not have the corresponding Server object, it's
enough to have a single Server instance.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This set of functions seem to be there just because of historical
reasons, stemming from Kbuild. They are non-obvious and prone to errors,
so remove them in favor of the `_ifdef()` ones with an explicit
`CONFIG_` condition.
Script used:
git grep -l _if_kconfig | xargs sed -E -i
"s/_if_kconfig\(\s*(\w*)/_ifdef(CONFIG_\U\1\E \1/g"
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Currently, OpenThread builds produce warning from the OT logger module,
because we don't use one of the parameters provided by logger macro.
Explicitly mark the parameter as unused to prevent warnings being
thrown.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Currently, the application could receive a duplicate CONNACK event, in
case the server rejected the connection at MQTT level (with an error
code provided with CONNACK message). A subsequent connection close (with
`mqtt_abort` for instance) would produce the duplicate event.
Fix this by reporting back to the MQTT engine, that the connection was
refused, so it can close the connection rightaway. Rework the event
notification logic, so that DISCONNECT event instead of a duplicate
CONNACK event is notified in that case.
Also, prevent the MQTT engine from notyfing DISCONNECT event in case of
socket errors during initial connection phase (i. e. before
`mqtt_connect` function finished).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Putting data to local buffer before transmission was removed
to optimize operation. Local buffering was not needed, as passed
buffer cannot be modified until sending is finished.
Signed-off-by: Kamil Kasperczyk <kamil.kasperczyk@nordicsemi.no>
Currently, functions for poll sock_fds array management are buggy, in
case there is another socket open (for instance the socket for firmware
update download), it could get overwritten, if the LwM2M socket was
closed and re-opened in a meantime (e. g. on registration timeout).
Fix this, by appending new entries to the sock_fds in continuous manner.
In case of removal, the deleted entry is overwritten by the last one,
and the last one is cleared.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
During FW update, the application expects a consecutive data stream.
Therefore retransmitted blocks shall not be forwarded to the
application, but ignored. In case blocks are received out of order,
return an error and do not handle this block.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When FW update in PUSH mode is used, the firmware is encapsulated in the
TLV as an opaque data, according to the LMWM2M satandard, and then
sliced into blocks and transferred block by block in several
transactions. Therefore, the TLV header is only present in the initial
message.
Current implementation did not handle this case well, reporting errors
on consecutive blocks, therefore making the FW update in PUSH mode
broken.
This commit fixes this issue with following changes:
* The TLV is only assumed to be present in the initial block, while
consecutive blocks will be processed directly into the appropriate
handler,
* 32-bit variables shall be used whenever dealing with the opaque data
length, since the firmware size can easily exceed the 16-bit range,
* Additional information, required for the FW block transfer to work
properly were added to the block context structure,
* The application shall only be notified of the actual data length, and
not the total block size (the total TLV size including header).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When the dupplicate address detection mechanism is not used, we should
not wait for IPv6 address configuration. Because of the bug we are
waiting for it, when CONFIG_NET_CONFIG_MY_IVP6_ADDR is not set.
This commit fixes it.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Remove the `sm_bootstrap_reg_done` function, which produced duplicated
logs. The bootstrap registration done event is already logged on state
transition. Additionally, in case bootstrap procedure took longer time,
the duplicated log message was printed on each `lwm2m_rd_client_service`
call (500 miliseconds by default).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The security object instance used should be cleared on engine reset,
otherwise we might end up using invalid object instance for the
registration (i. e. if the engine was restarted during the bootstrap
procedure due to socket errors, the registration attempt will use
bootstrap security object instead of finding a proper one).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
During the bootstrap procedure, when Boostrap Finish was received, the
response message was not initialized properly, resulting in a socket
error (NULL pointer porovided) and the response not being sent.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Fix compilation error when the DIAG module is enabled.
All core functionalities are provided.
Signed-off-by: Piotr Szkotak <piotr.szkotak@nordicsemi.no>
`addrlen` parameter is updated on each `recvfrom` call, indicating the
actual address length returned. In case both, IPv4 and IPv6 are used on
different sockets (i. e. on regular LWM2M socket and FOTA socket), the
returned address length will differ.
In case `from_addr_len` is not reinitialized on each iteration, the
value stored in the `from_addr_len` variable will eventually indicate
the smaller IPv4 address size, therefore resulting in a failure in a
consecutive call on an IPv6 socket.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Although LwM2M engine uses cooperative threads, the internal `send()`
implementation might trigger context switch when it calls a kernel
function, therefore resulting in `send()` call being entered from both
the LwM2M thread and the retransmit work.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Unit tests were failing to build because random header was included by
kernel_includes.h. The problem is that rand32.h includes a generated
file that is either not generated or not included when building unit
tests. Also, it is better to limit the scope of this file to where it is
used.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The context should only clear messages it owns, not all of them. Since
both context (LwM2M and FOTA) share common message pool, they might
interrupt their operation otherwise (i. e. cancel retransmissions).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The FOTA socket was not closed when download finished or an error
occured.
Additionally, fix the socket fd verification (it was assumed 0 is not a
valid fd which is not correct).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case unsopported TLV type or malformed packet is received, the
`do_write_op_tlv` function will end up in an infinite loop. Prevent that
by returning an error code in case it does not recognize TLV type.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Allow to configure, how long before registration timeout should the
Registration Update be sent. The fixed 6 seconds used so far, might
not be enough in slower networks (like NB-IoT), resulting in frequent
re-registrations at LWM2M level.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
OpenThread API is not thread-safe.
Moved creation of otMessage to the Thread task and created api
for passing it properly.
This way it should be less possible for an issue to occure eg.
during message buffer allocation.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
Added automatic strdup for RAM %s parameters. Postponed format
processing to idle time. Automatic parameters counting during
compilation. Very fast execution for up to three parameters.
Signed-off-by: Tomasz Konieczny <tomasz.konieczny@nordicsemi.no>
This is no longer required since drivers implementing the sockets
offload interface were migrated to use pure zsock_ instead of
raw POSIX types and functions.
Signed-off-by: Adam Porter <porter.adam@gmail.com>
With timeout==0 count is set to 0 as well and then it is decremented to
-1. It is later checked == 0 and continues to decrement and loop.
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
Under Linux when you shutdown a socket which is blocked on
an accept call the error code returned by accept is EINVAL.
Modify the socket code to be inline with this behaviour.
Signed-off-by: Léonard Bise <leonard.bise@gmail.com>
When closing a listening socket the functions waiting on the
FIFO will be unblocked this will result in receiving a NULL child
context. If that is the case return an error instead of carrying on.
Return the same error code (EINVAL) that is returned on Linux when
calling shutdown on a blocked accept call.
Signed-off-by: Léonard Bise <leonard.bise@gmail.com>
In case CoAP packet does not carry payload, and the last option is
zero-length, the option structure was not filled with data (opt number
and length). Fix the length check to prevent this from happening.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This should be boolean according to specification. It makes difference
when JSON encoding is used.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
So far net config initialization code relied on number of services
needed by application. This was fine as long as all enabled
services (e.g. CONFIG_NET_IPV4=y, CONFIG_NET_IPV6=y) were selected by
project configuration as "needed" (e.g. CONFIG_NET_CONFIG_NEED_IPV4=y,
CONFIG_NET_CONFIG_NEED_IPV6=y). Problem appeared for example when both
IPv4 and IPv6 were enabled (CONFIG_NET_IPV4=y, CONFIG_NET_IPV6=y), but
only IPv6 was marked as "needed" (CONFIG_NET_CONFIG_NEED_IPV6=y). In
such situation number of required services was equal to 1. When IPv4
setup was completed, this resulted in returning from net_config_init()
function. Application code failed, because IPv6 was still not
functional.
Do not rely on number of services anymore, as it is error prone. Use
flags instead to mark which services are ready. Compare those flags with
the flags passed to net_config_init() (selected in project configuration
in most cases) to decide whether network configuration has completed
already or not.
Also introduce services_notify_ready() and services_are_ready() helper
functions to isolate implementation details from the logic.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
With current design there is single semaphore (called 'waiter') for
wakeing up initialization thread. This thread should then check for
number of protocols that still need to be initialized. This happens now
only when waiting on 'waiter' semaphore times out.
Do not check for k_sem_take(&waiter) return value, as all needed
information about protocols being initialized already is in 'counter'
semaphore.
Fixes: #25358
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
It might happen that while we are waiting for the response
to one of our query, we receive a query to resolve another name.
Previously this would make the current name resolution to fail because
only responses were expected to be received.
Signed-off-by: Léonard Bise <leonard.bise@gmail.com>
Any CoAP implementation when use at least block transfer or is a server
side need access some CoAP options as integer values. This add a method
at public interface and defines for block wise operations to avoid code
useless code duplication.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The SET_ERRNO() macro does nothing if a positive value is provided
to it, and the functions were not returning -1 or setting errno
as expected.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
APIs were returning -1 without setting errno if the file
descriptor looked up a null object or there was no function
installed in the vtable. Set to EBADF for this case.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Cleansession is hardcoded to 1 but some use case might require 0
to make the sessions persistent (ie get messages sent while the
client was offline)
Signed-off-by: Xavier Naveira <xnaveira@gmail.com>
This PR enables the user to configure the maximum command length for
OpenThread's CLI using Zephyr's shell, which is currently fixed to
256 characteres. This limitation was not enough for certain allowed
OpenThread commands, like some variants of 'ot dataset mgmtsetcommand'.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
When `z_get_fd_obj_and_vtable()` function returns NULL (no valid entry
in the FD table for the socket), there is no need for further usermode
checks on the `ctx` pointer, as there is nothing to invalidate in that
case.
Fixes#25990Fixes#25991
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The original sockets system calls used file descriptors which
were actually net_context pointers. For all socket system calls,
any calls from user mode would check if the caller had permission
to use the net context.
This was later changed to not stuff net_context pointers into file
descriptors, but all the permission checking was unintentionally
lost, allowing all threads on the system to
read/write all socket file descriptors in the system at will, with
no way to isolate applications running on the same microcontroller
from each other's network activity.
This patch restores the permission checks on network context objects
for socket system calls that originated from user mode.
The call to z_object_recycle() was never removed from
zsock_socket_internal(); this is again leveraged to grant the
caller who opened the socket permission on the net_context
associated with the returned file descriptor.
To ensure that all socket calls do this checking, all uses of
z_get_fd_obj_and_vtable() have been routed through get_sock_vtable().
Objects have initialization state set and thread permissions
reset to just the caller in common zsock_socket() code.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The socketpair file descriptor context objects are heap allocated
and not drawn from a static pool. Register these as kernel objects
when we create them if user mode is enabled.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Zephyr running on MPU devices have a different memory model than
process-oriented OSes like Linux and require a method to set
kernel object permissions on a file descriptor's underlying
context object. Add this, and a test to show that it is working.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Used for permission validation when accessing the associated file
descriptors from user mode.
There often get defined in implementation code, expand the search
to look in drivers/ and subsys/net/.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
If we are calling sendmsg() without any aux data, then msg_controllen
is 0 and msg_control is NULL. Check these allowed values properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we are calling sendmsg() for a connected socket, then msg_namelen
is 0 and msg_name is NULL. Check these allowed values properly.
Also modify unit tests so that we test this scenario.
Fixes#25925
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In this, case is_nonblock is false and will_block is true.
Therefore, we *may* block, and furthermore we *expect* to
block. Checking is_nonblock is, in fact, redundant, and
passing K_FOREVER to k_sem_take() is justified.
Fixes#25727
Coverity-CID: 210611
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
OpenThread moved from 4 to 5 debug levels and it was not possible
to configure all of them with Kconfig.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
There was a possible race condition between sock_is_nonblock()
and k_sem_take() in spair_read() and spair_write() that was
mitigated.
Also clarified some of the conditional branching in those
functions.
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Replace:
DT_FLASH_ERASE_BLOCK_SIZE ->
DT_PROP(DT_CHOSEN(zephyr_flash), erase_block_size)
DT_FLASH_WRITE_BLOCK_SIZE ->
DT_PROP(DT_CHOSEN(zephyr_flash), write_block_size)
As this allows us to phase out the old generator.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Adding RFC1350 compliant support for TFTP Client in Zephyr. The
current implementation is minimal and only supports the ability
to get a file from the server.
Things for the future include support for putting files to
server and adding support for RFC2347.
Signed-off-by: Bilal Wasim <bilalwasim676@gmail.com>
So far socket errors reported by poll/recvfrom were ignored, which could
lead to an unexpected behavior when socket was left in an undefined
state.
Fix this, by requesting a re-registration in the LWM2M state machine,
which will close the faulty socket and open a new one. Note, that simply
closing and re-opening a socket in the lwm2m engine would not work,
since this would silently invalidate any open observations on the
lwm2m server side (due to port number change). Triggering a fresh
registration will notify the server to update its observations.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
SNTP implementation defined symbols like "MODE_MASK", which can easily
conflict with similary laxly defined symbols in other modules, and
indeed, we hit a case like that (below). So, prefix these symbols
consistently with "SNTP_", until more clear private namespacing
convention are made pervasive in Zephyr.
subsys/net/lib/sntp/sntp_pkt.h:14: error: "MODE_MASK" redefined
include/arch/arm/aarch32/cortex_a_r/cpu.h:17: note: this is the
location of the previous definition
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
On OT network with poor coverage, very often request/observe packets
doesn't get it's ACK and consumes from pendings/replies/message stacks.
In such cases when LWM2M engine tries to recover by resetting its state,
it fails because of lack of free messages.
Signed-off-by: Kiril Petrov <retfie@gmail.com>
In networks with high latencies (like NB-IoT), it's quite common to
recieve duplicated response. It's not an error condition, a correct way
to handle it is to simply ignore the duplicate. Lower the log level for
this event, not to disturb users.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The retaransmission logic was not correct in the lwm2m_engine, and could
lead to faulty behavior in case multiple messages were pending for
retransmission in the queue.
1. Since there is a singe delayed work item for entire retransmission
queue, `coap_pending_next_to_expire` should be called before
scheduling next timeout, to identify which message is going to expire
next (and when). Currently, the engine always set next timeout, based
on timeout from the message being currently re-transmitted.
2. In case the message was re-transmitted several times, and is removed
from the retansmission queue due to a timeout, next retransmission
should be scheduled, in case there are other messages on the queue.
3. Verify the timeout of the earliest message to expire in the
retransmission handler. In case messages from the beginning of the
queue were removed, we might need to schedule the retransmission
again, instead of sending message rightaway.
4. `lwm2m_send_message` is not handling retransmissions anyway, so
there's no need to check send attempts. Instead, verify
retransmission work item is already pending, and update its timeout
if needed.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
So far, coap_pending structure kept track only of the timeout interval
between two consecutive retransmissions. Calculations inside
`coap_pending_next_to_expire` relied only on this value. This approach
gives incorrect results though, in case multiple messages are pending
for retransmission.
For instance, assuming initial retransmission timeout is set to 2
seconds. If some message had been retransmitted already, its timeout
would be increased to 4 seconds. Any new message added to the pending
list would have a retransmission timeout set to 2 seconds, and will be
returned as a first message to expire, no matter how long the initial
message was already on the list.
To resolve this, add a `t0` field to the coap_pending structure. This
field is initialized to the initial transmission time, and is increased
on each retransmission by the retransmission timeout.
`coap_pending_next_to_expire` uses this value to calculate absolute
time, when the next retransmission should take place, and based on this
information returns correctly first pending message to expire.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Replace DT_FLASH_DEV_NAME with DT_CHOSEN_ZEPHYR_FLASH_CONTROLLER_LABEL.
We now set zephyr,flash-controller in the chosen node of the device
tree to the flash controller device.
NOTE: For a SoCs with on die flash, this points to the controller and
not the 'soc-nv-flash' node. Typically the controller is the
parent of the 'soc-nv-flash' node).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The LwM2M stack would previously ignore all OPAQUE resources when
reading them. This meant that it was impossible to read them, even if
there was a custom read callback.
Signed-off-by: Göran Weinholt <goran.weinholt@endian.se>
During registration, first thing LWM2M does is trying to close a socket
indicated by sock_fd stored in its context. In case it is not
initialized to some invalid value (-1 in this case), LWM2M may close an
ambigous socket.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Bug fix and improved `payload` handling in `http_client_req`.
Changes to `http_client_req` behaviour:
If the user provides `payload_len` it is used to generate the
`Content-Length` header. This is done even if `payload_cb` is used to
provide the actual data. If no `payload_len` is specified then no
`Content-Length` is generated.
If `payload_cb` is provided it is called to send the payload data.
Otherwise `payload` is used as the payload buffer and sent. If
`payload_len` is not zero, it is used as the size of `payload`.
Otherwise `payload` is assumed to be a string and `strlen` is used to
determine its size. This is to maintain current behaviour and not break
existing samples.
Fixes#24431
Signed-off-by: Arvin Farahmand <arvinf@ip-logix.com>
Cell ID resource was not initialized properly in the Connectivity
Monitoring object, making it unusable from the application.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Set information about Frame Pending Bit from the ACK response in the
frame passed to OpenThread.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Replace CONFIG_ENTROPY_NAME with DT_CHOSEN_ZEPHYR_ENTROPY_LABEL. We now
set zephyr,entropy in the chosen node of the device tree to the entropy
device.
This allows us to remove CONFIG_ENTROPY_NAME from dts_fixup.h. Also
remove any other stale ENTROPY related defines in dts_fixup.h files.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fill the mTimestamp filed in OpenThread frame based on the net_pkt
timestamp value (only if NET_PKT_TIMESTAMP is enabled).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This change is to allow access to the firmware block context in order to
give the firmware update callback implementation an indication of when
to reset the flash context. Additionally, it allows for a validity check
between the total expected size downloaded and the actual size
downloaded. A simple implementation can check if the block context's
current downloaded blocks is equal to the expected block size in order
to determine if the flash context needs to be reset. This approach
seemed the simplest, and knowing the firmware block context can have
other purposes. This has been tested by accessing the block context
during the update in the block received callback and confirming that the
callback had information regarding the current downloaded bytes.
Fixes#16122
Signed-off-by: Kyle Sun <yaomon18@yahoo.com>
Received frames shall be handled in the OpenThread thread, not in
the receiver thread.
Passed received frame to the function that will handle it in a proper
thread instead of calling otPlatRadioReceiveDone directly.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
OpenThread received frame handling shall be done in the OpenThread
thread.
Created API to pass net packets to the proper thread and handle them
there.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
The time parameter cannot be K_NO_DELAY because the time delay
parameter is ms so using value 0 instead.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Mention in websocket API documentation that the timeout value
is in milliseconds. Check timeout values properly using K_TIMEOUT_EQ()
macro.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use k_timeout_t internally, no change to user API.
Clarify the documentation of the timeout parameter that it is
in milliseconds.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use 64-bit time in order to avoid overlaps, and do not use K_MSEC()
as that will convert to k_timeout_t which we do not want in this
case.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
OpenThread uses "tx started" notification to start ACK
timeout if the driver does not support it.
In order for this to be achieved tx task needs to run in parallel
to the OpenThread task, otherwise it may delay the gap between
cca and tx or run after transmission has already finished.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
The function calculates the number of octets put, but does not return
it. Call sites check for non-zero values suggesting this is a bug.
See https://habr.com/en/company/pvs-studio/blog/495284/ fragment 12.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Use the size of the target buffer as the maximum length when
formatting with snprintf.
