It is invalid to try to bit shift the same amount of bits as
what is the number of bits in the left expression’s type.
Coverity-CID: 187079
Fixes#8988
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Now that legacy - and unrelated - function named net_pkt_get_data has
been removed, we can rename net_pkt_get_data_new relevantly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Remove use of select to "force" enabling other configs in subsys/fs
and subsys/net/l2. The forcing will cause infinite kconfig recursion.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
subsys/net/lib/lwm2m/Kconfig.ipso is 'source'd within an 'if LWM2M', in
subsys/net/lib/lwm2m/Kconfig, so the 'depends on LWM2M' is redundant.
The 'depends on NET_IPV4' and 'depends on NET_L2_OPENTHREAD' are within
corresponding 'if's in the same file.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Some of these are from 'source'ing a file within a menu that has a
'depends on NET_L2_ETHERNET' (in drivers/ethernet/Kconfig) and then
adding another 'depends on NET_L2_ETHERNET' within it.
Similarly, subsys/net/l2/ethernet/Kconfig sources files within an
'if NET_L2_ETHERNET'.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
No Kconfig symbol called NET_GPTP_STACK_SIZE has ever been defined in
the Zephyr repo. Drop the CONFIG_* prefix from the #define.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
We sometimes want to join a device to OpenThread mesh automatically.
This commit adds supports to do by Kconfig.
The default of CONFIG_OPENTHREAD_JOINER_PSKD is based on this page:
https://codelabs.developers.google.com/codelabs/openthread-hardware/
Signed-off-by: Takumi Ando <takumi.ando@atmark-techno.com>
If we receive the ARP request, then check if the ARP cache
contains an entry for this IP address already. If it does,
then update the MAC address in the cache.
Fixes#10188
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No need to hide the symbols in the header file if CONFIG_NET_LLDP
is not enabled. This also allows the documentation to be generated
properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Some more were added since the cleanup pass in June 2018. See e.g.
commit 2d50da70a1 ("drivers: ipm: Kconfig: Remove redundant 'default n'
properties") for a motivation. It also avoids people wondering whether
or not they need to put in 'default n'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
- differentiating actual "fragment" to buffer element from a net_pkt
- instead of copying data (and thus allocating buffer) let's just take
the fragment buffer and put it into result packet.
- fixing compilation issue in relevant test
It's more efficient that way, as we use already allocated fragment
buffer instead of reallocating/deallocating after each fragment
reception.
A possible optimization would be to calculate the actual size + header
difference if only the actual size is close to the target size.
It would avoid to get a dry run of the header decompression for each
fragment received. The difficulty being in finding the sweet spot when
it is relevant to calculate the header difference.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Maybe there is an easier way to fill in the buffer in one call from an
otMessage.
Switch "frag" keyword to "buf", as "frag" is now reserved for actual
packet fragmentation and not buffer.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It is planned to deprecate SHELL_CREATE_STATIC_SUBCMD_SET macro
which is replaced by SHELL_STATIC_SUBCMD_SET_CREATE.
Additionally, removed irrelevant comments about alphabetical
ordering which is no longer needed.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Make sure that network related functions are always documented.
This means keeping the prototype and possible stub together.
Fixes#12615
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
There are issues using lowercase min and max macros when compiling a C++
application with a third-party toolchain such as GNU ARM Embedded when
using some STL headers i.e. <chrono>.
This is because there are actual C++ functions called min and max
defined in some of the STL headers and these macros interfere with them.
By changing the macros to UPPERCASE, which is consistent with almost all
other pre-processor macros this naming conflict is avoided.
All files that use these macros have been updated.
Signed-off-by: Carlos Stuart <carlosstuart1970@gmail.com>
Commit 44964c735e ("net/gptp: Switch GPTP to new net_pkt API") changed
the callback used for allocation (from net_pkt_get_reserve_tx to
net_pkt_alloc_with_buffer), but for compilation with
CONFIG_NET_DEBUG_NET_PKT_ALLOC enabled, both callbacks are used
(the first pointer was just overwritten, causing MPU FAULT).
This commit removes the extra callback and fixes the fault.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
And remove the parameter "full" as there is no "ll reserve" distinction
anymore. The parameter was unused since the ll reserve concept removal.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The packet can be referenced somewhere else and letting the newly added
L2 header will generate corrupt packet. If the same packet is being
resent, ethernet will add again its L2 header. Thus the need to remove
such L2 header every time a packet has been sent, successfully or not.
