Rewrites the timestamping logic to always generate timestamps
via a function pointer that is initialized to sys_cycle_get_32(),
but can be changed to point to a user-supplied function. This
eliminates the need for an if/then/else construct in every place
that a timestamp is generated.
Change-Id: Id11f8c41b193a93cece16565978a525056010f0e
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Makes the purpose and capabilities of the kernel event logger
clearer, and leaves much of the low-level detail relating to
use of the configuration options and APIs to the configuration
option guide and API guide, respectively. Also corrects some
bugs in the example code for retrieving event information.
Also updates the API guide to make a clear distinction between
the general purpose event logger framework and the kernel event
logger (which is a specific instance of this framework).
Change-Id: I924f65092b2b0e5050af13376b5da85a6cdc1a65
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Prepares the kernel event logger APIs for inclusion in the
API guide. Also corrects a couple of other issues:
* Gets rid of obsolete thread monitor code.
* Renames "timer_func" global variable to "_sys_k_timer_func"
to align it with kernel naming conventions.
Change-Id: I93d403f83ae44ff45dda489c2ead7bfec6ce1fa3
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Event logger APIs still express timeout delays in ticks;
need to convert to milliseconds when using unified kernel APIs.
Change-Id: I5fab66be660621cd2029417eaff3758e3ef4ba2c
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
If an i2c transaction fails the sample will hang the program into
an infinite circle.
This commit will remove the infinite circle and report back the
error code from the i2c transaction.
Change-Id: I38d350a805af6bec43f2fa8d4af6ce4e3cc27662
Coverity-CID: 151991
Coverity-CID: 151992
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
If the gpio or spi devices are not found there is no
need to keep the device busy in a loop for this particular
sample.
Since it is not possible to continue execution it is better
to simply end the application.
Change-Id: Ie25ea970a479db2a2f339ca2b37f88541a45ef97
Coverity-CID: 151973
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
When an option code or length representation is encoded in a 16-bit
value, the access was wrong.
Coverity-CID: 151963
Change-Id: Ie7741998cbde348ccf490a6686e68a1ace99920e
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Enable this option to test any usage of structs and variables inside
macros.
Change-Id: I6ec64fb865e87fc0771ae10f0c4eb63f6144c88a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When moving arch-specific thread structure to arch-agnostic, some field
accesses were missed when used in K_DEBUG statements, which are turned
off by default.
Change-Id: Ife0f49b8185a0db468deab73555f7034f20ca3e8
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Prio should be an int, since values are small integers, not a fixed-size
int32_t. It aligns with the prio parameters of the other APIs.
Stack size should be size_t.
Change-Id: Id29751b86c4ad7a7c2a7ffe446c2a96ae83c77bf
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The divide-by-zero test was using an uninitialized variable that
Coverity was unhappy about. Simple fix to just initialize to any non
zero value.
Change-Id: I9e5865a99e7a8eb3ee52421cc3dcb6717dca1ad1
Coverity-ID: 152053
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Coverity complained about the use of strncpy() to fill up a buffer of
size N with a string of the same size didn't leave room for the final
\0.
This is a valid concern; however, the usage is valid too, as the
writer intended to create a pattern that later can be tested--addind a
\0 would break the pattern.
So instead, use memcpy() for the same function.
Change-Id: If52d02ce41731348f4a2d750c79f9e1c51f3afcf
Coverity-ID: 151947
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Coverity reported 150819 issue, which steams off Flex generated code
from zconf.l in which sprintf() was use. Because of that, the
conf_read_simple() @name parameter could be used to overrun
zconf_open() @fullname by crafting SRCTREE and KCONFIG_ALLCONFIG
environment variables.
Change-Id: I2cff817dccafe0e06b35636bbb7be95e062410af
Coverity-ID: 150819
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Coverity complains about using an uninitialized variable; there is no
reason to do so; thus fixed to avoid maintaining a whitelist.
Change-Id: I657f9e7d46b1b9b091e36638c1951b93903fbec3
Coverity-ID: 152048
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
This is not a strictly necessary initialization, as the data is not
used, but will keep Coverity happy. It being a testcase, there are no
size or speed penalties to the overall kernel and avoids having to
manage a whitelist for an issue in scanning tools.
Change-Id: I0ddcf43ca1114356d58f93de57232864246ffe07
Coverity-ID: 152052
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Coverity complained about the code using an uninitialized chunk of
memory; harmless, but fixed to avoid having to whitelist.
Change-Id: I5c890ff78fab2799b882b8e4a25c15476702d132
Coverity-ID: 152049
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Fix usage of an uninitialized variable detected by Coverity.
In theory GCC should pick up this situation, but it does not. I've
experimented with adding -Wextra and -Wuninitialized but I cannot get
GCC to complain. I might be missing something else, but in the
meantime, this is a simple fix to remove this issue.