See https://habr.com/en/company/pvs-studio/blog/495284/ fragment 3.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Even though radio driver can report in its capabilities that it does
support CSMA CA, there's no way in the driver to select how the frame
should be transmitted (with CSMA or without). As layers above radio
driver (Thread, Zigbee) can expect that both TX modes are available, we
need to extend the API to allow either of these modes.
This commits extends the API `tx` function with an extra parameter,
`ieee802154_tx_mode`, which informs the driver how the packet should be
transmitted. Currently, the following modes are specified:
* direct (regular tx, no cca, just how it worked so far),
* CCA before transmission,
* CSMA CA before transmission,
* delayed TX,
* delayed TX with CCA
Assume that radios that reported CSMA CA capability transmit in CSMA CA
mode by default, all others will support direct mode.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Implemented blocking OpenThread otPlatRadioGetRssi api function using
no-blocking energy scan function from radio driver api interface.
Signed-off-by: Tomasz Konieczny <tomasz.konieczny@nordicsemi.no>
k_sleep() now takes a k_timeout_t so an integer value needs to be
wrapped through the appropriate macro, in this case K_SECONDS().
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Verify that `ed_scan` is implemented by the radio driver before use. In
case it's not, return appropriate error code to OpenThread.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Identify when received PUBLISH message is malformed and overall packet
length received is smaller than parsed variable header lenght.
Add unit test to cover this case.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Verify more strictly that data read from the transport fits into RX
buffer. Switch to unsigned integers, where possible, to prevent
unnecessary signed/unsigned operations.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The standard allows up to 4 bytes of packet length data, while current
implementation parsed up to 5 bytes.
Add additional unit test, which verifies that error is reported in case
of invalid packet length.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case OPENTHREAD_NCP option is disabled, uart.c platform driver should
not be compiled as it misses dependencies.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When NCP starts-up some of the initialisation functions of a regular
OpenThread device do not need to be called, because they get triggered
by wpantund via UART. Instead NCP initialisation needs to be called.
A small typo has been fixed as well.
Also initialisation for raw link packet interface has been added. Can be
used for picking up 802.15.4 frames and interpreting them in the
application.
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
If the network interface is down, we should timeout properly
and let the application to handle the situation.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we are receiving UDP packet and if there is some error happening
inside zsock_recv_dgram(), then make sure that the net_pkt received
from recv_q is freed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Contents of mqtt_3_1_0_proto_desc and mqtt_3_1_1_proto_desc were logged
with following code:
MQTT_TRC("Encoding Protocol Description. Str:%s Size:%08x.",
mqtt_proto_desc->utf8, mqtt_proto_desc->size);
This resulted in invalid log, since they were not NULL-terminated
strings. Use MQTT_UTF8_LITERAL() to initialize both utf8 strings to make
sure they are NULL-terminated now and valid to print and
log. Additionally this makes the code a bit shorter.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
There are scenarios where there is a NAT firewall in between MQTT
client and server. In such case, the NAT TCP timeout may be shorter
than MQTT keepalive timeout and TCP timeout. The the MQTT ping
request message is dropped by the NAT firewall, so that it cannot be
received by the server, resulting in void MQTT ping response message.
There is no TCP FIN or RST at all. The application looks hang-up
until TCP timeout happens on the client side, which may take too
long.
Therefore, the event MQTT_EVT_PINGRESP is added to inform the
application that the route between client and server is still valid.
Signed-off-by: PK Chan <pak.kee.chan@nordicsemi.no>
OpenThread has api to make use of radios energy scan feature.
Implemented this api in zephyr. This allows thread to perform energy
scan when needed.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
According to LWM2M specification, when Queue Mode is used, the LWM2M
client should keep the reciever on for specified time after sending A
CoAP message. This commit adds a new LWM2M event,
`LWM2M_RD_CLIENT_EVENT_QUEUE_MODE_RX_OFF`, to facilitate the process by
notifying the application when it's safe to turn the receiver off.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add Kconfig option to enable Queue Mode binding. With this option
enabled, the LWM2M client will register with `UQ` binding, instead of
`U`.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Older OT code used preprocessor #if conditionals, while newer code
used IS_ENABLED macro. Unify the approach by switching to the latter
option.
Additinally, fix inclusion issue that came out after switching to
IS_ENABLED.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add new transport handler for MQTT, with sendmsg-like functionality.
This allows TCP transport to send PUBLISH packets w/o fragmentation at
the TCP layer. Implement this new functionality for all existing
transports.
Fixes#22679
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
`mqtt_transport_write` failue was logged with `errno` value which is not
correct as the return value from the function is valid in this case.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
TLS sockets did not increase refcount of a net_context running TCP,
which could lead to a crash upon TCP disconnection.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If CONFIG_NET_PKT_RXTIME_STATS is set, then update the received
packet RX time for packet sockets (SOCK_RAW). This was already
working for normal sockets but the statistics update was missing
from SOCK_RAW.
Fixes#22489
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
commit e3dc05f14d ("net: config: Wait network interface to come up")
introduced check_interface() function, which accidentally has 2
different signatures depending on CONFIG_NET_NATIVE selection.
Let's fix the second signature to be correct.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/22693
Signed-off-by: Michael Scott <mike@foundries.io>
The zsock_accept_ctx() calls z_reserve_fd() on entry but fails
to call z_free_fd() on failure. This will leak the allocated
socket descriptor.
Fixes#22366
Signed-off-by: Inbar Anson Bratspiess <inbar.anson.bratspiess@330plus.net>
I think people might be reading differences into 'if' and 'depends on'
that aren't there, like maybe 'if' being needed to "hide" a symbol,
while 'depends on' just adds a dependency.
There are no differences between 'if' and 'depends on'. 'if' is just a
shorthand for 'depends on'. They work the same when it comes to creating
implicit menus too.
The way symbols get "hidden" is through their dependencies not being
satisfied ('if'/'depends on' get copied up as a dependency on the
prompt).
Since 'if' and 'depends on' are the same, an 'if' with just a single
symbol in it can be replaced with a 'depends on'. IMO, it's best to
avoid 'if' there as a style choice too, because it confuses people into
thinking there's deep Kconfig magic going on that requires 'if'.
Going for 'depends on' can also remove some nested 'if's, which
generates nicer symbol information and docs, because nested 'if's really
are so simple/dumb that they just add the dependencies from both 'if's
to all symbols within.
Replace a bunch of single-symbol 'if's with 'depends on' to despam the
Kconfig files a bit and make it clearer how things work. Also do some
other minor related dependency refactoring.
The replacement isn't complete. Will fix up the rest later. Splitting it
a bit to make it more manageable.
(Everything above is true for choices, menus, and comments as well.)
Detected by tweaking the Kconfiglib parsing code. It's impossible to
detect after parsing, because 'if' turns into 'depends on'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
When is NET_SOCKETS_SOCKOPT_TLS set, it should set TLS_CREDENTIALS
even when NET_NATIVE=n, so that platforms that use socket offloading
can continue to set TLS credentials.
We are now setting this via 'imply' instead of 'select', so that
prj.conf can opt out if necessary.
Fixes#22390
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Instead of using a custom offloading interface, users can use
`NET_SOCKET_REGISTER` macro to register custom socket API provider. This
solution removes a limitation, that only one offloaded interface can be
registered and that it cannot be used together with native IP stack.
The only exception remainig are DNS releated operations -
`getaddrinfo`/`freeaddrinfo`, which, when offloaded, have to be
registered specifically.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Sort out mbedTLS dependencies in sockets Kconfig. mbedTLS will now
be enabled when TLS sockets and native network stack are enabled.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Users of mqtt_live() have no idea when it actually sends a ping.
As a result it's very hard to know when to use mqtt_input() to
process the incoming PINGACK.
Instead of returning a 0 result when a ping isn't generated in
mqtt_live(), let's return -EAGAIN.
Signed-off-by: Michael Scott <mike@foundries.io>
Make sure that if we receive websocket data in small chunks,
the parsing and returning of data to caller is done properly.
Fixes#21989
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The MQTT connection is closed in case an mqtt_ping fails anyway, so
it's better to let the application know early that something went
wrong.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As mDNS requests set DNS id to 0, we cannot use it to match
the DNS response packet. In order to allow this functionality,
create a hash from query name and type, and use that together
with DNS id to match request and response.
Fixes#21914
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make ioctl handlers of `ZFD_IOCTL_POLL_PREPARE` and
`ZFD_IOCTL_POLL_UPDATE` return an error code instead of setting errno
variable.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add function that returns remaining time until next keep alive message
shall be sent. Such function could be used for instance as a source
for `poll` timeout.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
generated_dts_board.h is pretty redundant and confusing as a name. Call
it devicetree.h instead.
dts.h would be another option, but DTS stands for "devicetree source"
and is the source code format, so it's a bit confusing too.
The replacement was done by grepping for 'generated_dts_board' and
'GENERATED_DTS_BOARD'.
Two build diagram and input-output SVG files were updated as well, along
with misc. documentation.
hal_ti, mcuboot, and ci-tools updates are included too, in the west.yml
update.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
After sending the MQTT disconnect message, no response is expected,
therefore it makes little sense to delay the socket closure.
So far it was expected to call `mqtt_input` function after calling
`mqtt_disconnect` in order to close the socket, which is
counter-intuitive. Simplify this, by closing the socket rightaway
in the `mqtt_disconnect` function.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
OpenThread settings implementation built on top of Zepyhr settings
submodule.
With this solution, OpenThread settings are identified with keys of
the following format: `ot/id/instance`, where `id` is assigned by
OpenThread stack, and `instance` is a 32-bit random number, both in
hex. The implementation makes use of `settings_load_subtree_direct`
function to iterate over settings instances. This allows the
OpenThread settings layer to be a fully transparent shim layer between
OpenThread/Zephyr APIs.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If we can write to the socket in POLLOUT, then there is no need to
wait.
Note that this is not a full POLLOUT implementation but prevents
the code from waiting even if we could send data out.
Fixes#18867
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Maintain a simple count of how many PINGREQ have been sent for the
current connection that have not had a corresponding PINGRESP. Nothing
is done with this information internal to the MQTT driver, but it is
exposed to the application layer to monitor as desired.
Signed-off-by: Justin Brzozoski <justin.brzozoski@signal-fire.com>
Based on work by Michael Scott.
Add a new Kconfig knob, CONFIG_LWM2M_IPSO_TIMESTAMP_EXTENSIONS. This
defaults to n. When enabled, various IPSO objects will by default have
the timestamp resource (5518) added to their representations. This can
be turned off on a per-object basis.
The idea of adding timestamp resources was originally suggested by
Hannes Tschofenig on this OMA page:
https://github.com/OpenMobileAlliance/OMA_LwM2M_for_Developers/issues/429
Signed-off-by: Michael Scott <mike@foundries.io>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Follwing the convention in Zephyr, all CMake configuration related to
a module, should be placed within the module repostiory.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
IPv4 header options length will be stored in ipv4_opts_len
in net_pkt structure. Now IPv4 header length will be in
net_pkt ip_hdr_len + ipv4_opts_len. So modified relevant
places of ip header length calculation for IPv4.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
OpenThread recently introduced CMake build system into its repostiory
so we no longer need autotools to build OpenThread libraries and can
integrate them natively.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The TCP code expects that we know when the socket has called accept()
in order to continue connection attempt.
Fixes#21335
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Functions like `setup_ipv4` or `setup_ipv6` might already use the
`counter` semaphore, therefore it should be initialized before these
functions are called.
As a result of this issue, the network stack could stall until timeout
under certain circumstances (e.g. when OpenThread was used).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Before we try to set IP addresses to the network interface,
make sure that the interface is up.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
OpenThread radio layer did not implement `ieee802154_radio_handle_ack`
API and provided fake ACK frame to the OpenThread.
This prevented proper Sleepy End Device operation, as it expects to
receive information in the ACK whether it should wait for more data to
come or should it put the radio to sleep.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add an implementation for `sendmsg`, so secure sockets can be used
together with the WebSocket module to implement secure WebSockets
("wss").
Fixes#20431
Signed-off-by: Markus Fuchs <markus.fuchs@de.sauter-bc.com>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Clean up space errors and use a consistent style throughout the Kconfig
files. This makes reading the Kconfig files more distraction-free, helps
with grepping, and encourages the same style getting copied around
everywhere (meaning another pass hopefully won't be needed).
Go for the most common style:
- Indent properties with a single tab, including for choices.
Properties on choices work exactly the same syntactically as
properties on symbols, so not sure how the no-indentation thing
happened.
- Indent help texts with a tab followed by two spaces
- Put a space between 'config' and the symbol name, not a tab. This
also helps when grepping for definitions.
- Do '# A comment' instead of '#A comment'
I tweaked Kconfiglib a bit to find most of the stuff.
Some help texts were reflowed to 79 columns with 'gq' in Vim as well,
though not all, because I was afraid I'd accidentally mess up
formatting.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Added in commit 106a0f7306 ("net: lib: config: Add SYS_INIT handler to
set clock from SNTP"), never used.
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Handle this corner case with TCP connection closing:
1) Client A connects, it is accepted and can send data to us
2) Client B connects, the application needs to call accept()
before we will receive any data from client A to the application.
The app has not yet called accept() at this point (for
whatever reason).
3) Client B then disconnects and we receive FIN. The connection
cleanup is a bit tricky as the client is in half-connected state
meaning that the connection is in established state but the
accept_q in socket queue contains still data which needs to be
cleared.
4) Client A then disconnects, all data is sent etc
The above was not working correctly as the system did not handle the
step 3) properly. The client B was accepted in the application even
if the connection was closing.
After this commit, the commit called "net: tcp: Accept connections
only in LISTENING state" and related other commits are no longer
needed and are reverted.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This reverts commit d70a854904.
The next commit fixes the original issue so this commit is no
longer needed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
With this feature enabled (via CONFIG_NET_CONFIG_CLOCK_SNTP_INIT), an
application will automagically get correct absolute time via POSIX
functions like time(), gettimeofday(), etc.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Use the newest version of the OpenThread project, as updated in
https://github.com/zephyrproject-rtos/openthread/pull/2.
Introduce the following fixes along with the update (they're squashed to
retain bisectability of OT samples):
* Update configs and flags used
Some OT configs were renamed, some new were introduced that Zephyr port
needs to set.
* Add entropy platform driver
OpenThreads `random` platform subsystem was replaced with `entropy`
subsystem which is supposed to serve as an entropy source for the
generic OpenThread's random generator.
* Halt OT thread when OT command is processed
OpenThread can currently be processed from two threads - a
genuine OpenThread thread and shell thread, which processes CLI
commands. This could cause trouble, when context was switched
during OT command processing (i.e. switched to process an incomming OT
message, while still in unfinished command handler).
In result, it was not possible to turn the commissioner role on via
CLI, as the commissioner petition response was handled before the
Commissioner::Start function finished its execution (if the
petitioner is also the network leader, all messages are passed
internally within the stack).
Fix this by suspending the OT thread for the time of an OT command
processing.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Applications should use setsockopt() to setup the SOCKS5 proxy,
so the old API file, which is using net_context directly, is
moved SOCKS5 directory.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fix GCC "warning: 'ipv4' defined but not used [-Wunused-variable]" and
"warning: 'ipv6' defined but not used [-Wunused-variable]" when either
IPv4 or IPv6 support is not enabled.
Signed-off-by: Markus Fuchs <markus.fuchs@de.sauter-bc.com>
LWM2M_FIRMWARE_UPDATE_PULL_LOCAL_PORT is unused since commit 54c10c04e5
("net: lwm2m: use security data for connections").
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Unused since commit d1cb39e7ce ("net: lwm2m: migrate LwM2M library to
BSD-sockets API").
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
With `CONFIG_NET_NATIVE`, offloaded drivers can specify capabilites with
`NET_IPV4/6` configs, so there is no longer need to handle socket
offloading separately.
Also, initialize hints structure with zeros, as according to man pages
unused fields should be set to 0:
`All the other fields in the structure pointed to by hints must contain
either 0 or a NULL pointer, as appropriate.`
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add new config option `LWM2M_DNS_SUPPORT` to the LWM2M library, instead
of relying on `DNS_RESOLVER` which is only compatible with native
network stack. This allows to use DNS with offloaded interfaces
seamlessly.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This is related to commit 1a6f4a6368 ("net: tcp: Accept
connections only in LISTENING state") which made the system
to only accept new connections if the application had called
accept(). Unfortunately the TLS accept was not fixed by that
commit so we were in wrong state when accepting TLS sockets.
This commit fixes that issue.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Calculate how long on average net_pkt has spent on its way from
network device driver to the application. The data is only
calculated for UDP and TCP network packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Re-run with updated script to convert integer literal delay arguments
to k_thread_create and K_THREAD_DEFINE to use the standard timeout
macros.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The MQTT transport API functions are already documented in
mqtt_transport.h so need to duplicate them in individual
transport .c file.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Randomly generating ID the first time coap_next_id() is called is more
in accordance with CoAP recommendations (see
https://tools.ietf.org/html/draft-ietf-core-coap-18, section 4.4)
"It is strongly recommended that the initial value of the
variable (e.g., on startup) be randomized, in order to make successful
off-path attacks on the protocol less likely."
Doing this in a dedicated init function is the cleanest and most
idiomatic approach. This init function is not exposed publically which
means it will be called only once, by the network stack init procedure.
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
create_ipv6_answer() function is behind #define's but get used behind
IS_ENABLED(CONFIG_NET_IPV6), which is not allowed.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Use the int_literal_to_timeout Coccinelle script to convert literal
integer arguments for kernel API timeout parameters to the standard
timeout value representations.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Cast a %lld argument to long long int. This is causing warnings on
recent GNU Arm Embedded toolchains, which fail the build with
-Werror=format=.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Do not try to re-use net_context.user_data field as in many places
(like in accept) it is expected to contain pointer to net_context.
Storing the socket flags will corrupt the value. To simplify and
make things less error prone, use socket specific field in net_context
to store the socket flags.
Fixes#19191
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
So far OpenThread compiled it's own, internal copy of mbedTLS library.
This commit changes this behavior by using Zephyr's mbedTLS instance
appropriately configured for OpenThread needs.
Generic mbedTLS config file was used in this case, so that application
can still configure remaining parts of mbedTLS for it's own needs.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The socket flags are stored in void* so we need to use uintptr_t
instead of u32_t when manipulating the flag variable.
Fixes#19181
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If socket is marked non-blocking, then accept() will return immediately
if there is no one connecting.
Fixes#19103
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
SNTP is UDP-based protocol, and thus not reliable. Previously,
high-level aka "simple" SNTP just issues a single request via
the low-level SNTP API. Instead, send multiple requests, starting
with a small timeout, and exponential backoff, repeated within
timeout specified by user in call to sntp_simple().
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Previously, they were tested only with CONFIG_NET_SOCKETS_POSIX_NAMES,
but should also work with POSIX subsys. Achieve this by including POSIX
headers in this case.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If proto field in socket() call is set to 0, then we should have
a sane default for it that depends on the type of the socket.
Fixes#18873
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The semi-automated API changes weren't checkpatch aware. Fix up
whitespace warnings that snuck into the previous patches. Really this
should be squashed, but that's somewhat difficult given the structure
of the series.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
These calls are buildable on common sanitycheck platforms, but are not
invoked at runtime in any tests accessible to CI. The changes are
mostly mechanical, so the risk is low, but this commit is separated
from the main API change to allow for more careful review.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
System call arguments, at the arch layer, are single words. So
passing wider values requires splitting them into two registers at
call time. This gets even more complicated for values (e.g
k_timeout_t) that may have different sizes depending on configuration.