Fixes#12560
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is basically a dummy layer that just passes data through.
It is needed so that we can create CANBUS type network interface
to the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If packet family is AF_PACKET and CONFIG_NET_SOCKETS_PACKET
is enabled, just handover the packet to driver for sending.
L2 layer will not touch AF_PACKETs at the moment.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The return value of net_if_get_link_addr points to a struct net_linkaddr
instead of to the raw MAC address. Without this fix the source address
will always end in 06:03 and will most likely be the same for different
boards running the same software.
Signed-off-by: Daniel Glöckner <dg@emlix.com>
Since the rework of L2/L3 split, only L2 has access to its header. Thus
up to Ethernet one to set LLDP PTYPE.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Use the new API where relevant. Only sam_gmac is left aside for now.
This simplifies a lot the code as the caller should only care about
allocating net_pkt and its buffer once, and thus will not need to mess
with "frags" etc...
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The net-app API is removed. Users should use the BSD socket API
for application development.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It has been observed that some network drivers, f.ex. the SAM E70 GMAC,
call net_pkt_unref from inside the interrupt that signals the successful
transmission of a packet. This conflicts with the net_pkt_unref call
made by ethernet_send after the packet has been given to the driver.
We fix this by using an atomic_t to hold the reference count as there
might be other, difficult to find cases of net_pkt_(un)ref being used
across threads and interrupts.
The name of the element has been changed from "ref" to "atomic_ref" to
cause a compile error when code still has not been converted to use the
atomic_* functions.
Fixes#12708
Signed-off-by: Daniel Glöckner <dg@emlix.com>
Mark automatically and statically configured mesh-local addresses
with mesh_local flag, so that they are not used as a source for
off-mesh destinations.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In OpenThread RLOC address and ALOC address are used for internal mesh
routing and should not be used by applications as they can change
dynamically during runtime. Therefore prevent registering them on Zephyr
interface.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
OpenThread commissioner feature has extra stack requirements, hence
increase it in this configuration.
Fixes#12455
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
15.4 MHR is no longer set in net_buf pointed by net_pkt, but in a
separate net_buf, hence we need to check that net_buf now to
determine if we need to wait for ACK or not.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Two issues identified with 6lo fragmentation for ieee802154 that broke
the communication:
1) ieee802154_fragment_is_needed function did not take 15.4 FCS size
into account, hence taking wrong decision in some cases.
2) set_up_frag_hdr was writing with wrong offset, which resulted in 6lo
bytes being overwritten by 15.4 header.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Do not extra ref and then obscurely unref the packet inside
the statistics update function.
Actually, this extra ref/unref isn't needed here at all.
The packet is unreferenced only on a successful send, statistics
updating can be done before the unref in a clean and understandable way.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Try to catch the original caller of setup_gptp_frame() function
in order to see who is allocating buffers.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Update zephyr integration of openthread to latest api as of 2018-12-17:
2a75d30684
Both echo_server and echo_client compile and are operational.
Signed-off-by: Martin Turon <mturon@google.com>
Moving towards serialized fragmentation, adapting mac command creation
to avoid the need of ll_reserve etc...
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will permit to avoid the need for ll_reserve.
It also removes net_buf allocation and deletion, as it works per-frame.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Fragmentation has nothing to do with 6lo. Up to the bearer to do so.
This change is required for futur serialization of 15.4 fragmentation.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There is no need to reserve any space for each frag, as the l2 will
allocate a frag for the ethernet header, arp will do the same.
This is one step further to removing the concept of ll reserve.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Make sure that the link delay (propagation time) is calculated
same way as how Avnu/gptp is doing it with checks for rate ratio.
This is done like this in order to behave same way as their gptp.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is useful info as otherwise we get no indication to user
if the packet is not created and not sent.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Neighbor rate ratio cannot be 0 as that would mean 0 packet
delivery time which is not plausible.
Add also some debugging to print current neighbor propagation
delay value.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The pdelay_allowed_lost_resp_exceed_count was updated even if we
had received pdelay response.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Increase the net_buf length in proper places. So when gPTP
header is added, increase the buf->len properly, and then
when gPTP packet type is added, increase it again properly.
