move fs.h to fs/fs.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move flash_map.h to storage/flash_map.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
USBD_CFG_DATA_DEFINE macro has not consider that a class
could have more than one set of usb_cfg_data struct.
If a class has more than one set of usb_cfg_data
then they should be sorted the same way like by
USBD_DEVICE_DESCR_DEFINE macro.
Fixes: #16240
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Log records may store either data or pointers to more records. In both
cases they must have the same size. With 64-bit pointers, the amount
of data that can occupy the same space as a pointer has to be adjusted.
And storage alignment has to accommodate actual pointers not u32_t.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Log arguments were hardcoded to u32_t values. On 64-bit systems, this
is rather restrictive. To make things clear, arguments now have their
own type, log_arg_t, which now can be adjusted in only one location
if need be. It is currently defined as unsigned long whose effective
width is equivalent to u32_t on 32-bit systems, and u64_t on 64-bit
systems.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The last FCB test to run (fcb_test_last_of_n) uses uninitialized
test_data[] and leaves behind a flash.bin with random content. Pick
another one (fcb_test_reset) that leaves a deterministic flash.bin
behind and run that last instead.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
YAML document separators are needed e.g. when doing
$ cat doc1.yaml doc2.yaml | <parser>
For the bindings, we never parse concatenated documents. Assume we don't
for any other .yaml files either.
Having document separators in e.g. base.yaml makes !include a bit
confusing, since the !included files are merged and not separate
documents (the merging is done in Python code though, so it makes no
difference for behavior).
The replacement was done with
$ git ls-files '*.yaml' | \
xargs sed -i -e '${/\s*\.\.\.\s*/d;}' -e 's/^\s*---\s*$//'
First pattern removes ... at the end of files, second pattern clears a
line with a lone --- on it.
Some redundant blank lines at the end of files were cleared with
$ git ls-files '*.yaml' | xargs sed -i '${/^\s*$/d}'
This is more about making sure people can understand why every part of a
binding is there than about removing some text.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The settings module processes the variable name by splitting it up in
a set of variables. This PR removes the splitting up and keeps the
variable name as one string.
It is an alternative to #16609
The possibility is introduced to register handler including a
separator, or to register a handler for each variable.
The ability is introduced to load a subtree from flash or even to load
a single item.
Two ways to operate on variable and settings_handler names are provided:
settings_name_steq(const char *name, const char *key, const char **next)
which checks if name starts with key, returns 1/0 if it does/does not
the remaining part of name is in next.
settings_name_split(const char *name, char *argv, const char **next)
which splits up name in a part before "/"" that is found in argv and
the remaining part that is in next.
A mutex is added to make settings thread-safe
The settings_handlers list is stored in reverse alphabetical order, this
allows registration of e.g. bt and bt/mesh in separate handlers, the bt
handler itself should not contain any handling of bt/mesh.
A settings_deregister() method is added. Settings_handlers can now be
added/removed when required. This saves RAM when settings_handlers are
not needed.
Tests have been updated to reflect changes in the settings api.
Updates after meeting:
1. Removed settings_deregister
2. Changed settings_name_split() in settings_name_next:
int settings_name_next(const char *name, const char **next): returns
the number of characters before the first separator. This can then be
used to read the correct number of characters from name using strncpy
for processing.
3. New functional test added
Update in settings.h: settings_name_next() changed position -> index
Added some comments in settings.h (settings_name_steq())
Updated tests to reflect change to settings_name_next() and pointer
value comparison. The functional test can now also run on qemu_x86.
Corrected some documentation in header.
Changed registration of handlers to be non ordered.
Changed handler lookup to handle non ordered list of handlers, this
improves handler matching in case different length names are compared
and also makes it easier to add rom based handlers as they will not be
ordered.