This patch adds a feature to gen_syscalls.py to detect functions with
wide arguments and automatically generates code to split/unsplit them.
Unfortunately the current scheme of Z_SYSCALL_DECLARE_* macros won't
work with functions like this, because for N arguments (our current
maximum N is 10) there are 2^N possible configurations of argument
widths. So this generates the complete functions for each handler and
wrapper, effectively doing in python what was originally done in the
preprocessor.
Another complexity is that traditional the z_hdlr_*() function for a
system call has taken the raw list of word arguments, which does not
work when some of those arguments must be 64 bit types. So instead of
using a single Z_SYSCALL_HANDLER macro, this splits the job of
z_hdlr_*() into two steps: An automatically-generated unmarshalling
function, z_mrsh_*(), which then calls a user-supplied verification
function z_vrfy_*(). The verification function is typesafe, and is a
simple C function with exactly the same argument and return signature
as the syscall impl function. It is also not responsible for
validating the pointers to the extra parameter array or a wide return
value, that code gets automatically generated.
This commit includes new vrfy/msrh handling for all syscalls invoked
during CI runs. Future commits will port the less testable code.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
If we are returned IPv4 address but the hints says IPv6, then
return error as currently we do not support AI_V4MAPPED addresses.
Same check for IPv6 if we want only IPv4 address.
Fixes#18870
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Issue noticed with following scenario.
1) TCP server is listening for connections but will handle
only one connection at a time (e.g. echo-server sample)
2) Client A connects, and the connection is accepted.
3) Client B connects, instead of denying a connection,
it is "auto" accepted (this is the actual bug) even
if the application has not called accept().
4) After the connection A is closed, the connection B
gets accepted by application but now the closed
connection A will cause confusion in the net-stack
5) This confusion can cause memory leak or double free
in the TCP core.
It is not easy to trigger this issue because it depends
on timing of the connections A & B.
Fixes: #18308
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Allow user to disable native IP stack and use offloaded IP
stack instead. It is also possible to enable both at the same
time if needed.
Fixes#18105
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add new RD Client API of lwm2m_rd_client_stop() for this
Fix issues of de-register and event reporting in RD Client
Signed-off-by: Jun Qing Zou <jun.qing.zou@nordicsemi.no>
The LwM2M implementation for DNS resolving has checks which
configure hints based on whether IPv4 or IPv6 are enabled.
Neither of them need enabled if using NET_SOCKETS_OFFLOAD,
which then causes an error to be returned to due to
"hints.ai_family" not being set.
Also the offload API need to know when to free the allocated
"struct addrinfo" instead of calling free() generically,
thus let's use the freeaddrinfo() API for sockets which will
call into the offload API if needed.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/18765
Signed-off-by: Jun Qing Zou <jun.qing.zou@nordicsemi.no>
When the firmware_pull mechansim sends the callback to notify the
sample of a new firmware block, the user supplied buffer can be
smaller than the CoAP BLOCK_SIZE setting. To handle this case,
we loop through the payload and fill the user supplied buffer with
smaller chunks.
Unfortunately, the last_block calculation is done outside this loop
which causes several callbacks (while in this loop) to have
last_block true. Let's fix this by adding a small check to make
sure we're at the end of the current payload block before notifying
the user of a last_block.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/16158
Signed-off-by: Michael Scott <mike@foundries.io>
The mDNS packet receive had issues:
* The DNS id needs to be 0 for both sending and receiving, we did
not accepted 0 incoming id.
* The mDNS response does not have any questions in it so we just
need to skip the question count checks in response.
* Skip the Cache-Flush bit in Class field so that we can properly
parse CLASS_IN value.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In DNS server init, print information whether the DNS server
is mDNS or LLMNR one. This way we do not need to remember what
IP addresses are used either of them.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The source UDP port in all Multicast DNS responses MUST be 5353
as described in RFC 6762 chapter 6.
Fixes#18732
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure we use the IPv4 event command when checking IPv4 address
add or delete instead of event mask.
Coverity-CID: 203483
Fixes#18400
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When val1 is 0, we need to handle a negative val2 value so that we
generate correct TLV value.
Example: val1 = 0, val2 = -500000 is equivalent to -0.5 decimal.
Currently we generate: 0.5 (losing the sign).
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/16154
Signed-off-by: Michael Scott <mike@foundries.io>
Current JSON formatting for float32/64 is broken in a similar way as
plain text. Let's use the newly fixed logic for plain text to
generate the float32/64 values in the JSON string.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/16154
Signed-off-by: Michael Scott <mike@foundries.io>
We can use the plain text float32/64 formatter for JSON as well, so
let's expose the put_float32/64 functions.
Signed-off-by: Michael Scott <mike@foundries.io>
Formatting a float32/64 value for plain text is broken.
Example for 32bit: val1=0 and val2=500000 is equivalent to 0.5
Current formatter was using %d.%d (%lld.%lld for 64bit) so
exported value was 0.500000 (or 0.5)
To fix this, for val2 use a zero-padded formatter for the maximum
length of each bit length (6 for 32bit and 9 for 64bit), and then
remove the zero characters at the end of the string.
Notes re: handling of val1/val2 signs:
- eliminate potential negative sign when converting val2 to avoid:
a value like: 0.-5
- use negative val2 when val1 is 0 to fix small negative handling
such as -0.5
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/16154
Signed-off-by: Michael Scott <mike@foundries.io>
When the bootstrap support was added, it looks like I somehow missed
the handling block in the engine.
Let's add it now to fix boostrap support.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/18080
Signed-off-by: Michael Scott <mike@foundries.io>
- LWM2M_SECURITY_INSTANCE_COUNT wasn't following the standard of
having the unconditional default in the last position
- LWM2M_SERVER_INSTANCE_COUNT needs another instance when
bootstrap is enabled.
Signed-off-by: Michael Scott <mike@foundries.io>
LwM2M boostrap support is enabled via the config option:
LWM2M_RD_CLIENT_SUPPORT_BOOTSTRAP. If enabled, this config sets
the default # of server and security instances. However, this is
not working correctly because LWM2M_RD_CLIENT_SUPPORT_BOOTSTRAP
is defined below it's uses in the Kconfig file.
Let's move the RD_CLIENT configs higher in the Kconfig to fix this
behavior.
Signed-off-by: Michael Scott <mike@foundries.io>
Simplify algorithm to skip (aka calculate length) of encoded domain
name in a DNS answer. Now it's fully compliant to RFC 1035 regarding
handling of compressed FQDNs. Additionally, bounds checking is now
performed by the parsing code.
Fixes: #18334
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Let's use IS_ENABLED() instead of the #ifdef to get clearer code. ret
variable is used only at one place, no need for the ARG_UNUSED()
Coverity-CID: 203397
Fixes#18419
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Let's use IS_ENABLED() instead of the #ifdef to get clearer code. ret
variable is used only at one place, no need for the ARG_UNUSED()
Coverity-CID: 203468
Fixes#18420
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
IPv4 connection management status is stored in wrong
variable. ip_state should hold the status and then
it should be stored in state variable.
Fixes#18253
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When checking for total IP address counts, don't check
CONFIG_NET_IF_MAX_IPV6_COUNT twice. This was a typo for
CONFIG_NET_IF_MAX_IPV4_COUNT.
This was reported by IRC user: retfie
Signed-off-by: Michael Scott <mike@foundries.io>
- Commands were not gathered with the right macro
- bus fault access due to wrong declaration of iface_states external
variable.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Rename the socket_can implementation from CANBUS to CANBUS_RAW.
This is a preperation for 6LoCAN which is a CANBUS L2 for IPv6.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Before calling socket callback function, make sure the callback
function exists so that we do not get NULL pointer reference.
Fixes#18021
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Current SOCKS5 based connections in mqtt are only
TCP (nonsecure) based. To support TLS based SOCKS5
connections, new methods needs to be introduced.
Instead, removed CONFIG_MQTT_LIB_SOCKS based implementation.
And now mqtt provides an api to set proxy
(mqtt_client_set_proxy()) details. That's enough,
socket layer will take care of making connections through
proxy server.
Fixes: #17037
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Current SOCKS5 implementation is above socket level and every
higher layer protocol or application level needs to have
SOCKS5 related changes. This solution is based on socket
setsockopt(). Application caller has to set proxy details
through setsockopt() and socket:connect() will take care
creating connection.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The SO_SOCKS5 socket option can be used by the application to
set the SOCKS5 proxy details. These details will be used when
connecting to peer.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Several problems with memset usage in the LwM2M subsystem were
identified:
- Every single object that can have multiple instances is using
memset to initialize static resource data during init. This data
will already be set to 0 because it is static, so the memset
statements are unneeded.
- Instead of using memset during object init which is only called
one time during kernel startup, let's add a memset to the
object create function to ensure the resource data is cleared out.
It could have been used prior and then released via a DELETE op.
- the IPSO Timer object was setting a lot of data structure members
to 0 in the create function. Let's do 1 memset on the entire
structure and then only the non-zero values afterward.
Signed-off-by: Michael Scott <mike@foundries.io>
When presenting errors in lwm2m_engine_set() let's include the related
LwM2M path for easier debugging.
Signed-off-by: Michael Scott <mike@foundries.io>
This core LwM2M Object enables monitoring of parameters related to
network connectivity.
This is only the basic object structure. More work will be needed
to set the various resources based on connectivity.
Signed-off-by: Michael Scott <mike@foundries.io>
This Object is used to report the state of a momentary action push
button control and to count the number of times the control has
been operated since the last observation.
Signed-off-by: Michael Scott <mike@foundries.io>
LwM2M allows for multiple instance resources such the power source
resources in the device object. These types of resources have
always been very hard to work with, and frankly were poorly
implemented.
This led to other issues where it was very hard to have
non-sequential resource instances, and each resource of this type
needed special getter / setter methods such as:
lwm2m_device_add_pwrsrc()
lwm2m_device_set_pwrsrc_voltage_mv()
Going forward, as more LwM2M objects are implemented this just
doesn't scale well.
To fix this:
- split the resource instance data out from the resource data.
This includes the data pointer information and resource
instance id.
- add resource id and resource instance id to the event callback
functions so user's can see in more detail what resources and
resource instances are being handled.
- allow generic functions like lwm2m_engine_get_*() and
lwm2m_engine_set_*() to access resource instance data.
- adjust object resource initialization macros to map resource
instances to resources at the time of object instance
creation.
- fix up the lwm2m_client as a reflection of all of these changes.
Signed-off-by: Michael Scott <mike@foundries.io>
Due to work combining data into the lwm2m_message structure, we no
longer need to pass the lwm2m_engine_obj parameter between
formatters and most of the operation handlers.
So, let's remove it.
Signed-off-by: Michael Scott <mike@foundries.io>
The multi_max_count is no longer used and can be removed from the
obj_field structure if we change all of the OBJ_FIELD() macros to
use OBJ_FIELD_DATA() instead.
Technically, OBJ_FIELD() and OBJ_FIELD_DATA() are now the same, but
we're keeping them both for the time being. In the future, more
fields may be added to the obj_field structure and we can use the
OBJ_FIELD() macro again if that's the case.
Signed-off-by: Michael Scott <mike@foundries.io>
- Several of the functions use "path" as the parameter name for the
string-based LwM2M path. Let's clarify by using "pathstr".
- Recent updates to the LwM2M engine now support resource instances
when parsing the LwM2M path. Let's update descriptions accordingly.
Signed-off-by: Michael Scott <mike@foundries.io>
Per IPSO Light Control definition from the OMA LwM2M registry:
http://www.openmobilealliance.org/tech/profiles/lwm2m/3311.xml
There is an optional "Application Type" string resource (5750) in the
Light Control object. This was missed in the initial implementation.
NOTE: sample will assign reference if needed.
Signed-off-by: Michael Scott <mike@foundries.io>
We are pre-allocating a storage variable for the application type
resource in the IPSO Timer object. This is an optional resource
which won't always be set by samples.
Let's leave out the pre-allocated variable and let the sample set
this reference if needed (it's optional).
Signed-off-by: Michael Scott <mike@foundries.io>
Server records contain the default PMIN and PMAX settings for how
often we can send observe notifications. We are currently using
arbitrary defaults which cannot be changed when compiled or
during runtime.
Let's add Kconfig settings for the default settings to use and
also lookup the current values in the active server record when
an observe is added.
The actual PMIN/PMAX values can still be set via WRITE_ATTRIBUTE
operation.
Signed-off-by: Michael Scott <mike@foundries.io>
Currently the retransmit_work is not cancelled when closing a context,
making it operate on an invalid context.
LwM2M RD client also closes the context and initializes it again when
registration with the server fails, overwriting the active timeout and
breaking the timeout dlist.
Signed-off-by: Pieterjan Camerlynck <pieterjan.camerlynck@gmail.com>
Move CMake ExternalProject integration of OpenThread to the
CMakeLists.txt file within the OpenThread fork.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The SO_TXTIME socket option can be used by the application to
tell the network device driver the exact moment when the
network packet should be sent.
This feature is also implemented in Linux.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add BSD socket sendmsg() API that can be used to send data to peer
and also pass ancillary data to lower level of the network stack.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User could have set something to optval in getsockopt() and we
need to copy the data to kernel optval so that the socket family
code can use the value for something.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Certain Thread implementations (notably ARMs) require a DHCPv6
implementation.
Allow the usage of the relevant OpenThread configuration parameters in
Zephyr.
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
It currently only listens to relevant events about network interface to
decide whether raising connected or disconnected event.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Current implementation of LwM2M engine doesn't allow users a way
of overriding TLS credential load with custom function. This
would be needed by an offloaded TLS stack where we don't want
to use standard Zephyr functions.
Let's add a load_credential function pointer to the LwM2M client
context which will be called when it's available.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/17408
Signed-off-by: Michael Scott <mike@foundries.io>
When performing OTA using the LwM2M subsys, several logging errors
regarding log_strdup were noted. Let's fix these.
Signed-off-by: Michael Scott <mike@foundries.io>
If a sample wants to use the Zephyr implementation of mbedtls, it
enables CONFIG_MBEDTLS and sets any needed Zephyr-specific mbedtls
options.
Currently, the LwM2M subsystem selects MBEDTLS automatically when
LWM2M_DTLS_SUPPORT is enabled. Let's remove this and let the
LwM2M client sample enable mbedtls and it's options.
This mimics the behavior of several other network-related samples
and removes conflicts when selecting alternate implementations of
MBEDTLS.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/17399
Signed-off-by: Michael Scott <mike@foundries.io>
CONFIG_NET_IPV* checks are not needed in lwm2m_parse_peerinfo().
The functions used are always available. Worse, having these checks
forces the need to enable CONFIG_NET_IPV4 or IPV6 when it's not really
needed (LwM2M could be using an offloaded IP stack).
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/17401
Signed-off-by: Michael Scott <mike@foundries.io>
CONFIG_NET_IPV* checks are not needed in lwm2m_sprint_ip_addr(). The
functions used are always available. Worse, having these checks
forces the need to enable CONFIG_NET_IPV4 or IPV6 when it's not really
needed (LwM2M could be using an offloaded IP stack).
NOTE: Also fixes an issue where a NULL is returned when the IP address
is unknown. This usually ends up with a crash/abort in the logging
code.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/17401
Signed-off-by: Michael Scott <mike@foundries.io>
If DNS server(s) are added or removed e.g., as part of DHCP
processing, send newly defined net-mgmt events so that
a user application may get this information.
Fixes#16924
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The hostname needs to have log_strdup() when printing it.
Also it is useful to print information if the sending fails.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
- answer offset was 1 byte off.
- request offset, when copied into the answer, was off as well.
Fixes#16142
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The handcrafted allocation falls victim of misaligned structures due to
toolchain padding which crashes the socket test code on 64-bit targets.
Let's move it to the iterable section utility where those issues are
already taken care of.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Make sure the IPv4 and IPv6 socket addresses are initialized before
copying them. This avoids uninitialized memory access.
Coverity-CID: 199436
Fixes#17202
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This can be used to activate the network packet statistics
collection. Note that we do not have resources to calculate
each network packet transit times but we collect average times
instead.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Currently only setting and getting of Ethernet Qav options are
supported via this interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow application to listen network management events using
BSD socket API. Application needs to create the socket using
AF_NET_MGMT address family. At this point we only support
receiving network management events that the network subsystem
is sending.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This fixes the issue where observations are automatically reported using
the minimum period instead of the maximum. This causes notifications to
be sent more frequently than configured when the resource does not
change.
Signed-off-by: Pieterjan Camerlynck <pieterjan.camerlynck@gmail.com>
Current socket connect call implementation always takes
K_FOREVER timeout value, which blocks TCP connections
in case failure. TCP connections waits until it receives
SYN ACK. If there is no SYC ACK means, connect call is
blocked forever.
Added a Kconfig option to define timeout value. Default
value is 3000 milliseconds. User can modify it.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Modify dns_unpack_answer() function to check if the answer is
compressed or not, and return correct values regardless.
Fixes#16594
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This change will allow an MQTT client to override the compile-time
keepalive if desired. The change is structured such that the
compile-time default will still be setup by calling mqtt_client_init,
but can be changed by the application before calling mqtt_connect if
desired.
Signed-off-by: Justin Brzozoski <justin.brzozoski@signal-fire.com>
move misc/reboot.h to power/reboot.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/mutex.h to sys/mutex.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/math_extras.h to sys/math_extras.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/fdtable.h to sys/fdtable.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/byteorder.h to sys/byteorder.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/__assert.h to sys/__assert.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move flash.h to drivers/flash.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move entropy.h to drivers/entropy.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Return value from close() can be ignored in sntp_close()
as it is not returning value to caller anyway.
Coverity-CID: 198863
Fixes#16584
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We must query both IPv4 and IPv6 addresses if the hints parameter
is NULL i.e., user does not supply hints or if family is set to
AF_UNSPEC.
Fixes#16453
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This function uses mqtt_read_publish_payload_blocking to perform a
blocking read of the specified number of bytes.
When reading out a payload, the normal use case is to read the
entire payload. This function facilitates that use case.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
If the socket is closed, then do CAN detach if that is needed.
This way the CAN interrupts are not received if there are no
CAN sockets listening the data.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We need to dispatch the received CAN frame if there are multiple
sockets interested in the same CAN-IDs.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The query->len does not take 'Terminator' into account, shift over
one byte to prevent overwriting it with next field (Type).
This fixes mdns_resolver sample.
Fixes: 87eb552dd2 (net/dns: Switch mdns responder to new net_pkt API)
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Allow user to set the socket priority using setsockopt() call.
The priority value is used to order the networking queues so
that packets with a higher priority may be processed first.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It is possible that UDP header cannot be accessed so we need
to check that we do not do null pointer dereference.
Coverity-CID: 198866
Fixes#16581
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
These options are mutually exclusive, or more specifically,
CONFIG_POSIX_API has wider scope and supersedes
CONFIG_NET_SOCKETS_POSIX_NAMES. Implementation-wise, the two
options should not be defined at the same time, as that may
lead to declaration conflicts.
Fixes: #16141
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Offloaded `fcntl` implementation should be available for all offloaded
implementations, not specific for TI. `socket_offload.c` is already
conditionally compiled based on `CONFIG_NET_SOCKETS_OFFLOAD` option, so
there should not be conflicts for non-offloaded interfaces.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Due to commit a211afb0 ("logging: Add option to detect missed
transient string duplication"), the logs for LwM2M subsystem
is now spamming missing log_strdup() calls.