This way the net_buf length is updated in more logical way.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The state2str() function should only be used if debugging
is enabled thus add some pre-processor checks there.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print function and line number when changing state and when
debugging is enabled. Otherwise it is a bit difficult to follow
the program logic and locate the state change operation.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the msg parameter for PRINT_INFO() is always a const string
that is not coming from stack, there is no need to use
log_strdup() here. This helps to avoid the
"<log_strdup alloc failed>" messages.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Common statistics should be updated in one centralized place and
ethernet_send is the right place for tx stats, as well as ethernet_recv
for rx stats.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Remove network specific default and max log level setting
and start to use the zephyr logging values for those.
Remove LOG_MODULE_REGISTER() from net_core.h and place the
calls into .c files. This is done in order to avoid weird
compiler errors in some cases and to make the code look similar
as other subsystems.
Fixes#11343Fixes#11659
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Removed printing command help from help handler. It is now
realized by the shell engine. This change saves a lot of flash
but still allows to print help in command handler with function
shell_help_print.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Removing help "options" from shell API.
Currently SHELL_OPT macro is not used by users. What is more
commit: a89690d10f ignores possible options created in
command handler by the user. As a result they are not printed
in help message.
Second, currntly implemented "options" in command handlers options are
implemented without SHELL_OPT macro.
And last but not least this change will allow to implement
help handler in a way that user will not need to think about calling
functions printing help in a command handler.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Add missed out helper functions to update the errors.tx and error.rx
in the stats structure.
Signed-off-by: Fadhel Habeeb <fadhel@zilogic.com>
Signed-off-by: Nirav Parmar <niravparmar@zilogic.com>
Signed-off-by: Vijay Kumar B <vijaykumar@zilogic.com>
gPTP subsystem was calling pow(x,y) function with X and Y being
constants; these are replaced with the pre-computed values.
Signed-off-by: Andrei Laperie <andrei.laperie@intel.com>
Instead of redoing what Ethernet L2 already does, let just create the
gptp message without any Ethenet header. Which one will be done as
sending phase by Ethernet L2 relevantly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As for Ethernet, up to ieee802154 L2's send to actually sent the packet.
It's currently unoptimized as 6lo compression, 15.4 fragmentation and so
on will reallocate net_buf etc... but it's the first step towards
removing ll reserve space and more.
Applying changes to Openthread L2 as well.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now instead of such path:
net_if_send_data -> L2's send -> net_if tx_queue -> net_if_tx -> driver
net_if's send
It will be:
net_if_send_data -> net_if tx_queue -> net_if_tx -> L2's send -> driver
net_if's send
Only Ethernet is adapted, but 15.4 and bt will follow up.
All Ethernet drivers are made compatible with that new scheme also.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that sending is done at last time, in one pass, no need to go
through net_if_send_data here.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Currently, first part is done in L2's send, then the next one in
ethernet device driver net_if send function. That last one was already
moved to a L2 based implementation. Let's just move forward and place
the whole logic of the L2's send in that second function.
This is the first step, ethernet centric only, to move towards a
one-pass sending logic in net stack. In future, net_if's send will
disappear.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Current code generating Ethernet header is scattered all over the place,
sometimes in functions that are supposed to check something (and not
filling the header). Not to say about innefficiency.
Src ll address does not need to be set in L2 as net_if.c handles that
already.
Broadcast dst ll address is the same in ipv4 or ipv6, thus factorizing.
In each case, multicast is filled in only at the relevant place.
This is the first step towards changing L2 sending logic, when L2 send
API function will be the only point of sending. The redirection from
driver to L2 again (which finally uses the right device API function to
send) it a temporary hack.
This simplifies the code but will also enable using statically
allocated net_buf and ethernet header payload buffer afterwards.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is currently unoptimized, as all frags are allocated with relevant
ll reserve for such header space. However, this is the first step
towards getting rid of that ll reserve concept everywhere.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Remove an unnecessary local variable to store the
return value, instead return directly thereby saving
few bits of memory.
Found using Coccinelle.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
If ARP Request with sender IP address set to localhost then drop
the request.
Fixes#11489
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If network stack found ARP entry for peer address, then it
tries to send pending IP packet. But it always keeps ptype
as ARP only. In this particular scenario it has to be IP
packet.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If ARP header contains invalid fields then drop the packet.