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
Per guidelines, all statements should have braces around them. We do not
have a CI check for this, so a few went in unnoticed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
On boards that have the arm or nxp mpu, configure the mpu to allow flash
writes. Otherwise this test will fail with an mpu fault.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Shell history module reworked to use ring buffer for storing
commands. Dedicated buffer is used to story all command lineary.
History capacity is in bytes not in number of entries, e.g.
many short commands can be stored or few long (depending on
CONFIG_SHELL_HISTORY_BUFFER).
Removed implicit command null termination from shell_history and
added it to shell after fetching command line from the history.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Refactor device api test using standard placement for descriptor table
and configuration data.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Remove duplicated execution path for composite configuration, USB
device stack initialization is done inside stack for both cases.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
In order to unify the legacy and composite code, move the class and
vendor request handler buffer into the USB device code, just like in
composite mode. The option is renamed from USB_COMPOSITE_BUFFER_SIZE
into USB_REQUEST_BUFFER_SIZE and also replaces the USB_DFU_MAX_XFER_SIZE
and USB_HID_MAX_PAYLOAD_SIZE options.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Added a test case with corner case scenario, in which sector closing
operation is interrupted (e. g. due to power-down).
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Added a test for testing full round GC on 3-sectors
configuration. In this case all kind off sector can
appeared so this test covers well more numerous
sectors configurations.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Added basic tests for the NVS file system. One of the tests covers power
down during the flash write operation.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Add verification that interface number and endpoint addresses are
correctly allocated.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Major changes are:
- Expose settings backend API to enable custom backend support.
- Add a new CONFIG_SETTINGS_CUSTOM backend to allow registering a custom
backend.
- Change api of the handlers h_set() routines to allow for
backend-specific read callbacks.
- Provide a customizable settings_backend_init() routine for custom
backends.
- Move runtime settings support to be its own backend.
Signed-off-by: François Delawarde <fnde@oticon.com>
Instead of checking for -EINVAL check that return is not successful
since USB device may return other error code.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Unaligned test might filed in case fcb area was not clen before
run.
The patch insert clean operation before this test.
fixes#15063
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Unlike CONFIG_HW_STACK_PROTECTION, which greatly helps
expose stack overflows in test code, activating
userspace without putting threads in user mode is of
very limited value.
Now CONFIG_TEST_USERSPACE is off by default. Any test
which puts threads in user mode will need to set
CONFIG_TEST_USERSPACE.
This should greatly increase sanitycheck build times
as there is non-trivial build time overhead to
enabling this feature. This also allows some tests
which failed the build on RAM-constrained platforms
to compile properly.
tests/drivers/build_all is a special case; it doesn't
put threads in user mode, but we want to ensure all
the syscall handlers compile properly.
Fixes: #15103 (and probably others)
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Merge cb_usb_status_composite and cb_usb_status and use common
forward_status_cb for both composite and normal devices.
Fixes#14882
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Increase test timeout to 500s because it was noticed
that the default of 60s has truncated the test
suite run for nrf52840_pca10056
Signed-off-by: Cinly Ooi <cinly.ooi@intel.com>
The current flash configurations for all nRF52840's in Zephyr is
VERY constrained when it comes to allowing samples any space for
storage or custom areas. It only leaves the last 4 pages of flash
for "storage".
The nRF52840 is also capable of using OpenThread which defaults
to using the last 4 pages of flash for storing OpenThread-related
network data.
This means that while using OpenThread under any configuration
designed to use mcuboot partition slots, there is no space left
over for storage of any kind.
Let's adjust the partition table to set storage at 8 pages of
flash (32k). This fixes the conflict with OpenThread and leaves
room for future use cases that may arise.
Signed-off-by: Michael Scott <mike@foundries.io>
Ram back-end was unnecessary included in non qemu test which
increased RAM footprint much.
Patch includes ram backend into build only for qemu_x86 build.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The heap, plus a few globals relevant to mbedtls get put in
their own memory partition.
With systems that have power-of-two region size/alignment
constraints, this results in a 64K partition being created,
even though we are using just a whisker above 32K.