Let's add log_strdup() where needed.
Signed-off-by: Michael Scott <mike@foundries.io>
If a valid numeric IP address is provided as argument, it should
be resolved without contacting DNS server.
Also, implement handling of AI_NUMERICHOST.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
OpenThread uses CONFIG_OT_PLAT_FLASH_PAGES_COUNT to calculate the # of
pages at the end of flash to use for storing OpenThread settings.
This calculation has an off-by-one error which sets the offset for
the storage area as 1 page of flash too low.
For example, on nRF52840:
- default setting for CONFIG_OT_PLAT_FLASH_PAGES_COUNT is 4
- flash size is 1MB (0x100000)
- flash page size is 4096 (0x1000)
- expected offset is 0xfc000
Using the current logic we get an offset of: 0xfb000
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/16339
Signed-off-by: Michael Scott <mike@foundries.io>
From POSIX.1-2017:
The getsockname() function shall retrieve the locally-bound name of the
specified socket, store this address in the sockaddr structure pointed
to by the address argument, and store the length of this address in the
object pointed to by the address_len argument.
The address_len argument points to a socklen_t object which on input
specifies the length of the supplied sockaddr structure, and on output
specifies the length of the stored address. If the actual length of the
address is greater than the length of the supplied sockaddr structure,
the stored address shall be truncated.
If the socket has not been bound to a local name, the value stored in
the object pointed to by address is unspecified.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
If host is NULL and ai_flags are AI_PASSIVE in a call to
getaddrinfo(), need to return "any" address.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Use the new math_extras functions instead of calling builtins directly.
Change a few local variables to size_t after checking that all uses of
the variable actually expects a size_t.
Signed-off-by: Jakob Olesen <jolesen@fb.com>
Libraries that use mbedTLS have been invoking
zephyr_link_interface(mbedTLS). It is not clear what the intent of
this code has been, but it is redundant with the mbedTLS build
scripts, so it can be safely removed.
In addition to being redundant, it causes problems as it introduces an
ordering dependency, with this code mbedTLS must be declared before
users of mbedTLS are declared. Since this code is redundant, this
ordering dependency is also unnecessary.
This code is believed to have been added early on by accident and
copied through cargo-cult programming since.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
sntp_simple() function queries the server (passed as "addr[:port]"
string). It wraps calls to a number of other functions, and may be
useful to write simple, concise apps needing the absolute time.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Two utils to manipulate addresses in format "addr[:port]". I.e.,
network address (domain name or numeric), optionally followed by
port number:
* net_addr_str_find_port(), to return pointer to port number
substring (or NULL if not present).
* net_getaddrinfo_addr_str(), which is effectively getaddrinfo()
wrapper taking a "addr[:port]" string as a parameter.
The header file is named socketutils.h to emphasize that these
utility functions are implemented on top of BSD Sockets API
(and other POSIX/ANSI C functions), and thus portable to other
POSIX systems (e.g., Linux), so can be used in apps testing
POSIX compatibility. More utility functions (beyond address
manipulation) can be added later.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
It is convenient to have a blocking version of
`mqtt_read_publish_payload` function, for cases when it is called from
the event handler. Therefore, extend the 'mqtt_read_publish_payload'
argument list with information whether the call should block or not.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
It is possible that the device driver API pointer is null.
For example if the device driver returns an error, the device
code will make the API pointer NULL so that the API would not
be used. This can cause errors in networking code where we
typically do not check the NULL value.
Fixes#15003
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Zephyr implementation of OpenThreads utilsFlashErasePage platform
function did not disable flash protection before calling `flash_erase`
function. This resulted in an error instead of actual flash erase on
platforms that properly implement flash write protection.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Implement OpenThreads frame pending bit management on top of the Zephyrs
radio driver API. This allows for proper Sleepy End Devices handling
from the parent side.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This makes use of BT_GATT_SERVICE_DEFINE to statically define services
for services that are not required to be dynamically registered.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When importing a pre compiled imported library it is currently
required to perform three steps.
This commit introduces a helper function which allows the
user to import a library with a single function call.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
Existing sntp_request() function has a coarse integer seconds
precision, discarding fractional part as returned by SNTP.
Deprecate it, and instead introduce sntp_query() function which
returns both integer and fractional seconds as a newly introduced
structure sntp_tstamp.
Fixes: #15596
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Previously, a case when poll() call timed out wasn't handled, and
recv() was called unconditionally. In the case of timeout, recv()
itself would hang indefinitely.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If for some reason the DNS resolver callback is not called properly
then make sure that semaphore will not block forever.
Fixes#15197
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This fixes an issue where if timestamp == service_due_timestamp,
we don't call the periodic service. Then the following call to
engine_next_service_timeout_ms() returns 0 because the service
is still due and lwm2m_engine_service() is called again.
This process repeats several times until the value of
k_uptime_get() changes and then the work is finally handled.
Previously, the resolution of k_uptime_get() was in ms. A recent
change to this API defaults Zephyr so that the resolution is
set via CONFIG_SYS_CLOCK_TICKS_PER_SEC (default 100).
This means the value of k_uptime_get() only changes every 10ms.
Reported-by: Github User pieterjanc
Signed-off-by: Michael Scott <mike@foundries.io>
"It's a Trap!" -- Admiral Ackbar
When moving to the BSD-socket APIs, the original thread running LwM2M
periodic services such as observes and lifetime updates, was replaced
with a re-occuring workqueue job. To save the overhead of creating a
new thread, I used the system workqueue for these jobs.
This was a mistake. If these jobs hit a semaphore or wait for some
reason, it cannot be prempted due to the priority of the system work
queue.
Let's instead add this service handling to the thread that we already
use for polling sockets. This also removes a configuration issue where
the system workqueue stack size needed to be increased. This can now
be adjusted via the LWM2M_ENGINE_STACK_SIZE knob.
Directly fixes semaphore usage in the socket-based DNS code.
This was introduced as a bugfix for non-responsive DNS server hanging
the Zephyr device forever. However, this probably fixes randomly
seeming hangs on the device.
Signed-off-by: Michael Scott <mike@foundries.io>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We need all the socket APIs to work from user mode.
tests/net/socket/misc now runs in userspace.
Fixes: #15227
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Rename reserved function names in the subsys/ subdirectory except
for static _mod_pub_set and _mod_unbind functions in bluetooth mesh
cfg_srv.c which clash with the similarly named global functions.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
We are reverting the changes in commit
55b3f05932 given build errors are seen
when fcntl.h is included, as it declares fcntl() as a non-static
function. The same function cannot be declared as both static and
non-static.
Instead, we avoid redefining fcntl() in lib/os/fdtable.c specifically
for case of the SimpleLink family, til we have support for the new
socket_op_vtable.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Some places were still using the old allocator. Using the new one does
not change any behavior. This will help to remove the useless data_len
attribute in net_pkt which legacy allocator was still setting.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
And also to the relevant callbacks.
That parameter is not used anywhere so it is useless.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that legacy - and unrelated - function named net_pkt_get_data has
been removed, we can rename net_pkt_get_data_new relevantly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that legacy functions are removew, let's rename the new functions by
removing the _new suffix.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
TCP context is effectively owned by both application and the stack:
stack may detect that peer closed/aborted connection, but it must
not dispose of the context behind the application back. Likewise,
when application "closes" context, it's not disposed of immediately,
there's yet closing handshake for stack to perform.
This effectively means that TCP contexts have refcount of 2 when
they're created. Without this change, following situation is
possible: peer opens connection, an app get a context (or socket)
via accept, peer sends data, closes connection. An app still holds
a reference to connection, but stack may dispose of context, and
even reuse it for a new connection. Then application holds a reference
to either free, or completely different context.
This situation was very clearly and 100% reproducible when making
Zephyr port of open62541 library, which works in async manner using
select().
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
To save binary size, currently just returns textual name of error
code, e.g. EAI_FAIL -> "EAI_FAIL". Based on real usecases, can be
replaced with user-friendly message later. (Current usecase is to
allow/help to elaborate sockets API by proof-of-concept porting
existing socket apps).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Normally, this bug wasn't apparent as the value is type-casted
to a float32/64 type. However, once we start persisting these
values they need the correct length.
Signed-off-by: Michael Scott <mike@foundries.io>
Let's avoid future compile issues with this macro when passing
in a type-casted value that isn't surrounded by parenthesis.
Signed-off-by: Michael Scott <mike@foundries.io>
Occasionally we see a stack crash in LwM2M. This may have been
due to the swap from net_app APIs to socket-based APIs.
Let's raise the default stack by 1k.
Signed-off-by: Michael Scott <mike@foundries.io>
When a context is closed to a server, we should clean up any
existing observes along with it. Otherwise these will try to fire
afterward.
Signed-off-by: Michael Scott <mike@foundries.io>
We are already in sm_do_registration(), there's no need to check
!sm_is_registered(). Either we are performing a full registration
or a registration update. In both cases, sm_send_registration()
is called.
Signed-off-by: Michael Scott <mike@foundries.io>
If an error is received during registration update, we need to reset
the status so that a full registration is performed. This was
incorrectly being set to ENGINE_REGISTRATION_SENT.
The correct status should be: ENGINE_DO_REGISTRATION
Signed-off-by: Michael Scott <mike@foundries.io>
send() returns -1 upon error and sets errno appropriately. Let's
not bother saving the return code and instead share errno back
to the user.
Signed-off-by: Michael Scott <mike@foundries.io>
The socket-can code expects to have "struct can_frame" from
application when it calls send(). We then have to convert to
"struct zcan_frame" as that is what the driver expects.
Same thing when receiving data. We just convert to
"struct can_frame" and pass that to application.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
subsys/net/lib/lwm2m/Kconfig.ipso is 'source'd within an 'if LWM2M', in
subsys/net/lib/lwm2m/Kconfig, so the 'depends on LWM2M' is redundant.
The 'depends on NET_IPV4' and 'depends on NET_L2_OPENTHREAD' are within
corresponding 'if's in the same file.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This reverts commit 8cb5d083cb53627964ed72fb9fa3fb7a5219739f.
This was breaking tests on master due to missing dependency that is
still being reviewed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is done to conform with how the rest of the socket APIs are
implemented during socket offload. Otherwise link error would
result due to the symbol being redefined in lib/os/fdtable.c.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
These options are oftentimes used when implementing servers, and
thus required to port existing socket apps. These options are also
safe to just ignore, e.g. SO_REUSEADDR has effect only for repeated
recreation of server socket (not an expected usecase for a Zephyr
app), while TCP_NODELAY is effectively the default for Zephyr, as we
don't implement TCP buffering (aka Nagle algorithm).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The LI bits checks is useless as the bitshifted value cannot be
larger than SNTP_LI_MAX (3).
Coverity-CID: 190924
Fixes#13888
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Found via Coverity CID 191001: Control flow issues (NO_EFFECT)
This less-than-zero comparison of an unsigned value is never true:
"put_char(out, '}') < 0U".
Let's fix this check to be less than 1 instead as it should have
been originally.
Signed-off-by: Michael Scott <mike@foundries.io>
To get u8_t value, just right shift the operands are enough.
Fixes#12298
Coverity-CID: 190635
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Poll descriptor was not incremented in poll update function in case it
was reported as not ready. In result, poll could end up processing the
same poll descriptor for every fd requested to monitor.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Rework detection of EOF on a socket, so that it can be detected in a
poll prepare that socket is in in a EOF state and poll can return
immediately.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Unfortunately, most of the dns pack/unpack code is not factorized, and
mdns responder rewrites its own functions to write dns hdr, query,
answer.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Unfortunately, most of the dns pack/unpack code is not factorized, and
llmnr responder rewrites its own functions to write dns hdr, query,
answer.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
So instead of building the net_pkt by itself, dns will pass its message
buffer to net_context_sendto_new(), which in turn will build the net_pkt
relevantly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
dns_write was in the middle of this, let's just move it to a more
relevant place so we logically have macros, then local variables then
functions.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Some of dns_pack.c macros are also used in resolve.c, so let's just put
the macros in dns_pack.h
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Once the fraction value has been assigned a value, we can't move
the exponent any more.
Fixes erroneous values the binary32/64 formats.
Signed-off-by: Michael Scott <mike@foundries.io>
When DTLS client was added to `poll` before/during the handshake, it
could throw errors and in some circumstances (when polling thread was
cooperative and had higher or equal priority to the handshake thread)
could lead to a deadlock in the application.
Prevent that, by blocking on handshake semaphore instead of fifo. Poll
will start using fifo for data poll only after handshake is complete.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Instead of simple bool value, use a semaphore to notify that TLS
handshake is complete. This way, we can monitor this value with k_poll.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Errno value is only significant when `recvfrom` function indicated an
error (by returning -1). We should not depend on it's value if no error
is notified.
As the return value of `recvfrom` is already checked, misused errno
verification can simply be removed.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This function is the opposite of getaddrinfo(), i.e. converts
struct sockaddr into a textual address. Normally (or more
specifically, based on the flags) it would perform reverse DNS
lookup, but current implementation implements only subset of
functionality, by converting to numeric textual address.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
A debug message told "Set EOF flag on pkt %p", but actually printed
net_context instead of net_pkt.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
There are issues using lowercase min and max macros when compiling a C++
application with a third-party toolchain such as GNU ARM Embedded when
using some STL headers i.e. <chrono>.
This is because there are actual C++ functions called min and max
defined in some of the STL headers and these macros interfere with them.
By changing the macros to UPPERCASE, which is consistent with almost all
other pre-processor macros this naming conflict is avoided.
All files that use these macros have been updated.
Signed-off-by: Carlos Stuart <carlosstuart1970@gmail.com>
Per Coverity report, oma_tlv_put() does pointer arithmetic accessing
the data as an array of u8_t. In put_bool() we get a singleton
pointer from the evaluation of: "value != 0 ? 1 : 0" which is
passed to put_s8() which in turn passes it to oma_tlv_put().
To avoid misinterpretation, let's create a temporary s8_t variable
to pass into oma_tlv_put instead.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/12312
Signed-off-by: Michael Scott <mike@foundries.io>
shutdown() itself is described as just marking RX or TX path of a
socket as not available. For the first approximation, we implement
it just as a dummy function, to allow build existing POSIX
applications which use it.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Zero is a special value in the binary32/64 format. It has all zero
bits (sign=0, exponent=0 and fraction=0).
Handle this special case explicitly instead of trying to encode
in binary format which results in an incorrect value of 0.5.
Signed-off-by: Michael Scott <mike@foundries.io>
Initial implementation of IPSO Timer object #3340
Based on: http://www.openmobilealliance.org/tech/profiles/lwm2m/3340.xml
"This IPSO object is used to time events and actions, using patterns
common to industrial timers. A POST to the trigger resource or On/Off
input state change starts the timing operation, and the timer
remaining time shows zero when the operation is complete. The
patterns supported are One-Shot (mode 1), On-Time or Interval
(mode 2), Time delay on pick-up or TDPU (tmode 3), and Time Delay
on Drop-Out or TDDO (mode 4). Mode 0 disables the timer, so the output
follows the input with no delay. A counter is provided to count
occurrences of the timer output changing from 0 to 1. Writing a value
of zero resets the counter. The Digital Input State resource reports
the state of the timer output."
NOTE: Only One-Shot Mode (mode 1) is implemented in this patch.
Signed-off-by: Michael Scott <mike@foundries.io>
During the initial work on LwM2M, the float32/64 code was
basically stubbed out. Float32 sent only whole values and
float64 was completely broken.
Let's clean up the OMA TLV formatting code by moving the float
processing code into a separate file: lwm2m_util.c.
Then using public definitions for binary32 and binary64, let's
fix the processing code to correctly fill the float32_value_t
and float64_value_t types.
Signed-off-by: Michael Scott <mike@foundries.io>
There is no need for appdata pointer: net_pkt's cursor is already at the
right position, i.e. the beginning of the payload right after all IP/TCP
headers.
Also, when reading the actual data, let's use net_pkt_read_new()
relevantly instead of going through the buffer by ourselves.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There is no need for appdata pointer: net_pkt's cursor is already at the
right position, i.e. the beginning of the payload right after all IP/UDP
headers.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This function is only used in sockets, thus making it a private function
of socket library and renaming it relevantly.
Note that sockets should be reviewed at some point to avoid using such
function: zsock_received_cb() already get the ip header and the protocol
header, so it could grab the src addr/port from there. It would be way
more optimized to do so, since net_pkt_get_src_addr is costly as it
parses all over again the ip/protocol headers.
utils unit test is updated and the test of the former
net_pkt_get_src_addr/net_pkt_get_dst_addr are removed.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If a socket is in EOF, it's readable (so client can read() it, get 0
in return, figure it's in EOF, and close it). Without this change, we
had peer-closed sockets leaked (ignore) by poll() and select().
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Use DT_FLASH_ERASE_BLOCK_SIZE prefixed defined instead of
FLASH_ERASE_BLOCK_SIZE as the non-DT version is deprecated.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commits adds a new MQTT transport. The purpose is to be able to
connect to a MQTT broker through a SOCKS5 proxy.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Implemented via Zephyr's net_hostname_get(). As support for that call
is configurable and by default off, while many POSIX applications
assume that hostname is always available, we need a default value
in case CONFIG_NET_HOSTNAME_ENABLE is "n". Initial version of this
patch added that on the level of gethostname() call, but of was
suggested to move that down to net_hostname_get() instead.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
It is possible to set the filter in user application and that
information is passed to the CANBUS device driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is basically a dummy layer that just passes data through.
It is needed so that we can create CANBUS type network interface
to the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This allows user to create a CAN socket and to read/write data
from it. From the user point of view, the BSD socket CAN support
works same way as in Linux.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit adds packet socket support to socket api.
This version supports basic packet socket features.
Protocol family is AF_PACKET, type of socket is
SOCK_RAW and proto type is ETH_P_ALL. The user will
receive every packet (with L2 header) on the wire.
For TX, the subsystem expects that the user has set
all the protocol headers (L2 and L3) properly.
Networking subsystem doesn't verify or alter the headers while
sending or receiving the packets. This version supports packet
socket over Etherent only. Also combination of other family
and protocols doesn't work (i.e. Application can not open
packet-socket and non packet-socket together).
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
A few cases were missed where we weren't cleaning up the existing
connection correctly. This was easily missed because we try and
clean up the connection everywhere.
Instead, let's clean up any existing connection prior to starting
a new one in the do_bootstrap_reg() and do_registration()
functions.
Signed-off-by: Michael Scott <mike@foundries.io>
- Fix enum naming throughout
- Correct next_instance logic
- Move to registration server if no bootstrap server is found
- Fixes to logging
Signed-off-by: Michael Scott <mike@foundries.io>
As the legacy library has been removed, we no longer need to
differentiate betwen MQTT implementations. Therefore align the library
folder name with other libraries and remove the `_sock` suffix.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As we are removing net_app and net_pkt based libraries and
applications, CoAP legacy based libraries and apps are moved
to socket based implementations. So removing legacy CoAP.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If status is 0, both ip_hdr and proto_hdr will own a pointer to the
relevant IP and Protocol headers. In order to know which of ipv4/ipv6
and udp/tcp one will need to use respectively net_pkt_family(pkt) and
net_context_get_ip_proto(context).
Having access to those headers directly, many callbacks will not need
to parse the packet again no get the src/dst addresses or the src/dst
ports. This will be change after this commit.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It's now up to net_context to build the net_pkt and send it.