Fixes#11257Fixes#11254Fixes#11253Fixes#11248
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Verify incoming ARP packet hardware and protocol type. Drop
unknown type of packets.
Fixes#11215Fixes#11217
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If we change the ethernet MAC address, then we must also remove
the old IPv6 interface identifier (iid) address from the
interface. Otherwise there might not be enough space in the IPv6
address array for the new iid address and beside the old iid
address is not useful any more after the MAC address is changed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Unify the function naming for various network checking functions.
For example:
net_is_ipv6_addr_loopback() -> net_ipv6_is_addr_loopback()
net_is_my_ipv6_maddr() -> net_ipv6_is_my_maddr()
etc.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we receive an IPv4 that has broadcast destination address, then
properly handle it.
This means that for
* ICMPv4, if CONFIG_NET_ICMPV4_ACCEPT_BROADCAST is set (this is the
default value) and we receive echo-request then accept the packet.
Drop other ICMPv4 packets.
* TCP, drop the packet
* UDP, accept the packet if the destination address is the broadcast
address 255.255.255.255 or the subnet broadcast address.
Drop the packet if the packets broadcast address is not in our
configured subnet.
In sending side, make sure that we do not route broadcast address
IPv4 packets back to us. Also set Ethernet MAC destination address
properly if destination IPv4 address is broadcast one.
Fixes#10780
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Previously, the wifi shell needed to remove the quotes from the
SSID parameter, passed in by the underlying shell.
The new shell is now able to parse quoted strings as arguments,
so this adjustment can be removed.
Otherwise, it results in a failure to connect to an AP, as the first
character of the SSID name is stripped off.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
It is possible that connect callback is called when shell is not
yet set. Make sure to check this and fallback to use printk() if
shell_printf() cannot be used.
Fixes#10617
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The connect command parameters were not checked properly if
user decided to supply only mandatory parameters.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the device does not support wifi offloading, then return -ENOTSUP
so that wifi support can be enabled for testing purposes even if
the actual device does not have wifi support. This is happens for
example in qemu which does not support wifi offloading.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Typo when calculating new value for local_time_n.low, the calculation
was just a constant expression and the value was not modified.
Coverity-CID: 188759
Fixes#10568
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we receive a valid gratuitous ARP request, then update ARP
cache accordingly. This feature is optional and by default
it is enabled, but can be turned off if needed.
This is similar to a feature available in Linux, and is enabled
by default in many distros.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The wifi mgmt does only support TCP/IP offload wifi chip,
while non-offload wifi chip can not scan/connect to AP.
Signed-off-by: Dong Xiang <dong.xiang@unisoc.com>
The wifi management interface was still using one SYS_LOG_DBG
macro call, replacing that with NET_DBG.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the debugging print calls are async, all the strings that might
be overwritten must use log_strdup() which will create a copy
of the printable string.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Currently logging subsystem supports quite small number of function
parameters. So split some long functions into smaller pieces.
Hopefully this is just a temporary patch and we can support more
parameters to logging macros.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of one global log level option and one on/off boolean
config option / module, this commit creates one log level option
for each module. This simplifies the logging as it is now possible
to enable different level of debugging output for each network
module individually.
The commit also converts the code to use the new logger
instead of the old sys_log.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The last parameter is 'period', we should not pass duration twice.
Doing so makes zephyr hang with current mainline when it is chosen to be
the Grand Master.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Completely remove the last_sync_receipt_timeout time. It is not part of
the standard (see 802.1AS-2011, 10.2.11 for the complete list of
variables for this state machine). Additionally this extra variable was
never really initialized so the calculated duration made no sense.
Just start the timer based on the regular sync receipt timeout time
interval from the port data set.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
This commits adds a possibility to select PTP clock accuracy through
KConfig.
The chosen accuracy should reflect the capabilities of the used
hardware.
See IEEE 1588-2008, chapter 7.6.2.5 for more details.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Implements GMCAP-1, GMCAP-2, and GMCAP-3 and their dependencies from
802.1AS-2011. See Annex A.10 for more details.
The Grand Master Capability can be turned on and off through KConfig.
Note: the correction field in FUP packets is not yet properly
calculated. There is a TODO left in the code, near which some parameters
are zeroed to make the correction field be set to 0. This mimics the
behavior of openAvnu (a Linux gPTP client). For full compliance the
field should be calculated and set properly.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Optimize memory usage of enums that are used within structs.