Change-Id: I6fec37719719dfaf7077ce1f464605c93efa8ea2
Coverity-ID: 152054
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
This patch addresses the following issues:
* Aligns the Kconfig code style with Zephyr projects requirements.
* Removes redundant "depends on" from Kconfig.
* Adds static to the containing file scope declarations.
Change-Id: I03326a800392cffda00b47949981b7e6d119b90f
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Pinmux driver almost certainly should be initialized before the
rest of hardware devices (which may need specific pins already
configured for them), and usually after generic GPIO drivers.
Thus, its priority should be between KERNEL_INIT_PRIORITY_DEFAULT
(default 40) and KERNEL_INIT_PRIORITY_DEVICE (default 50). Thus,
we set PINMUX_INIT_PRIORITY to 45.
There are exceptions to the rule above for particular boards. For
example, BOARD=galileo has GPIO and pinmuxer on I2C bus and thus
overrides PINMUX_INIT_PRIORITY to be much higher. Note that while
PINMUX_INIT_PRIORITY was defined previously (at 60), it was used
only for galileo, which overrides it anyway.
This fix was prompted by investigation why eth_ksdk driver was
non-functional after kernel priorities re-hashing: both eth_ksdk
and pinmux used the same priority, and eth_ksdk happened to run
before pinmux. While bumping eth_ksdk priority would help in the
particular case, the same would likely reoccur with other drivers
like I2C, SPI, etc.
Change-Id: Ie5ca3135c1ee2fe8d9cf48d5c12e62eac63487f7
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Make the blinky application work with this board.
Change-Id: Ibe8d310229e2ff79a2164b7c8f16e7ba3ee0b8c2
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Handle the scenarios like ignoring a response in non existing dlc,
correctly handle if received a command with invalid mtu etc.
Change-Id: Ib0bce9134bac3a0dead03798f859af54873a70c1
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
k_sem_take return differ from nano_sem_take since it return 0 for
successful case instead of 1.
Change-Id: Ia39cd624d56dbc1c8e7f3558244bebf765da191d
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This is no longer needed after switch to unified kernel.
Change-Id: Ie1f8dadb3f2e43ae6ccfbfaf1f754196f3237471
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Those tests are now build with unified kernel.
Change-Id: Idbc42bb77060cea0130d62cccdf2e40aeee89128
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
After switch to unified kernel this is no longer needed.
Change-Id: If9877d3fa038dd873011fb780c7e767e150647ae
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This fixes defect found by coverity: 152027 Pointer to local outside
scope.
Change-Id: I50f196a04363ffa6e6654b71a9a1d89034580413
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The Bluetooth documentation is found in doc/subsystems/bluetooth and
not in doc/bluetooth.
Change-Id: I7e7010b5ae4a26ea552d75f1a095baec18d02630
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Implement the 3 missing HCI commands required to support
Data Length Extensions:
- LE Read Suggested Default Data Length
- LE Write Suggested Default Data Length
- LE Read Maximum Data Length
Note: Only octets are actually used at this time, not time.
Jira: ZEP-1246
Change-Id: Id76d8fedb5ecaf0001c8429cf22f9a3e2c910a44
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fix Coverity, sizeof not portable, defect; by explicitly
using sizeof(void *).
suspicious_sizeof:
Passing argument mem_head of type void ** and argument 4U
/* sizeof (mem_head) */ to function memcpy is suspicious.
In this case, sizeof (void **) is equal to sizeof
(void *), but this is not a portable assumption.
Change-id: I4b4776466e16020876500feba0141985b8581017
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
External interrupts are indexed from value 16, wherein
0 to 15 are ARM cortex M exceptions. Fixed code in
_irq_is_priority_equal to fetch correct external
interrupt line ISR priority.
Change-id: I9cfd411480e78dfc9635e72d14df9d667a9d8400
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Coverity analysis discovered NULL pointer being
dereferenced when passing a auto variable. The variable is
now correctly assigned with address of a valid default
value variable. As per design, the dereferencing will not
happen as the master role does not use the passed parameter
only slave role uses it to prepare the connection parameter
request PDU.
Change-id: I3f8519b23a83cb8c50c7fba81810eff7737ff74a
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Coverity analysis discovered that observer filter policy
field was 1 bit, whereas valid range for extended scanner
filter policy feature implemented in controller is 0 to 3.
Increase the bit field size from 1 to 2.
Change-Id: Id4b2e354961dfb3b45f72fa4e0ab18de7425bbb5
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
This fix using incorrect address type for passive scanning with
privacy enabled. Controller was not reporting directed advertising
to RPA address due to public type being used for passive scan.
