Add SPI pin for the nucleo_f401re pinmux.
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Add a SPI master and slave driver for the L4, F4 and F3 STM32
SoCs families.
Change-Id: I1faf5c97f992c91eba852fd126e7d3b83158993d
Origin: Original
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Tested-by: Lee Jones <lee.jones@linaro.org>
Some drivers would need some specific configuration flags,
re-introduce a vendor specific field for this purpose.
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Current implementation of LL_SPI_TransmitData16 on F3/F7/L4 family
generates following warning:
"warning: dereferencing type-punned pointer will break strict-aliasing
rules [-Wstrict-aliasing]"
Besides being forbidden by rule, this cast is not needed, as register is
16 bits wide. Modification has been tested on L4 SoC.
stm32yyxx_ll_spi.h being included in soc.h file, warning is generated
at each compiled object, this commit allows a clean build.
This issue is referenced in ST and tracked under
reference 13359. Code will be updated on upcoming stm32cube updates.
Change-Id: I3ca54a81d849d4852eca86b52b6825b60e18b752
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Enabling the HAL and the LL flags duplicate definitions when
compiling in driver.
Since the i2c HAL is not needed, disable it.
This is a HAL issue that needs to be addressed (not zephyr)
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
+ VBLUno51 board
nRF51822
Bluetooth Low Energy
DAPLink interface
UNO pinout
4 power
+ Wiki: https://vngiotlab.github.io/vbluno/
+ The following samples were tested:
hello_world
basic/button
basic/blinky
bluetooth/peripheral_hr
bluetooth/beacon
Signed-off-by: Nam Do <robotden@gmail.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When flashing in synchronous mode with BLE roles active,
ticker function calls will be deferred to avoid radio ISR
latencies. Increase the total operations supported by 1, to
accommodate flash driver's use of ticker operations.
It has been observed, without this increase, either the
flash driver returned -ECANCEL or the BLE Controller
asserted on data transmit as a slave (trying to force data
transmit on earliest connection event interval).
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Locking interrupts for a long duration is in general bad design, and
is particularly bad for the controller which depends on low latency
interrupts. Instead of using interrupt locking introduce a new flag to
track the shared buffer usage and simply drop characters if the flag
is set.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Implement privacy-enabled filtering in the advertiser role. This
includes all required checks when running address generation and
resolution so that the advertiser complies with the relevant
specification sections.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fix missing re-initialization of ret_cb to
TICKER_STATUS_BUSY before every new call to ticker interface
functions' with operation's callback.
One issue was undirected advertisement disable to return
failure status in the scan_adv sample.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
With the fix in commit 3c23c6f53d ("Bluetooth: controller:
Fix assert due to stale tick count") it is required that a
skipping event shall abort the previous role in order to
enable the ticker_job to resume and reschedule next ticker
expiry.
In the scan_adv sample, with continuous scanning, an
advertiser would pre-empt it, but if the advertiser skipped
its event without aborting the scanner, the scanner is hung
with its rx window without a timeout, and HCI command to
stop the advertiser will wait forever to complete.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The scanner was reserving a little less slot ticks which
caused other roles to overlap before scan window could
close.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Explicitly select CONFIG_BLUETOOTH_BROADCASTER and
CONFIG_BLUETOOTH_OBSERVER in the scan_adv sample.
If the Controller is included without connections support
then only broadcaster support is compiled in by default,
hence add broadcaster and observer role support explicitly
in the prj.conf file.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
By now, t0 register restored value is overwritten
by mepc and mstatus values prior to returning from ISR.
Fixed by restoring mstatus and mepc registers before
restoring the caller-saved registers.
As t0 is a temporary register within the riscv ABI,
this issue was unnoticed for most applications, except
for computation intensive apps, like crypto tests.
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
This changes increases content buffer length
MBEDTLS_SSL_MAX_CONTENT_LEN to 1500 bytes so that we can use
this config for echo-client and echo-server network sample
applications which need to send bigger data than 1024 bytes.
Removing MBEDTLS_PEM_PARSE_C as we do not have any cert in PEM
format.
Place various MBEDTLS debug options behind CONFIG_MBEDTLS_DEBUG
Kconfig option which was introduced in previous commit.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add Kconfig option that can be used to enable various debug
options in mbedtls config file.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Next two commits will increase the mbedtls ram usage a bit and
https client and server sample test will fail.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the net app API is automatically initialized, there is no
need to call net_app_init() by the http client and server sample
applications.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Removing CONFIG_NET_APP_SETTINGS from prj.conf file as the
sample does not use or need any IP addresses.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit will convert echo-client to use the net app API
when creating the connection to peer. Most of the network
setup code will be removed from echo-client by this commit.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit will convert echo-server to use the net app API
when creating the listening service. Most of the network
setup code will be removed from echo-server by this commit.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The network application API is a higher level API for creating
client and server type applications. Instead of applications
dealing with low level details, the network application API
provides services that most of the applications can use directly.
This commit removes the internal net_sample_*() API and converts
the existing users of it to use the new net_app API.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This doesn't make much practical difference, however it should resolve
Coverity CIDs 170740 and 170748.
Jira: ZEP-2343
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If ICMP packets do not fit in 1 net_pkt fragment the checksum
will be calculated incorrectly.
The problem shows up when using ping with the -s option to
create large ping requests. Eventhough the ping command does
accept the reply without complaining, Wireshark warns that
the icmp checksum is incorrect.
Signed-off-by: Erwin Rol <erwin@erwinrol.com>
We get some failures to build if we don't filter this test to only
boards that support uart interrupts.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Build issues caused by commit fe882f407d
which missed camel case conversion of _TimestampOpen, _TimestampRead,
and _TimestampClose.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
With the ticker for flash driver added, the Controller was
corrupting memory outside its allocations by incorrectly
using the flash ticker instance to be a BLE role and
corrupting memory. This is now fixed by checking for the
ticker ids to be within the Controller's use before using
them.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In some cases applications may want better control of advertising
instead of the stack doing automated re-enablement. Introduce a new
option that can be used to do more "manual" advertising control.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The BT_DEV_ADVERTISING flag already does a suffient job with tracking
the actual advertising state, so there's no need for bt_le_adv_stop()
to return an error if KEEP_ADVERTISING is set. We still need to clear
KEEP_ADVERTISING, but it should not be considered an error if it was
not set.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Implements CONFIG_APPLICATION_MEMORY for x86. Working in
XIP and non-XIP configurations.
This patch does *not* implement any alignment constraints
imposed by the x86 MMU, such enabling will be done later.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The defaults of 0x100000 for ROM and 0x400000 for RAM are intended
to 'fake' a XIP configuration, this all takes place in just RAM.
The gap between these two values is 3 megabytes, specify this
properly.
Fixes numerous test cases on qemu_x86 if CONFIG_XIP is enabled.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This script was assuming that all XIP data copied sections
were contiguous. However with application memory partitioning
enabled, this is not the case; in between the kernel data sections
and the app data sections will be the kernel's BSS and noinit.
As a quick fix, reset the last section compared if we encounter
the kernel's BSS section.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Applications will have their own BSS and data sections which
will need to be additionally copied.
This covers the common C implementation of these functions.
Arches which implement their own optimized versions will need
to be updated.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is conditionally defined based on whether we are splitting
the application from the kernel, and is used for specifying
kernel input sections based on input files.
The kernel output sections will get matching input sections only
in libzephyr.a and kernel/lib.a.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>