Start with a new linker file every time we run make. Otherwise
we fail.
Change-Id: I3abe9c203dcfe8710e6c4946662959bfeb6a6bc9
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We use the microkernel/nanokernel naming convention,
so run qemu with the right file.
Change-Id: I6cedf34f85693d6026c450904e1ce72c435baa06
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit adds support for the qemu target.
This target will generate the kernel binary and will
launch a qemu instance running the binary.
Currently, only the x86 generic pc and the arm tilm3s6965
BSPs are supported with emulation.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I9e71d3ce2fba98572830475a2e15e3fceb0216b4
This commit changes the name of the output files.
The output names tinymountain.* have been changed to
microkernel.* and nanokernel.*.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Ia73daa35bb8e44972065af3a217bf87335169dac
This commit adaptes the Kbuild system to the change of location of
the header files for drivers.
Old location: driver/
New location: include/driver/
Change-Id: Ic49d373149ee44d781419c5c68e59408c8ef1c11
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit add support to the Kbuild system for the
NUM_TASK_PRIORITIES Kconfig symbol and the corresponding sysgen
parameter.
Change-Id: I6b035437c86d62f72c25d696d18182a7b0448e8f
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit adds Makefiles for each sample test in the project.
The Makefiles integrate the test samples into the Kbuild system.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I8d84756836c1f7d00dc823d7ff76334c75304d66
This commit allows the Kbuild system to specify the
Cortex processor as a toolchain link parameter by
reading the kconfig configuration options.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I29296fb255810b6bc5e14637c9000e054ac5deb2
This commit fixes issues to allow build on ARM architecture.
- It fixes the include paths in Makefiles.
- It fixes the include path for the offsets.c compilation.
- It fixes the linker command. This changes is needed because gcc
ARM cross-compiler does not accept an AT() command without
specifing an address explicitly. This corner case appears
on ARM architectures when XIP is disabled.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Ief8b53c4cc154abba7b7827121ec5a56f62b7b26
This commit removes the Kconfig symbol KERNEL_DIR.
The symbols was no longer needed because sysgen is only
used on microkernel architectures and the value of
KERNEL_DIR is always "ukernel", therefore it is redundant.
Change-Id: I5e38dd431c5b6f7586e8b25aea330632e96f581f
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit fixes the include path for quark BSP.
Change-Id: Idb9b5124476c0bec2d16a143407cd9d0c42e0801
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit adds the defconfig files that define the standard
configurations for x86 and arm architecture and the standard
configurations for the following BSPs for microkernel and
nanokernel:
- x86 generic pc
- x86 quark
- arm fsl_frdm_k64f
- arm ti_lm3s6965
They can be applied using the make target defconfig.
This target will generate the corresponding .config
file that will be consumed by the build system.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I128ad52f792eeb61cc80578be5fc3bd427447aaa
This commit substitutes references to the linux string in variable
names.
It changes the LINUX prefix and uses the TIMO prefix (short for
tiny mountain)
It changes the vmlinux prefix for tinymountain prefix.
It preserves linux references found in licenses, comments giving
credits and from scripts that are not supported by the current build
system yet, like rpm generation.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Id17d8d12161f00e2a2ff38f218cdb6c5afd169c0
This commit is adding the linking process.
-Creates linker command files.
-Creates IDT tables.
-Creates final ELF file.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I3ce92868b00957fdc24a361cc419e3548f475cc3
This commit adds all Kbuild CFLAGS to build the kernel binary.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Ia4ca1b71b4e68c4515c428147a8814ca983bb541
This commit fixes the target clean functionality.
Originally, the clean and mrproper targets search for the
Documentation and samples directories and their respective
Makefiles.
Our current directory structure is not including Documentation
directory yet. Also, there is not support for a global Makefiles
at samples directory.
This commit deletes references to Documentation directories for
clean and mrproper targets as well.
Also, This commit deletes the reference to sample directory for
clean target.
Finally, this commit temporary fixes the references to assembly
files .s extensions. This has been marked as a BUG until all .s
files can be renamed to .S files.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I4c95c2eed4b5756843ecb9021d03401289522586
This commit organizes the different directories listed in the
root Makefile. Each directory hold a root Makefile describing
libraries and object bundles that will be linked together as
the kernel binary.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I4af16114598ad985dfb4faac68e82dc73b1b6cc5
This commit adds the capability to the Kbuild system of adding
samples and projects to the build process.
This commits adds the hello_world and philosophers sample code
as an example of how to configure a project into the build
system.