This will become the default.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The net-app API is removed. Users should use the BSD socket API
for application development.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Previously, the net_app layer handled DNS support as a part of
network initialization. With the move to BSD-socket APIs,
we need to add support for DNS to the LwM2M library.
Signed-off-by: Michael Scott <mike@foundries.io>
This commit resets the firmware status to IDLE after a bad
download attempt. Previously, the firmware object would stay
in an odd state and any further attempts to download firmware
would return an error.
Signed-off-by: Michael Scott <mike@foundries.io>
We can save some resources by removing the periodic service thread
and replacing it by queuing the services to the work queue.
Before (reel_board using BT + DTLS)
Memory region Used Size Region Size %age Used
FLASH: 289464 B 1 MB 27.61%
SRAM: 75620 B 256 KB 28.85%
IDT_LIST: 136 B 2 KB 6.64%
After
Memory region Used Size Region Size %age Used
FLASH: 289576 B 1 MB 27.62%
SRAM: 74596 B 256 KB 28.46%
IDT_LIST: 136 B 2 KB 6.64%
Signed-off-by: Michael Scott <mike@foundries.io>
Now that the security data can be loaded into and used from the
security / server objects, we can add support for LwM2M bootstrap.
This is a mode where initially a connection can be made to a server
which can update several LwM2M (including security and server
data) and then trigger a "bootstrap complete". Once this happens
the client will start it's connection process over but now with
the new information.
Signed-off-by: Michael Scott <mike@foundries.io>
In order to support bootstrap mode, we need to store server data
in the security / server objects. Once the connection to the
bootstrap server is made, it will clear these objects and add
new server connection data.
Signed-off-by: Michael Scott <mike@foundries.io>
For bootstrap support, we need to store connection credentials
in the security object. This way the client can start a connection
at index 0 and after bootstrapping, move to the next connection.
Let's add the needed fields and a config item to set the key length.
Signed-off-by: Michael Scott <mike@foundries.io>
Update the parsing functions for JSON used by the JSON data
formatter and enable it in the LwM2M engine.
Signed-off-by: Michael Scott <mike@foundries.io>
The JSON formatter is currently not enabled for incoming WRITE
operations. To update the code in the formatter and not litter
the input context with extra data, let's allow formatters to
store their own user data.
Signed-off-by: Michael Scott <mike@foundries.io>
net_app contexts save the remote address and we use this during
observe notifications and pending handling. If we move to another
network layer such as sockets, then the remote address becomes
harder to reference. Let's save it as a part of the client
context.
Signed-off-by: Michael Scott <mike@foundries.io>
As part of the migration from net_app APIs to socket APIs, let's
stop referencing the net_pkt fragments throughout the LwM2M library.
Establish a msg_data flat buffer inside lwm2m_message and use that
instead.
NOTE: As a part of this change we remove the COAP_NET_PKT setting.
The COAP library reverts to COAP_SOCK behavior.
This doesn't mean we use sockets in LwM2M (yet), it only means we
use the socket-compatible COAP library which parses flat buffers
instead of net_pkt fragments.
Signed-off-by: Michael Scott <mike@foundries.io>
Currently, this will select the needed configs for LwM2M and net_pkt.
During the migration to socket APIs, the net_pkt selections will change
to socket-based selects.
Signed-off-by: Michael Scott <mike@foundries.io>
The original SNTP client library was designed for the net-app API, for
which it makes sense to have a callback function, which is called
asynchronously when an answer is received.
For the socket based interface, the callback is called just before
sntp_request() returns. It gets the status and the epoch_time in
parameter, however the status is already returned by sntp_request(). It
therefore make sense to replace the callback function by a pointer to
epoch_time.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The relationship between lwm2m_engine_context and lwm2m_message
has always been a tenuous one. Let's merge the 2 structures
into lwm2m_message and remove all of the extra stack variables.
This change increases SRAM usage slightly due to the
addition of the context structures to the multiple lwm2m_messages.
However, the way lwm2m_engine_context was being used off the stack
was probably creating hard to debug issues in the longterm.
Also, having all of the structures in 1 place makes sharing them
much easier later.
Signed-off-by: Michael Scott <mike@foundries.io>
Reported by Github user himanshujha199640 using coccinelle:
subsys/net/lib/lwm2m/lwm2m_obj_device.c:172:5-16:
WARNING: Unsigned expression compared with zero.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/11135
Signed-off-by: Michael Scott <mike@foundries.io>
CONFIG_NET_CONTEXT_NET_PKT_POOL is used by Zephyr's TCP stack as
a way of keeping the original packet data when compression and
other l2 specific actions make the data unusable for retries.
LwM2M uses UDP and this option was never used.
Signed-off-by: Michael Scott <mike@foundries.io>
As networking libraries and protocols are moving to socket
based implementation, reworked SNTP client library to use sockets.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The old and deprecated net-app based MQTT library is removed.
See the BSD socket based MQTT library for a replacement.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The implementation code itself should not rely on plain POSIX names
and use zsock_ and ZSOCK_ prefixed versions of symbols.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The old legacy APIs use net-app library and as that is being
removed, then the dependencies need to be removed also.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
struct timeval is per POSIX defined in sys/time.h, but that also
allowed to pull sys/select.h (and indeed, it does with native_posix),
which then starts to conflict with out select implementation (if
NET_SOCKETS_POSIX_NAMES is defined, and many samples/tests have it).
So, for now follow the existing route of duplicating all definitions
needed by our code in namespaced manner. Things like struct timeval
usage will need to be revisited later, when we'll want socket
subsystem to work with POSIX subsystem, but that's a separate deep
matter.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
It's implemented on top of poll() anyway, and the current
implementation of fd_set uses array of fd's underlyingly, which
leads to O(n) complexity for FD_SET() and friends.
The purpose of select() implementation is to allow to perform
proof-of-concept port of 3rd-party code to Zephyr quickly. For
efficiency, poll() should be used instead.
Fixes: #11333
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
net_buf_linearize() used to clear the contents of output buffer,
just to fill it with data as the next step. The only effect that
would have is if less data was written to the output buffer. But
it's not reliable for a caller to rely on net_buf_linearize() for
that, instead callers should take care to handle any conditions
like that themselves. For example, a caller which wants to process
the data as zero-terminated string, must reserve a byte for it
in the output buffer explicitly (and set it to zero).
The only in-tree user which relied on clearing output buffer was
wncm14a2a.c. But either had buffer sizes calculated very precisely
to always accommodate extra trailing zero byte (without providing
code comments about this), or arguably could suffer from buffer
overruns (at least if data received from a modem was invalid and
filled up all destination buffer, leaving no space for trailing
zero).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
net_frag_linearize() is just a wrapper for net_buf_linearize(). As
the latter was refactored to never return error, and instead just
return actual copied length, update the former and its usages too.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Currently OpenThread commands have to be prefixed in the shell by "ot
cmd", for example "ot cmd state". With the new shell, it is possible to
remove one subcommand level and change it to "ot state".
At the same time validate the number of arguments using
SHELL_CMD_ARG_REGISTER and improve the help message.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Following the introduction of the new shell, the OpenThread shell
wrapper is not well integrated. It outputs the answer to a command using
printk(), which is not necessarily using the same device than the shell
if "zephyr,console" does not match "zephyr,shell-uart".
OpenThread calls the otConsoleOutputCallback() function to output the
answer to the shell. It can provide a callback argument, but defined
when OpenThread is initialized, not when the command is submitted.
Workaround that by taking a copy of the shell argument in a static
variable and use it for the call to shell_fprintf(). It is not perfect
if two or more shells issue concurrent commands, but is already an
improvement compared to printk().
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When walking through the coap resources in coap_handle_request, return
-EPERM if a resource exists but does not have the request method. This
allows the caller to catch the error and return a 4.05 message.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fix misspellings in documentation (.rst, Kconfig help text, and .h
doxygen API comments), missed during regular reviews.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Update zephyr integration of openthread to latest api as of 2018-12-17:
2a75d30684
Both echo_server and echo_client compile and are operational.
Signed-off-by: Martin Turon <mturon@google.com>
Currently there is a mixed approach in prefixes from mbedTLS
configuration (MBEDTLS_ and TLS_). The latter was used in generic config
file and could bring up confusion that it can only be used with TLS
subsystem. Hence unify the approach to MBEDTLS_ prefix to avoid such
confusion.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As extend fdtable usage to more cases, there regularly arises a need
to forward ioctl/fcntl arguments to another ioctl vmethod, which is
complicated because it defined as taking variadic arguments. The only
portable solution is to convert variadic arguments to va_list at the
first point of entry from client code, and then pass va_list around.
To facilitate calling ioctl with variadic arguments from system code,
z_fdtable_call_ioctl() helper function is added.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This commit reworks socket poll implementation to support multiple
socket implementations.
To achieve that, two ioctl poll helper requests were added:
ZFD_IOCTL_POLL_PREPARE and ZFD_IOCTL_POLL_UPDATE. The poll
implementation calls ioctl with these requests for each socket
requested in the fds table.
The first request is responsible for preparing k_poll_event objects
for specific socket. It can request to skip waiting in k_poll by
returning EALREADY through errno.
The latter request is responsible for processing outcome of k_poll for
each socket. It can request to retry the k_poll by returning EAGAIN
through errno.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Implement extended socket vtable for TLS sockets, therefore allowing to
integrate the implementation with socket subsystem.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit extends socket vtable, allowing to redirect socket calls to
alternate implementations (e.g. TLS sockets).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Remove network specific default and max log level setting
and start to use the zephyr logging values for those.
Remove LOG_MODULE_REGISTER() from net_core.h and place the
calls into .c files. This is done in order to avoid weird
compiler errors in some cases and to make the code look similar
as other subsystems.
Fixes#11343Fixes#11659
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Removed printing command help from help handler. It is now
realized by the shell engine. This change saves a lot of flash
but still allows to print help in command handler with function
shell_help_print.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Removing help "options" from shell API.
Currently SHELL_OPT macro is not used by users. What is more
commit: a89690d10f ignores possible options created in
command handler by the user. As a result they are not printed
in help message.
Second, currntly implemented "options" in command handlers options are
implemented without SHELL_OPT macro.
And last but not least this change will allow to implement
help handler in a way that user will not need to think about calling
functions printing help in a command handler.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
MQTT packet_length_encode function accepts NULL buf argument, therefore
it cannot be dereferenced without a check.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
mqtt_connect was not releasing mutex after successfull connection.
Reworked the code to have a single exit path with mutex unlock.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Remove an unnecessary local variable to store the
return value, instead return directly thereby saving
few bits of memory.
Found using Coccinelle.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Remove an unnecessary local variable to store the
return value, instead return directly thereby saving
few bits of memory.
Found using Coccinelle.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
net_udp_get_hdr() function returns NULL on failure. Therefore
handle its return value to avoid potential NULL dereference.
Fixes#11485
Coverity-CID: 189738
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
The _net_app_sprint_ipaddr() was calling log_strdup() when
creating the debug print string. This is not correct as
the log_strdup() can only be used when calling the logging macro
to print strings.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Implements setsockopt() for the socket offload driver
to process the TLS tags sent in via the Zephyr setsockopt() API,
when CONFIG_NET_SOCKETS_SOCKOPT_TLS is chosen.
For each tag, the credential filenames are retrieved and
set via SimpleLink's sl_SetSockOpt() API.
Also, creates a new KConfig option for TLS_CREDENTIAL_FILENAMES.
This new option is used by apps/protocols to add TLS credentials
via filenames referring to the actual content stored on a secure
file system or flash.
Handles the IPPROTO_TLS_* socket protocol families in the
socket() offloaded API.
This was validated on the cc3220sf_launchxl with the http_get sockets
sample, with the globalsign_r2.der file loaded to secure flash via
the TI Uniflash tool, and using the TI Catalog of known good
root CA's.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Two separate folders and Kconfig options causing confusion on
CoAP and CoAP_SOCK implementations. This patch simplifies it.
Current CoAP Kconfig option moved to COAP_NET_PKT.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When resending data, we need to always check pending status first.
If the pending check returns an "expired" status, avoid sending the
data to L2 network driver entirely.
This change fixes a use after free issue, where the L2 network driver
was still handling a packet that was expired out from under it when
the pending status was checked.
Signed-off-by: Michael Scott <mike@foundries.io>
During firmware transmit timeout, we rely on the pending packet data to
reconstitute the token and token length. At this point the pending
structure may be cleared out due to multiple retries. To avoid getting
a zero token, let's use the token data from the original msg structure
instead.
Signed-off-by: Michael Scott <mike@foundries.io>
We are using msg->cpkt.pkt as the net_pkt pointer in the call to
net_app_send_pkt(). Let's keep the code clean and not expose
ourselves to "out of order" issues, by also using msg->cpkt.pkt
in the error handling unref call.
Signed-off-by: Michael Scott <mike@foundries.io>
During the retransmit cycle we take ref on the outgoing packet,
only to immediately unref it. Originally, this was to make sure
the net_context handling didn't get rid of the packet when
sendto() is called. But after checking, the ref counter is never
in danger of going to 0 at this point in the code, so the
added ref handling is useless.
Signed-off-by: Michael Scott <mike@foundries.io>
Add some extra space to the color resource buffer, to allow more
exotic and application-specific color spaces.
Signed-off-by: Marti Bolivar <marti@foundries.io>
File descriptor I freed automagically when using POSIX subsystem's
close() function, but any subsys-adhoc functions like zsock_close()
should do that explicitly.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Add new, socket based MQTT implementation, based on MQTT from Nordic
nRF5 SDK, introducing the following features:
* transport independent MQTT logic, with support for multiple transports
* support for multiple MQTT versions (3.1.0 and 3.1.1 supported)
* single event handler - no need to keep callback array in RAM
* automatic send of Ping Requests, for connection keep-alive
* message/event parameters wrapped into strucutres - easier extension
for future MQTT versions
* no separate thread needed to run MQTT - application only needs to call
mqtt_input and mqtt_live periodically
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Rename existing headers and sybols to mqtt_legacy, to allow new
implementation to keep old config and header names.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
With FD table introduction, net_context can no longer be reached by
typecasting socket descriptor. Instead, file descriptor API have to be
used.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
ztls_setsockopt and ztls_getsockopt returned error codes instead of
setting errno in particular cases. This commit fixes it.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
These changes were obtained by running a script created by
Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following
specification:
1. Read the contents of all dts_fixup.h files in Zephyr
2. Check the left-hand side of the #define macros (i.e. the X in
#define X Y)
3. Check if that name is also the name of a Kconfig option
3.a If it is, then do nothing
3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it
has neither of these two prefixes
4. Replace the use of the changed #define in the code itself
(.c, .h, .ld)
Additionally, some tweaks had to be added to this script to catch some
of the macros used in the code in a parameterized form, e.g.:
- CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS
- CONFIG_UART_##idx##_TX_PIN
- I2C_SBCON_##_num##_BASE_ADDR
and to prevent adding DT_ prefix to the following symbols:
- FLASH_START
- FLASH_SIZE
- SRAM_START
- SRAM_SIZE
- _ROM_ADDR
- _ROM_SIZE
- _RAM_ADDR
- _RAM_SIZE
which are surprisingly also defined in some dts_fixup.h files.
Finally, some manual corrections had to be done as well:
- name##_IRQ -> DT_##name##_IRQ in uart_stm32.c
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Couple of findings which were revealed after changing
LOG_MODULE_REGISTER macro:
- missing semicolons after LOG_MODULE_REGISTER()
- missing LOG_LEVEL defines
- other
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
FD method tables contain function pointers, and thus should be
const and reside in ROM. This patch fixes all cases of FD vtable
definitions: for POSIX FS API and for sockets.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Previously the "socket file descriptors" were just net_context
pointers cast to int. For full POSIX compatibility and support
of generic operations line read/write/close/fcntl/ioctl, the
real file descriptors should be supported, as implemented by
fdtable mini-subsys.
Socket implementation already has userspace vs flatspace dichotomy,
and adding to that ptr-fds vs real-fds dichotomy (4 possible cases)
is just too cumbersome. So, switch sockets to real fd's regardless
if full POSIX subsystem is enabled or not.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Unify the function naming for various network checking functions.
For example:
net_is_ipv6_addr_loopback() -> net_ipv6_is_addr_loopback()
net_is_my_ipv6_maddr() -> net_ipv6_is_my_maddr()
etc.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fixes following warning:
...
subsys/net/lib/dns/llmnr_responder.c:24:0:
subsys/net/lib/dns/llmnr_responder.c: In function ‘recv_cb’:
include/net/net_pkt.h:1203:9: warning: ‘addr’ may be used uninitialized
in this function [-Wmaybe-uninitialized]
return net_pkt_append(pkt, len, data, timeout) == len;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
subsys/net/lib/dns/llmnr_responder.c:306:14: note: ‘addr’ was declared
here
const u8_t *addr;
^~~~
...
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fixes warning:
warning: ‘ipv6’ defined but not used [-Wunused-variable]
static struct net_context *ipv6;
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
CoAP library is migrated to support over socket based
applications or other higher layer protocols. Most of the
API's and functionality is kept as it is except few changes.
net_pkt/net_buf is removed from CoAP library. Now it expects
a pre-allocated flat buffer and length. If there is not enough
space to append any data, library simply returns an error.
It's user's responsibility to allocate and free memory.
One change in functionality is, earlier coap_pending_clear()
used to clear the memory, but now it's user's responsibility
to free the memory.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Current TLS socket implementation assumed that PSK ID stored in
credential manager is NULL terminated. It's actually better to store
only the string content, as the string length is stored as well. This
approach is less confusing, when a user is not operating on C strings
but on a non-NULL terminated byte array.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When DBG level for CONFIG_LWM2M_LOG_LEVEL is disabled, a compiler
warning is generated:
In file included from include/logging/log.h:11:0,
from subsys/net/lib/lwm2m/lwm2m_engine.c:28:
subsys/net/lib/lwm2m/lwm2m_engine.c: In function ‘engine_add_observer’:
subsys/net/lib/lwm2m/lwm2m_engine.c:558:3: warning: implicit
declaration of function ‘sprint_token’
[-Wimplicit-function-declaration]
sprint_token(token, tkl), lwm2m_sprint_ip_addr(addr));
^
Let's remove the #if guards around sprint_token() and let
the Linker remove it when not needed.
Signed-off-by: Michael Scott <mike@foundries.io>
Make sure that we define and declare the _net_app_register() and
_net_app_unregister() functions properly if net_app logging level
is set to debug.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This flag is an indication to the timer driver that the OS doesn't
care about rollover conditions of the tick count while idling, so the
system doesn't need to wake up once per counter flip[1]. Obviously in
that circumstance values returned from k_uptime_get_32() are going to
be wrong, so the implementation had an assert to check for misuse.
But no one understood that from the docs, so the only place these APIs
were used in practice were as "guards" around code that needed to call
k_uptime_get_32(), even though that's 100% wrong per docs!
Clarify the docs. Remove the incorrect guards. Change the flag to
initialize to true so that uptime isn't broken-by-default in tickless
mode. Also move the implemenations of the functions out of the
header, as there's no good reason for these to need to be inlined.
[1] Which can be significant. A 100MHz ARM using the 24 bit SysTick
counter rolls over at about 6 Hz, and if it had to come out of
idle at that rate it would be a significant power issue that would
swamp the gains from tickless. Obviously systems with slow
counters like nRF or 64 bit ones like RISC-V or x86's TSC aren't
as affected.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Also, defines one LOG_MODULE_NAME for the simplelink WiFi driver, and
uses the same name for all files in this driver (module).
