Move the kconfig options used to configure the interrupt
and wait time to the sample which uses them instead of
having them in the architecture code.
This options are very particular for this sample and not
really an API.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This option can be used now also with native_sim
and seems to work fine with both 32 and 64 bit targets.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Replace uses of native_[posix,sim]_64 in the documentation
and kconfig help messages with native_[posix,sim]/native/64
to match the hwmv2 naming.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The CONFIG_STACK_SENTINEL adds 4 bytes to the stack. Take these
into account for CONFIG_ARCH_POSIX_RECOMMENDED_STACK_SIZE.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Add support for LLVM's libfuzzer utility. This works by building an
executable with a "LLVMFuzzerTestOneInput()" entry point (which is
external to Zephyr, running in the host process environment!), which
it drives out of its own main() routine. The toolchain API is exposed
as just another sanitizer variant, which is clean.
Signed-off-by: Andy Ross <andyross@google.com>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Unused after commit 71ce8ceb18 ("kernel: consolidate error handling
code").
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Set the recommended thread stack size to 40 bytes in case a build is
made for a 64-bit native posix board
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Added an option to stop the execution of the posix arch based
executable on the first fault, even if the fault stemmed from a
non essential thread.
Having it fail faster, in the first fault, will ease debugging
in many cases.
The option is disabled by default to preserve the old behavior.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Architecture defconfigs are not used anymore and are stale. Remove them
to avoid confusion.
Related to #14442
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Appears within a menu that already has a 'depends on ARCH_POSIX'.
'depends on FOO' on a menu will add 'depends on FOO' to each item within
it. 'if FOO' work similarly.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Rather than do that for each architecture, source SoC Kconfigs where the
code is maintained, under ZEPHYR_BASE/soc.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move the SoC outside of the architecture tree and put them at the same
level as boards and architectures allowing both SoCs and boards to be
maintained outside the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
A design flaw of 'gsource' is that there's no way to require at least
one file to match the glob pattern. This could lead to silent errors.
Switch to a new design, where a plain 'source' is globbing and requires
at least one file to match. A separate 'osource' (optional source)
statement is available for cases where it's okay for a pattern (or plain
filename) to not match any files.
'orsource' combines 'osource' and 'rsource' (relative source).
This commit search-replaces 'gsource' with 'source', but backwards
compatibility with 'gsource' is still maintained by making it an alias
for 'osource' (and by making 'grsource' an alias for 'orsource').
The three Kconfig files arch/{nios2,posix,xtensa}/Kconfig source
arch/{nios2,posix,xtensa}/soc/*/Kconfig, which doesn't match any files.
Use 'osource' for those. The soc/*/Kconfig files seem to be for
additional SoC-specific symbols, only none exist yet on those ARCHes.
Also use 'osource' for the source of $ENV_VAR_BOARD_DIR/Kconfig in
boards/Kconfig, which doesn't exist for all boards.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Up until now, Zephyr has patched Kconfig to use the last 'default' with
a satisfied condition, instead of the first one. I'm not sure why the
patch was added (it predates Kconfiglib), but I suspect it's related to
Kconfig.defconfig files.
There are at least three problems with the patch:
1. It's inconsistent with how Kconfig works in other projects, which
might confuse newcomers.
2. Due to oversights, earlier 'range' properties are still preferred,
as well as earlier 'default' properties on choices.
In addition to being inconsistent, this makes it impossible to
override 'range' properties and choice 'default' properties if the
base definition of the symbol/choice already has 'range'/'default'
properties.
I've seen errors caused by the inconsistency, and I suspect there
are more.
3. A fork of Kconfiglib that adds the patch needs to be maintained.
Get rid of the patch and go back to standard Kconfig behavior, as
follows:
1. Include the Kconfig.defconfig files first instead of last in
Kconfig.zephyr.
2. Include boards/Kconfig and arch/<arch>/Kconfig first instead of
last in arch/Kconfig.
3. Include arch/<arch>/soc/*/Kconfig first instead of last in
arch/<arch>/Kconfig.
4. Swap a few other 'source's to preserve behavior for some scattered
symbols with multiple definitions.
Swap 'source's in some no-op cases too, where it might match the
intent.
5. Reverse the defaults on symbol definitions that have more than one
default.
Skip defaults that are mutually exclusive, e.g. where each default
has an 'if <some board>' condition. They are already safe.
6. Remove the prefer-later-defaults patch from Kconfiglib.
Testing was done with a Python script that lists all Kconfig
symbols/choices with multiple defaults, along with a whitelist of fixed
symbols. The script also verifies that there are no "unreachable"
defaults hidden by defaults without conditions
As an additional test, zephyr/.config was generated before and after the
change for several samples and checked to be identical (after sorting).
This commit includes some default-related cleanups as well:
- Simplify some symbol definitions, e.g. where a default has 'if FOO'
when the symbol already has 'depends on FOO'.
- Remove some redundant 'default ""' for string symbols. This is the
implicit default.
Piggyback fixes for swapped ranges on BT_L2CAP_RX_MTU and
BT_L2CAP_TX_MTU (caused by confusing inconsistency).
Piggyback some fixes for style nits too, e.g. unindented help texts.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Until now, Zephyr has used a patched Kconfiglib that turns 'source' into
a globbing source (by replacing 'source' with 'gsource' at the token
level). There's two problems with this:
- The patch needs to be maintained separately
- Misspelled filenames are silently ignored, as they look like glob
patterns that don't match anything
Fix it as follows:
1. Replace all 'source' statements that use wildcards with 'gsource'
2. Remove the custom Kconfiglib patch so that 'source' no longer globs
The sed pattern '/source.*[*?]/s/source/gsource/' was run over all
Kconfig* files to do the replacement.
source's that use environment variables that might contain glob patterns
were manually changed to gsource.
Building the docs in doc/ is a good test, as doc/Makefile deliberately
sets the environment variables to glob up as many Kconfig files as
possible.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
This file never existed.
'source' currently ignores missing files instead of throwing an error,
due to Zephyr's custom globbing logic.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Added a new config variable with the recommended stack
size for threads which are only meant for the posix architecture
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
A new arch (posix) which relies on pthreads to emulate the context
switching
A new soc for it (inf_clock) which emulates a CPU running at an
infinely high clock (so when the CPU is awaken it runs till completion
in 0 time)
A new board, which provides a trivial system tick timer and
irq generation.
Origin: Original
Fixes#1891
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