Lower the heap size a little so everything fits in 32K.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
It was possible via Kconfig to assign any partition for FCB using
its number. Partitions flash_area_id becomes non predefined
(are auto-generated). So it is possible only to guess which
number will be signed to certain area.
Unfortunately it is not possible to transfer FLASH_AREA_XXX_ID
label via Kconfig.
Patch assigns settings to the storage partition and remove
SETTINGS_FCB_FLASH_AREA property from settings Kconfig.
fixes#13388
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The reftime variable used for performance numbers is not initialized
prior to being used. Initialize it to the current uptime so delta
can be calculated correctly.
Fixes#13877
Fixes CID-190936
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Inside test_file_truncate(), the results of fs_seek() are not
checked. So adds some checks there.
Fixes#13874
Fixes CID-190939
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Checking the return of fs_stat to ensure that there is not hidden error.
Problem spotted by coverity.
CID 190949
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
In order to follow the naming from Linux, change the name of
can_msg to zcan_frame, and can_msg_filter to zcan_filter.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that can_copy_*() functions work as expected.
These functions are used by SocketCAN support.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
settings_line_len_calc() calculates only setting record
payload size, not record layout in flash size.
this patch remove inadequate test for this function.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Added test for check whether value lenght is properly
stored for unaligned settings record size.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
There are issues using lowercase min and max macros when compiling a C++
application with a third-party toolchain such as GNU ARM Embedded when
using some STL headers i.e. <chrono>.
This is because there are actual C++ functions called min and max
defined in some of the STL headers and these macros interfere with them.
By changing the macros to UPPERCASE, which is consistent with almost all
other pre-processor macros this naming conflict is avoided.
All files that use these macros have been updated.
Signed-off-by: Carlos Stuart <carlosstuart1970@gmail.com>
Nios2 platform was disabled due to compilation error. Meanwhile,
issue has been solved and tests can be re-enabled.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This patch adds a JSON web token library that adds the capability
to sign JSON tokens. This was located in subsys due to the dependency
on MBEDTLS, which resides in /ext.
Signed-off-by: David Brown <david.brown@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Patch introduces flash_map subsystem to operate on flash
image instead of direct operation using flash_driver API.
Changes allows to support operation on the image in any flash
device.
flash_map was not available when this subsystem was introduced.
Signed-off-by: Findlay Feng <i@fengch.me>
Patch introduces flash_map subsystem to operate on flash
footprint instead of direct operation using flash_driver API.
Flash area ID is used in API instead of direct flash-bank-offsets.
Changes allows to support operation on the partition in any flash
device.
flash_map was not available when this subsystem was introduced.
Signed-off-by: Findlay Feng <i@fengch.me>
This was never a long-term solution, more of a gross hack
to get test cases working until we could figure out a good
end-to-end solution for memory domains that generated
appropriate linker sections. Now that we have this with
the app shared memory feature, and have converted all tests
to remove it, delete this feature.
To date all userspace APIs have been tagged as 'experimental'
which sidesteps deprecation policies.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Set Kconfig symbol SETTINGS_FCB_FLASH_AREA based on the
DT_FLASH_AREA_<FOO>_ID define instead of being hard coded.
We replace 3 with DT_FLASH_AREA_IMAGE_SCRATCH_ID and
we replace 4 with DT_FLASH_AREA_STORAGE_ID.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
After addition of flash_map auto-generation it is needed to
use generated flas_area name instead of hard-code.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
After including native_posix USB controller we can perform some simple
tests on native_posix.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This allows to place instances of the class one after another in the
linker section.
