... because it is (required).
This makes a difference when building with CMake and forgetting
ZEPHYR_BASE or not registering Zephyr in the CMake package registry.
In this particular case, REQUIRED turns this harmless looking log
statement:
-- Could NOT find Zephyr (missing: Zephyr_DIR)
-- The C compiler identification is GNU 9.3.0
-- The CXX compiler identification is GNU 9.3.0
-- Check for working C compiler: /usr/bin/cc
-- ...
-- ...
-- ...
-- Detecting CXX compile features
-- Detecting CXX compile features - done
CMake Error at CMakeLists.txt:8 (target_sources):
Cannot specify sources for target "app" which is not built by
this project.
... into this louder, clearer, faster and (last but not least) final
error:
CMake Error at CMakeLists.txt:5 (find_package):
Could not find a package configuration file provided by "Zephyr" with
any of the following names:
ZephyrConfig.cmake
zephyr-config.cmake
Add the installation prefix of "Zephyr" to CMAKE_PREFIX_PATH or set
"Zephyr_DIR" to a directory containing one of the above files. If
"Zephyr" provides a separate development package or SDK, be sure it
has been installed.
-- Configuring incomplete, errors occurred!
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
A second semaphore is used for the second trickle timer, so that if the
first timer expires twice before the second one, the test would still
wait before proceeding to check on cb_2_called.
Fixes#18598.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Noticed this error print when running in mps2_an385 platform.
<err> net_if: There is no network interface to work with!
Adding CONFIG_NET_LOOPBACK=y removes this error. After this
the CONFIG_NET_IPV6_MLD=n needed to be added in order to avoid
crashes when IPv6 MLD is done which is not needed for this test.
Removed also the whitelisting as that is not really needed and
we want to run these in as many platforms as possible.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Remove network specific default and max log level setting
and start to use the zephyr logging values for those.
Remove LOG_MODULE_REGISTER() from net_core.h and place the
calls into .c files. This is done in order to avoid weird
compiler errors in some cases and to make the code look similar
as other subsystems.
Fixes#11343Fixes#11659
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming every project "NONE"
defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names in the samples (and again, in
the tests folder) folder, small manual adjustments have been done.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
Run networking tests for native_posix, qemu_x86 and qemu_cortex_m3
platforms only as the tests are generic enough so no need to run
them in real physical device.
Fixes#9623#9614#9622#9621#9618
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Prepend the text 'cmake_minimum_required(VERSION 3.8.2)' into the
application and test build scripts.
Modern versions of CMake will spam users with a deprecation warning
when the toplevel CMakeLists.txt does not specify a CMake
version. This is documented in bug #8355.
To resolve this we include a cmake_minimum_required() line into the
toplevel build scripts. Additionally, cmake_minimum_required is
invoked from within boilerplate.cmake. The highest version will be
enforced.
This patch allows us to afterwards change CMake policy CMP000 from OLD
to NEW which in turn finally rids us of the verbose warning.
The extra boilerplate is considered more acceptable than the verbosity
of the CMP0000 policy.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
No need to run the tests in real hardware as there we can run
out of network buffers that happened with Atmel SAM-E70.
Fixes#8966
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The cb_[1|2]_called variables were initialized just before running
the test. This was too late as in some cases the Trickle timer
was triggered before the variables were init, which then caused the
test to fail even though there was no actual timer failure.
This was seen with frdm_k64f and when CONFIG_BOOT_DELAY=1000 was set.
Fixes#8658
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of completely excluding those tests, mark them as skipped and
provide an noop function that marks the test as skipped where test is
not supported.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
This should clear up some of the confusion with random number
generators and drivers that obtain entropy from the hardware. Also,
many hardware number generators have limited bandwidth, so it's natural
for their output to be only used for seeding a random number generator.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
In many networking tests we had to configure SLIP in the prj.conf
leaving those configurations Qemu specific. This change enables SLIP for
QEMU targets automatically and allows reuse of prj.conf for multiple
boards.
Additionally, the TUN options is removed. This option was not used
anywhere.
To enable self-contained networking tests that do not depend on SLIP, we
introduce the new option NET_TEST which disables TAP and allows testing
in QEMU without the need for a host interface.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The Imax doublings value was too large which caused overflow
of Imax_abs value, which then could cause Trickle test to fail.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The majority of these fixes adjust the memory limit needed to build the
various tests on systems with and without BLE support. We also fixup
one test case that was able to run on platforms with 16k of memory.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Instead of only running net tests in qemu_x86, enable those
tests in all suitable platforms. The tests are disabled for
bbc_microbit as that platform does not have enough memory.
The tests/net/arp and tests/net/ieee802154/l2 are disabled
for qemu_xtensa as the qemu crashed when running the tests.
For tests/net/all there was a weird build error for qemu_xtensa
so that test is also disabled for that platform.
Increased the trickle timeout to 3 secs in tests/net/trickle as
occacionally there was timeout error in qemu_cortex_m3 when the
test was run.
Jira: ZEP-2398
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We have many testcases doing filtering both on the architecture level
and the platform level, which is redundant. Also many testcases are
running the same test twice on the same SoC for no good reason, cleanup
the tests and cleanup the filtering.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This will prepare test cases and samples with metadata and information
that will be consumed by the sanitycheck script which will be changed to
parse YAML files instead of ini.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
There have been long lasting confusion between net_buf and net_nbuf.
