Standardize on using the irq_lock/irq_unlock (non-inline) symbols
everywhere.
The non-inline versions provide absolutely no benefits, so they will be
removed in a subsequent commit, and the inline versions will have their
_inline suffix removed.
Change-Id: Ib0b55f450447366468723e065a60adbadf7067a9
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Basically, this does not work anymore:
task_timer_start(<timer>, 0, X, <sem>);
since it does not make much sense to have a timer with an expiry of 0
ticks. The code internally was setting the duration to be equal to the
period anyway. So, to achieve the same behaviour, do this:
task_timer_start(<timer>, X, X, <sem>);
This has the positive side-effect of removing a small block of logic
that was handling the cases where duration was 0.
Change-Id: Ic4af4a17a129f14af4fea445bcaddabe89c27131
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Reflect the fact that they are not used.
Change-Id: I6ea83cb2c7532e10988cbf4350edccb78f444328
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Align with the newer terminology used for microkernel internal symbols.
Change-Id: I623b383f90d9e37a49429a79774c7f7a4953bd5f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
irq_handler_set, irq_priority_set and irq_disconnect have been made
private by prepending an underscore to their names:
irq_handler_set -> irq_handler_set
irq_priority_set -> irq_priority_set
irq_disconnect -> irq_disconnect
The prototypes have been removed from header files when possible, and
extern statements used in C code where they were called.
_irq_priority_set() for ARM is still in the header file because
IRQ_CONFIG() relies on it.
Change-Id: I2ad585f8156ff80250f6d9eeca4a249a4477fd9d
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Doing those checks went against the Zephyr philosophy of no error
checking unless absolutely necessary. Users should ensure themselves the
validity of their inputs to kernel APIs.
Change-Id: I21e5cd07ff9424ad61e81fd9d52ceef0c9584a8c
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
task_event_set_handler -> task_event_handler_set
Align with the "verb at the end" convention.
Change-Id: I8b72d41a20a7fdd4756f90765682e317289a241b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
task_pipe_put_async -> task_pipe_block_put
task_mbox_put_async -> task_mbox_block_put
task_mbox_data_get_async_block -> task_mbox_data_block_get
task_mbox_data_get_async_block_wait -> task_mbox_data_block_get_wait
task_mbox_data_get_async_block_wait_timeout ->
task_mbox_data_block_get_wait_timeout
Previous names, focusing on 'async', were misleading, because:
- some of those APIs can be used synchronously as well
- other APIs can also do asynchronous transfer, and don't have 'async'
in their names
- the key concept of these APIs is that they use memory pool blocks
rather than raw data buffers.
Change-Id: I0c08a6cf950ab23bb4172ce25eb6f9886b037649
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Add a project that shows how to collect the
data from the profiler.
Change-Id: Ie9cc88290de594720739b30d4e872fe51d353f6e
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
leftovers from the renaming activities:
nano_node_tick_get_32 -> nano_tick_get_32
Change-Id: Ic9f0870ddda159311005c2ed16e0a378ab9a6a62
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The PIT is an unsupported device. On x86 based platforms, the LOAPIC_TIMER and
HPET_TIMER are the only supported timers.
Change-Id: Ic890838c811b7eb62008aef0c8a92786f1579217
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removes the LOAPIC timer macros from board.h as they are no longer required
since appropriate Kconfig options exist to use in their stead.
Change-Id: Id0b509eba7cce1839b400f95b989bf886322e1a8
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
As no default platform configuration uses the PIC/PIT, the project
configuration file 'prj_console_pc8253.conf' is no longer required.
Change-Id: Ic91922e9431a2853bb5fdcdd3e31e39f3dce90c4
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
As no default platform configuration uses the PIC/PIT, the project
configuration file 'prj_pc8253.conf' is no longer required.
Change-Id: I89fac2685d9fca0452e5ce9d9b035e102bd62d70
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removes the following project configuration files:
- prj_console_float_pc8253.conf : PIT is no longer used
- prj_console_nofloat_*.conf : unsupported by Makefile
Change-Id: I72689fa56413947f3a552645c7b2ed5ad599ed71
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removes the HPET timer macros from board.h and uses the HPET timer Kconfig
options in their stead.
Change-Id: Ia0b3cd87716277ac25f12deb31d5c5934f355050
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This adds unit test for microkernel private memory maps.
The code piggybacks to the public memory map test (by
including the same source file), so any updates to
the test will be applied to both.
Note that the prj.mdef are different for both tests, since
the private memory maps test move the memory maps inside
source code. So, both mdef files will need to be updated at
the same time.
Change-Id: Ia7f65f55b61d9fb0d42ba58d63662e914d69194e
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds unit test for microkernel private pipes.
The code piggybacks to the public pipe test (by
including the same source file), so any updates to
the test will be applied to both.
Note that the prj.mdef are different for both tests, since
the private pipes test move the pipes inside source
code. So, both mdef files will need to be updated at
the same time.
Change-Id: I6fdb5eab7c3a1d6f4b72c26a3620cee0188b07a5
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds unit test for microkernel private tasks.
The code piggybacks to the public task test (by
including the same source file), so any updates to
the test will be applied to both.
Note that the prj.mdef are different for both tests, since
the private tasks test move the tasks inside source
code. So, both mdef files will need to be updated at
the same time.
Change-Id: I2890f70be460c0e45208ce03d6e7897d2662f6f0
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds unit test for microkernel private mailboxes.
The code piggybacks to the public mailbox test (by
including the same source files), so any updates to
the test will be applied to both.
Note that the prj.mdef are different for both tests, since
the private mailboxes test move the mailboxes inside source
code. So, both mdef files will need to be updated at
the same time.
Change-Id: I52ccc5931b1abfd3ae3d654f888d4a019268bba0
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds unit test for microkernel private FIFOs.
The code piggybacks to the public FIFOs tests (by
including the same source file), so any updates to
the test will be applied to both.
Note that the prj.mdef are different for both tests, since
the private FIFOs test move some of the FIFOs
inside source code.
Change-Id: I4130ac540b10a31cd30f37890e9cc389af73e89b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds unit test for microkernel private semaphores.
The code piggybacks to the public semaphores tests (by
including the same source files), so any updates to
the test will be applied to both.
Note that the prj.mdef are different for both tests, since
the private semaphores test move some of the semaphores
inside source code.
Change-Id: Ic318bf6808514c5d335a46cb3e88ebf6000f4c3e
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Enhances the existing microkernel mutex test project to verify
that recursive mutex locking works properly. The implementation
utilizes the new in-file defined mutexes to demonstrate that
this capability also works.
[DL: Update the original patch from Allan Stephens
@ https://oic-review.01.org/gerrit/3256 to utilize
the new interface. Also updated the commit message. ]
Change-Id: Iaf8b4a5cd97d1dce53d6134a978cc565279d038c
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Some devices (eg. Android KitKat) are confused if remote database
is empty.
Change-Id: Ie27920b6f64b12903917068101d5abb171ab42c0
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
If bt_gatt_subscribe -EALREADY that means it is already subscribed and
shall not be reused.
Change-Id: I83c620454c40863c71b1289d37c2b42571a907fd
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In the peripheral sample app use the async feature of bt_enable() to
verify that it works as expected.
Change-Id: I15f7758944a8c34d1aaef84f0ba77a6b5bbb4695
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We need to be able to perform the init procedure asynchronously
through a callback. The RX fiber is a good candidate to use for the
callback since it's not active in its normal operation before
drv->open has been called. In order to prepare for a future
bt_disable() API the init API is renamed from bt_init() to
bt_enable(). If a NULL pointer is given as the callback the API
behaves synchronously like the old bt_init().
Change-Id: I4e78fa8f32dcf5477ea05a8db75aca5cdce591fd
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Attribute length can be up to 512 bytes long so it needs to be at least
uint16_t, ATT already takes care that the MTU does not exceed 512 bytes.
Change-Id: I6c8dc80a4b63f212420c26c0a24d93939fa510fe
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
echo-server can now receive both unicast and multicast UDP
messages.
Change-Id: I3837b8e7126584fa7c87958e68a8439824abd5ab
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This makes the central sample discover the attributes and subscribe
to receive notifications of HeartRate Measurement Characteristic.
Change-Id: Icedbdd759638be0b8fa8515112208aa61ad5eb90
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes central sample to parse the Advertising Data and in case the
device supports HeartRate Service stop scanning and connect to it, if the
device disconnects then start scanning again.