Fixes#12908
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
USB relies on descriptors and configuration data allocations in
specific sections. This simple test verifies that at least size of the
data is correct.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add test to log_output module. Test suite covers usage of
log_output_string function.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Changed 'in place' mode to bypass logger system and directly
call active backends. With this approach memory footprint of
the logger can be significantly reduced in terms of RAM and ROM.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Extended logger configuration to allow function name prefix for
messages with certain severity levels. By default only debug
messages are prefixed with function name.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Such API is convinient for check the persistent storage
value size or whether the value is NULL.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Since it is possible to test back-end with base64 and without
test suite should be extended.
This patch introduce tests with and without base64 encoding
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Since it is possible to test back-end with base64 and without
test suite should be extended.
This patch introduce tests with and without base64 encoding
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Introduction of stream-style encoding required tests reworks.
Test for checking especially byte-string encoding is not required
anymore as any value is kept as byte-string.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
These tests were creating objects from header file in the bss.
Fixed it by moving the objects to appropriate object files.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Shell log backends were initialized from shell context. After
lowering logger thread priority order has been flipped. That
revealed a bug where shell logger backend was enabled before
backend ID's has been assigned during logger initialization.
ID assignment is moved to log backend enabling function making
it independent of order of initialization.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Extended logger suite to test correctness of reporting dropped
log messages.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
These changes were obtained by running a script created by
Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following
specification:
1. Read the contents of all dts_fixup.h files in Zephyr
2. Check the left-hand side of the #define macros (i.e. the X in
#define X Y)
3. Check if that name is also the name of a Kconfig option
3.a If it is, then do nothing
3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it
has neither of these two prefixes
4. Replace the use of the changed #define in the code itself
(.c, .h, .ld)
Additionally, some tweaks had to be added to this script to catch some
of the macros used in the code in a parameterized form, e.g.:
- CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS
- CONFIG_UART_##idx##_TX_PIN
- I2C_SBCON_##_num##_BASE_ADDR
and to prevent adding DT_ prefix to the following symbols:
- FLASH_START
- FLASH_SIZE
- SRAM_START
- SRAM_SIZE
- _ROM_ADDR
- _ROM_SIZE
- _RAM_ADDR
- _RAM_SIZE
which are surprisingly also defined in some dts_fixup.h files.
Finally, some manual corrections had to be done as well:
- name##_IRQ -> DT_##name##_IRQ in uart_stm32.c
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Changed LOG_MODULE_REGISTER and LOG_MODULE_DECLARE macros to take log
level as optional parameter. LOG_MODULE_DECLARE can now also be used
in static inline functions in headers. Added LOG_LEVEL_SET macro
which is used when instance logging API is used to indicate maximal
log level compiled into the file.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming every project "NONE"
defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names in the samples (and again, in
the tests folder) folder, small manual adjustments have been done.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
Extended logger to support optional log message prepending with
function name.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Extended supported number of arguments in log message. Support for
messages consisting of more than 2 chunks had to be added. So far
messages could consist of one chunk (up to 3 args) or two chunks
(2 args in first chunk and 7 in second chunk). Once 2+ chunks
support is added number of arguments is techinically limited to
15 (4 bit field). log_core and log_output extended to suppor 10
arguments.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Log_core test was failing due to test structure elements not being
correctly reset before the test.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Remove redundant 'sample' tag and add something that matches the
functionality and features being tested, demonstrated.
Avoid short abbriviations and using full names for fs.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Extended macro to accept flag indicating if given backend must be
initialized and enabled when log subsystem starts. Typically, simple
backends will have autostart flag set. More complex may require
explicit enabling (e.g. shell over BLE can only be enabled when
BLE connection is established).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Extended ring buffer to allow storing raw bytes in it. API has been
extended keeping 'data item' mode untouched.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Deprecate API prefixed with sys_ring_buf_ and rename it
to ring_buf_item_ since this API is not a typical ring buffer
but ring buffer of data items (metadata + 32bit words).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Extending logger to support logging transient strings (with %s).