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Placing it at sys/fcntl.h was due to mimicking internal newlib's
layout, but what we need is this file at the standard location,
for reuse.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This commit fixes the issue that if a thread is waiting on recv for
data and the user closes the socket, the waiting thread is not
unblocked.
Signed-off-by: Léonard Bise <leonard.bise@gmail.com>
Adding spaces around "=" when definining Kconfig template so
that is more consistent with overall style of these template
variables.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the debugging print calls are async, all the strings that might
be overwritten must use log_strdup() which will create a copy
of the printable string.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The code was trying to print peer IP address string but that
pointer could contain garbage. There is actually no need to print
anything in this case, the error code return is enough.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In coap_option_value_to_int function, when coap option length is 4,
option->value[3] should be shifted by 0 rather than option->value[2].
This doesn't affect the behavior of function but needs to be fixed.
In coap_append_option_int function, when the value is between 0xffff
and 0xffffff(when option length is 3), bit shift operation is wrong.
For example, if the value is 0xABCDEF, by sys_put_be16(val, data)
data[0]=0xCD, data[1]=0xEF, by val >> 16, data[2]=0xAB. So the result
becomes 0xCDEFAB not 0xABCDEF. So, to sys_put_be16 function hand
&data[1] over instead of handing data over and val >> 16 needs to be
set to data[0], not data[2].
Signed-off-by: Taehwa Kang <hegrecomm@gmail.com>
New shell implementation is on the way. For now old one and all
references are kept to be gradually replaced by new shell.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
There is now a proper function to select the right source IPv4
address when sending a mDNS packet so use it instead of selecting
the address directly from network interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When no certificate-based ciphersuites are used, mbedTLS compiles out
hostname field and associated functions from its SSL context. This
resulted in compilation error when only PSK-based ciphersuites were
configured.
This commit resolves the issue by compiling-out hostname-related code
from secure sockets implementation on the same basis as mbedTLS does.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The return of memset is never checked. This patch explicitly ignore
the return to avoid MISRA-C violations.
The only directory excluded directory was ext/* since it contains
only imported code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The result of both printk and vprintk are not used in any place.
MISRA-C says that the return of every non void function must be
checked.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
sockets_tls subsystem uses entropy driver, yet it does not include
entropy header. This commit fixes this.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This patch enables BSD socket offload to a dedicated
TCP/IP offload engine.
This provides a simpler, more direct mechanism than going
through NET_OFFLOAD (zsock -> net_context -> socket conversions)
for those devices which provide complete TCP/IP offload at the
BSD socket level, and whose use cases do not require
IP routing between multiple network interfaces.
To use, configure CONFIG_NET_SOCKETS_OFFLOAD=y, and register
socket_offload_ops with this module.
Fixes#3706
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Using sizeof() is a common best practice in C, because it allows to
adjust size in one place instead of many.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
For ease of maintenance, let's swap the reader/writer initialization
syntax to:
.put_begin = put_begin,
.put_end = put_end,
...
This way we only assign used fields and adding new ones later is
less error prone.
Signed-off-by: Michael Scott <mike@foundries.io>
We set "insert" to true when the value is already in the buffer, but
we need to insert a TLV to denote things like RESOURCE_INSTANCE or
OBJECT_INSTANCE. In this case, let's not re-add the value.
Signed-off-by: Michael Scott <mike@foundries.io>
Let's implement put_begin/end_oi functions in the TLV formatter
so to mark the boundry of an object instance when more than 1
object instance is returned.
Fixes https://github.com/zephyrproject-rtos/zephyr/issues/9470
Signed-off-by: Michael Scott <mike@foundries.io>
In order to re-use the put_begin_ri / put_end_ri logic, let's create
generic functions for them: put_begin_tlv and put_end_tlv
Signed-off-by: Michael Scott <mike@foundries.io>
Currently, we only save the resource id of the incoming path setting.
In the future, we will need to change other values in order to process
multi-instance READ operations.
Let's save and restore the entire path only at the beginning and end
of processing.
Signed-off-by: Michael Scott <mike@foundries.io>
Data formatters may need to process data at the beginning and end of
each object instance and/or resource. Currently, they can only add
processing at the beginning and end of resource instances.
Let's establish put_begin/end_oi (object instance) and put_begin/end_r
(resource) API functions that data formatters can use for this purpose.
Signed-off-by: Michael Scott <mike@foundries.io>
Optimize the resource processing loop to avoid extra
assignments before checking if we need to process the
actual resource.
Signed-off-by: Michael Scott <mike@foundries.io>
When reading multiple instances, the base name value should not
include an object instance id. The object instance id is added
to the individual resource name values.
Accomplish this by saving the original path level and adjusting
the (base) name where needed.
Signed-off-by: Michael Scott <mike@foundries.io>
The put_begin / put_end calls are to be used at the very beginning
and end of processing a READ op. Let's correct that logic.
Signed-off-by: Michael Scott <mike@foundries.io>
Now that formatters use their own private data to hold state,
let's remove the old member variables from lwm2m_output_context
which are now unused.
Signed-off-by: Michael Scott <mike@foundries.io>
Data formatters have various private state variables which are
currently located in the output context structure. Let's add
a place where data formatters can store a pointer to their
private data so that as we add more formatters the output
context doesn't get cluttered up.
Signed-off-by: Michael Scott <mike@foundries.io>
The plain-text format only supports READ op for a specific resource.
In all other cases return NOT_ALLOWED.
Signed-off-by: Michael Scott <mike@foundries.io>
Data formatters are becoming too complex for a simple do_read_op()
function to handle all in one place. Also, more data formatters are
going to be added for LwM2M v1.1 support in the future.
In order for data formatters to perform internal setup or deny
invalid requests (specific to the formatter's logic), let's
establish do_read_op_* functions in each formatter.
Once the internal processing is done, they can call back into the
more generic lwm2m_perform_read_op function.
Signed-off-by: Michael Scott <mike@foundries.io>
Let's correct the starting logic in do_read_op() to not assume
a default value of 0 will be present for the first object, when
reading multiple objects.
Signed-off-by: Michael Scott <mike@foundries.io>
The object instance list isn't sorted by object instance id. Let's
simplify this and fix the logic in lwm2m_next_engine_obj_inst() to make
sure that we always get the NEXT object instance by value of
obj_inst_id, not just the next object instance in the list.
NOTE: This change removes the "last" object instance pointer from the
parameters of lwm2m_next_engine_obj_inst(). Some of the logic to return
a NULL value for the end of the list has to be moved back into
do_read_op().
Signed-off-by: Michael Scott <mike@foundries.io>
Remove over-complicated match_type logic in do_read_op(). Replace
MATCH_* checks with actual path->level values.
Signed-off-by: Michael Scott <mike@foundries.io>
This is similar to change which was done in 21f31e90ec, unfortunately
this case was missed.
Fixes: #9032
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The peers were not informed about DTLS connection close because
we removed DTLS context. The fix is to notify peers before we
remove the DTLS connection.
Fixes#8605
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When processing an observe request we fail to check whether a
resource has the read permission set. Let's check and if it
doesn't return -EPERM.
NOTE: Also do diligence and return -ENOENT when an object field
cannot be found while looking for the permission.
Fixes https://github.com/zephyrproject-rtos/zephyr/issues/8286
Signed-off-by: Michael Scott <mike@foundries.io>
Due to a change in the company name, the LwM2M copyrights need
to be changed from "Open Source Foundries Limited" ->
"Foundries.io".
Signed-off-by: Michael Scott <mike@foundries.io>
The previous code "optimized" and called both net_context_accept()
and net_context_recv() blindly to reset the corresponding callbacks.
But this leads to "wrong state" logging if debugging is enabled, so
clean that up.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This commit contains several fixes for DTLS implementation, proposed in
a post-merge review of #9338.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Consistently use
config FOO
bool/int/hex/string "Prompt text"
instead of
config FOO
bool/int/hex/string
prompt "Prompt text"
(...and a bunch of other variations that e.g. swapped the order of the
type and the 'prompt', or put other properties between them).
The shorthand is fully equivalent to using 'prompt'. It saves lines and
avoids tricking people into thinking there is some semantic difference.
Most of the grunt work was done by a modified version of
https://unix.stackexchange.com/questions/26284/how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some
of the rarer variations had to be converted manually.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
There was one extra byte sent in last chunk which caused
this error to be printed by curl
* Illegal or missing hexadecimal sequence in chunked-encoding
* stopped the pause stream!
* Closing connection 0
curl: (56) Illegal or missing hexadecimal sequence in chunked-encoding
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of waiting forever for a network buffer, have a timeout
when allocating net_buf. This way we cannot left hanging for a
long time waiting for a buffer and possibly deadlock the system.
This commit adds checks to L2 and network support libraries.
Fixes#7571
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
There have a funtion mqtt_rx_unsuback defined but not used.
So add it into mqtt_parser and fix the missing case.
Fixes#8431
Signed-off-by: Xuan Ze <119524428@qq.com>
This finishes refactor of splitting off net_config library name from
net_app library, started in c60df1311, c89a06dbc. This commit makes
sure that Kconfig options are prefixed with CONFIG_NET_CONFIG_
instead of CONFIG_NET_APP_, and propagates these changes thru the
app configs in the tree.
Also, minor dependency, etc. tweaks are made.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Add system calls for the zsock implementations of socket,
close, bind, connect, listen, accept, sendto, recvfrom,
fcntl, poll, inet_pton, and getaddrinfo.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Originally EFAULT was used to indicate NULL pointer error in TLS option
set/get functions. EINVAL was suggested to be more apropriate error code
for this case, hence replace it.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Introduce non-blocking DTLS handshake, used during recv function call.
This prevents from blocking while waiting for initial handshake packet
on non-blocking sockets during receive.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Make TLS poll function verify if decrypted data is available after
socket has notified activity with POLLIN flag. This prevents from giving
false notifications in case data was received on socket but was consumed
by mbedTLS.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Specify timeout value for mbedtls_ssl_read function for DTLS servers.
Adding this can prevent TLS context lockup in case blocking recv is used
and peer has shut down DTLS connection without closing it gracefully.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add support for DTLS recv/recvfrom function.
For DTLS client, recv function requires to have an already established
DTLS connection.
For DTLS servers, this function will try to establish DTLS connection
before receiving data. In case that DTLS handshake fails, recv function
will silently retry.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add support for DTLS send/sendto function.
For DTLS clients, send function will try to establish DTLS connection
before sending data. If DTLS handshake fails, it will return an error.
For DTLS servers, send function requires to have DTLS connection already
established.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
DTLS handshake can return MBEDTLS_ERR_SSL_HELLO_VERIFY_REQUIRED, which
indicate that TLS session context should be reset.
Also, store information whether TLS connection has beed established.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add binary IO functions for DTLS connections.
dtls_rx function is more complex than it's TLS counterpart due to fact,
that DTLS does not allow blocking operation for this function. A simple
timeout mechanism was implmented basing on the zsock_poll function.
This function also verifies peer address. As currently only a single
DTLS connection is supported on a socket, if a DTLS connection is
established, and we receive datagram from different peer, it is silently
dropped.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Functions for checking flags set on sockets are needed by TLS sockets as
well, therefore extract them to a separate header file to avoid code
duplication.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add write-only socket option to set role for DTLS connection. This
option is irrelevant for TLS connections.
This options accepts and integer with a TLS role, compatible with
mbedTLS values:
0 - client,
1 - server.
By default, DTLS will assume client role.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Up until now, Zephyr has patched Kconfig to use the last 'default' with
a satisfied condition, instead of the first one. I'm not sure why the
patch was added (it predates Kconfiglib), but I suspect it's related to
Kconfig.defconfig files.
There are at least three problems with the patch:
1. It's inconsistent with how Kconfig works in other projects, which
might confuse newcomers.
2. Due to oversights, earlier 'range' properties are still preferred,
as well as earlier 'default' properties on choices.
In addition to being inconsistent, this makes it impossible to
override 'range' properties and choice 'default' properties if the
base definition of the symbol/choice already has 'range'/'default'
properties.
I've seen errors caused by the inconsistency, and I suspect there
are more.
3. A fork of Kconfiglib that adds the patch needs to be maintained.
Get rid of the patch and go back to standard Kconfig behavior, as
follows:
1. Include the Kconfig.defconfig files first instead of last in
Kconfig.zephyr.
2. Include boards/Kconfig and arch/<arch>/Kconfig first instead of
last in arch/Kconfig.
3. Include arch/<arch>/soc/*/Kconfig first instead of last in
arch/<arch>/Kconfig.
4. Swap a few other 'source's to preserve behavior for some scattered
symbols with multiple definitions.
Swap 'source's in some no-op cases too, where it might match the
intent.
5. Reverse the defaults on symbol definitions that have more than one
default.
Skip defaults that are mutually exclusive, e.g. where each default
has an 'if <some board>' condition. They are already safe.
6. Remove the prefer-later-defaults patch from Kconfiglib.
Testing was done with a Python script that lists all Kconfig
symbols/choices with multiple defaults, along with a whitelist of fixed
symbols. The script also verifies that there are no "unreachable"
defaults hidden by defaults without conditions
As an additional test, zephyr/.config was generated before and after the
change for several samples and checked to be identical (after sorting).
This commit includes some default-related cleanups as well:
- Simplify some symbol definitions, e.g. where a default has 'if FOO'
when the symbol already has 'depends on FOO'.
- Remove some redundant 'default ""' for string symbols. This is the
implicit default.
Piggyback fixes for swapped ranges on BT_L2CAP_RX_MTU and
BT_L2CAP_TX_MTU (caused by confusing inconsistency).
Piggyback some fixes for style nits too, e.g. unindented help texts.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The LwM2M engine will cleanup the net_app_ctx if there are
errors during initialization. The clean up calls here in
RD client are duplicated.
Signed-off-by: Michael Scott <mike@foundries.io>
If a disconnection callback was registered, it is not called
as the check done in net_app is reversed. The disconnection callback
is not called if there are any inactive contexts.
The check should be on any active context.
Signed-off-by: Philémon Jaermann <p.jaermann@gmail.com>
- Remove redundant 'n' defaults. 'n' is the default value for bool
symbols.
This makes the auto-generated documentation clearer as well: You get
"implicitly defaults to n" instead of
"- n if <propagated dependencies>".
- Shorten
<type>
prompt "foo"
to
<type> "foo"
This works for all types, not just bool.
- Various formatting nits.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add write only TLS secure option to set peer verification level for
TLS connection.
This option accepts an integer with a peer verification
level, compatible with mbedtls values (0 - none, 1 - optional, 2 -
required.
By default, socket mimics mebdTLS behavior - (none for server, required
for client).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add TLS secure socket option to read a ciphersuite chosen during TLS
handshake. Might be useful during development.
This is a read-only option that returns an integer containing an
IANA assigned ciphersuite identifier of chosen ciphersuite.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add TLS secure socket option that enables to narrow list of ciphersuites
available for TLS connection.
This option accepts an array of integers with IANA assigned ciphersuite
identifiers and returns such.
By default, every statically configured ciphersuite is available for a
socket and getsockopt returns an array of these.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add write-only TLS secure socket option to set hostname.
This option accepts a string containing the hostname. May be NULL, to
disable hostname verification.
By default, an empty string is set as a hostname for TLS clients,
to enforce hostname verification in mbedTLS.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add TLS secure socket option to select TLS credentials to use.
This option accepts and returns an array of sec_tag_t that indicate
which TLS credentials should be used with specific socket.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add TLS credential management subsystem that enables to register TLS
credentials in the system. Once specific credentials are registered in
the system, they will be available for TLS secure sockets to use.
To use a TLS credential with a socket, the following steps have to be
taken:
1. TLS credential has to be registered in a system-wide pool, using the
API provided in "net/tls_credentials.h" header file.
2. TLS credential (and other TLS parameters) should be set on a socket
using setsockopt().
Note, that there is no need to repeat step 1 for different sockets using
the same credentials. Once TLS credential is registered in the system,
it can be used with mulitple sockets, as long as it's not deleted.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Move struct members around in networking code so that we avoid
unnecessary holes inside structs. No functionality changes by
this commit.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
CONFIG_DNS_RESOLVER is the master switch for DNS resolution support,
for both native and socket APIs. Avoid confusing link errors by
compiling out both dns_resolve_name() and getaddrinfo() if that
option is not enabled.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Current implementation does not handle large extension headers
(e.g HBHO). Which resulted network stack crashes or due to
misinterpretation of lengths network packets are dropped. Also
caused issues while preparing IPv6 packet (e.g. large HBHO header
with IPv6 fragmentation support).
Issues fixed and provided more unit tests.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
During transfer of object data via OMA TLV format, we can
encounter resources which are optional or not handled in base
LwM2M engine. When these resources cannot be handled let's
read past them and continue on.
Signed-off-by: Michael Scott <mike@foundries.io>
Don't use hard-coded value of 4 for passing the # of options to
coap_find_options() in handle_request(). This can easily get
out of sync.
Signed-off-by: Michael Scott <mike@foundries.io>
LwM2M engine now supports optional resources that may need to be
setup or torn down in user-based code during object instance
creation / deletion.
Let's provide callbacks that can be used for this purpose.
Signed-off-by: Michael Scott <mike@foundries.io>
Let's rename lwm2m_engine_exec_cb_t to lwm2m_engine_user_cb_t so that
future user-code callbacks can make use of the same definition.
Signed-off-by: Michael Scott <mike@foundries.io>
Initial implementation of poll() was more of a proof of concept, so
was coded with a single-thread application in mind. As we move to
sockets as the main networking API, make it possible to use poll()
from different threads.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Implement socket poll function for TLS socket. In addition to regular
poll checks, we have to check if there is some decrypted data pending on
mbedTLS.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add entropy source for mbedTLS. If no entropy driver is available, use
non-secure, software entropy source.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add tls_context structure that stored data required by TLS socket
implementation. This structure is allocated from global pool during
socket creation and freed during socket closure.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add switch to a socket layer that will enable switching socket API to
TLS secure sockets. At this point there is no secure sockets
implementation, so secure socket calls redirect to regular socket calls.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Remove some 'default ""' properties on string symbols too.
Also make definitions more consistent by converting some
config FOO
<type>
prompt "foo"
definitions to a shorter form:
config FOO
<type> "foo"
This shorthand works for int/hex/string symbols too, not just for bool
symbols.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
If we use newlib the isdigit (and other similar functions) return an
error as char can possibly be viewed as signed:
usr/include/ctype.h:57:54: error: array subscript has type ‘char’ [-Werror=char-subscripts]
#define __ctype_lookup(__c) ((__ctype_ptr__+sizeof(""[__c]))[(int)(__c)])
Explicity cast to unsigned char so we deal with both this warning and
possible warning when -Wpointer-sign is enabled.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Split out definition of net_app_init() and its parameter flags from
net_app.h header to new net_config.h header. As we do this, rename
the function to net_config_init() and flags to NET_CONFIG_NEED_*.
This is a second step in splitting out network configuration API
out of net_app API, started in the c60df1311 commit.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This allows zephyr to listen LLMNR DNS queries sent by Windows
and respond to them. See RFC 4795 for details.
The feature requires that hostname is set properly to the
zephyr device and LLMNR is configured properly.
Typically following config options are enough for this support:
CONFIG_NET_HOSTNAME_ENABLE=y
CONFIG_NET_HOSTNAME="zephyr-device"
CONFIG_DNS_RESOLVER=y
CONFIG_LLMNR_RESPONDER=y
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This implements LLMNR client from RFC 4795. This means that caller
is able to resolve DNS resource records using multicast DNS.