Change-Id: I49962eadb5c82c7a910185212063cd576cadf62e
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This will be needed to monitor connections with peripherals.
Change-Id: Iccea2696af72b0b8b3f40aac180738dc6b80abc8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
With this patch advertising state and scanning state are stored as flags.
Change-Id: I5d2dc37972620ee89aaf55d45e294e8be82863d3
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds gatt-unsubscribe which works as follow:
btshell> gatt-unsubscribe <CCC handle>
bt: gatt_write_ccc (0x0010edc8): handle 0x0015 value 0x0000
Unsubscribe success
Change-Id: I812fd237f71c4cad8e188015f1cd4cd2f2902aa6
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Once connected store the bt_conn as context, this save the trouble of
entering the same parameter over and over and remove the lookups from
commands that requires a connection.
Change-Id: I9671b8fa07a1a61db45516f63eb007f19f0e59a1
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Change-Id: I50f0f4548fdf5c79c783f4055974e427ba9cbfe8
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Removes references to obsolete BSP terminology from the sample projects and
replaces it with references to platforms where appropriate.
Change-Id: I6c8071a84f77c2cfe1458e3891d2b5e5afdaf8f9
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removes reference to the unsupported "-T <toolchain>" option and the replaces
the deprecated "-B <BSP>" option with "-P <platform>".
Change-Id: I21ab863dded9cbfd4fc0ab2fcade59137add08cf
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Fixes README.txt for nanokernel's test_xip to refer to the nanokernel instead
of the microkernel.
Change-Id: I03866e88ec67515b827b901d49b1e7b10d3866d0
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Fixes a couple of references to obsolete resource terminology; they now refer
to mutexes.
Change-Id: Ie7f837b6657891bdde9b09bb0ff2311fe4c19928
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The online help ./scripts/sanitycheck --help describes usage.
Most users will simply want to run with no arguments.
Change-Id: Icedbbfc22599a64a6e3dbbb808ff3276db06f2e0
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
It appears more conventional to require callers of function-type
macros to supply the trailing semicolon.
Change-Id: I40c67cf2ec8f7e85bdc9d8a2a29698b56d9715c6
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Adds to btshell app a command to enable mimic GATT client to
perform multiple read attributes request using set of input handles.
The syntax is: gatt-read-multiple <address> <addres-type> <h1> <h2> ...
Handles should be entered as hex values and are 2-octets wide each.
Change-Id: Ic37a4486a11c645685cbfc782d36457af0fe9453
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Allows shell commands read more number of input parameters.
It is updated to 10 input parameters.
Change-Id: Ia943e8c6f0caaaf74cebcdb9dbe3542d90b2e4b9
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
This function operates on bt_conn so it should be in conn.c and
exported through conn.h. Rename it with the appropriate bt_conn_*
prefix.
Change-Id: Id17c67f0e95cc1afb10aa7742b2d2ce0110ea616
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The bt_disconnect deals with the bt_conn object and should therefore
reside in conn.c and be exported through conn.h. It should also have
the appropriate bt_conn_* prefix.
Change-Id: I75eb648fd9aa8ced9a991d472c319d25f4b772af
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Update test_15_4 makefile and prj files to support
CONFIG_NETWORKING_WITH_15_4_LOOPBACK_UART build.
Change-Id: I8247b67b1beac18f7c62349d049694cf5aa437ca
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Removes references to old platform names.
Change-Id: I65baa148006fbda916904914844b1b347f8ec654
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removes references to old platform names.
Change-Id: I53e9994c794c6b4c292e776355a67b7923c2fdb8
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Renames supported platform configurations to conform to new platform
configuration naming scheme.
Example usage with PLATFORM_CONFIG:
make PLATFORM_CONFIG=basic_cortex_m3
make PLATFORM_CONFIG=basic_atom
make PLATFORM_CONFIG=basic_minuteia
make PLATFORM_CONFIG=galileo
xxx_ti_lm3s6965_defconfig -> xxx_basic_cortex_m3_defconfig
xxx_generic_pc_atom_n28xx_defconfig -> xxx_basic_atom_defconfig
xxx_generic_pc_minuteia_defconfig -> xxx_basic_minuteia_defconfig
xxx_quark_defconfig -> xxx_galileo_defconfig
Change-Id: I696eb8b9ad9a72d7a72efbe1341ce23500335764
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Uses PLATFORM_CONFIG to specify the configuration file instead of
KBUILD_DEFCONFIG. This name is more intuitive to Zephyr users and
it is not tied to kbuild.
Example usage:
make PLATFORM_CONFIG=generic_pc_atom_n28xx
make PLATFORM_CONFIG=generic_pc_minuteia
make PLATFORM_CONFIG=quark
make PLATFORM_CONFIG=ti_lm3s6965
make PLATFORM_CONFIG=fsl_frdm_k64f
Change-Id: I177608942c3e77c2f152743c862aad1d460c0e33
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The generic_pc and generic_pc_pentium4 platform configurations are not
essential configurations to Zephyr.
Change-Id: Idd384bc7f180c035b1467e8b56fbfe206604658f
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes default KBUILD_DEFCONFIG to xxx_generic_pc_atom_n28xx_defconfig as
the xxx_generic_pc_defconfig configuration will not be supported in the future.
Note that like generic_pc, atom_n28xx runs on QEMU.
Change-Id: I49c5708e4b24dbf723eefc1efddfea4174d9cb1c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Network sample projects no use KBUILD_DEFCONFIG instead of BSP. This
is a necessary step in transitioning from BSPs to platforms.
Change-Id: Ia1ebb697d9e68974f71faa467f1f946f0d1afbd1
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Nanokernel smaple projects now use KBUILD_DEFCONFIG instead of BSP. This
is a necessary step in transitioning from BSPs to platforms.
Change-Id: I47f75742b663edd7c4b1858425d4583f0bc74ae7
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Microkernel sample projects now use KBUILD_DEFCONFIG instead of BSP. This
is a necessary step in transitioning from BSPs to platforms.
Change-Id: I916819262cabf70296e15d9b1321fc383b88a805
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Bluetooth sample projects now use KBUILD_DEFCONFIG instead of BSP. This is
a necessary step in transitioning from BSPs to platforms.
Change-Id: I42c89d0b5c3d7de7ea62297950bb00f56ca97ed2
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Updates Kconfig option names as part of transforming BSPs to platforms.
Change-Id: If397bcac8b058e5700e82c3cabbfe64588316d1d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Revises the memory pool test project so that the maximum block size
is a power of 4 multiple of the minimum block size, as a reminder
of the required relationship between minimum and maximum block sizes.
Change-Id: Iff5480b7870c261d43c5a857c71a44beffc6c7f0
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
There is no need to refer to a data passing microkernel object
as a 'channel'.
Change-Id: I730f88d6e77ab075832e7ed48b20eb2ec46b5ed4
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Change the function signature of _InitHarware() function and rename
the function to a platform specific name now that it will be called
via a function pointer and not by name.
Call the platform *_init() function at PURE_INIT time.
Change-Id: I5168dfea81f406da135d491a2b4a24e8255f418a
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
The nanokernel routine nano_time_init() is automatically invoked by the
constructor initialization code, and should be invisible to the application.
Change-Id: Ic75f84856c333187a4f9fef8569698e056f6d936
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Instead of aaaa::/64 address space which is part of global
IPv6 address space, use the 2001:db8::/32 which is meant
for documentation purposes and is not routable.
Change-Id: I56db34da852f8c313379c764bdf75a19151c45bd
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This allows to enable advertising with some fixed Advertising Data
and Scan Reponse.
Change-Id: Ie3a33a49fe8517c9e931b7805694bd9c7b05fcdb
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
The listening socket was creted after we started to send data
so data was discarded. Now we first create listener and then
start to send data to it.
Change-Id: Iee706c7c862d16a582ee973b10598dde5e5f0bd0
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
set_mac was removed in net_set_mac is in init_test(). Rebase was
not done successfully.
Change-Id: I0d1a2f37cdb441064ae97a0e34ae41e9c7e77984
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Set the MAC address so that the stack can generate a link
local address and mark internal variables as static to avoid
namespace pollution.
Change-Id: Ic8447054629fcdd5f7e1f8b8c5e2bb477bd63809
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The echo server is listening on port 4242 and when it receives
UDP packet, it will reverse the data and send it back to the
caller. This can be used to verify that the IP stack is doing
something useful.