With dedicated call (log_strdup), string is duplicated to a buffer
from internal logger pool. Logger implicitly manages the pool.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This commit removes all MPU-related (ARM_CORE_MPU and NXP_MPU)
options exept ARM_MPU, which becomes master switch controlling
MPU support on ARM.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The ARM_MPU_NRF52X option is just selecting ARM_MPU option,
which could be also controlled through menuconfig.
This commit removes the ARM_MPU_NRF52X option and replaces
its usage by ARM_MPU option.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
tests/subsys/logging/log_core does not work if inplace processing
is set and the process thread is disabled.
So let's set the valid configuration in its project file
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
The return of memset is never checked. This patch explicitly ignore
the return to avoid MISRA-C violations.
The only directory excluded directory was ext/* since it contains
only imported code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Rather than having some implied name for the logging name, explicitly
pass it in the macros LOG_MODULE_REGISTER & LOG_MODULE_DECLARE.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
irq_lock returns an unsigned int, though, several places was using
signed int. This commit fix this behaviour.
In order to avoid this error happens again, a coccinelle script was
added and can be used to check violations.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Rather than having some implied name for the logging name, explicitly
pass it in the macros LOG_MODULE_REGISTER & LOG_MODULE_DECLARE.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Prepend the text 'cmake_minimum_required(VERSION 3.8.2)' into the
application and test build scripts.
Modern versions of CMake will spam users with a deprecation warning
when the toplevel CMakeLists.txt does not specify a CMake
version. This is documented in bug #8355.
To resolve this we include a cmake_minimum_required() line into the
toplevel build scripts. Additionally, cmake_minimum_required is
invoked from within boilerplate.cmake. The highest version will be
enforced.
This patch allows us to afterwards change CMake policy CMP000 from OLD
to NEW which in turn finally rids us of the verbose warning.
The extra boilerplate is considered more acceptable than the verbosity
of the CMP0000 policy.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
It shouldn't be necessary to disable the mpu for this test. Enable
CONFIG_MPU_ALLOW_FLASH_WRITE=y instead.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The flash API requires write protection to be disabled before erasing
the flash. It appears that the nordic platforms for which this test was
originally implemented do not enforce the requirement to disable write
protection. The mcux flash driver, however, does enforce the
requirement, so fix the test to make it work on kinetis platforms.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
It is not necessary to link 'app' with ELMFAT or NFFS because their
usage requirements are covered by the 'APP_LINK_WITH_MBEDTLS'
mechanism that automatically links 'app' with the interface library
FS.
This patch removes the redundant target_link_libraries invocations.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Log API can be used before user can explicitly initialize the logger.
In order to ensure that logger core is ready to buffer log messages
it must be initialize as early as possible. Initialization does not
include initialization of default backend since driver may not be
ready and backend is needed only when log messages are processed.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The current test expects particular order of cap_webusb and cap_msosv2
structures, create alternative structure for comparison.
Fixes: #8732
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Remove the CMakeLists.txt file that is in the 'common' directory of
nffs_fs_api. It has likely been added by mistake as it does not make
any sense as it is written.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
We are getting stack corruption on some platforms, so increase stack to
allow the test to run.
Fixes#8085
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Tests failed on the target because flash area reserved
for fcb data storage was to small.
This path add dts overlay file for nrf52_pac10040 board which
increases this flash area to proper size.
Fixes#8038
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The introduction of `sanitycheck --list-tests` fails to properly parse
the subcases in tests/subsys/fs/nffs_api/ beacause four of them are
all packed with #ifdefs in a single src/main.c.
