Move the CAN bus network driver from drivers/can to drivers/net as it
implements a network driver, not a CAN controller driver.
Use a separate Kconfig for enabling the CAN bus network driver instead of
piggybacking on the SocketCAN Kconfig. This allows for other
(e.g. out-of-tree) SocketCAN transports.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
In order to bring consistency in-tree, migrate all subsystems code to
the new prefix <zephyr/...>. Note that the conversion has been scripted,
refer to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
According to Kconfig guidelines, boolean prompts must not start with
"Enable...". The following command has been used to automate the changes
in this patch:
sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig*
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Rename a few CAN API functions for clarity and consistency with other
Zephyr RTOS APIs.
CAN_DEFINE_MSGQ() becomes CAN_MSGQ_DEFINE() to match K_MSGQ_DEFINE().
can_attach_isr() becomes can_add_rx_filter() since a filter callback
function is not an interrupt service routine (although it is called in
isr context). The word "attach" is replaced with "add" since filters are
added, not attached. This matches the terminology used is other Zephyr
APIs better.
can_detach() becomes can_remove_rx_filter() to pair with
can_add_rx_filter().
can_attach_msgq() becomes can_add_rx_filter_msgq() and documentation is
updated to mention its relationship with can_add_rx_filter().
can_register_state_change_isr() becomes can_set_state_change_callback()
since a state change callback function is not an interrupt service
routine (although it is called in isr context). The word "register" is
replaced with "set" since only one state change callback can be in
place.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Change the can_tx_callback_t function signature to use an "int" (not an
uint32_t) for representing transmission errors.
The "error" callback function parameter is functionally equivalent to
the return value from can_send() and thus needs to use the same data
type and needs to be able to hold negative errno values.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Deprecate the use of CAN-specific error return values and replace them
with standard errno values.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Replace unpacked in6_addr structures with raw buffers in net_ipv6_hdr
struct, to prevent compiler warnings about unaligned access.
Remove __packed parameter from `struct net_6lo_context` since the
structure isn't really serialized.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
With the introduction of `EXPERIMENTAL` and `WARN_EXPERIMENTAL` in
Zephyr all subsys/canbus, subsys/net/l2/canbus, and drivers/can settings
having `[EXPERIMENTAL]` in their prompt has has been updated to include
`select EXPERIMENTAL` so that developers can enable warnings when
experimental features are enabled.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Following commits will remove k_work from net_pkt, so convert
6locan L2 to use k_fifo between application and TX thread, and
driver and RX error handler.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Replace all existing deprecated API with the recommended alternative.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Create net_l2_send() function which will be called by each L2
sending function so that we can catch all the network packets
that are being sent. Some L2 layers send things a bit differently,
so in those cases call the net_capture_send() directly by the L2
layer.
Add network packet capture call in receive side after the pkt has
been received by the RX queue handler. This avoids calling the
net_capture_send() from ISR context.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Currently there is no way to distinguish between a caller
explicitly asking for a semaphore with a limit that
happens to be `UINT_MAX` and a semaphore that just
has a limit "as large as possible".
Add `K_SEM_MAX_LIMIT`, currently defined to `UINT_MAX`, and akin
to `K_FOREVER` versus just passing some very large wait time.
In addition, the `k_sem_*` APIs were type-confused, where
the internal data structure was `uint32_t`, but the APIs took
and returned `unsigned int`. This changes the underlying data
structure to also use `unsigned int`, as changing the APIs
would be a (potentially) breaking change.
These changes are backwards-compatible, but it is strongly suggested
to take a quick scan for `k_sem_init` and `K_SEM_DEFINE` calls with
`UINT_MAX` (or `UINT32_MAX`) and replace them with `K_SEM_MAX_LIMIT`
where appropriate.
Signed-off-by: James Harris <james.harris@intel.com>
Reordering of the struct elements to match the Linux format.
The __packed() is not necessary anymore.
std_id and ext_id is merged to id in the frame and filter.
Additionally, the frames are ready for CAN-FD.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
If networking pre-emptive thread priorities are enabled,
then use the proper macro to enable them.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Unit tests were failing to build because random header was included by
kernel_includes.h. The problem is that rand32.h includes a generated
file that is either not generated or not included when building unit
tests. Also, it is better to limit the scope of this file to where it is
used.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Convert all canbus related API/samples/tests/subsys
to the new timeout API with k_timeout_t.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
Mark the old time conversion APIs deprecated, leave compatibility
macros in place, and replace all usage with the new API.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Clean up space errors and use a consistent style throughout the Kconfig
files. This makes reading the Kconfig files more distraction-free, helps
with grepping, and encourages the same style getting copied around
everywhere (meaning another pass hopefully won't be needed).
Go for the most common style:
- Indent properties with a single tab, including for choices.
Properties on choices work exactly the same syntactically as
properties on symbols, so not sure how the no-indentation thing
happened.
- Indent help texts with a tab followed by two spaces
- Put a space between 'config' and the symbol name, not a tab. This
also helps when grepping for definitions.
- Do '# A comment' instead of '#A comment'
I tweaked Kconfiglib a bit to find most of the stuff.
Some help texts were reflowed to 79 columns with 'gq' in Vim as well,
though not all, because I was afraid I'd accidentally mess up
formatting.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The callback function has been ignored in z_timeout_init() since the
timer rework in fall 2018. Passing real handlers to it in code is
distracting when they will be overridden by whatever callback is
provided in z_add_timeout().
As this function is an internal API deprecation is not necessary.
Remove the parameter and change all call sites to drop the argument.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
This commit adds support for a 6LoCAN Ethernet border translator.
CAN frames with the translator CAN address are translated and forwarded
to Ethernet. Ethernet frames with the first 34 bits matching the MAC
address of the translator are translated and forwarded to 6LoCAN.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This commits adds support for reception of packets thats comes from
a Ethernet to 6LoCAN translator. This packets carry the Ethernet
MAC address (6 bytes) inline in the FF (First Frame).
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This commit is an implementation of 6LoCAN, a 6Lo adaption layer for
Controller Area Networks. 6LoCAN is not yet standardised.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Rename the socket_can implementation from CANBUS to CANBUS_RAW.
This is a preperation for 6LoCAN which is a CANBUS L2 for IPv6.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
It is possible that the device driver API pointer is null.
For example if the device driver returns an error, the device
code will make the API pointer NULL so that the API would not
be used. This can cause errors in networking code where we
typically do not check the NULL value.
Fixes#15003
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is basically a dummy layer that just passes data through.
It is needed so that we can create CANBUS type network interface
to the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