Change-Id: Ibbc48c21f2513d59480c5a3bb34c775eb3df8170
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This adds gatt-exchange-mtu which works as follow:
btshell> gatt-exchange-mtu <bdaddr> <bdaddr_type>
bt: bt_gatt_exchange_mtu (0x0010c138): Client MTU 65
Exchange pending
btshell> bt: bt_att_recv (0x0010e310): Received ATT code 0x03 len 3
bt: att_mtu_rsp (0x0010e310): Server MTU 517
Exchange successful
Change-Id: I7280fb9d9fafc0f4bd1ef0f2226c255a5acf2592
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes it easier to use shell since one can copy full address
from console output. Both variants with and without braces are
accepted.
btshell> connect 7C:2F:80:94:97:39 (public)
Connection pending
btshell> Connected: 7C:2F:80:94:97:39 (public)
btshell> disconnect 7C:2F:80:94:97:39 public
btshell> Disconnected: 7C:2F:80:94:97:39 (public)
Change-Id: Ic10386ee054ade1900e5f010857c0f85e5cb364a
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Remove function name from comment and add @brief instead.
Also capitilize first letter.
Change-Id: Ib708b49bf02e5bc89b0066637a55874e659637e0
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Previous comment style used RETRURNS:, use @return to comply
with javadoc style.
Change-Id: Ib1dffd92da1d97d60063ec5309b08049828f6661
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Some comments have \param, convert them to javadoc style.
Change-Id: I6abcdab91f4f616632392292600f4b0081b2a842
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The change replaces multiple asterisks to ** at
the beginning of comments and adds a space before
the asterisks at the beginning of lines.
Change-Id: I7656bde3bf4d9a31e38941e43b580520432dabc1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Enables make outgoing connection with error handling.
Free connection objects maintained in polls are assigned to active
connection by result of lookup on the polls based on input
peer LE address.
Updates shell application to reflect above changes in stack.
Change-Id: Ibc71343c0d122cc78c48bac2ff1e50533369b7d2
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Notifications will be sent on connected/disconnected events.
Change-Id: Iaac6851a987a630ce41c5836de49dccc6ee5d385
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds support for enabling advertising on DUT. For now
setting custom advertising data or scan response is not supported.
Change-Id: I506d944565e524eb2103949df6cf003347d4c117
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Also rename bt_conn_security function to bt_security and
bt_conn_security_t to bt__security_t.
Change-Id: I543c7b97241c4389ef0eb491b6869f93105ae533
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
This allows to elevate security of a connection.
Change-Id: I492a92026c8db6feccffb96334be4557a5c73b48
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
This way the stack will generate a proper IPv6 link local
address.
Change-Id: I149d82cf5623f3073b9edc64fe4e426460eb793b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The mac address length needs to be 6 bytes because this
test app has no 802.15.4 support. The uIP stack checks
this and expects only 6 bytes mac address in this case.
Change-Id: I1edd340491b4690b5a2cf285c63f90950bbc3ff3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Stress test the IP stack by always sending max number of bytes.
Change-Id: I830a92cca4efbc2aa00dd1bec75972884359621c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The test_15_4 test application now works with microkernel also.
Change-Id: I041a917be599936089af9ffaba9c27b9aeb5a481
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Enable 802.15.4 driver that receives the IPv6 packet, does header
compression on it and writes it to the 15.4 stack Tx FIFO.
The 15.4 Tx fiber will pick up the header compressed IPv6
6LoWPAN packet and fragment it into suitable chunks ready
to be sent to the 15.4 hw driver. The 15.4 stack Rx fiber picks
15.4 frames from 15.4 Rx FIFO (which are fed by 15.4 driver)
and reassembles the all fragmented packets and uncompress the
header and writes to the IP Rx FIFO.
The 15.4 loopback radio driver receives the 15.4 frames and
put it back to 15.4 Rx Fifo.
Change-Id: I68d1c7ff6de0e8770616e574206c2091c69a28e6
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Set the loopback IPv6 address and an all-zero MAC address as the
loopback device really does not have a defined MAC address.
Clean up the code so that the loopback driver's IPv6 addresses are
not reused in other parts by mistake.
Change-Id: I07cc8bc5ad3a2ec5997bb313dd0ecaca4d9742f7
Signed-off-by: Patrik Flykt <patrik.flykt@linux.intel.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Now that bt_conn is public using it directly is much more convenient
and in some cases save a lookup by address.
Change-Id: Ia489948634984fe4f1a430da553f8a2a740fb531
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The sample should be under microkernel and not in the
top level samples directory.
Change-Id: Ide98fa64a5a6831f83bec25b778f9d5b39bdb4e7
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Updates references to CONFIG_BSP_DIR to CONFIG_PLATFORM as part of the
BSP -> platform clean up.
Note that despite the renaming, the usage of the config option remains
unchanged.
Change-Id: I2846c3f761cf09871019c0855bf1824ae03e6b3c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The new name better reflects that this file contains all private
nanokernel APIs that are used by various kernel subsystems.
Change-Id: I4c258d582e93753eec9e575fdb5f9f2109417a0f
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
In order to provide the same irq_connect() on all platforms
on x86, irq_connect() now uses a static array of interrupt
stubs. Device driver does not need to provide interrupt stub
to irq_connect() function.
Add NUM_DYNAMIC_STUBS configuration parameter, the number
of interrupt stubs used for dynamic interrupt registration.
Modify tests for unified interrupt register API
Tests that deal with interrupts are modified to work
with the new interrupt registration API.
Add CONFIG_NUM_DYNAMIC_STUBS option to dynamic interrupt projects
Projects that use dynamic interrupt handler registration on x86
have to include CONFIG_NUM_DYNAMIC_STUBS parameter in the
configuration.
Change-Id: Ic90c726485521a57cf695fd3edc8cac85d0b827d
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Makes name more consistent with other CPU_CORTEX_M* options.
Change-Id: I65968cb300207ba0de6231d9a67f2720be77b6ba
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
CPU_CORTEX_M3_M4 replaces CPU_CORTEXM3 as the umbrella option for Cortex M3/M4
processors.
NOTE: Selecting CPU_CORTEXM4 still currently forces the selection of
CPU_CORTEXM3. Breaking that forced select will be done in a later commit.
Change-Id: I0f36b3a2adc5c6c66db4e9b6353b921199544deb
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds new commands to shell app allowing turn on/off active LE scan.
App uses scan results callback to get feedback when found any
advertisers around.
The dummy app's callback prints out info about findings.
Change-Id: Ifffe77b804230c19bbbcbc4f38e47210c835106d
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Enables sending LE discovery results to user app.
Updates central apps to use new scan API.
Change-Id: Id319c96e15554f2eed4cf507cddd114ca74aa8e5
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Return code from command handler is not needed and was already ignored.
Change-Id: Ief073ccfe2ccd316b6d4eec5168fb564e96786ee
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
This makes code looks similar to POSIX style parameter handling.
Also code is easier to read and doesn't require tricks like
'p += strlen(p) + 1' for next parameter.
Change-Id: I013e714ba81681da38e320fb69851c7b5a75bb52
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Adds above commands to the shell app.
Connection is made based on given address and type eg:
btshell> connect 00:00:00:00:00:00 public
In callback we get local connection id which is in fact,
the number of array entry in which the pointer to the corresponding
bt_conn has been written.
To disconnect, just provide the id eg:
btshell> disconnect 0
Change-Id: I24f7ec2de7f84c53ab847ded28a1821753c2a60d
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
There's no clear need for this API (at least for now) and supporting
it means we really need to get all state cleanup procedures correct.
Remove it for now.
Change-Id: Ia2c7d51d410117bef12bc08f4f97a4e38ccfb77a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This makes it clearer that this is a specialized API not intended for
general app usage (unlike most other things in bluetooth.h).
Change-Id: I0ce1d5903610a9b3a99cf0be9f0e1462b04bf45a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Always prefix UUIDS for characteristics with service name.
Change-Id: Ic435fa725e6bc8918af631632156b071121cd0e0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
According to section 3.7 of Documentation/kbuild/makefiles.txt, using
EXTRA_CFLAGS in Makefiles is "still supported but their usage is
deprecated."
Change-Id: I585a9f84e8239a59b0f5b29eed0dc70efa253522
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Now that we have a publicly exposed connection object it makes sense
to pass that to the connection callbacks rather than an address.
Change-Id: I8e9b17733d1789539a83c3dbc7a778336d2b71ff
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
For consistency, when including public header files, use <> rather
than "".