So this breaks that testcase in four:
- creating a common folder with the code itself
- moving the common code in */src/main.c to common/test_nffs.h and
adding ../common/*.c to the sources
- thinning each testcase.yaml to have only the needed testcase
definition
- adding zephyr_include_directories(../common) to the cmakefiles
so we now produce with --list-tests
- filesystem.nffs.basic.append
- filesystem.nffs.basic.corrupt_block
- filesystem.nffs.basic.corrupt_scratch
- filesystem.nffs.basic.fs_mount
- filesystem.nffs.basic.gc
- filesystem.nffs.basic.gc_on_oom
- filesystem.nffs.basic.incomplete_block
- filesystem.nffs.basic.large_write
- filesystem.nffs.basic.long_filename
- filesystem.nffs.basic.lost_found
- filesystem.nffs.basic.many_children
- filesystem.nffs.basic.mkdir
- filesystem.nffs.basic.open
- filesystem.nffs.basic.overwrite_many
- filesystem.nffs.basic.overwrite_one
- filesystem.nffs.basic.overwrite_three
- filesystem.nffs.basic.overwrite_two
- filesystem.nffs.basic.read
- filesystem.nffs.basic.readdir
- filesystem.nffs.basic.rename
- filesystem.nffs.basic.split_file
- filesystem.nffs.basic.unlink
- filesystem.nffs.basic.wear_level
- filesystem.nffs.cache.cache_large_file
- filesystem.nffs.cache.fs_mount
- filesystem.nffs.large.fs_mount
- filesystem.nffs.large.large_system
- filesystem.nffs.large.large_unlink
- filesystem.nffs.performance.fs_mount
- filesystem.nffs.performance.performance
30 total.
vs before, that we did:
- filesystem.nffs.basic.append
- filesystem.nffs.basic.corrupt_block
- filesystem.nffs.basic.corrupt_scratch
- filesystem.nffs.basic.fs_mount
- filesystem.nffs.basic.gc
- filesystem.nffs.basic.gc_on_oom
- filesystem.nffs.basic.incomplete_block
- filesystem.nffs.basic.large_write
- filesystem.nffs.basic.long_filename
- filesystem.nffs.basic.lost_found
- filesystem.nffs.basic.many_children
- filesystem.nffs.basic.mkdir
- filesystem.nffs.basic.open
- filesystem.nffs.basic.overwrite_many
- filesystem.nffs.basic.overwrite_one
- filesystem.nffs.basic.overwrite_three
- filesystem.nffs.basic.overwrite_two
- filesystem.nffs.basic.read
- filesystem.nffs.basic.readdir
- filesystem.nffs.basic.rename
- filesystem.nffs.basic.split_file
- filesystem.nffs.basic.unlink
- filesystem.nffs.basic.wear_level
- filesystem.nffs.cache.append
- filesystem.nffs.cache.corrupt_block
- filesystem.nffs.cache.corrupt_scratch
- filesystem.nffs.cache.fs_mount
...
- filesystem.nffs.cache.split_file
- filesystem.nffs.cache.unlink
- filesystem.nffs.cache.wear_level
- filesystem.nffs.large.append
- filesystem.nffs.large.corrupt_block
- filesystem.nffs.large.corrupt_scratch
...
- filesystem.nffs.large.split_file
- filesystem.nffs.large.unlink
- filesystem.nffs.large.wear_level
- filesystem.nffs.performance.append
- filesystem.nffs.performance.corrupt_block
...
- filesystem.nffs.performance.unlink
- filesystem.nffs.performance.wear_level
92 total.
(so it was repeating ALL the subcases for eatch main testcase)
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
New test for check whether deleted item is not copied to the newest
fcb sector during compression procedure.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Set FAT FS mount point name as per ELM FAT Library drive
name format.
Add file system specific headers wherever necessary.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Added test for initialization with FCB backend.
This test should goes over reset so it test blank and
subsequent initialization and data restoring capability
after the reset.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The NFFS partition at the end of flash is also useful for any other
file system or even the Flash Circular Buffer (FCB). Rename the
partition from 'nffs_partition' to 'storage_partition' and make it
depend on a new hidden Kconfig entry which the relevant users will
select (such as NFFS and FCB).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
API settings_subsys_init call was changed so that it returns
error (so returns int instead of void).
Prototype of storage helper function export_func for
settings_handler::h_export was changed so that it returns error
(so returns int instead of void).