The project can be hosted inside the kernel source tree or
outside the kernel source tree.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Id980e959ac6e0061f8227d5d81191a169bfc8fc3
This commit adapts the root Makefile to generate the version.h
header with the format expected by embedded os.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Ib394ad6b3fab4f02f6953d83d04f13404df87832
This commit adds the target to generate the offsets.h header.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I6222f7478ade33f5ca130eea8637cb454b67eaab
This commit adds the target to generate the configs.c source file.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Ia068a20c3b76c78f5bdd041f6e19daabd2107a5a
This commit adds the target to execute sysgen.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I31f2e896274fa5ddfe6c10b4ccfb07ff6704c130
This commit adds the target to generate the configuration file prj.vpf.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I407b304d33fe27daf92e6049377930cca484fde5
Adding the root Makefile from linux 3.19-rc7 Kbuild as is.
This Makefile will be modified and adapted to the current build
system in following commits.
This is done with the intention to help the revision of changes
that were done to the original Kbuild Makefile.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Ib897553d4d073dc3e3dab702b87b92a6f82cd804
This commit adds the Makefiles to create object-bundle for
libc minimal.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I9d15e0203664010ba4ef5cf3625b4075d7827ad7
This commit adds the Makefiles that describe the object-bundles
for the drivers directory and every subdirectory below.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Id77cff9cf0ab51827acc2aef32cbed3ec3ad586b
This commit creates all the Makefiles that describe the object-
bundles for the arch directory and every sub-directory below.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Icb4ebcfc430a132e514507149ad5ab6878eeed64
This commit creates the Makefiles that describe the object-bundles for
the kernel directory and every sub-directory below.
It also includes the misc Makefile.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I847e79a40ced0b1d8370b893cd95c15efc7e5147
This commit adds the Kconfig files that describe the CONFIG
symbols that belongs to the drivers directory and subdirectories.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I924835ece11a3d597e77a55ace21d724dd5ddbe5
This commit adds the Kconfig files that describe the CONFIG
symbols that belongs to the arch directory and subdirectories.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I744225ddaa5e2b45113ca049457a8f9925ebe4c2
This commit adds the Kconfig files that describe the CONFIG
symbols that belongs to the kernel directory and subdirectories.
It includes the misc directory Kconfig as well.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I3e653562ea5c259203a63274197e3a0e1522ecc4
This commit adds the Kconfig root file.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Id9478012376bfd19475bf08fd75aacad9048ce27
The code was incorrectly using RX_STACK_SIZE instead of
CMD_RX_STACK_SIZE.
Change-Id: I4a8ddb700e2a701bf8572ed877865a7d0cb3b2d0
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Some hci_core.c debug logs were still incorrectly using the old
bt_bdaddr_str API.
Change-Id: I92ce4544c44266216225b4d9a20e639a2fefa9d0
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
An extended inquiry response or advertising data packet shall not contain
more than one instance for each Service UUID data size.
Change-Id: I41d1a25fdcb2987e8d0cadfb2110fd62b3685f17
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add a GATT debug config option to be able to limit the debug logs only
to the GATT submodule.
Change-Id: Ie486c9125070f32506547f981c704eaf3e9f2377
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Read attributes matching value and handle range generating a proper
response:
< ACL Data TX: Handle 3585 flags 0x00 dlen 9
ATT: Find By Type Value Response (0x07) len 4
Handle range: 0x0001-0x0005
Change-Id: I8001afa2b22e804bef3778d0509d17b01a8d597c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Read attributes matching UUID and handle range generating a proper
response:
< ACL Data TX: Handle 3585 flags 0x00 dlen 20
ATT: Read By Type Response (0x09) len 15
Attribute data length: 7
Attribute data list: 2 entries
Handle: 0x0002
Value: 020300002a
Handle: 0x0004
Value: 020500012a
Change-Id: Iaf4b0c963765a7769a17144a4d394dce8555c2d3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This replace the old code that could only compare 16 bits UUID with
bt_uuid_cmp which can expand to 128 bits if types don't match.
Change-Id: I84219d451d8c95baf6f7e42b92629cb106428ccf
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
bt_gatt_foreach_attr iterates over attributes via callback, it will be
used to implement discovery functionality.
Change-Id: Ice66f4b3d0d12b3616986931d5da0fe0f202e533
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
bt_uuid_cmp compares 2 UUIDs returning if they match, if the types are
different it converts both to 128 bit format before performing the
comparison.
Change-Id: Iacf330cc0271a7e5429cbb2f405a7d9ef249a1a3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