Change-Id: Id780388759c33d865f49c9e0faf9cde2251ca869
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This one should be used for all public connection related APIs. Right
now it includes the reference counting and connection callback APIs.
Change-Id: Ib9b67e6115bb2e51322644757da1170851c3ca17
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This fix a build issue after last rename of TIMO -> ZEPHYR in build
system variables.
Change-Id: Iba9fb2ae13df0c66c7c1031b3a27795a9ead0e97
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Simple tests to verify whether the microkernel timer system works
alongside the nanokernel timeouts and timers system.
Once the timer test is started, the nanokernel fifo timeout test is
started in parallel: each other's timeout times should not be affected
by the other. Also, a fiber is started, pending on a nanokernel timer,
and awakens in the middle of the microkernel timers expiring.
Change-Id: I05b307e58ac942961a4163cbe845a9bb732ecfb7
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Test the nano_xxx_fifo_wait_timeout() APIs.
First, the task waits with a timeout and times out. Then it wait with a
timeout, but gets the data in time.
Then, multiple timeout tests are done for the fibers, to test the ordering
of queueing/dequeueing when timeout occurs, first on one fifo, then on
multiple fifos.
Finally, multiple fibers pend on one fifo, and they all get the
data in time, except the last one: this tests that the timeout is
recomputed correctly when timeouts are aborted.
NOTE: The timeout APIs test is contained within its own file so that it
is easily reusable by a microkernel test that verifies that nano
timeouts and microkernel timers can coexist.
Change-Id: I5aae2d89651914fb6c39d8d09a56c7fa54533453
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Test the nano_xxx_lifo_wait_timeout() APIs.
First, the task waits with a timeout and times out. Then it wait with a
timeout, but gets the data in time.
Then, multiple timeout tests are done for the fibers, to test the ordering
of queueing/dequeueing when timeout occurs, first on one lifo, then on
multiple lifos.
Finally, multiple fibers pend on one lifo, and they all get the
data in time, except the last one: this tests that the timeout is
recomputed correctly when timeouts are aborted.
Change-Id: Ida951fda746539253b9a165f48be6931d6bee05c
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Test the nano_xxx_sem_wait_timeout() APIs.
First, the task waits with a timeout and times out. Then it wait with a
timeout, but gets the semaphore in time.
Then, multiple timeout tests are done for the fibers, to test the
ordering of queueing/dequeueing when timeout occurs, first on one
semaphore, then on multiple semaphores.
Finally, multiple fibers pend on one semaphore, and they all get the
semaphore in time, except the last one: this tests that the timeout is
recomputed correctly when timeouts are aborted.
Change-Id: I73c174e6f15f38377a14573cb7f531e5e6ca4c07
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The test verifies that delayed fibers are started in the right order,
and that cancelling delayed fibers recomputes correctly the timeouts in
the queue. Also test the fiber_sleep() API.
Change-Id: Ic3169a90b434a81c96e7c5d3c74c39431c988f39
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Moves the Bluetooth regression script 'bt_regression.sh' so that it resides
in the same directory as the other sanity scripts. It also renames it to
'bt_regression_chk' so that its name is consistent with the other sanity
scripts.
Change-Id: Ia5a683e2c370c91a90edc648634ce56e484dcc20
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
KLIB_DIR builds are a relic from the previous build system.
Change-Id: I382db45f0a21786e1b7c50c9a881c82feb2c7481
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This commit set back .S as the assembly code extension for Kbuild.
Change-Id: Ib0119876bd0bed6617bbfbad2ca6a44e172ab042
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This API now uses an approved Zephyr OS prefix.
Change-Id: I1041b982492ea7b76213e3b57cf28a9f17e7fd9d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Eliminates confusing references to "channel", and improves
readability of project output.
Change-Id: Ib4f699caae5a015832207a408bd168903e791756
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The new build system no longer uses this directory, since it rebuilds
the (minimal) standard C library every time a project is built.
Change-Id: I1ca6b949bfa260f1d262276be653ddd6bd1cc53b
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The source is included to the manual and putting more comments helps
to understand the code.
Change-Id: Iefd6db2abf6070fd8c3fabdaf4946bdd7a045544
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fixes compile errors:
...
Makefile:36: /make/env/defs.base: No such file or directory
Makefile:47: /target/make.ukernel: No such file or directory
make: *** No rule to make target '/target/make.ukernel'. Stop.
...
Change-Id: I693a939510b732ac810d5af756422c58e3f0c3ab
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fix typo and reformat test to make it more logic and reflecting
doxygen documentation.
Change-Id: Id869f0131132c9287eab71d11ae40d194a20ca20
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This application is intended for automated testing. It used binary
protocol for communication over UART and can be used for driving
Bluetooth stack by external tester.
Currently only single command registering (init) GAP service is
implemented.
Change-Id: I62e151baa2badc0f1297e65591b5f494ff7b841e
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
LD microkernel.elf
samples/bluetooth/peripheral/src/built-in.o: In function
`mainloop':
samples/bluetooth/peripheral/src/main.c:514: undefined reference
to `sys_rand32_get'
collect2: error: ld returned 1 exit status
Change-Id: Idec91d59fd98ec06f5e5728238cf9d9f6c37eb87
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Add battery level simulation decrementing from 100% by one every
second.
Change-Id: Ic6b819c32b42d65a044223f22e301835510823a4
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Manufacturer Name String in DIS is a mandatory feature for Heart Rate
profile as specified by HEART RATE PROFILE Spec.
Change-Id: I552b51b68012edfc4389604e91dd43b8b54fe65f
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add Heart Rate simulation using 1 second sleeping loop and this is how
it is recommended in the Heart Rate Service Spec.
Change-Id: I1023a4089bc661a399acf865f4fc7afaf72b8f0f
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This registers two simple callbacks for connection and
disconnection events.
Change-Id: I9e1f87d9e1a3c8ef457e15a1c30396fba7f7df4a
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
After quark UART configuration was refactored it is not working
anymore. Since quark was never an officially supported target just
remove it from the regression tests.
Change-Id: If4bae99f5e0dfecfd3729ac0c42d7fd3d8affa0c
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Implement Current Time write callback.
Change-Id: I2a6cb0b411c47e4d20ff34eadf8725bf23b0b7b9
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This field can be used to set the required permissions for an attribute
which can be checked by Bluetooth core before calling the callback.
Change-Id: Idcab8cdc5744358fab0b3c67b9c0503f1d1d9736
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add Device Information Service along with model characteristics and
descriptor to the database table.
Change-Id: I28775cf48abe76d0a841ebc92e1579e2d4cdfa09
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This uses BT_GATT_CCC to declare CCC descriptors which makes the core
to managed the CCC configuration so the task don't have to do it.
Change-Id: Ied4fc7eaa1f9f3e6c23d4d5b20d5c26d606f93f4
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
To implement CCC properly it is required to know the remote address since
it is per client, futhermore bt_gatt_notify requires an address where to
send the notification.
Change-Id: I9d9fdf72d668831bed76e2aef06816af3620f4b8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds write callback to CCC descriptors storing the value in a stack
variable.
Change-Id: I8cd2567c6fee730500b446192b73fc82d86ba1ff
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add Notify property and Current Characteristic Configuration to Current
Time Service in peripheral app.
Change-Id: I44f36eea4f129c7b407b045da892f2ba88338592
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add Current Time Service currently providing hardcoded time since
there is no way of getting current time in the OS.
Change-Id: I9954d51f77905230a6dd180f37d3a48f379c69ec
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Updates references to this environment variable, which were missed
during previous renamings.
Change-Id: I1126271ce8b84d3eaedeab11198d3a3b645393af
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Since the build system now supports only one toolchain, the
VXMICRO_TOOL environment variable is obsolete. The sanity
check scripts that reference this symbol are revised accordingly.
(Note: As a temporary measure, the main sanity check script
continues to accept the -T option; however, the option has no
effect.)
Change-Id: I383b128b9f5b07164abb7ddeb5a699d819a20316
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The file extension indicates a "Microkernel DEFinitions" file,
and no longer reflects the obsolete VxMicro/Viper branding.
Change-Id: Ib95b271404a4a4737e851d603c371244fa609e4d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Eliminates references to the obsolete OS name. In most cases the name
is simply removed, as it isn't necessary.
Change-Id: I3796f2aebe802f8c6045b7424a3e7aab4d5fb8e8
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Gets rid of obsolete OS name, which isn't really necessary anyway.