This was affecting TC_CONN_GCEP_BV_01_C, TC_CONN_ACEP_BV_01_C and
TC_CONN_DCEP_BV_01_C qualification test cases.
Jira: ZEP-1200
Change-Id: Icc316441fcac1a72d75f9ade27a99030efc846b9
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This might create confusions when debugging as usually the prefix is
associated with the file or layer.
Change-Id: Ibf45578c1f54a4bec896acd6042589c815216e1f
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
BR/EDR code should have minimal impact on LE code so to keep it simple
just require peripheral and central to be enabled when selecting BR/EDR
support.
Fix following Kconfig warning:
warning: (NETWORKING_WITH_BT && BLUETOOTH_BREDR) selects
BLUETOOTH_L2CAP_DYNAMIC_CHANNEL which has unmet direct dependencies
(BLUETOOTH && BLUETOOTH_HCI && BLUETOOTH_HCI_HOST && BLUETOOTH_CONN
&& BLUETOOTH_SMP)
Change-Id: I7f7cb8794def0df6daaa4abfe4596df460f1a2b2
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Fix following warning:
CC subsys/bluetooth/host/monitor.o
In file included from zephyr/include/drivers/loapic.h:58:0,
from zephyr/include/drivers/ioapic.h:22,
from zephyr/include/drivers/sysapic.h:20,
from zephyr/include/arch/x86/irq_controller.h:33,
from zephyr/include/arch/x86/arch.h:28,
from zephyr/include/arch/cpu.h:23,
from zephyr/include/kernel.h:2458,
from zephyr/include/zephyr.h:20,
from zephyr/subsys/bluetooth/host/monitor.c:24:
zephyr/subsys/bluetooth/host/monitor.c: In function
'_deprecation_check_sys_init_bt_monitor_init0':
zephyr/include/device.h:130:16: warning: '_INIT_LEVEL_PRIMARY' is
deprecated [-Wdeprecated-declarations]
static struct device_config _CONCAT(__config_, dev_name) __used \
^
zephyr/include/device.h:245:2: note: in expansion of macro
'DEVICE_AND_API_INIT'
DEVICE_AND_API_INIT(dev_name, drv_name, init_fn, data, cfg_info, \
^
zephyr/include/init.h:69:2: note: in expansion of macro 'DEVICE_INIT'
DEVICE_INIT(_SYS_NAME(init_fn), "", init_fn, NULL, NULL, level, prio)
^
zephyr/subsys/bluetooth/host/monitor.c:193:1: note: in expansion of
macro 'SYS_INIT'
SYS_INIT(bt_monitor_init, PRIMARY, MONITOR_INIT_PRIORITY);
^
zephyr/include/device.h:48:31: note: declared here
static __deprecated const int _INIT_LEVEL_PRIMARY = 1;
Change-Id: Ie903e3a075f6614b26018be5769be3651f0963be
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Added implementation for HCI Reset Command. Implementation
gracefully disables any running advertiser, observer, and/
or connection roles, and it resets controller context members.
The HCI Reset Command is implemented in such a way that
driver instances shared with other sub-systems and
application is not disturbed and instance/references used
by Bluetooth Controller are gracefully returned back.
Jira: ZEP-1282
Change-id: Ifb9ae6807736b5ec2d9f346cf2a590322056bcee
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This fixes issue that L2CAP Connection Parameters Update Request was
not sent. There was check that used LE features of host controller
to determine if L2CAP procedure or LL shall be used. It was failing
with 4.2 controller. The check shall test if remote supports
LL Connection Parameters Request Procedure. If it's not supported,
then L2CAP Connection Parameters Update Procedure will be used.
Closes ZEP-1220
1/4 L2CAP TC_LE_CPU_BV_01_C PASS
2/4 GAP TC_CONN_CPUP_BV_01_C PASS
3/4 GAP TC_CONN_CPUP_BV_02_C PASS
4/4 GAP TC_CONN_CPUP_BV_03_C PASS
Change-Id: I61ad544d9568ca6306a845e05c1a2e28d1693ab4
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Using the K_* macros makes it easier to read what exactly the various
timeouts are.
Change-Id: Ia405d3760b8e600af7e33a7221ef6ec717708973
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Also fixes up Kernel Primer examples to use these macros.
Change-Id: Ib1bc9e3f85ab75f81986bc3930fb287266a886b5
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Rewrites the example of a timer's expiry routine offloading
processing that can't be done at interrupt level. The example
now submits work to the system workqueue directly, rather than
using an alert. This saves footprint by eliminating the need
for alert-related API support that isn't needed. (This is a
true savings, since the alert code just called the same
workqueue APIs the example now calls directly.)
Change-Id: I378e40aef33014f2c75c4f57531f75247d50e479
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