Reorganize the affected structs to avoid holes.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
SyncReceiptTime should use an ExtendedTimestamp (with fractional
nanoseconds precision). Add a struct with the definition of the needed
type and convert that variable.
The struct representing the ExtendedTimestamp is named
net_ptp_extended_time to keep consistency with the existing net_ptp_time
which is used for regular PTP timestamps.
See 802.1AS-2011 chapters 10.2.3.4 and 6.3.3.5 for more reference.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
There are other ClockMasterSync state-machines (to be implemented).
Current name would either cause conflicts or be too ambiguous.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Under GNU C, sizeof(void) = 1. This commit merely makes it explicit u8.
Pointer arithmetics over void types is:
* A GNU C extension
* Not supported by Clang
* Illegal across all ISO C standards
See also: https://gcc.gnu.org/onlinedocs/gcc/Pointer-Arith.html
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
This adds a int return to recv callback which can be used to notify the
stack about errors when receiving a packet. In addition to that the user
can return -EINPROGRESS to inform the stack the data will be processed
asynchronously which can be complete by calling
bt_l2cap_chan_recv_complete.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
New shell implementation is on the way. For now old one and all
references are kept to be gradually replaced by new shell.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Sync timeouts were calculated incorrectly - this led to a 'Multiple
Masters Issue' as denoted by PTP debugging software.
See 802.1AS-2011, chapter 10.2.4.2 for reference.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Fix the formula listed in help messages which is used to calculate
actual intervals given their log2 values.
It is all calculated properly in the code, because the unit of the
actual field uses the UScaledNs type of which the unit is 2^(-16)ns, so
it is just the help messages that got it wrong.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The return of memset is never checked. This patch explicitly ignore
the return to avoid MISRA-C violations.
The only directory excluded directory was ext/* since it contains
only imported code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
*_ll_src/*_ll_dst/*_ll_swap/*_ll_if were not self explanatory, ll
meaning "link layer" it's ambiguous what the names meant.
Changing to:
*_lladdr_src/*_lladdr_dst/*_lladdr_swap/*_lladdr_if to fix this.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add RX API to LLDP. Caller should register callback which is called
from ethernet_recv().
Fixes#9407
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The gptp stack size was not properly set, one must use
the K_THREAD_STACK_SIZEOF() macro to calculate stack size.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
CONFIG_NET_OFFLOAD was defined in Kconfig of net/ip/l2/, but actually
used by the code in net/ip/.
Fixes: #8646
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The code was not working properly if there was multiple timers
that were triggered in different times.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Refactor usage of net_sprint_ip*() where multiple
invocations are needed per single log call.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
irq_lock returns an unsigned int, though, several places was using
signed int. This commit fix this behaviour.
In order to avoid this error happens again, a coccinelle script was
added and can be used to check violations.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Instead of waiting forever for a network buffer, have a timeout
when allocating net_buf. This way we cannot left hanging for a
long time waiting for a buffer and possibly deadlock the system.
This commit adds checks to L2 and network support libraries.
Fixes#7571
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Up until now, Zephyr has patched Kconfig to use the last 'default' with
a satisfied condition, instead of the first one. I'm not sure why the
patch was added (it predates Kconfiglib), but I suspect it's related to
Kconfig.defconfig files.
There are at least three problems with the patch:
1. It's inconsistent with how Kconfig works in other projects, which
might confuse newcomers.
2. Due to oversights, earlier 'range' properties are still preferred,
as well as earlier 'default' properties on choices.
In addition to being inconsistent, this makes it impossible to
override 'range' properties and choice 'default' properties if the
base definition of the symbol/choice already has 'range'/'default'
properties.
I've seen errors caused by the inconsistency, and I suspect there
are more.
3. A fork of Kconfiglib that adds the patch needs to be maintained.
Get rid of the patch and go back to standard Kconfig behavior, as
follows:
1. Include the Kconfig.defconfig files first instead of last in
Kconfig.zephyr.
2. Include boards/Kconfig and arch/<arch>/Kconfig first instead of
last in arch/Kconfig.
3. Include arch/<arch>/soc/*/Kconfig first instead of last in
arch/<arch>/Kconfig.