Change-Id: Ic25b3addd43c84a75dacd6c61fdcc7a53217d320
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This warning isn't relevant to Zephyr OS.
Change-Id: I8a115dec61c0c325e5b09337cd3a785fb0f5c75b
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The ENDGROUP symbol isn't needed as it is identical in nature to
ENDLIST. The EMPTYID symbol isn't referenced anywhere (or described).
Change-Id: Ic2ba115ee6cde65fa5e57f8607ffa95979ba5f5a
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Several files were not explicitly including APIs that they reference,
which could eventually lead to trouble.
Change-Id: Ib33cadfa658280df3fcb4c670463d41b63097b31
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Gets rid of this non-standard terminology, and spells out
"microkernel" in full (when needed at all).
Change-Id: Ibfae84225fdceb526d8732bc23a0885f2d3be462
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Removes the instruction directing users to issue "make pristine"
before building a sample project, as this should be unnecessary
under normal circumstances and can cause the user to unexpectedly
lose their current configuration information. In its place, a section
on troubleshooting is added that describes how to rebuild a project
using the desired configuration.
Change-Id: I4eaace2888000c3ec5d101c27a38c74c2987312e
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Gets rid of single-line comments required by a previous set of
coding conventions. These comments provide no value to readers
and just clutter things up.
Change-Id: I2a08b12cf5026253de56979efdfc510e7e68defe
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises kernel so that it uses the standard boolean type library
defined for C99, rather than having its own custom boolean type.
Also revises sample projects that used the non-standard type.
Change-Id: Ib41b7f836da25352aa5ae9dfbbfdd29739017b6f
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
As a result of the conversion to the new build system, this file
was missed when the test project was eliminated.
Change-Id: Ie61d2549910cfeee2c0627451d05a5b1faff3deb
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
According to section 3.7 of Documentation/kbuild/makefiles.txt, using
EXTRA_CFLAGS in Makefiles is "still supported but their usage is
deprecated." However, using make EXTRA_CFLAGS="-DSOMETHING" results in
EXTRA_CFLAGS from Makefiles being overwritten, obviously breaking the
build. This patch converts to them to the newer ccflags-y which also
fixes the problem.
Change-Id: I6309439599d4c9cc184f9ecd941bde841982ef07
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Updates sample projects to ensure that fiber stacks are properly aligned by
using the __stack tag.
Change-Id: I4f92033571d65aa87b6d46da5d7cb6d92eadc27a
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The length of time it took for the microkernel's test_fp_sharing test to run
was occasionally causing issues with sanity_chk. The test would take close
to five minutes to finish and sanity_chk has a five minute timeout for the
tests. To resolve this, the number of iterations for which the test executes
has been cut in half (from 1000 to 500).
Change-Id: I171b96f6af81a8b08d0367beecab536f16d1ca7e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Future commits will prevent task_timer_alloc() from returning
INVALID_OBJECT.
Change-Id: Ib7ec2e0fafb625223d762d73f15c128f134169b3
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The number of timers in the system is no longer configured via the VPF, but
rather through the kconfig option NUM_TIMER_PACKETS.
Change-Id: I58a4b3009e183a9d04e3618418baa73ed296d0af
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Eliminates the need to reserve the "kernel_" prefix in the
kernel namespace. Also, aligns versioning with other APIs
that are neither nanokernel_ or microkernel-specific, such
as the system clock APIs.
Change-Id: I81e43cd03849b45a4b432b0875dc8b1d5862dba9
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Since the kernel now provides a minimal string library, there is
no longer any reason not to use the standard memset() and memcpy()
APIs.
Change-Id: Iad587ace6f41fd94c9c961d13d9322495a7da1be
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
These routines are either unused, or are always used in manner
that does not require their added security checking.
Change-Id: I6f484924ebc3d395a20879445a2fcabebf6c5014
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Test project is no longer needed, since the associated library
is now scheduled for removal.
Change-Id: I843018e647c4bdc82c785ae21dbfa9de608c0d50
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Renaming the directory include/nanokernel to be include/arch, which
better reflects the real nature of the directory and the contents
inside.
Change-Id: I2bc33ebc6715e2f0403227a558279fdf52398ade
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
This commit enables the outdir directory.
Kbuild output files will be generated at the outdir directory
inside the project directory.
Change-Id: Icec04aca1753326c9d50dea20c71850c1d8c3dd0
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit fixes an issue with the boot_time sanity check
when tested for minute ia processor.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Ia5be3ceaf71114412819bac131b71686d775c6ca
This commit changes the build parameter CONF_OVERLAY with the
name CONF_FILE.
Change-Id: I404a4aa87b167a9ca4e7b395d53c2f7794b232bc
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit fixes a kconfig dependency in the nanokernel boot_time
sanity expert test.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Ieb5c3c2033045a7db0382298ade8427cf31d713a
This commit removes the TIMO_BASE setting from the sample
Makefiles.
Change-Id: Iff487ecb1e412e379528cca520470f87123cf4b4
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit adds the Makefiles to add sanity checks for
the bluetooth driver.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Iadfe6eb2662347a981393ffeb3e343f32c5f67f0
It seems CONFIG_PERFORMANCE_METRICS is needed for this
test to build, so enabling it.
Change-Id: Iafc0be794f0931b33bcef2ba3ace56ee88f75258
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit updates the source Makefile for test_fp_sharing.
Change-Id: Iab70d6fb3b17b8e078549130b10c6c9c8a956b73
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit updates the dependency symbols needed in the
nanokernel config overlay files.
Change-Id: I838b76aefa79e6079b4c8420125c7e711b6441d7
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit updates the dependency symbols needed in the
microkernel config overlay files.
Change-Id: I0a846956a7d0d6aaa93cd4bf11ba3853f6301220
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit adds all the root Makefiles needed by the
microkernel sanity tests.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I7a267a180ba617ce95a499dcf2782630273e8566
This commit adds all the root Makefiles needed by the sanity tests.
Change-Id: I7ef21d0bcd2c383218d600d291111861fe307abd
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit updates the list of files that compose the
benchmark-latency measure test.
The raise_int.c files is copied from the test: test_task_irq
because there is no clean way to reference this source outside
of the project in Kbuild.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I20d5cdd042ba35945d213e49e80004e886bfdc6e
This commit fixes the include path for the nanokernek
benchmark test.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I639126b7fcfe82357f166c602049bc09f195c103
The following commits adds the main Makefiles for the nanokernel
benchmark test, using parameters to be used by the sanity check.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Ia7789ce83a1b6a62805a15fead57a1737a856c2c
The following commits adds the main Makefiles for the microkernel
benchmark test, using parameters to be used by the sanity check.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I7601df92006ca81b3680f6c2b4e25de076512e41
This commit adds the EXPERIMENTAL ksymbol to the configuration
snippets used by the benchmark tests.
Some configurations options in the snippets have dependencies
agains this ksymbol.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Ia714e913777a697cc8b1eafa0fc097496b5972c5
This commit adds the parameters to the Makefile.kbuild for
micro and nano kernel apps samples.
This prepares the sample apps to be used by the sanity check.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I7636f0375493e12b4604f6fb6c4b6100d2c6604c
This commit adds all the Makefiles needed to integrate the benchmark
testing in the Kbuild system.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I7b29cf7839e95b94acc27a45677a067ca5a0c00d
This commit fixes an issue with the Makefile describing the
philosophers demo.
Change-Id: I5502e207aa5d87c04e58daa2d391e2d89ba91a67
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit adds Makefiles for each sample test in the project.
The Makefiles integrate the test samples into the Kbuild system.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I8d84756836c1f7d00dc823d7ff76334c75304d66
This commit adds the capability to the Kbuild system of adding
samples and projects to the build process.
This commits adds the hello_world and philosophers sample code
as an example of how to configure a project into the build
system.
The project can be hosted inside the kernel source tree or
outside the kernel source tree.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Id980e959ac6e0061f8227d5d81191a169bfc8fc3
An extended inquiry response or advertising data packet shall not contain
more than one instance for each Service UUID data size.
Change-Id: I41d1a25fdcb2987e8d0cadfb2110fd62b3685f17
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add Battery Service along with its characteristics and descriptors
to the database table.
Change-Id: Ifb83ebcb4d6cdafa5df84d643b2e2a69e5a6c1e3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add Heart Rate Service along with its characteristics and descriptors
to the database table.
Change-Id: Ibff52da7352883edccb7c5b903538a81aad2ba55
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds attributes for Generic Access Profile.
