Channels owned by a child core shall also be included in the mask of
used channels (channels that cannot be allocated by the GPIOTE channel
allocator).
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
This commit aligns the GRTC driver to changes introduced in
hal_nordic. Some of the features regarding GRTC sleep/wakeup
functionality has been modified and moved out to the nrfx
driver's code.
Signed-off-by: Adam Kondraciuk <adam.kondraciuk@nordicsemi.no>
On SoC like nrf54h20 GPIOTE channels are split between cores. They
are reserved at compile time in devicetree. We need to ensure that
dynamically allocated channels are used only from pool assigned to
the given core. This is done using NRFX_GPIOTE130_CHANNELS_USED mask
which contains data from the device tree.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Fixing a bug where wrong instance was enabled when SPIS137 was supposed
to be used.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
This definition is no longer supported by the nrfx_gpiote driver (since
nrfx 3.2.0, reserved channels need to be defined per GPIOTE instance),
so remove it to not mislead users.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The new kconfig options intend to represent a final
nRF54L product, let's handle them appropriately.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Two Kconfig symbols were tied to a board-specific DT nodelabel - namely
the `NRFX_UARTE_CONFIG_RX_CACHE_ENABLED` and `UART_<n>_RX_CACHE_SIZE`
were tied to `shared_ram3x_region` - but this is not necessary.
That DT node is where the UARTE driver RX/TX cache buffers are placed
in the default nRF54H20 DK memory map, but on another board, they could
be located somewhere else.
The exact memory sub-regions used for this purpose are indicated using
the `memory-regions` property on each UARTE instance, which should be
generic enough already, so let's use that instead.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Add Kconfig-to-nrfx symbol redefinitions so that TWIS instances
found on nRF54H20 and nRF54L15 devices are supported.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
This definition is used in nrfx header files, so it shouldn't be added
using `zephyr_library_compile_definitions()`. This would cause the GRTC
driver to fail the build when CONFIG_NRF_GRTC_START_SYSCOUNTER=y.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
DT nodes and compatible had been renamed and Kconfig option was relying
on the names that do not exists.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Iterate over all instances to get the information about extended
feature support in SPIM driver.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add Kconfig-to-nrfx symbol redefinitions so that PWM instances
found on nRF54H20 and nRF54L15 devices are supported.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
Add nrfx_grtc related entries that were introduced in nrfx 3.4.0,
especially NRFX_GRTC_CONFIG_AUTOSTART that should be by default
set to 1.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
NRFX_IRQ_PRIORITY_SET is defined as empty. This causes an unused
argument warning in many callers (e.g. nrfy_gpiote_int_init). Fix it by
using ARG_UNUSED for the priority argument.
Signed-off-by: Marco Widmer <marco.widmer@bytesatwork.ch>
We will touch these lines in the next commit. Convert the comment style
to C89 instead of C99 and the indentation to tabs instead of spaces.
Signed-off-by: Marco Widmer <marco.widmer@bytesatwork.ch>
Add support for propagating SOC_NRF54LX_DISABLE_FICR_TRIMCNF and
SOC_NRF54LX_SKIP_GLITCHDETECTOR_DISABLE values to nrfx.
Signed-off-by: Magdalena Pastula <magdalena.pastula@nordicsemi.no>
- add new entries that appeared in nrfx 3.4.0
- correct the default IRQ priority value for PPR (it is intended to be
the lowest prority, so unlike for ARM cores, for RISC-V it should be
the lowest value)
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Include into compilation the nrfx_gppi_dppi_ppib helper and related
interconnect layers when DPPIC nodes are enabled in DTS. Provide macro
definitions required by those interconnect layers based on information
from devicetree (the nrf_grtc_timer is only modified because a macro
that it uses became more generic).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
For use nRF 802.15.4 Radio Driver on nRF54L series there is
necessary update for nrfx_glue.h file. It follows the pattern
used for other nRF family members.
Signed-off-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
Add nrfx configuration file to make the nrfx HAL work for
nRF54H PPR core.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Extend Kconfig definitions and nrfx_config translations so that UARTE
instances that are available in nRF54H20 can be used.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This CMake variable contains a path to a CMSIS-SVD file from nRF MDK,
which describes the selected Nordic SoC.
Initially, this will be used as an argument to nrf-regtool.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Add nrfx and Kconfig related infrastructure plus SoC initialization
code to allow building for nRF54H20 targets (Application and Radio
cores).
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Move code that prepares `NRFX_CONFIG_GRTC_*` definitions based on
information from devicetree from the nRF54L15 nrfx_config header
to the global one, so that the code can be used by nRF54H20, too.
The checks that validate owned-channels and child-owned-channels
DT properties are moved to the nrf_grtc_timer driver so that
the global nrfx_config is not polluted unnecessarily.
The default values in nrfx_config_nrf54l15_enga_application.h
are restored to those from the corresponding template file.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
... to cover missing __ICACHE_PRESENT and __DCACHE_PRESENT symbols that
should be defined in MDK files.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Updated API version enables multi-instance GPIOTE driver.
Additionally obsolete symbol that was used to specify
API version in the past was removed.
Affected drivers have been adjusted and appropriate changes
in affected files have been made.
Signed-off-by: Jakub Zymelka <jakub.zymelka@nordicsemi.no>
Added GPIOTE0, GPIOTE1 instances for legacy devices,
GPIOTE20, GPIOTE30 for Moonlight and GPIOTE130,
GPIOTE131 instances for Haltium.
Signed-off-by: Jakub Zymelka <jakub.zymelka@nordicsemi.no>
Introduce possibility to override `NRFX_DIR` sybol from hal_nordic's
CMakeLists.txt file that specifies source dir for the nrfx drivers.
Signed-off-by: Adam Wojasinski <adam.wojasinski@nordicsemi.no>
This commit is a part of introduction of new WTD instances.
It adds new Kconfig symbols that can be used in WDT shim and
nrfx driver.
Signed-off-by: Adam Wojasinski <adam.wojasinski@nordicsemi.no>
Change makes EGU instance used for anomaly 109 workaround configurable.
The default EGU instance (5) may be used for other purpose.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>