The LLMNR is used in Windows networks.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Due to the fact that cmake doesn't allow to build empty "library"
(which would be the case when neither CONFIG_NET_APP_SERVER nor
CONFIG_NET_APP_CLIENT is defined).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
net_app library consisted of 2 disjoint parts: a) library to
setup/configure networking on the application startup; b) library
to setup client and server connections.
As the configuration library is universally useful and is a generic
Zephyr networking component, split it out to a seperate top-level
networking library under net/lib/config/.
Fixes: #7658
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
When the priority of the LwM2M engine was lowered, it causes an
occasional registration update to fall outside of the registration
lifetime. This shows up as the following error:
Failed with code 4.4. Retrying registration
Let's try and retry a bit earlier to account for the priority
change.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
The ARRAY_SIZE() utility macro will actually test the parameter types,
and ensure that it is only called with arrays, and not arrays decayed
to pointers.
Changes were performed with a simple Coccinelle script.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
A typo in update_attrs() was setting every observer to a PMIN of 0.
This meant we could send observer data as often as the process was
called. This is out of spec as the default minimum is 10 seconds.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
The LwM2M engine thread is used for various periodic triggers.
None of these are in a critical path that requires super sensitive
timing and the current K_PRIO_COOP(7) setting was causing the
Bluetooth RX thread to have to wait too long for certain actions
to complete.
Let's lower the priority to -1 (effectively) to eliminate these
conflicts.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Convert couple of MSEC() calls to K_MSEC() as the timeouts
when using MSEC() are just too long.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
During normal use, a CoAP packet can be resent due to network congestion
and other causes. During block transfer the LwM2M client checks to make
sure the block received is the one we expect and if not generates a
"duplicate" warning. When this happened, we were releasing the reply
handler and when the correct block was received the client would
generate a "No handler" error.
To avoid releasing the reply handler too early, let's set the coap_reply
"user_data" field to an error condition (1). Then, once the reply
processing is complete we can check the user_data field to be sure that
it's ok to release the reply handler.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
The code was using MSEC() macro in few places instead of more
proper K_MSEC(). The MSEC() takes seconds as a parameter and
K_MSEC() takes milliseconds.
Fixes#7657
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
sin6_scope_id is not set anywhere and not used. Probably left over
from old ZOAP library. Just address, port and family type are enough
to find registered CoAP observer.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The next error check is much more suitable to handle the error due to
the error message which lets the user know that something went wrong.
Fixes#7661.
Signed-off-by: Daniel Egger <daniel@eggers-club.de>
Current implementation hardcoded channel in received frame structure.
With this change channel can be retrieved from a OpenThread platform,
and put in the frame. In result procedures like Discovery can be
executed correctly. Change was tested with OpenThread Border Router.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit contains bugfix for Joiner eui-64 handling and setting radio
in correct mode after calling thread stop.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When designing the registration client for LwM2M, I understood
that the LwM2M Technical Specification allows for a multi-server
connection setup where the client makes several connections
to various LwM2M servers and allows each of them to manage
various aspects of the LwM2M client based on Access Controls.
However, the way I implemented it was not well thought out and
as we look forward to adding Bootstrap support, it needs a
do over.
Let's remove all of the code dedicated to handling multiple LwM2M
client connections. This will simplify and reduce the code size
of the registration client considerably.
Later, once Bootstrap support has been added, we can implement
multi-server connections in a cleaner manner.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
This allows a user to customize the port used for downloading
firmware via the pull method of the LwM2M client. It's default
value of 0 will select a random port during initialization.
NOTE: If set, this value should not be the same port as the
LWM2M_LOCAL_PORT setting.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Due to a bug where LWM2M_LOCAL_PORT was not being honored, all
outgoing traffic from the LwM2M client was coming from a random
port determined during initialization.
Now that this bug bas been fixed, let's default the client to the
behavior that most users are expecting, and let new users customize
the outgoing port if needed (which should be rarely).
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Currently, CONFIG_LWM2M_LOCAL_PORT is never used when setting up
the LwM2M client. Let's set the port of the local address using
CONFIG_LWM2M_LOCAL_PORT, so that the client can bind to it.
NOTE: A setting of 0 will use a random port.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Currently, the client_addr parameter is only used to check the
sa_family at various points during the init process. Both the
IP address and the port are ignored. Let's set the local client's
port based on the port value of the passed in client_addr if one
is supplied.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
The port parameter passed to _net_app_set_local_addr() is converted
from host byte-order to network byte-order. Here we are passing
a port value which has already been translated to network byte-order.
Let's translate the local port to host byte-order when passing it
to _net_app_set_local_addr() to fix this issue.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
L2 could take advantage of such hardware capability, when supported by
the device. This is also required for OpenThread.
Fixes#5714
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
We only clear 3 of the 6 member variables of the coap_reply structure
in coap_reply_clear().
Let's make sure to reset all of them.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
The base CoAP retry setting is quite fast for network technologies
such as LTE-M and LoRa. Let's add an option to delay retries
a bit longer depending on the need.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Using IPSO Smart Object Guideline: "Smart Objects Starter Pack 1.0"
dated May 27, 2017, let's mark the OPTIONAL resources for an
IPSO Temperature object (Section 10. "IPSO Object: Temperature").
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Using IPSO Smart Object Guideline: "Smart Objects Starter Pack 1.0"
dated May 27, 2017, let's mark the OPTIONAL resources for an
IPSO Light Control object (Section 16. "IPSO Object: Light Control")
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Using OMA Technical Specification LwM2M Enabler 1.0.2 dated
Feb. 9, 2018, let's mark the OPTIONAL resources for an LwM2M
Firmware Update object (Section E.6 "LwM2M Object: Firmware
Update")
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Using OMA Technical Specification LwM2M Enabler 1.0.2 dated
Feb. 9, 2018, let's mark the OPTIONAL resources for an LwM2M
Device object (Section E.4 "LwM2M Object: Device")
As a result, the Device object no longer configures the default
buffers for data storage of several optional resources.
The LwM2M client sample is also changed to to setup these read-only
buffers instead.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Using OMA Technical Specification LwM2M Enabler 1.0.2 dated
Feb. 9, 2018, let's mark the OPTIONAL resources for an LwM2M
Server object (Section E.1 "LwM2M Object: Server")
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Using OMA Technical Specification LwM2M Enabler 1.0.2 dated
Feb. 9, 2018, let's mark the OPTIONAL resources for an LwM2M
Security object (Section E.1 "LwM2M Object: Security")
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
This patch introduces several changes to support OPTIONAL resources.
The primary indicator for this behavior is to assign FLAG_OPTIONAL
to the object field's permission flags.
These resources are not setup by the LwM2M object code. They are
left up to the user-based code for initialization via the following
functions:
lwm2m_engine_set_res_data()
lwm2m_engine_get_res_data()
When assigning const-based data as a data buffer, user-based code can
also specify the following data flag: LWM2M_RES_DATA_FLAG_RO
The FLAG_OPTIONAL flag also affects the LwM2M engine in the following
ways:
- CREATE operations won't generate an error if optional resources are
not included.
- Object instance READ operations won't complain about missing
optional resources.
- In the future, BOOTSTRAP operations can have different handling
based on optional resources.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
In the future, we will have optional resources that may or may
not be assigned a buffer for data storage. When these resources
are queried we need to be able to return an error code if the
buffer isn't set.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Instead of selecting the first IPv4 address from the network
interface, use destination address to select the proper local IPv4
address.
Fixes#7500
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fix a build warning when compiling a net_app sample with
CONFIG_NET_APP_DTLS enabled by changing the print formatter from %zu
to %d. It references the var hdr_len which is defined as an int:
In file included from include/net/net_core.h:78:0,
from subsys/net/lib/app/net_app.c:27:
subsys/net/lib/app/net_app.c: In function ‘_net_app_ssl_mainloop’:
include/logging/sys_log.h:96:20: warning: format ‘%zu’ expects
...
subsys/net/lib/app/net_app.c:2132:6: note: in expansion of macro
‘NET_ERR’
NET_ERR("could not skip %zu bytes",
^~~~~~~
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
- Changed define for SETTINGS_CONFIG_PAGE_SIZE from a hard coded value
to reference build system generated FLASH_ERASE_BLOCK_SIZE. This value
comes from 'erase-block-size' found in the dtsi file of devices.
- Modified nrf52840.dtsi to include definition for 'erase-block-size'
Fixes#7107
Signed-off-by: David Leach <david.leach@nxp.com>
This removes some tricky math to calculate lengths and offsets,
ensuring that, when appending the WebSocket UUID to the handshake
key, the key_accept buffer won't overflow.
Coverity-ID: 183057
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Rewrite prepare_reply() to reduce unnecessary string copies and calls
to net_pkt_append_all(). Also reduces some of the tricky string length
calculations.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
In an effort to reduce the footprint of the LwM2M client, let's
lower the default # of observes handled by the client from 20 to
10.
This saves ~640 bytes of SRAM.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Remove "used" member from observe_node structure and replace by
checking the ctx for non-NULL value.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
The slist attr_list doesn't scale well when added to the LwM2M object,
object instance and resource instance structures. The goal of a
robust LwM2M client is to let the user create MANY object instances
and these will have many resource instances each. The amount of SRAM
taken up by the attr_lists will only increase over time, regardless
of the actual # of write attribute structures reserved via the
LWM2M_NUM_ATTR config setting.
Instead, let's remove the slist from these structures and add a
reference pointer to the lwm2m_attr structure. We can use this
reference to create the one to many relationship between the objects,
object instances and resource instances for a much smaller amount of
code and SRAM resources.
The sacrifice for these savings will be a larger # of iterations when
looking up assigned write attributes and matching them to their
references. However, due to the # of write attributes current being
handled, the # of iterations during this process is very manageable.
Example flash and SRAM savings when building for nrf52_blenano2:
Before patch:
Memory region Used Size Region Size %age Used
FLASH: 139532 B 512 KB 26.61%
SRAM: 36576 B 64 KB 55.81%
IDT_LIST: 148 B 2 KB 7.23%
After patch:
Memory region Used Size Region Size %age Used
FLASH: 139284 B 512 KB 26.57%
SRAM: 36000 B 64 KB 54.93%
IDT_LIST: 148 B 2 KB 7.23%
Summary: This patch saves ~248 bytes of flash and ~576 bytes of SRAM
for the typical configuration of LwM2M client in Zephyr.
NOTE: these values will vary by architecture.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
When any error is returned from update_attrs() in engine_add_observer()
an EINVAL is returned back to the caller. Let's return whatever error
code was generated in update_attrs() instead.
Also, add handling where previously errors were ignored.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
For code clarity, let's move notification_attrs structure to the top
of lwm2m_engine.c. While we're at it, we can re-order it's members
for memory alignment.
NOTE: This patch does not change the current flash or SRAM usage but
further additions to the notification_attrs structure could.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
The path member of the object instance and resource instance structures
can easily be removed to save several bytes per instance over the entire
LwM2M subsystem. So let's remove it.
Example savings when building for nrf52_blenano:
SRAM usage before patch: 37952 B
SRAM usage after patch: 36576 B
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Let's optimize the order of the following structures to account for
memory alignment:
lwm2m_engine_obj
lwm2m_engine_res_inst
lwm2m_output_context
lwm2m_output_context
Tested building for nrf52_blenano hardware:
SRAM usage before patch: 38240 B
SRAM usage after patch: 37952 B
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
It's highly unlikely that snprintk() will return a negative value, but
that's a possibility that will make the `pos` variable be set to a
value outside the boundaries of the statically allocated `buf` array.
Also clamp writes to ensure that the statically allocated buffer won't
be overwritten with a large token length.
Fixes#7070.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
In the future, when bootstrap support is added, this config won't
be used. Let's remove it.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Now that the LWM2M_OP_* bits have been renumbered, we no longer need
a custom BIT() macro for the LwM2M code. Let's remove it and use
BIT() instead.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Remove unused OP flag LWM2M_OP_NONE and renumber the existing flags
so that the operations used in object permissions land in the lowest
bits, and extended operations come later.
We may eventually add more permission / data flags, so let's try and
keep them inside a 1 byte boundary (flags with bits 0 to 7).
NOTE: LWM2M_OP_DELETE is currently not checked as a permission but
it may be in the future so it is in the lower bits.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
When a data pointer or data length is not set, the read and write
handlers should return ENOENT to generate the correct LwM2M error
code (COAP_RESPONSE_CODE_NOT_FOUND).
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Before ever call of string_to_path(), the lwm2m_obj_path object
was being cleared via memset. Let's move the memset into
string_to_path() to remove the duplicate code.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Eliminate several similar code-blocks by replacing
engine_get_resource() with a more useful function called:
path_to_objs()
By supplying an lwm2m_obj_path object, it will find and set
the related values for:
struct lwm2m_engine_obj_inst
struct lwm2m_engine_obj_field
struct lwm2m_engine_res_inst
NOTE: NULLs can be supplied where the returned value is not
important.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
If we have multiple network interface (like in VLAN), then we need
to select the proper local interface based on destination address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Without that, if ipv4 is configured via DHCPv4, server will not be
accessible. It looks like it won't properly bind addresses.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- Removed OT_PLAT_RADIO_DEVICE_NAME
- Changed OpenThread binding to use NET_AP_IEEE802154_DEV_NAME
- Modified Kconfig chain to ensure NET_AP_IEEE802154_DEV_NAME
is enabled for both native 802.15.4 and OpenThread configurations
- Changed default setting of NET_L2_IEEE802154 in defconfig for mkw41z4.
- Fixed OpenThread api support code to use the state of mIsCcaEnabled
in the transmit frame to conditionally invoke radio_api->cc() on
transmits.
Signed-off-by: David Leach <david.leach@nxp.com>
We returned too early when creating listeners which meant that
IPv4 listener was not created if IPv6 one was created successfully.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When dns_get_addr_info() returns an error it does not call the
resolve callback, and thus the semaphore will not be given.
This fix will avoid a deadlock situation for various errors.
Added some small tests for getaddrinfo().
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
Callers of dns_get_addr_info() depends on receiving an end-of-results
callback (where 'info' is NULL) when finished. Do this on failure in
cb_recv() instead of pointing to an empty object.
This fix will avoid a deadlock situation in getaddrinfo().
A reply code other than "no error" in the DNS response is a typical
case when the lookup failed and this occurs.
Moved "struct dns_addrinfo info" variable from cb_recv() to dns_read()
because it was now unused in cb_recv().
Adding tests for this requires network access and a DNS server,
or a mechanism for generating a DNS response with a reply code.
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
Do not lookup DNS AAAA entries if IPv6 is disabled. The result can not
be used anyway because "struct sockaddr" does not have enough space for
IPv6 address in that case.
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
Instead of always allocating both IPv6 and IPv4 address information
to every network interface, allow more fine grained address
configuration. So it is possible to have IPv6 or IPv4 only network
interfaces.
This commit introduces two new config options:
CONFIG_NET_IF_MAX_IPV4_COUNT and CONFIG_NET_IF_MAX_IPV6_COUNT
which tell how many IP address information structs are allocated
statically. At runtime when network interface is setup, it is then
possible to attach this IP address info struct to a specific
network interface. This can save considerable amount of memory
as the IP address information struct can be quite large (depends
on how many IP addresses user configures in the system).
Note that the value of CONFIG_NET_IF_MAX_IPV4_COUNT and
CONFIG_NET_IF_MAX_IPV6_COUNT should reflect the estimated number of
network interfaces in the system. So if if CONFIG_NET_IF_MAX_IPV6_COUNT
is set to 1 and there are two network interfaces that need IPv6
addresses, then the system will not be able to setup IPv6 addresses to
the second network interface in this case. This scenario might be
just fine if the second network interface is IPv4 only. The net_if.c
will print a warning during startup if mismatch about the counts and
the actual number of network interface is detected.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Move IP address settings from net_if to separate structs.
This is needed for VLAN support.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make the service parameter optional in getaddrinfo().
The application should be able to use NULL as service when only
interested in the host lookup.
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
Add support for MSG_DONTWAIT flag in send() and sendto(). This
aligns with the same flag used in recv() and recvfrom().
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
There was not enough space for \0 at the end of the string.
Coverity-CID: 183057
Coverity-CID: 183050
Fixes#6675Fixes#6682
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add support for MSG_PEEK flag in recv and recvfrom.
This flag is needed when using non-zephyr embedded applications with
Zephyr's socket API.
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
Add support for MSG_DONTWAIT flag in recv and recvfrom.
This flag is needed when using non-zephyr embedded applications with
Zephyr's socket API.
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
Instead of CONFIG_COAP_MBEDTLS_SSL_MAX_CONTENT_LEN, use recently
introduced CONFIG_MBEDTLS_SSL_MAX_CONTENT_LEN.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
We need to check the debug level to be INFO or higher, otherwise
the some of the variables in net app init.c will give unused
warning. Also the sys_log.h needs to be included _after_ we have
set the logging level, this is done by net_core.h so we should
not include the syslog header file here.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit creates a websocket library that can be used by
applications. The websocket library implements currently only
server role and it uses services provided by net-app API.
The library supports TLS if enabled in configuration file.
This also adds websocket calls to HTTP app server if websocket
connection is established.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Refactor recvfrom code for handling SOCK_DGRAM into zsock_recv_dgram
to align with SOCK_STREAM. Add flags parameter, will be used later.
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
We use ctx->user_data to hold socket flags. As each call to
net_context_recv() and net_context_send() overwrites its previous
value, we explicitly must pass the current ctx value there.
Without this, non-blocking socket was turned into blocking after
e.g. switching from receiving to sending.
Fixes: #6309
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If accept callback is called with error, don't treat the context
passed to the callback as a new accepted context.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
We pass normal 1-based mask, and mask invert it before logically
AND'ing with the value. This apparently a mix-up between how the
mask was intended to be passed initially and how it was in the end.
This issue actually didn't have an effect, because currently defined
flags have mutually exclusive lifetime (when "eof" flag is set,
"non-blocking" flag value is no longer import). Anyway, that's a
bug and needs fixing.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
net_app_ctx maintains multiple net contexts(net_ctx). But when http
api's wants to reply or send some data, its always choose the first
net_context in the array, which is not correct always.
net_app_get_net_pkt_with_dst() api will select proper context
based on destination address. So with the help of new api in
net_app, http can select proper context and send packets. To
achieve this, desination address is provided in http_recv_cb_t
and http_connect_cb_t callbacks. Also chaged relevant API's to
provide destination address in http message preparation methods.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Logic for sending chunks of data is incompatible with adding
Content-Length: header.
Per https://tools.ietf.org/html/rfc7230#section-3.3.1:
"A sender MUST NOT send a Content-Length header field in any
message that contains a Transfer-Encoding header field."
Going a bit further in my mind: also don't send Transfer-Encoded
chunked data either when the Content-Length header is present.
In general, there will be problems if the http client library
makes payload changes without the user code knowing about it.
This patch removes the use of http_send_chunk() from the new
HTTP client code and instead sends the payload directly to
http_prepare_and_send()
This fixes an issue where every available buffer would be allocated
with repeating payload data because the for loop in http_request()
wasn't ending until we ran out of memory.