Change-Id: I1fe08429f80341e7ba9fc06ef35a6df9b5abbf84
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Length of "Test beacon" is 11 + 1 of type that should be 12 not 16.
In addition to that make the data variable static since they are only
used locally.
Change-Id: I2d7fb16cf7d383dafc9b083da6cd63a4d9be21c0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There's no point in enabling BLUETOOTH_DEBUG_HCI_CORE for the samples
as the user/developer is unlikely to be interested in this specific
sub-module of the Bluetooth stack. The samples already have the
BLUETOOTH_DEBUG enabled, so leave it up to the user/developer to
decide if they want to add specific sub-module debug options.
Change-Id: I327086464561667a2462db0aab00d0ffcdd40d4c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Build peripheral app for targets: pentium4 and ti_lm3s6965
Change-Id: Id98c94217ad39e1716b8f8bc6031b8814bae06f3
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Update the includes in the sample apps to match what their actual
dependencies are.
Change-Id: I6fdfa4ba0cda563433d51f0ec35fef8f2ee0fa40
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
1) Now invokes pipe routines directly, without the use of function
pointers.
2) Eliminates unreferenced _DEVICE_CHANNEL symbol.
Change-Id: I6e26476265ed8f33febb5a06c9d03daf7147ee5e
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Keys off variations of "ICC" to remove references to the Intel C Compiler as
it is not supported.
Change-Id: I09f67880b39839982ed1c450e564c274440628a5
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This project requires access to non-public kernel structures
for testing purposes.
Change-Id: Ibfa119b99bda170498503cdbbee6b98f5cf41f54
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The initial memcmp implementation was buggy, so to have at least some
sort of sanity testing of the implementation add a test case for it to
test_libs.
Change-Id: I9e1a48e4b646e80258c1689dde2461a6134dddf8
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The variable task_irq_object is global because the test_task_irq project
needed to access it. That data should only be accessed through the API.
To make the variable local, break that dependency to the test project
and restrict the access to the variable.
Change-Id: I1ccb21625d456714a038e0374d124b42aa72e577
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Fixing the folling whitespace issues:
- SPACE_BEFORE_TAB : We should not use white spaces before tabs to alignment.
- TRAILING_WHITESPACE : Lines should not end with a white space.
- QUOTED_WHITESPACE_BEFORE_NEWLINE : Removing unnecessary whitespace before a quoted newline.
Change-Id: I024e8d39164c5e5e9d8370f3499d21b49147feee
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
The 'else' statement should be in the same line that the
close brace of the 'if' statement. E.g.:
if (condition) {
do_this();
do_that();
} else {
otherwise();
}
This commit fixed this kind of error using the following script:
#!/bin/bash
for file in $(find ./ -name "*.[ch]" ! -path "./scripts/*" ! -path "./host/src/wrsconfig/*");
do
if [ ! -h $file ];
then
sed -i '/^[ \t]*}$/ {
:review_next_one_too
N
s/^\(.*\)\n[ \t]*else/\1 else/
/}$/ b review_next_one_too
}' $file;
fi;
done
Change-Id: I7e811a572d735fa08e84850055ebbde29eb10e8d
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
There should be a whitespace between the 'if', 'for' and 'while' statements
and the open brace. this commit fix this kind of error.
Change-Id: I4bae17d98f8ec8b698d40253a9a4c873111a8904
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
There is no longer a reason to expose information about the
internels of the microkernel's event subsystem to application
files.
Note: The one sample project that tests event processing now
explicitly declares any non-public event APIs in requires.
Change-Id: I4c3f85a7b0bc485713c21424a923102b4f400ced
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Line's length should be shorten than 100 characters. This commit
fixes these lines separating them into two parts.
Change-Id: Ic68c9086866cd778187aa1465470acc0485e2271
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Some checkpatch issues were solved by scripts leaving other problems
such as alignment and indentation issues. In order to comply with the
defined coding style the following fixes were made:
- Fixed the function declaration moving the parameters' comments above
the function in accordance to the doxygen format.
- Fixed functions' opening and closing brackets. These brackets should
not be indented.
- Fixed the 'if', 'for' and 'while' statements adding the brackets
around the sentence.
- Fixed comments' alignment.
- Fixed indentation.
The work was done manually and submitted as one commit. I didn't
separate these changes in different commits because they were fixed all
at once. Basically, all errors were fixed in every file at once.
Change-Id: Icc94a10bfd2cff82007ce60df23b2ccd4c30268d
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
This commit fixes the issue marked as SPACING by the checkpatch script
deleting the whitespaces between the function name and the open parenthesis.
Change-Id: I972b1646904bf6e1131263f94ab5024a528ae07d
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Use scan functionality by simple app that starts LE scan
and in a while stops it.
It uses basic HCI scan interface prepared for
supporting LE central role feature.
Change-Id: Idcde4c742290d46931ab86522e51b0fc547a2d42
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Set the toolchain in case the user doesn't have it set in their
environment.
Change-Id: Ia961598bc125ded9326747cc8c5810635a8481d5
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Enabling HCI_CORE debug helps to identify possible bugs.
Change-Id: I13df39d63ee9b15f83503d86edc71733c7db94d5
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Allowing to redefine QEMU_EXTRA_FLAGS helps to overcome user channel
stuck cases, you still have the possibility to use bluetooth over tcp
by specifying QEMU_EXTRA_FLAGS="-serial tcp:...". Default behavior
remains the same though.
Change-Id: I3a8190a1ca04029e788bfd424f3b3a3be9f2af75
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Bluetooth regression and system regression would run compile test
for shell app.
Change-Id: I029772483e7aa9ac0717db760d8de1f6be3371b5
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add support for nanokernel build for shell application.
Change-Id: Idf5f3673050c2ac4c941dc9164536fc487e9216b
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Remove old way of starting qemu target and add extra information.
Change-Id: I37c378aa0eb873b3fc16362991eec8a6b661626b
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Bluetooth shell sample application make use of serial console shell
and register Bluetooth commands to it. It shows example how console
shell might be used.
Change-Id: I98340422b90e85dc7a2c44823536121999a08952
Co-authored-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
It is not necessary to add any PRJ_INCPATH in order to build Bluetooth
samples.
Change-Id: I3ddb0a645e475d937a7067059e8bf5caa783a04e
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Adds a sample which initializes Bluetooth and enables non-connectable
advertising (i.e. starts acting in the LE broadcaster role).
Change-Id: Ic554b1354464b357b44215af1c0b613f123aeb5d
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
bt_regression scripts builds all listed projects for all
configurations mentioned in the PRJ_LIST. For targets specified with
"!" it executes test in qemu.
Change-Id: I971a797b2a89547bb14208d0d43d1a36597bad52
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add new targets for sanity_chk script: fsl_frdm_k64f and ti_lm3s6965,
this would add compile tests for mentioned BSPs in sanity check
script.
Change-Id: I556f8e3a5048d2a58ab09b10197e0cc6fb3c8765
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add ti_lm3s6965 and fsl_frdm_k64f targets for bluetooth test.
Change-Id: Ibbe8ebbab72abb02505f47a82c904f0e9460e812
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add ti_lm3s6965 and fsl_frdm_k64f targets for bluetooth test.
Change-Id: I054c9500511fe40969127445444f85f3fe85902c
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Extend bt_start_advertising to make it possible to add any data type
instead of just the name.
Change-Id: I3f2afe1eb64aec51f321f7fd7439e97b3d67374c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Hides the existence of _task_nop() from everyone but the
microkernel's no-op subsystem itself. (This change forces the
sample benchmark project that measures no-op performance to
explicitly declare this API itself.)
Change-Id: I0cb2ec32d1c56b10743d5b2e727de2d5a99c95ea
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This is renaming the current stringTest to a stringMemsetTest as a
start to adding in all the other string tests that are currently
not covered.
Change-Id: Ic8fb9263e5588fe16a2cadbec24ffc0565c8224b
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Currently these tests are disabled in the regression_chk
application.
Change-Id: Ibf53b25a08201db0b50df7dca96f638b419ea4a8
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
All the other test_* functions have recently had this added in.
Bringing this in to be consistent with the other functions.
Change-Id: If8adf58a82445f6b509015c56937353fab79d823
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
After the tree re-structuring, several of the files that the test_libs
functions use are no longer valid, from headers to functions. Updating
to run on the current lay of the land.
