Add a driver for the National/TI LM95234 Quad Remote Diode and Local
Temperature Sensor with SMBus Interface and TruTherm Technology.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Add driver for Festo VEAA-X-3 series proportional pressure regulator.
The driver assumes that the maximum ADC value matches the maximum
output from the device, and that the maximum DAC value matches the
maximum input value for the device. External hardware is probably
required between the ADC/DAC and the device.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
1. Add functionality for upload and download fingerprint
template data of the R502A fingerprint sensor device.
2. change data type for data_len parameter of
transceive_packet function to uint16_t as it may hold
value 256 for dowload template data to sensor.
Signed-off-by: Dinesh Kumar K <dinesh@linumiz.com>
Removed fps_enroll, fps_search and fps_delete from
driver code, since they did application usage inside
driver. add the following attributes to achieve the
above functionality from application.
1. SENSOR_ATTR_R502A_CAPTURE
2. SENSOR_ATTR_R502A_TEMPLATE_CREATE
3. SENSOR_ATTR_R502A_RECORD_ADD
4. SENSOR_ATTR_R502A_RECORD_LOAD
5. SENSOR_ATTR_R502A_COMPARE
Signed-off-by: Dinesh Kumar K <dinesh@linumiz.com>
Implement a sensor for the output diagnostics of the power train
switch TLE9104.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Add driver for Angst+Pfister O2 sensors FCX-MLD25 & FCX-MLD95 and maybe
more. Tested with FCX-MLD25.
Supports get O2 value, get status, and power management.
Note that in suspended power mode heating output is at 20 %, thus
probably not suited for a battery powered device.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
Implement a sensor for the output diagnostics of the low side
switch BD8LB600FS.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Add driver for ScioSense ENS160 multi-gas sensor. The driver includes
support for I2C and SPI, attributes for setting temperature and
humidity compensation and data ready trigger.
Also add ScioSense to the list of vendor prefixes.
Signed-off-by: Gustavo Silva <gustavograzs@gmail.com>
Add the white light channel to the
veml7700 sensor to allow for correction
of light sources with strong infrared
content.
Signed-off-by: Jeff Welder <Jeff.Welder@ellenbytech.com>
This commit adds source and header files required for bmp581 I2C driver.
I have used bmp581_user.h to add more usage related definitions
but bmp581.h to add hardware related definitions.
Signed-off-by: Talha Can Havadar <havadartalha@gmail.com>
Signed-off-by: Gerhard Jörges <joerges@metratec.com>
This CL uses BUILD_ASSERT macro to check whether `thr-sel` is out of
range instead of using NPCX series definitions.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Add `thr-sel` prop. to select the relevant threshold register for adc
comparator since there're two adc modules in npcx4 series.
Signed-off-by: Kate Yen <htyen@nuvoton.com>
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Initial sensor driver for NPM1300 PMIC charger.
Includes basic configuration of charger voltage and current.
Signed-off-by: Andy Sinclair <andy.sinclair@nordicsemi.no>
Add binding and sensor attribute to allow single phase
mode where only one signal is required from the encoder.
The signal must be connected to Phase A input.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
Add a driver for the NXP MCUX Quadrature Decoder. The driver
is simple and only implements the phase a and phase b inputs. The
module has additional features which can be added in future PRs.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
Added support for the AMS AS621x series of temperature sensors as a
variant of the TI TMP108 temperature sensor.
Signed-off-by: Jared Baumann <jared.baumann8@t-mobile.com>
Signed-off-by: James Johnson <james.johnson672@t-mobile.com>
Add support for reading the VFOCV register, which contains the model
estimated open circuit voltage for the cell.
Link: https://pdfserv.maximintegrated.com/en/an/AN6358.pdf
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
This commit adds a sensor attribute and helper functions such that
the unique ROM of 1-Wire devices can easily configured.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
In order to bring consistency in-tree, migrate all includes within
include directory to the new prefix <zephyr/...>. Note that the
conversion has been scripted, refer to zephyrproject-rtos#45388 for more
details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Comparator will monitor signal though ADC channel, based on
user configuration, callback will be triggered.
This will enable comparator functionality for nuvoton MCU utilizing its
ADC threshold detection feature. Implementation is exported through
sensor trigger API. Use of CONFIG_ADC_CMP_NPCX is required.
Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com>
Move include paths and add new target_include_directories to support
backwards compatibility:
* /include -> /include/zephyr
example: <irq.h> -> <zephyr/irq.h>
Issue #41543
Signed-off-by: Yuval Peress <peress@google.com>