NOTE: This patch was previously applied but was lost when
commit d1675bf3e6 ("net: http: Remove the old legacy API")
moved code around.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
In commit 9489fa54cc ("net: http: Fix http_prepare_and_send"),
the logic for when to call http_send_flush() was incorrect. This
is causing a call to http_send_flush() every time
http_prepare_and_send() is called.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
We should not use the user suppied timeout setting in
http_client_send_req() for the connection timeout. In the
previous API the call to tcp_connect() used
CONFIG_HTTP_CLIENT_NETWORK_TIMEOUT as the timeout setting.
Let's do that here too.
This fixes -ETIMEDOUT error generation when using K_NO_WAIT
for http_client_send_req().
NOTE: This patch was previously applied but was lost when
commit d1675bf3e6 ("net: http: Remove the old legacy API")
moved code around.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
In previous version of the HTTP API, commit 8ebaf29927 ("net: http:
dont timeout on HTTP requests w/o body") fixed handling of HTTP
responses without body content.
For the new API, let's add a specific fix for when PUT/POST requests
are responded to with just the status code.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Use ccache when building OpenThread. When the cache is warm, I was
able to observe that this patch sped up a clean build from 45 seconds
to 33 seconds.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Assertions should only be used to check invariants. Things that may
change value in runtime are better left to proper checks.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Assertions should only be used to check invariants. Things that may
change value in runtime are better left to proper checks.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
mbedTLS log level is obviously a mbedTLS config setting. It makes
sense to have it defined in mbedTLS Kconfig, and different parts
of Zephyr to reuse as needed (e.g. net-app vs upcoming TLS wrapper
for sockets).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
When IPv6 and IPv4 both are enabled and net_app acting as a client,
configuring local context has one glitch.
After selection of IPv6 context as a default context function
should return immediately, otherwise it continue to select IPv4
context as default context.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
In case of TCP and node acting as a APP_SERVER it can have multiple
concurrent connections. Calling close callback when there are still
active connections exists, causing an issue.
e.g. When a node acting as a HTTP server and can support multiple
TCP connections. Let's say one of the connection is in closing
state and the rest are still in active state. net_app_ctx is
calling close (http_closed) callback of registered upper layers.
HTTP assumes all the connections are closed and unref all the
connection related stuff.
Call the close callback only when there are no active connections.
Patch has also moved TCP stuff under one #ifdef.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Avoid using an uninitialized pointer when adding headers to the HTTP
context.
Coverity-CID: 178792
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
In net_app_init_client(), the remote port is set after an initial
set of checks based on the remote_addr's assigned family.
However, if the peer_addr_str is a host name which needs to be
resolved via DNS, the family won't be set yet, and the port is
left as 0.
To fix this behavior let's move the port assignment after the
DNS lookup section to be sure that the remote sa_family is set.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
RFC 7252, sec 4.8 [https://tools.ietf.org/html/rfc7252#section-4.8]
The default MAX_RETRANSMIT is 4, current implementation only
retry 3 times. Update next_timeout() to return one more retry.
Also, add a TODO for random generated initial ACK timeout
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
The existing implementation assumed DNS resolv callback will be
called just once, but that's not always the case (apparently,
for multi-homes hosts or something). So, apply array bounds
checking (and do pointer arithmetic only after it, as the C
standard otherwise warns of "undefined behavior"). In such a case,
the port number wasn't set in each entry too, so rework how it's
done.
The issues discovered while resolving archive.ubuntu.com.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Added a new API to get net pkt based on dst address. Destination
address will be used to find correct net_context.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When net_app_ctx has multiple net_contexts, selecting net_context
based on dst address has some glitches.
E.g. One net_app_ctx and two net_contexts (net_ctx1, net_ctx2).
Both net_contexts are mapped to net_app_ctx.
When a caller looking for net_ctx (e.g. net_ctx2) with
matching dst address. Loop goes through net_ctx1 and dst
doesn't match. But another if condition checks does this
net_context mapped to net_app_ctx, yes it matches.
So return net_ctx1, which is wrong.
So first go through all elements in array of net_contexts for
matching dst address, if it fails to find then go for matching
net_app_ctx.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The code in the LwM2M "Device" object was checking for this max
power source config value, except that it was never added as a
Kconfig option. Let's go ahead and add it so apps can set the
value appropriately.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
When attempting to read an unused multi-value resource such as
"Available Power Sources", lwm2m client return a successful coap packet
w/o any values. This looks like a timeout to any lwm2m servers which
make sure a valid response is returned.
Let's fix this by returning the correct NOT_FOUND error code instead.
NOTE: To test this I commented out the portion of the lwm2m client
sample which initializes the LWM2M_DEVICE_PWR_SRC_TYPE_BAT_INT and
LWM2M_DEVICE_PWR_SRC_TYPE_USB values. By default, the sample will
setup dummy values to be returned by the client.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
As per review of PR #5893, this is a follow up patch to update
select_writer() API to match the behavior of select_reader() API.
Quote from OMA-TS-LightweightM2M-V1_0_1-20170704-A. 8.2.5
"An Object Instance or Resource is Read by sending a CoAP GET to the
corresponding path. The response includes the value in the
corresponding Plain Text, Opaque, TLV or JSON format according to
the specified Content-Format (see section 6.4).The request MAY
specify an Accept option containing the preferred Content-Format
to receive. When the specified Content-Format is not supported by
the LwM2M Client, the request MUST be rejected."
Therefore, we do not attempt to assign a content-format when the
requested one is not supported. Instead, we return an error code.
0 is returned when reader or writer has been successfully selected by
select_reader() or select_writer()
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Currently, we always set the content-format as "plain/text" when
it is unrecognized. This is wrong for it's possible that payload
is actually something else.
For example, we don't support JSON as incoming format right now.
But if I send a PUT request to /1/0/1 (server objectinstance/lifetime
resource) with value 3200 in JSON format: {"e":[{"n":"","v":3200}]}.
The client will still handle the request and respond with changed (2.04)
except the lifetime resource is updated incorrectly due to parsing
error.
Correct the behavior by not setting a default format and respond with
content-format-not-support error code (4.15)
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
net_pkt_append() has been changed. If payload reached max value
of 'data_len' in net packet, net_pkt_append will not append.
So the caller has to create new packet and append remaining payload.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
During the CoAP API change, slight changes were made the ref / unref
packet pending process. Let's re-align with the coap-client sample
in how we apply the packet refs in retransmit_request() and also
replace the lwm2m_send_message() call with a direct call of
net_app_send_pkt(). This avoids a second processing of the pending
packets and keeps the ref/unref flow cleaner.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
During the CoAP API change, the way packets were ref'd and then
unref'd in order to stop the packet sending functions from releasing
the net_pkts was changed and never updated in the LwM2M library.
Let's use coap_pending_cycle() and coap_pending_clear() to do the
ref/unref the same way as the coap-client samples in order to
match the pending process with the current CoAP APIs.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Fraction could be stored with negative value.
The implementation was only considering the positive value case.
Therefore, we have to modify the code to take care of the case.
To test it
======================================================================
1. launch eclipse/wakaama lwm2m server
2. launch zephyr lwm2m client and wait for registration completed
3. Issue commands from server
* attr 0 /1/0/1 -0.1 0.1
* disc 0 /1/0
Current output
----------------------------------------------------------------------
Client #0 /1/0 : 2.05 (COAP_205_CONTENT)
105 bytes received of type application/link-format:
</1/0>,</1/0/0>,</1/0/1>;gt=0.1;lt=0/00000,</1/0/2>,</1/0/3>,</1/0/4>,
</1/0/5>,</1/0/6>,</1/0/7>,</1/0/8>
Expected output
----------------------------------------------------------------------
Client #0 /1/0 : 2.05 (COAP_205_CONTENT)
102 bytes received of type application/link-format:
</1/0>,</1/0/0>,</1/0/1>;gt=0.1;lt=-0.1,</1/0/2>,</1/0/3>,</1/0/4>,
</1/0/5>,</1/0/6>,</1/0/7>,</1/0/8>
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
OpenThread requires platform definition with standarized API
so we have to add wrappers to make it compatible with Zephyr.
OpenThread is based on autoconf, this requires
more specific CMakeLists.txt which allows to clone specific
commit or point to local copy of openthread.
Signed-off-by: Kamil Sroka <kamil.sroka@nordicsemi.no>
The meaning of this address type is the same as NET_ADDR_MANUAL,
but with a provision that DHCP can override such an address.
It's intended for the usecase when there's a default static
configuration for when DHCP is not available, but DHCP should
override it.
Before going to add another address type, there was an attempt
to repurpose TENTATIVE address state, but it doesn't work as
expected, as indeed, all existing address types/states already
have clearly semantics, and it makes sense to just another
address type to avoid confusion and unexpected behavior.
Fixes: #5696
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The idea is that static config is used unless/until DHCP values
arrive. This allows to have the same network configuration values
for both a case of direct board - workstation connection (where
DHCP is usually not available), and a case where both a board and
workstation connect to a router (which serves DHCP).
The changes in this commit however take care of netmask and gateway
settings, but not about IP address itself. This is addressed in the
next patch.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
In some cases, we need to initialize DNS servers from a binary
addresses, e.g. in case of DHCP processing. With existing API,
such addresses would need to be converted to strings, just to
be converted back to struct sockaddr in dns_resolve_init().
This is not efficient, and with a number of addresses quite
cumbersome. So instead, allow to pass DNS server either as
strings, or as struct sockaddr's (or both).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
As title, we should update the existing observe_node when new attributes
are written from server side. Add the implementation to handle that.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
1. Read notification attributes set by server to setup the
minimum/maximum notification period of a observation request.
2. Reordering to check observe_node duplication first
(bailout earlier)
3. Simplify remove observe_node condition checking
NOTE: attributes are inheritable, priority: res > obj_inst > obj
Reference: LwM2M spec V1_0_1-20170704-A, section 5.1
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Since we've added storing notification attributes written by server.
We can now append these attributes as part of link-format for discover
op.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Implement write-attribute on obj/obj_inst/res according to LwM2M spec
20170704-A, sec 5.1.2. Support pmin/pmax/st/gt/lt parameters on WRITE
operation.
The basic idea is to add sys_slist_t to obj/obj_inst/res structure.
And attach struct lwm2m_attr to the list when attributes are written
from server side (implement lwm2m_write_attr_handler accordingly)
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Instead of accessing the environment variable ZEPHYR_BASE every time we
require accessing the source code root, use an intermediate variable
that has OS path separators correctly set to '/' to avoid issues on
Windows.
Note: This removes the ZEPHYR_SOURCE_DIR CMake variable. External
applications using that will need to change to use the new ZEPHYR_BASE
variable.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
commit 2a7546fb5a ("net: lwm2m: add support for coap2coap proxy")
erroneously changed the COAP_OPTION_* used to specify the coap2coap
or coap2http proxy resource used from COAP_OPTION_URI_PATH to
COAP_OPTION_PROXY_SCHEME.
Changing it back to COAP_OPTION_URI_PATH requires us to re-order how
the coap options are appended to the packet as the coap options must
be added in the order specified by the numbers in:
https://tools.ietf.org/html/rfc7252#section-12.2
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
CoAP packet w/ confirmation flag set is required to be retransmitted
before it got the ACK message from the peer.
However, the packet is usally unreference once it's sent to the network.
Although we set the timeout as no wait when calling function
net_app_send_pkt(), it's still possible that the packet is unreferenced
before we got a chance to increase the packet reference by calling
coap_pending_cycle().
Usually, the IP stack will generate an ARP packet first and then send
out the packet. However, this is not the case when the remote is a
loopback address.
As issue #5101 described, when asking client to perform a firmware pull
on URL "coap://127.0.0.1:7783/large". The packet will be unreferenced
immediately after calling net_app_send_pkt(). Which then result in
client hang.
The solution to the issue is to increase the reference count on the
sending packet and decrease it after the process is finished.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
This reverts commit 3599d793c2.
Setting a packet's data_len here doesn't fix the fact that we shouldn't
be using it at all on RX packets. Fix belongs in net_pkt_append().
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
When testing TLS connections on production web server, it was noticed
that the TLS mainloop was getting "hung" after a connection was made
via HTTPS and then closed by the server. The TLS mainloop was never
being notified that the connection was closed and was stuck waiting
for more data.
The next time that connection was used, TLS would fail to start.
Let's force trigger a closure of the TLS process when the net-app layer
is notified of the connection closure. This allows the connection to
be successfully reused later.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
This fixes a bug when calling net_pkt_append[_all] which uses
pkt->data_len as part of the maximum packet length calculation
when the net_context is set.
Without this change the maximum packet length is calculated as 0
(the value of pkt->data_len) and an ENOMEM error is returned.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Do not reset net_context information in net_app_close. In case of
TCP behind the curtains connection might wait for some timers to
expire and send some messages (e.g. ACK). If we set source port to
'0', unexpected behaviour might happen with peer connection.
Only reset net_app context related information on net_app_close.
Let net_context_put will take care of proper connection closure.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Of these, only struct net_ipv6_nbr_data::send_ns is a descriptive
change:
send_ns is used for timing Neighbor Solicitations in general, not
just for DAD.
The rest are typo/grammar fixes.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Consolidate and standardize error handling throughout
lwm2m_obj_firmware_pull.c. As well as handle previously
unhandled errors returned from transfer_request().
NOTE: in general, unhandled errors will now result in
RESULT_UPDATE_FAILED. Previously, unhandled errors in
transfer_request() would result in RESULT_CONNECTION_LOST
which might or might not be over-written with another
result later.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
The CoAP samples use an MBEDTLS config "config-coap.h" which could be
re-used by the LwM2M sample, except that most servers use a larger
maximum content length setting of 1500 bytes.
Let's add a CONFIG to set this for users of the CoAP lib and set the
CONFIG value for the samples to the 256 size currently used.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Currently, LwM2M firmware download only supports coap2http proxy.
Let's add support for coap2coap proxy as well.
This was tested running Californium demo app cf-proxy on the host
machine with the following setting changed in Californum.properties:
MAX_RESOURCE_BODY_SIZE=524288
Add the following to the samples/net/lwm2m_client/prj.conf:
CONFIG_LWM2M_FIRMWARE_UPDATE_PULL_COAP_PROXY_SUPPORT=y
CONFIG_LWM2M_FIRMWARE_UPDATE_PULL_COAP_PROXY_ADDR="coap://[2001:db8::2]:5682"
Build the sample for qemu_x86 as you would normally, but now
you can use a real world coap address to pull firmware using the 5/0/1
resource. The host machine running cf-proxy will pull the remote
resource and then deliver it to the running qemu sample.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
- Add needed settings for DTLS support to the lwm2m_ctx structure.
- Add initialization of MBEDTLS to the LwM2M lib based on the
user application settings in lwm2m_ctx.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
The default net_context remote address is scrambled when using a
connection via DTLS. Instead let's use the dtls context remote.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
While looping through possible lwm2m_ctx matches, we're referencing
remote before checking that the context itself is valid.
Also, reduce indentation issues.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Instead of building under the "app" context, let's build the
LwM2M library as a separate static library. This will be helpful
later when adding support for DTLS as w/o this configuration,
the build breaks on MBEDTLS config includes.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
L2 specific data and IEEE 802154 net mgmt interface are not related.
Plus, application may use the net mgmt part, not the L2 one. So let's
split the content in relevant headers.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Content-format is used to determine the type of the PUT/POST
request. Therefore, it's incorrect to assign default when the
caller does not include one in the request.
Define LWM2M_FORMAT_NONE=65535 to indicate the format is missing.
The 65000~65535 is reserved for experiments and should be safe for
the purpose. Check content-type at PUT method to setup
write/write-attrs operation accordingly.
Also, add reporting write-attrs as not implemented to the caller.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
According to LwM2M specification V1_0_1-20170704-A, table 25,
incoming request is a discover op if it is method GET with
accept format as application/link-format
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
According to LwM2M specification 20170208-A, there are two different
discover interfaces supported by the device.
(1) Bootstrap discover (sec 5.2.7.3) (To be implemented)
(2) Device management discover interface (Sec 5.4.2)
- object ID is required (i.e. root directory discover is not allowed)
- attributes should be responded accordingly when implemented
This patch correct the behavior according to the spec and summarized
as follow
(1) Still support CoAP ".well-known/core" but change to report only
first level of the URI.
(2) Respond to caller only when object ID is provided unless it's
bootstrap discover
Fixes#4941
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
- Renaming NET_L2_RAW_CHANNEL to NET_RAW_MODE
- Create a generic IEEE 802.15.4 raw mode for drivers
- Modify the IEEE 802.15.4 drivers so it passes the packet unmodified,
up to code using that mode to apply the necessary changes on the
received net_pkt according to their needs
- Modify wpanusb/wpan_serial relevantly
Fixes#5004
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
In 90b471fe4, there was a change to make k_poll() return EINTR error
if it was cancelled with k_fifo_cancel_wait(). Handle this change, or
otherwise sockets EOF handling was broken.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If net_context_recv() returns a error, net pkt will not be released. For
example, net_context_recv() returns -EBADF because the TCP connection is
closed by the peer.
Handle the return value instead of using SET_ERRNO().
Signed-off-by: Aska Wu <aska.wu@linaro.org>
Token is missing when we jump to the error and token is not yet setup.
To correct it, we grab the token from the input packet at the beginning
of the handle_request()
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Copy/paste error was checking minimum measurements where it
should have been checking maximum measurements.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Initial values for the min/max measurements were 0 and this caused
issues with sensors maximums that weren't above 0 and minimums that
went below 0. Let's update those to MAX_INT so the first sensor
value update will set those to correct values.
When resetting the measured values, let's use the current sensor
value not 0.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Logic for sending chunks of data is incompatible with adding
Content-Length: header.
Per https://tools.ietf.org/html/rfc7230#section-3.3.1:
"A sender MUST NOT send a Content-Length header field in any
message that contains a Transfer-Encoding header field."
Going a bit further in my mind: also don't send Transfer-Encoded
chunked data either when the Content-Length header is present.
In general, there will be problems if the http client library
makes payload changes without the user code knowing about it.
This patch removes the use of http_send_chunk() from the new
HTTP client code and instead sends the payload directly to
http_prepare_and_send()
This fixes an issue where every available buffer would be allocated
with repeating payload data because the for loop in http_request()
wasn't ending until we ran out of memory.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
We should not use the user suppied timeout setting in
http_client_send_req() for the connection timeout. In the
previous API the call to tcp_connect() used
CONFIG_HTTP_CLIENT_NETWORK_TIMEOUT as the timeout setting.
Let's do that here too.
This fixes -ETIMEDOUT error generation when using K_NO_WAIT
for http_client_send_req().
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Add status error string when sending a error message from
HTTP server to client as described in RFC 2616 ch 6.1.
Previously only error code was sent except for 400 (Bad Request).
This also fixes uninitialized memory access in error message.
Coverity-CID: 178792
Fixes#4782
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
The addrlen of accept() and recvfrom() is a value-result argument. It
should be updated to the actual size of the source address after
calling accept() and recvfrom().
Signed-off-by: Aska Wu <aska.wu@linaro.org>
Update the firmware update_result accordingly by checking return
value of the firmware data write callback registered by application.
Also, set response code according.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Create http library that uses net-app instead of net_context
directly. The old HTTP API is deprecated.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
A regression by commit 9728179757 ("Allow net_context re-connect").
The code did not create IPv4 listener if IPv6 listener was successfully
created.
Fixes#4697
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We should call coap_update_from_block() which will determine the minimum
size of the BLOCK1 SIZE between server/client and update the current
offset and total size(if available) accordingly.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Due to parameters used, net_context_recv() call cannot fail (it just
installs a callback, no I/O performed).
Coverity-CID: 178247
Fixes: #4581
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