While the first is actually a buffer, the second one is not. It's a
network buffer descriptor. More precisely it provides meta data about a
network packet, and holds the chain of buffer fragments made of net_buf.
Thus renaming net_nbuf to net_pkt and all names around it as well
(function, Kconfig option, ..).
Though net_pkt if the new name, it still inherit its logic from net_buf.
'
This patch is the first of a serie that will separate completely net_pkt
from net_buf.
Change-Id: Iecb32d2a0d8f4647692e5328e54b5c35454194cd
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is a start to move away from the C99 {u}int{8,16,32,64}_t types to
Zephyr defined u{8,16,32,64}_t and s{8,16,32,64}_t. This allows Zephyr
to define the sized types in a consistent manor across all the
architectures we support and not conflict with what various compilers
and libc might do with regards to the C99 types.
We introduce <zephyr/types.h> as part of this and have it include
<stdint.h> for now until we transition all the code away from the C99
types.
We go with u{8,16,32,64}_t and s{8,16,32,64}_t as there are some
existing variables defined u8 & u16 as well as to be consistent with
Zephyr naming conventions.
Jira: ZEP-2051
Change-Id: I451fed0623b029d65866622e478225dfab2c0ca8
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If we receive lot of packets, it might happen that we exhaust
all the DATA buffers in the system. This would prevent from
us sending anything to the network.
Change this by splitting the DATA buffer pool into RX and TX
parts. This way RX flooding cannot consume all DATA buffers
that needs to be sent.
Change-Id: I8e8934c6d5fdd47b579ffa6268721b5eb3d64b6d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
To customise test builds and support test related features such as time
stamps and a boot banner, introduce a Makefile variant that is dedicated
to testing.
Initially we introduce a new config overlay that is used for all tests, in
this case we enable BOOT_BANNER and BUILD_TIMESTAMP. This will print the
current version and the date, useful when reporting bugs and also an
indicator that the system has booted before the test has started.
For example:
[QEMU] CPU: qemu32
***** BOOTING ZEPHYR OS v1.6.99 - BUILD: Dec 21 2016 19:57:13 *****
tc_start() - Test Nanokernel CPU and thread routines
Initializing nanokernel objects
...
..
Change-Id: I224318cdeb55a301964ea366dbc577e2e3a09175
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Restructure the RANDOM Kconfig to match the structure used in other
drivers with a single top level menu. Move the true random number
generators to appear first in the menu, with pseudo generators at the
bottom. Do not present pseudo generators if a true random generator
is presented.
This change implies that tests, samples and applications that require
the random driver interface must now select CONFIG_RANDOM_GENERATOR.
In order for tests and samples to build (and run) on platforms that
have no random driver it remains necessary to select
the CONFIG_TEST_RANDOM_GENERATOR.
Note that CONFIG_TEST_RANDOM_GENERATOR retains its original purpose of
enabling a random driver that delivers non random numbers for the
purpose of testing only.
Change-Id: I2e28e44b4adf800e64a885aefe36a52da8aa455a
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
* Moved networking code into subsys/net.
* Renamed net/yaip to net/ip at the same time.
* Fixed the tests/net to compile
* Fixed the Makefiles and Kconfig files in subsys/net
to use the new location of the IP stack
Change-Id: Ie45d9e8cb45a93fefdf969b20a81e3b1d3c16355
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the native IP stack is now the default, there is no need
for corresponding Kconfig option.
Change-Id: I08e4992f540f928a2b7378e8803e634e38725348
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
There were different tags defined in testcase.ini files for
networking tests. Unify these and change the tag to "net"
in all networking tests. This makes it easy to execute
all network tests via sanitycheck.
Change-Id: I8ce7ccf8cccca35234602e37f6568db0b986d181
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Dropping legacy API. This commit also contains updated
unit tests in order to pass the test.
Change-Id: Ibc7426837e2f4f23bb5f3ed3719635c5c3d0ed0f
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Adapting all unit tests so:
- main task's prj.mdef is already provided by unified kernel with a
default stack of 2kb.
- unified is the only kernel to be used now, removing unecessary kernel
type make option.
- removing all NANOKERNEL/MICROKERNEL related #ifdefs and so on.
Change-Id: I9b853dbd2aef971d355188cbf7fe2ececaaa80c1
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
One second timeout seems to be too short as some test runs
fail when run in Jenkins.
Change-Id: Ifb01929148415961712468e3cc85387aac5eb2bb
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Some of the DEBUG options for the new IP stack still used
the CONFIG_NETWORK_IP_STACK_DEBUG_ prefix.
Change-Id: I8f039ac5e303a7c571a870403ce17d758db540d5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
- new stack options are renamed and placed in their respective menus
- new stack Kconfig gets normalized (tabs vs spaces, etc...)
Change-Id: Ia68f6589fed464bbdd76dc0812775684b2f94a58
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
We are not just checking the test build but this time
the tests are also run.
Change-Id: I7b0b24c51dfc2dc58f290cca7a593be431b8077f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is only meant for the new IP stack.
Change-Id: I643b0556f87423f09555274749db93397ef66c59
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