Change-Id: I3359a782f5ae8faa7909a13a4cca47f82c22797f
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Spaces between the function name and the open parenthesis are not allowed.
This commit fixes the case where only one open parenthesis with leading
whitespaces is present in the line.
#!/bin/bash
checkpatch_script="$VXMICRO_BASE/scripts/checkpatch.pl --mailback --no-tree -f --emacs --summary-file --show-types --ignore BRACES,PRINTK_WITHOUT_KERN_LEVEL,SPLIT_STRING --max-line-length=100 "
for file in $(find ./ -name "*.[ch]" ! -path "./scripts/*" ! -path "./host/src/wrsconfig/*");
do
# fixing spaces between function name and open parenthesis
for line in $(eval $checkpatch_script $file | grep "WARNING:SPACING: space prohibited between function name and open parenthesis '('" | cut -d":" -f2)
do
echo "$file : $line"
sed -i ''$line' { /[ \t](.*[ \t](/ b skip_it s/[ \t]*(/(/ ; :skip_it }' $file;
done;
done;
Change-Id: I1e026eaee930e297374e5f2f725b78f29824dee3
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Changing each four whitespaces for one tab at the beginning of the
lines that the checkpatch script marks as having the warning LEADING_SPACE.
Change accomplished with the following script:
#!/bin/bash
checkpatch_script="$VXMICRO_BASE/scripts/checkpatch.pl --mailback --no-tree -f --emacs --summary-file --show-types --ignore BRACES,PRINTK_WITHOUT_KERN_LEVEL,SPLIT_STRING --max-line-length=100 "
for file in $(find ./ -name "*.[ch]" ! -path "./scripts/*" ! -path "./host/src/wrsconfig/*");
do
for line in $(eval $checkpatch_script $file | grep "WARNING:LEADING_SPACE" | cut -d":" -f2)
do
sed -i -r -e ''$line' {s/^ /\t/; s/^([\t]*) /\1\t/g}' $file;
done;
done;
Change-Id: I999e59710f52098ad3ec336b99c05356215cc671
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
The open braces of the 'if','for', 'while' and 'do' statements should be at the end on the
same line of the statement to comply with the defined coding style. E.g.:
if (x is true) {
we do y
}
Change accomplished with the following script:
#!/bin/bash
checkpatch_script="$VXMICRO_BASE/scripts/checkpatch.pl --mailback --no-tree -f --emacs --summary-file --show-types --ignore BRACES,PRINTK_WITHOUT_KERN_LEVEL,SPLIT_STRING --max-line-length=100 "
for file in $(find ./ -name "*.[ch]" ! -path "./scripts/*" ! -path "./host/src/wrsconfig/*" ! -path "*/outdir/*");
do
if [ ! -h $file ];
then
# obtaining the line's number where the error is reported in a reversed order
reversed_lines="";
for line in $(eval $checkpatch_script $file | grep "ERROR:OPEN_BRACE" | cut -d":" -f2)
do
reversed_lines="$line $reversed_lines";
done;
# fixing the issues in reverse order due to lines can be deleted affecting futher lines
for line_reported in $(echo $reversed_lines);
do
# search for the line where the open brace is
char_found="";
let line=$line_reported-1;
while [ ${#char_found} -eq 0 ]
do
let line=$line+1;
char_found="$(sed -n ''$line' { /{/ p }' $file)";
done
let statement_line=$line-1;
let brace_line=$line;
# condition to avoid modifying lines that ends with the character "\"
char_found="$(sed -n ''$statement_line' { /\\$/ p }' $file)";
if [ ${#char_found} -eq 0 ];
then
# fix the issue
echo "$file : reported on $line_reported (found on $brace_line -> moved to $statement_line)";
sed -i ''$statement_line' { s/[ \t]*$//; s/\([ \t]*\/\*.*\*\/\)$/ {\1/; /{/ b already_done s/$/ {/; :already_done }; '$brace_line' { s/{[ \t]*//; /^[ \t]*$/ d }; ' $file;
fi
done
fi
done;
Change-Id: I517c40bb33840ef531f2319354350f578b238abb
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Instead of having custom helpers (like NELEMENTS) for evaluating the
array size avoid the code duplication by using the now available
ARRAY_SIZE macro.
Change-Id: I40e2e55bd4a68e3d24854c12086432aa17ce1abe
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I5c4719458d7bb90af2ba21594deed6885f958d34
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Id3f9096f28a1bf98035c6a531cd8d2dc66e6448a
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
A number of fibers pend on a LIFO, then the task queues data on it, once
for each waiter. Each time, the first fiber in the queue wakes up, is
context-switched to, verifies the data is the one expected, and gives a
semaphore. The task finally must be able to obtain the semaphore an
amount of times equals to the number of fibers.
Change-Id: I2709ec56368fc72d365bd752657fb319a9b6c394
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
A number of fibers pend on a semaphore, then the task give the semaphore
once for each waiter. Each time, the first fiber in the queue wakes up,
is context-switched to, and gives another semaphore. The task finally
must be able to obtain the second semaphore an amount of times equals to
the number of fibers.
Change-Id: I36bcd6f5b1b0df73fdb35c2dbbbc639fec9dbae8
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Change _nano_ticks to 64-bit with the functions that operate it
for the consistency with microkernel.
Introduce *_tick_delta() functions that return 64-bit value
and *_tick_delta_32() that return low 32 bits.
Change-Id: Id02c9f4b2b5c309ad9aa0a82bb7f4330af7e34a3
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
In order to better support different compilers, each test that
uses inline assembler, includes a compiler specific header file
that contains the proper code.
Change-Id: I7e2e27a0663501f934a5bb3539f7e23670a1e755
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
These options are no longer required as malloc-type support has
been previously eliminated.
Change-Id: I93fdb93395bc53c8a550a64fa61a7339d74ba278
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This renaming will impact the following functions:
nano_node_tick_delta
task_node_tick_delta
Change-Id: I5d3fdfe0121674d88b8f3d8777150b2242b88d1a
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
We no longer support the concept of nodes.
This will impact:
task_node_cycle_get_32
isr_node_cycle_get_32
nano_node_cycle_get_32
This change also updates the nanokernel test API to work with the change.
Change-Id: I68de883b07d4775b09fda13e503c040b3f14baa7
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
We no longer support the concept of nodes. This will impact the following
functions:
task_node_tick_get_32
isr_node_tick_get_32
nano_node_tick_get_32
Change-Id: I27184c76516da16a0c3f335656f9efcee2fb549d
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
This enables debug for HCI_CORE for samples.
Change-Id: Ide0b3c3db0165a5d00439a7bd05fb516bf67a2f5
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Enable CONFIG_BLUETOOTH_DEBUG option for Bluetooth samples.
Change-Id: Id0d0377082b16f78f15c5e968c866bed2df69844
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add nanokernel configuration to build Bluetooth init sample. Later on
sample would added to sanity check builds.
Change-Id: Ib7251c1b3f5d62c4f1e0bb1fba253ebb1e9342df
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The test registers Bluetooth driver to Bluetooth the subsystem and
runs bt_init() which calls open() callback. We return expected error
to indicate that there is no real Bluetooth device attached.
Change-Id: I39526acbb25e7d4bb322d4511659a40505874592
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The test registers Bluetooth driver to the Bluetooth subsystem and
runs bt_init() which calls open() callback. We return expected error
to indicate that there is no real Bluetooth device attached.
Change-Id: I1b324c82ce8be2ce73f2b41a07135b0bc76eed61
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This patch adds a simple app which initializes Bluetooth and enables
connectable advertising (i.e. starts acting in the LE peripheral
role).
Change-Id: I15bb43ce657b5592d32187a0dfd22ba8bd912641
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Revises the nanokernel footprint benchmark project so that the
minimum x86 configuration explicitly excludes support for the
system timer. (This doesn't actually save any memory, since timer
support was already being excluded; however, the project now makes
this lack more apparent, and does it the same way as the minimum
microkernel benchmark project does it.)
Change-Id: I509994bb640fee3208e4c1397a79cd134172370a
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises the microkernel footprint benchmark project so that the
minimum x86 configuration excludes support for the system timer.
The resulting "tickless kernel" image is about 1200 bytes smaller
(about 15%).
Change-Id: Ie7be8427963818c7d0d75173d3da844722487f0b
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Benchmark code that depends on the state of LITE-related symbols
has this dependency removed, and is now coded as if these symbols
are not defined. This change has no operational impact, as LITE-
related symbols were never defined.