4. Swap a few other 'source's to preserve behavior for some scattered
symbols with multiple definitions.
Swap 'source's in some no-op cases too, where it might match the
intent.
5. Reverse the defaults on symbol definitions that have more than one
default.
Skip defaults that are mutually exclusive, e.g. where each default
has an 'if <some board>' condition. They are already safe.
6. Remove the prefer-later-defaults patch from Kconfiglib.
Testing was done with a Python script that lists all Kconfig
symbols/choices with multiple defaults, along with a whitelist of fixed
symbols. The script also verifies that there are no "unreachable"
defaults hidden by defaults without conditions
As an additional test, zephyr/.config was generated before and after the
change for several samples and checked to be identical (after sorting).
This commit includes some default-related cleanups as well:
- Simplify some symbol definitions, e.g. where a default has 'if FOO'
when the symbol already has 'depends on FOO'.
- Remove some redundant 'default ""' for string symbols. This is the
implicit default.
Piggyback fixes for swapped ranges on BT_L2CAP_RX_MTU and
BT_L2CAP_TX_MTU (caused by confusing inconsistency).
Piggyback some fixes for style nits too, e.g. unindented help texts.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
If the driver has created start() and stop() functions, then those
are called when ethernet L2 is enabled or disabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The ethernet sending routine sent a corrupted ARP packet instead
of the actual IPv4 packet.
Fixes#9348
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
For example for Bluetooth IPSP, it is not needed to join solicited
node multicast group address.
From https://tools.ietf.org/html/rfc7668#section-3.2.2 :
"""
There is no need for 6LN to join the solicited-node multicast address,
since 6LBR will know device addresses and hence link-local addresses
of all connected 6LNs.
"""
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The LLDP protocol defines 2 separate agents, the Transmitters and
the Receivers. For the context of Zephyr, we are only interested in
the Tx agent, thus we drop any LLDP frames received by Zephyr.
LLDP frames are basically composed by an ethernet header followed by
the LLDP Protocol Data Unit (LLDPDU). The LLDPDU is composed by several
TLVs, some of them being mandatory and some optional.
Our approach here is having TLVs fully configured from Kconfig, thus
having the entire LLDPDU constructed on build time.
The commit adds NET_ETH_PTYPE_LLDP definition and related handling.
If CONFIG_NET_LLDP is enabled then ethernet_context has a pointer to
the struct net_lldpdu that belongs to that ethernet interface. Also
when CONFIG_NET_LLDP is enabled, the LLDP state machine will start to
send packets when network interface is coming up.
Currently the LLDP state machine is just a k_delayed_work() sending the
LLDPDU at a given period (defined by CONFIG_NET_LLDP_TX_INTERVAL).
Fixes#3233
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This are all the parameters defined by the standard (12.21.1).
Additionally the parameters that are read-only are validated in the
ethernet_set_config callback.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Unspecified address 0.0.0.0 was used as a requested IPv4 address
because the ARP message was generated second time. So for IPv4
autoconf ARP message, generate the message only once.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
There are too many individual requests for Qav related parameters. There
are more Qav parameters that need to be supported (and will be supported
soon - both on the GET and SET side). Handling it the way it was handled
so far would render the eth mgmt API dominated by Qav parameters. That
would make the file hard to read and understand.
Instead of that - use a single GET and SET requests for all Qav
parameters. This works by adding a separate enum with Qav request type
to the ethernet_qav_param struct.
Additionally this approach makes it much easier to document it all since
we now have just a single request and documentation comments in the
ethernet_qav_param struct.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Add calls responsible for getting and setting on/off status of Qav on
capable priority queues.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Add basic IPv4 Link Local support as described in RFC 3927.
Signed-off-by: Matthias Boesl <matthias.boesl@gmail.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
OpenThread L2 could've called multicast address registration multiple
times for specific address, which resulted in having multiple entries
containing the same multicast IPv6 address in Zephyr.
Checking if address was already registered prevents that.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
No need to keep technologies in main L2 directory so for consistency
create a directory for each of them and place each L2 component to
relevant L2 directory.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This makes use of the get_config callback added to the Ethernet API.
For now the only parameter to get is the number of available priority
queues.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Move struct members around in networking code so that we avoid
unnecessary holes inside structs. No functionality changes by
this commit.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that it is clear that we are suppose to fall through
a case statement.
