The print about packet length is the data part of the length
and does not include the ll header.
Change-Id: Ia66eb830796a572ffa416df1e6d0badcbe9f9aac
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Now uses net_nbuf_ll() to point to link layer header.
Also the ARP req test passes properly.
Change-Id: If649ff19a064490bff33d03b4ce70ef11bfa7cd5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is shorter to write and less error prone.
Change-Id: I67d3b75e0b39f58a4ea655e91530dff6f9fcc6e0
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use 192.0.2.0/24 address space specified in RFC 5737.
Change-Id: Iff2545f5b0f4817c99813c986d57801e166967a3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This helps to avoid ARP cache poisoning.
Change-Id: I3cc2adcc3d06520fecfdccc3b415575bb714e27b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If user is setting the IPv4 address to a given network interface
manually and when lifetime is set to infinite, then set the
state of the address to preferred.
Change-Id: If6e331ac5655d0df0d3b67bb07bcf8cd06351e3d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If CONFIG_SLIP_TAP is defined, then ethernet link layer header is
used before the packet.
Change-Id: I3d266017f85683999d3c67de49b75b60686d7ba7
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Small IPv4 ARP cache that is used in Ethernet networks.
Change-Id: I9ab38ee14a799f8573f4d4e0eade1be107d42f1a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The network device driver can specify what kind of functionality
it supports. Currently there exists one flag that can be used
in ethernet devices that tells that ARP should be enabled.
Change-Id: Ieaaefcfc7cdd65f44190248f507ac3cb512a323e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Making sure we are doing the IP address assignment correctly.
Change-Id: I8bf9233b932321a14df99ce49a39581f1343d004
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The fix prevents the net_nbuf_unref() from removing fragment
list if the top level net_buf is not removed.
Change-Id: Ice580c25bd74f3239c01321f2b9d61cc8c0c9c1d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of using hard coded net_if, get the default network
interface using net_if_get_default() function.
Change-Id: I6248555ce57ae5196adea7baa9db325660a71255
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This just renames the existing net_buf helper APIs to corresponding
net_buf_simple APIs and then defines the old net_buf API names as
macros mapping to the new net_buf_simple helpers.
Change-Id: I3c2b35683c0fde66f5f697be2c34c01172af8e31
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The object has the same layout as the last fields of the existing
net_buf. To maintain backwards compatibility net_buf receives a union
so that the old data, len and size members can be accessed as before,
however they are located in the same memory as the actual
net_buf_simple members.
Change-Id: I22d208faba30fe41c5ada17e6d13e641f528729a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is in preparation of introducing a new net_buf_simple object &
API.
Change-Id: I624b86e5d2c9f4e9d3647b2fe21ce8b89750256f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Now that net_send and net_reply yield, this behaviour should be
documented.
Jira: ZEP-469
Jira: ZEP-497
Change-Id: I8c3cf7bda009aa6e89f880447fd3b6a491f5d9ef
Signed-off-by: Jaakko Hannikainen <jaakko.hannikainen@intel.com>
Update whitelist to filter out unnamed structure warning
while building documentation.
Change-Id: I7f983bc125589800c5118a745ebf7b6849f44833
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
If privacy is disabled and static random address is used for identity
we need to restore static address before enabling advertising.
Otherwise NRPA used for any previous active scan could be used instead.
Change-Id: Ifea0d2863d78060c84e61d89ef384a94e86895b6
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Use IOAPIC_EDGE instead of IOAPIC_LEVEL to fix missing interrupts.
During tests it was found that using IOAPIC_LEVEL interrupts for UART at
some points are lost.
Proposed by Calando, Antoine <antoine.calando@intel.com>
Change-Id: I18b20217c4d73fdeaa424bf59d00f6be1ec6ef1b
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
These two boards don't have enough RAM to effectively run this
test case without making the stacks so small they don't work
on other platforms. ARM is sill covered by other boards.
Change-Id: Ibf20eefaf29f989cbb6da6cd3a8eeed2faa1950b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Call ICMPv4 handler when receiving such a network packet.
Currently only echo-request is handled.
Change-Id: Ib59c65b38f13c484f1842485118dad32fb6a6f36
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Call ICMPv6 handler when receiving such a network packet.
Change-Id: I2ebe612bd4a4615e8cd1c8b323507c6a03f6008d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The host will be able to respond to ICMPv6 messages.
An echo-request handler is implemented and it will send
echo-reply when needed.
Change-Id: I08f4703bab5cf3e95d3ae722ebc7a386d22fe17e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Right now there are tests for IP packet checksum calculation.
Change-Id: I1e9e72d01d4690728269c4484f8628350cf95729
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Various network utility routines can debug print after this.
The Kconfig option is called CONFIG_NETWORK_IP_STACK_DEBUG_UTILS
Change-Id: I8384f974bd3c4965a6ef401bff8060389fab51ad
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Added function that is used when calculating various IP
protocol checksums. The function works with fragmented
net_buf data.
Change-Id: Icaef707ba15ac2729608929e52e235e6e8a154dc
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Only usable if network debugging is activated.
Change-Id: Id7d70d88b5ddca772603e5d2c567b8df23cf084e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Each network interface needs its own stack for TX fiber.
Change-Id: I9647c2b945a3d36bc77c00dad11badb0d5f851e5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This function is not meant to be used by applications as it
requires that the IP headers etc. are already in place.
Change-Id: I9099671111a029cdf630d131d7af09b147486f64
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Renamed net_recv() to net_recv_data() so that the more generic
name can be used by applications. The net_recv_data() is only
meant to be used when L2 layer feeds data into L3 (IP) layer.
Change-Id: Iba155d51f81e3b99964fa916fe87a05a8bf8766a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
A default hop limit can be configured via Kconfig.
Change-Id: I5cbd130882e043e24488c4501e86fce0f91d48df
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Making all big IP address print functions inline will increase
the code space too much. So moving the big functions to utils.c
and just leaving the stubs to be inline. These functions are
available only when debugging is activated.
Change-Id: Ib76846d282a821e99885ec1801df4302bb0c9b42
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add a macro to get and cast the ICMP protocol header.
Change-Id: Ief3f69d1b3dbe9dd55bc0a032b3506c8e0370563
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The nbuf macros for getting the pointer to start of IP, UDP
and ICMP buffer were incorrect.
Change-Id: I6309bd50cdf2cbf0c6c23b4b349c7c084cfe928d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Some API functions that check IP addresses were not documented
properly.
Change-Id: I0e7361447db55037888c62ada6b55e3cf5f410f7
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Check if we have received IPv4 packet and call a handler
function to process it.
Change-Id: I9f9e5f0888d2c3b91401c98f4925647ddce09962
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that the net_if.c compiles correctly when IPv6 and IPv4
are activated in config file.
Change-Id: Icaeba2c2ac7003ffaba516afd476991bf150165d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Added more functions to get proper IPv6 address from
a given network interface.
Change-Id: I5aecdb35eb549a0781949134ab4821dcb8ce9e7b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
These tests will check that caller is able to set IPv4 address
to a network interface and check if an address is one of the
assigned to a network interface.
Change-Id: I8aa748c40fbc02eef50ccf76d10a0057ef29021b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