Change-Id: I9b9a108223903b8e4dd675a599ca5b8e5cbe7fc7
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
By default, the kconfig option SECTION_GARBAGE_COLLECTION is already enabled.
Removing this option from the project configuration files does not change the
resulting images.
Change-Id: I0f3329aa15a341c2c1082f75162b2b3e12447a26
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Explicitly configures the number of task priorities for sample
projects that require more than 16 priorities. (This ensures
that the projects continue to work properly when the default
value of NUM_TASK_PRIORITIES is reduced to 16 in an upcoming
commit.)
Change-Id: I03b9ae68a6b782c62c8799f44d17e659e7d6074e
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises the microkernel footprint benchmark sample projects to take
advantage of the NUM_TASK_PRIORITIES configuration option. Most
notably, this reduces the size of the minimum microkernel configuration
by over 500 bytes.
Change-Id: I2be1b0a5a09800559df4d1bf355de38d6c0b9ab3
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Removes the assignment of kconfig option CONFIG_CPU_CLOCK_FREQ_MHZ from
boot_time project configuration files that redundantly set it to the default
value (20).
Change-Id: I901b2d4dc85d1de53dc4a1809b422ee16301ac03
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Simics is not supported. As such, the sample project README.txt files must
not provide instructions on how to execute an image using Simics.
Change-Id: I6cc09169902b5e10f50799c280d0bbc63f1ae624
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
All uses of TC_END are functionaly equivalent to each other
and to the TC_END_RESULT macro. Change TC_END to TC_END_RESULT
so that they are consistent. In the future when TC_END_RESULT
is extended/expanded, it only has to be done in one place.
Change-Id: I61bad52098187f6115896688e0a545d202b6fd05
Signed-off-by: David Norris <david.norris@intel.com>
most places call TC_END_RESULT before calling TC_END_REPORT.
These new calls to TC_END_RESULT are added so it is used
consistently in the microkernel tests.
Change-Id: I1125662c47a487b1bf4054d63ee2b9dc314a253e
Signed-off-by: David Norris <david.norris@intel.com>
These options are now enabled by default.
Change-Id: Ie7f2abb7b7c89f1a5a02ddc831367710a3d72c1f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Revises ARM M3/4 ISR installation project, which doesn't actually
require the GDB_INFO capability.
Change-Id: I9eefba5678e2c4a0fa7a8e57df603d25af144eb1
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises boot time benchmarking project so it doesn't utilize the
CONTEXT_MONITOR capabililty, which is still [EXPERIMENTAL] and thus
could result in potentially misleading results.
Revises ARM M3/4 ISR installation project, which doesn't actual
require the CONTEXT_MONITOR capability.
Change-Id: I45d2abe85a0049b0c745652d2e78210c9696016d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises this option to make its purpose clearer, and to align it
with other experimantal monitoring-type configuration options.
Change-Id: I593bb7560b5a0544eb05affaa07b59dd78ea907e
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This patch adds a very simple application for demonstrating the use of
the bt_init() API. Right now this is just tested to work with qemu and
the HCI UART driver with the help of the btproxy tool on the host OS
side. More information is available in the samples/bluetooth/README
file.
Change-Id: I03f92d158e9e5d57275241502bb8fa94350fc335
Co-authored-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I4b7f7806fcfcbeed1abbc2421c3fc470af87eb7d
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Idcd3b4dfd86b6e835638623fa7b39401cabdee06
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
VisualDSP is not supported. Furthermore, with the removal of the VisualDSP
comment, there is no longer any justification for the custom BENCH_MIN() macro.
Thus, it is simply replaced with min()--defined in "util.h".
Change-Id: I3c08add1fc9fcd98c388b843c5849fc71fa84fd3
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The task_mem_pool_moveXXX() routines are only relevant to multi-node systems.
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Change-Id: I575c32a74b158c8b9b6ac6e1baef7b0e4f988270
The routine _task_mem_pool_move() is only relevant to a multi-node system.
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Change-Id: I1a97e2b87d29df7a1a63bcd6d8eea290382f3a7e
Fix benchmark projects makefiles to use i8253 specific configuration
for only two variants of generic_pc BSP - pentium4 and minuteia, but
not for the whole BSP.
Change-Id: Iac89e29d2e26ee411d9c2d2fbcd3335c0e71fb06
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Move time calculation macros from application directory to kernel
directory, since it is used by a kernel component.
In order to follow namespace and naming conventions, convert
macros to SYS_CLOCK_HW_CYCLES_TO_NS* form.
Change-Id: I96e9149c399adc363aed5095ae82a1abc78d2977
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
"Unsupported stdlib" functionality is not relevant to the current "minimal"
libc implementation.
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Several sample project tasks that are not to be automatically
started now indicate this by simply specifying an empty task
group list, rather than by defining and using a new task group.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Instances of the custom OFFSET() macro are replaced with the standard
offsetof() macro from stddef.h to reduce code duplication.
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adding a line after variable declaration in order to comply with
the defined coding style.
Change-Id: Id41af88404bd37227bfd59a2d71ce08d0d6ce005
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
This commit changes the pointer's location in order to comply with
the defined coding style.
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@linux.intel.com>
Change-Id: Ibcf1ef0e4fc53b0cb5286b36119e76d017f24cd9
This commit adds the parameter to the reference of the extern function in order to
avoid the checkpatch issue ERROR:FUNCTION_WITHOUT_ARGS.
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@linux.intel.com>
Change-Id: I42c53314232622a8e2e615420584601ce9b85404
This commit fixes the coding style of the 'if', 'do', 'while' and 'for'
statements in order to comply with the defined coding style.
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@linux.intel.com>
Change-Id: I70d002462db48f36b9589cdb229ba928f3f424b4
This commit fix the return statement in a void function due to this is not useful.
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@linux.intel.com>
Change-Id: Icae7892853ed1c6c56c18e0c0c8f8fd1610491ee
This commit deletes the exceeded spaces after #ifdef declaration on the line that
the checkpatch script mark as having the SPACING error in order to complay with
the defined coding style.
The script used to perform this fixes was:
checkpatch_script="$VXMICRO_BASE/scripts/checkpatch.pl --mailback --no-tree -f --emacs --summary-file --show-types --ignore BRACES,PRINTK_WITHOUT_KERN_LEVEL,SPLIT_STRING --max-line-length=100 "
cd $VXMICRO_BASE;
for file in $(find ./ -name "*.[ch]" ! -path "./scripts/*" ! -path "./host/src/wrsconfig/*");
do
for line in $(eval $checkpatch_script $file | grep "ERROR:SPACING: exactly one space required after that #ifdef" | cut -d":" -f2)
do
sed -i -r -e ''$line' { s/^#ifdef[ \t]*/#ifdef /g }' $file;
done;
done;
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Change-Id: Ic9bb67243f91fa3b5aca6288b306f9b4e8c816fe
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit deletes spaces after open parentheses '(' and spaces before
close paratheses ')'.
This modification were done with the following script:
checkpatch_script="$VXMICRO_BASE/scripts/checkpatch.pl --mailback --no-tree -f --emacs --summary-file --show-types --ignore BRACES,PRINTK_WITHOUT_KERN_LEVEL,SPLIT_STRING --max-line-length=100 "
cd $VXMICRO_BASE;
for file in $(find ./ -name "*.[ch]" ! -path "./scripts/*" ! -path "./host/src/wrsconfig/*");
do
# fixing spaces after open parethesis
for line in $(eval $checkpatch_script $file | grep "ERROR:SPACING: space prohibited after that open parenthesis '('" | cut -d":" -f2)
do
sed -i -r -e ''$line' { s/\([ \t]*/\(/g }' $file;
done;
# fixing spaces before close parethesis
for line in $(eval $checkpatch_script $file | grep "ERROR:SPACING: space prohibited before that close parenthesis ')'" | cut -d":" -f2)
do
sed -i -r -e ''$line' { s/[ \t]*\)/\)/g }' $file;
done;
done;
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Change-Id: I4482fc50ec45542afa2e60c5f2fef4e75fb24dd3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit fixes the coding style of the function declarations and aligning
the open and close brackets and change the style of parameter's documentation.
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Change-Id: I648d36eb29dafc7fcd87b8db01e682bea993e5d2
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Updating nano kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
QA related scripts should be either maintained out
of the tree or come as enhancements to the sanity check
scripts.
Change-Id: I6dceed81f66b84cedad2dd84fd42d6b388de3468
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
