Commit graph

21 commits

Author SHA1 Message Date
Kumar Gala
a1b77fd589 zephyr: replace zephyr integer types with C99 types
git grep -l 'u\(8\|16\|32\|64\)_t' | \
		xargs sed -i "s/u\(8\|16\|32\|64\)_t/uint\1_t/g"
	git grep -l 's\(8\|16\|32\|64\)_t' | \
		xargs sed -i "s/s\(8\|16\|32\|64\)_t/int\1_t/g"

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2020-06-08 08:23:57 -05:00
Marc Herbert
2cd51a33ce samples: make find_package(Zephyr...) REQUIRED
This provides a better error message when building with CMake and
forgetting ZEPHYR_BASE or not registering Zephyr in the CMake package
registry. See parent commit for more details (split from parent for
better readability).

Signed-off-by: Marc Herbert <marc.herbert@intel.com>
2020-05-29 10:47:25 +02:00
Daniel Leung
ec9a413983 boards: x86: make up_squared default to x86_64
This makes the up_squared board default to x86_64.
This also adds a new board, up_squared_32, for when 32-bit
is desired.

Signed-off-by: Daniel Leung <daniel.leung@intel.com>
2020-05-19 19:19:51 +02:00
Torsten Rasmussen
407b49b35c cmake: use find_package to locate Zephyr
Using find_package to locate Zephyr.

Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.

Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.

It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.

Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
2020-03-27 16:23:46 +01:00
Daniel Leung
be8ca9da96 samples: up_squared/gpio_counter: update to new GPIO API
Update the gpio_counter sample app for the UP Squared board:
() Update configuration calls to use new flags.
() Separate pin configuration into setting it to input, and
   setting the pin for interrupt.
() Use gpio_pin_set() instead of gpio_pin_write().

Signed-off-by: Daniel Leung <daniel.leung@intel.com>
2020-02-05 12:00:36 +01:00
Jennifer Williams
6c2d25204c samples: boards: Add readme for gpio counter.
This adds a README.rst for the UP Squared board GPIO counter sample
using details in the application source code and giving context.
This offers overview, requirements, and instructions to build and
flash, in complement to the cited reference.

Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
2019-12-09 12:45:04 -05:00
Anas Nashif
a2fd7d70ec cleanup: include/: move misc/util.h to sys/util.h
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.

No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.

Related to #16539

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2019-06-27 22:55:49 -04:00
Anas Nashif
9ab2a56751 cleanup: include/: move misc/printk.h to sys/printk.h
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.

No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.

Related to #16539

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2019-06-27 22:55:49 -04:00
Anas Nashif
6aa9c3a68f cleanup: include/: move gpio.h to drivers/gpio.h
move gpio.h to drivers/gpio.h and
create a shim for backward-compatibility.

No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.

Related to #16539

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2019-06-27 22:55:49 -04:00
Anas Nashif
3ae52624ff license: cleanup: add SPDX Apache-2.0 license identifier
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier.  Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.

By default all files without license information are under the default
license of Zephyr, which is Apache version 2.

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2019-04-07 08:45:22 -04:00
Anas Nashif
da5f185e06 samples: add test identifier
Add unique identifier instead of just 'test' for samples.

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2019-03-29 17:44:11 -04:00
Daniel Leung
f7a42a70f8 gpio: intel_apl: rework driver for pin_mask callback
To avoid confusion, callbacks using ordinal pin numbers
is going to be reverted. So the driver has to be re-worked
to expose multiple devices so each device has 32 pins.

Also fixes #12765

Signed-off-by: Daniel Leung <daniel.leung@intel.com>
2019-02-06 07:18:15 -05:00
Anas Nashif
5060ca6a30 cmake: increase minimal required version to 3.13.1
Move to latest cmake version with many bug fixes and enhancements.

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
2019-01-03 11:51:29 -05:00
Patrik Flykt
079f55d519 samples: Add 'U' to unsigned variable assignments
Add 'U' to a value when assigning it to an unsigned variable.
MISRA-C rule 7.2

Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
2018-12-04 22:51:56 -05:00
Kumar Gala
a0b660730f samples: Add explicit zephyr_include_directories to get <board.h>
There are a small handful of samples that still utilize <board.h>
include, to minimize the use of <board.h> to these specific cases and
allow us to remove adding the board dir to the top level include search
path, we explicitly in each sample add the specific board dir it needs.

For the microbit cases these could be replaced by DTS support in the
future when the pwm_nrf5_sw supports DTS.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2018-11-15 09:14:07 -05:00
Kumar Gala
f210d11970 boards: Remove including soc.h in board.h
We should let drivers or board code include soc.h directly so we can keep
board.h to local info for board specific code.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2018-11-14 06:44:02 -06:00
Andrzej Głąbek
20202902f2 dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig
These changes were obtained by running a script  created by
Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following
specification:

1. Read the contents of all dts_fixup.h files in Zephyr
2. Check the left-hand side of the #define macros (i.e. the X in
   #define X Y)
3. Check if that name is also the name of a Kconfig option
   3.a If it is, then do nothing
   3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it
       has neither of these two prefixes
4. Replace the use of the changed #define in the code itself
   (.c, .h, .ld)

Additionally, some tweaks had to be added to this script to catch some
of the macros used in the code in a parameterized form, e.g.:
- CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS
- CONFIG_UART_##idx##_TX_PIN
- I2C_SBCON_##_num##_BASE_ADDR
and to prevent adding DT_ prefix to the following symbols:
- FLASH_START
- FLASH_SIZE
- SRAM_START
- SRAM_SIZE
- _ROM_ADDR
- _ROM_SIZE
- _RAM_ADDR
- _RAM_SIZE
which are surprisingly also defined in some dts_fixup.h files.

Finally, some manual corrections had to be done as well:
- name##_IRQ -> DT_##name##_IRQ in uart_stm32.c

Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 10:44:42 -06:00
Daniel Leung
a87a6d82ac soc: apollo_lake: fix build errors for GPIO due to DTS changes
The DTS changes introduced in 7ae220c845
changes the naming of GPIO related macros. This updates the usage
of previous macros via DTS fixup.

Fixes #10993

Signed-off-by: Daniel Leung <daniel.leung@intel.com>
2018-11-02 21:58:02 -04:00
Daniel Leung
69ede2f1ce boards: up_squared: add GPIO sample to sanitycheck
This changes the sample.yaml so that it can be included when running
sanitycheck.

Fixes #10994

Signed-off-by: Daniel Leung <daniel.leung@intel.com>
2018-11-02 21:58:02 -04:00
Reto Schneider
7eabab2f5d samples, tests: Use semi-accurate project names
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming every project "NONE"
defeats this functionality.

This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names in the samples (and again, in
the tests folder) folder, small manual adjustments have been done.

Signed-off-by: Reto Schneider <code@reto-schneider.ch>
2018-10-27 21:31:25 -04:00
Daniel Leung
79e8f79498 boards/x86: up_squared: add sample app for GPIO
This adds a sample app to utilize GPIOs on the UP Squared
board.

Origin: Original

Signed-off-by: Daniel Leung <daniel.leung@intel.com>
2018-09-19 21:36:16 -04:00