Coverity-CID: 187078
Fixes#8989
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that we do not overflow when creating UScaledNS
value for interval.
Coverity-CID: 187079
Fixes#8988
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The advantage to this approach allows drivers for
devices that already keep statistics data on hardware
registers to use those instead, rather than try to
replicate it the same counters again within the driver
itself.
The eth_native_posix.c driver though do not benefit
from this, is modified to use the new callback system.
Suggested-by: Jukka Rissanen <jukka.rissanen@intel.com>
Signed-off-by: Jonathan Yong <jonathan.yong@intel.com>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Remove some 'default ""' properties on string symbols too.
Also make definitions more consistent by converting some
config FOO
<type>
prompt "foo"
definitions to a shorter form:
config FOO
<type> "foo"
This shorthand works for int/hex/string symbols too, not just for bool
symbols.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This commit adds a possibility to use Qav (credit-based shaping) in the
ethernet drivers.
There are two parameters exposed through the mgmt api: deltaBandwidth
and idleSlope.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
There is no point in sending Announces with GM chosen in BMCA if it is
expired and InfoIS is changed to MINE.
Check where does the GM info come from and fill the Announce packet
accordingly.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The problem is that net_if_call_timestamp_cb only checked if the
callback was registered for the PORT which invoked the whole action.
There is a possibility, that the callback will be registered, and packet
A will be passed to eth driver. Before the driver is finished with
packet A, network layer will start handling another packet (B) - so it
will unregister the callback for packet A and register it for B. After
that the network driver will finish processing packet A and invoke the
timestamp callback. The mechanism would then only check if a callback is
registered for the port of the driver and invoke the callback for the
packet that was registered earlier (so A instead of B).
This commit fixes that by storing info not only about the port but about
the packet too.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Previously the newer one got dropped.
The older ones will be dropped in a way that the follow up messages for
them will not be sent.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The gptp port number starts from 1, so the check was incorrect.
Use the proper define values before printing stats.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
A small helper function will return information whether
a given network interface has VLAN enabled or not.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Do not clear pending PDELAY_REQ pointer when sending a new one.
Unref the state->tx_pdelay_req_ptr first and only then set the
new pointer value. This will prevent buffer leak if we miss the
response from the peer.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that the calculated ratio values are used just once.
Without this, if the ratio is even insignificantly larger than 1, the
actual clock quickly drifts to really large numbers. This causes the
sync procedure to restart too often.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The problem with the previous approach was that the response timestamp
callback which calls net_pkt_unref could be skipped if the callback was
already registered for another packet. The net_pkt_ref function was
always called which led to memory leaks.
This commit simply disallows handling multiple pdelay requests at once.
If the timestamp callback is already registered, the received request
will not be handled.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The issue was that the length field of the tlv extension in the sync
follow up packets was wrong. It is supposed to skip the length of the
header of that extension. The easiest fix was separating the header and
the actual contents into separate structs and that's what this commit
does.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
As the PTP clock should return the correct time, use that
instead of zephyr uptime for time as that has only ms accuracy.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use priority 3 (critial app) for outgoing event messages (Sync,
Pdelay_Req and Pdelay_Resp). Use priority 6 (Internetwork Control)
for all other outgoing packets.
See IEEE 802.1Q chapter 8.4.4 for more details.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
An ARP entry, if not free, will be either in pending list or in the ARP
table. What differentiate both is the type of data they hold: either a
pending packet or an actual ethernet address.
It is then possible to unite these 2 attributes to save 4 bytes
per-entry.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Until now, each ARP entry had a k_delayed_work to be used as a timer
when the ARP entry is a pending one, waiting for the ARP request to
succeed in order to get to the ARP table.
But k_delayed_work is not a small object (40 bytes). Thus reworking the
ARP request timer by having one central k_delayed_work and a timestamp
in every ARP entry properly handled at every timeout (1+ entry might
have reached the timeout then).
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Instead of looping over the entries array, which will keep the same
order, let's use slist: one for free entries, one for pending ones and
finally one as the actual ARP table.
This permits some optimizations in how to look up and making small
heuristics by changing entries order when it seems relevant.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The application does not do much, it just registers to a callback
in order to get information about gPTP.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The subsys/net/ directory is more logical place for L2 code instead
of ip/ directory. No functionality changes by this commit.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>