Fixed few other error handling issues by ignoring return
values.
Tests were aligned to above patches.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Adapt the MyNewt non-volatile configuration system to become a settings
system in Zephyr.
The original code was modifed in the following ways:
* Renamed from config to settings
* Use the zephyr FCB, FS API, and base64 subsystems
* lltoa like function was added to sources as it was required but not
included in Zephyr itself.
* The original code was modified to use Zephyr's slist.h as single
linked list implementation.
* Reworked code which was using strtok_r, added function
for decoding a string to a s64_t value.
* Thank to the above the settings subsys doesn't require newlibc anymore.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
With upcoming ICs that are not in the nRF5x family, rename the flash
driver and all its dependencies from nrf5 to nrf.
Should also fix the issue introduced by f49150cab6 which broke the
assignment of the flash device due to a partial rename.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add a new test for testing multiple file systems mounted
simultaneously on Zephyr. The test enables FATFS and NFFS
togeather and uses RAM as backend storage device.
The intention of this test is to demonstrate multiple file systems
support and perform basic file and directory operations. This test
heavily reused the existing fat_fs_api and nffs_fs_api test sources.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Adapt nffs_fs_api test as per the VFS layer changes.
Add new test for NFFS file system mount.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Adapt fat_fs_api test as per the VFS layer changes.
Add new test for FatFs file system mount.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Test of f. flash_area_get_sectors was failing because parameter for
passing capacity of the sectors array was uninitialized.
This patch fix this bug.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
platform_whitelist does not deal with comma separated strings. Also
remove build_only option, this should also run on those devices.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Prior to this commit, `flash_area_layout()` was being passed a pointer
to the incorrect type (`uint32_t *` where `int *` was expected). This
caused the following warning to be reported:
```
[...]/subsys/storage/flash_map/flash_map.c: In
function 'flash_area_get_sectors':
[...]/subsys/storage/flash_map/flash_map.c:191:32:
warning: passing argument 2 of 'flash_area_layout' from incompatible
pointer type [-Wincompatible-pointer-types]
return flash_area_layout(idx, cnt, ret, get_sectors_cb, &data);
^~~
[...]/subsys/storage/flash_map/flash_map.c:136:12:
note: expected 'int *' but argument is of type 'uint32_t * {aka long
unsigned int *}'
static int flash_area_layout(int idx, int *cnt, void *ret,
^~~~~~~~~~~~~~~~~
```
This commit changes the argument type to `u32_t` for both functions.
Signed-off-by: Christopher Collins <ccollins@apache.org>
It is faster to operate directly on flash_area pointer instead
of fetch it all the time using the fcb flash area id.
Also as f_area_id was needed only for get appropriate flash_area
pointer, so it is better to pass it only while initialization
the fcb and not store it in fcb instance data at all.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
fcb sectors description switch from using array of flash_area
structures to array of flash_sector structures.
This patch aligns tests to this change.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Removed CONFIG_FLASH_PAGE_LAYOUT because it is already selected
by NFFS kconfig itself. Some other keywords were duplicated.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
CONF_FILE was overwritten by boilerplate.cmake so not proper
settings were took for tests. NRF5 flash driver had changed
its name to one defined by DT (see #5773) - which causes
incompatibility witch previous settings.
This patch solves this problems.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
We want to move to use a common FLASH_DEV_NAME across the various flash
drivers. So samples, tests, or other code can be a bit more generic. So
replace CONFIG_SOC_FLASH_NRF5_DEV_NAME with FLASH_DEV_NAME.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The output of those samples can be parsed and verified by sanitycheck,
so lets use the console harness for this.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Introduce flas_map module is abstraction over flash memory and its
driver for using flash memories along with description of
available flash areas.
Module provides simple API for write/read/erase and so one.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Function flash_read was calling without checking return value.
(Coverity CID: 178794)
This patch cover this issue.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>