Pending variable needs to be init so that we do not use
some old value when cache entry is reused.
Change-Id: Id6af61981d4fc7628992b4a018d84a4e5c8a16f6
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The IP address was not printed properly when registering a handler.
Change-Id: Iadb02997a43f1440932d224e0113b6f45c4f0aed
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No need to partition the data if MTU is large enough and
data can be sent in one frame.
Change-Id: I8ba0f5030ed1e2c1341c7e2dd409ba636b1a9a4c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When allocating net_buf via a net_context, set the network
interface and protocol family to net_nbuf.
Change-Id: I0df876e0c8ba66bac42f3aa7fd17c5bf9a935985
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The sending functions net_context_send() and net_context_sendto()
will need to send data.
Change-Id: I5372cb9dede2a996276c30241f28689c4f902dff
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This API provides similar kind of functionality as BSD socket
API. This API does not provide BSD socket API.
Change-Id: I537d0ad2a5213f1d1e11fa7891dd4f4d0f3cc4bb
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The earlier default 1 was too low, a more usable 2 is now
the default. User can set the limit to 1 if needed.
Change-Id: Ib30a1ceb95c42f69197298f672daaeab6b41890b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When a UDP packet has been received and if a watcher match
is found, then a callback is called. It is useful to have
a pointer to net_conn when calling the callback.
Change-Id: Ifa97b37c22b1fc9cac7eadfba23aa68dfd473fda
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the net_conn needs port information, use struct sockaddr
internally as it has the port numbers built in.
Change-Id: Idb1c87afa956dfe55dc8d533d867fa7845545b12
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
These are need in future commits. The sockaddr struct will hold
the IP address and port number among other things.
Change-Id: I0971c39f0f1cb019aa8610977a245e24548c56ee
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As we send the same network buffers back to sender, then
we need to also swap link layer addresses otherwise the packets
will be discarded by the sender.
Change-Id: I08b083d567bf5f45fd25d8a30fefa5330e12c35e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Creating a dummy macro that is used when debugging is disabled.
Change-Id: I8171463451ef428f1f06fa845d7af6b78c7c5910
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Changing the IP address type to const as the functions do not
modify the IP address.
Change-Id: I176d84af5f05843226a954f91b6bb3bba6596863
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Network interface multicast address was missing information
about the protocol family.
Change-Id: I8d7b0514ec351efddb6997965c940f62fc08a37a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No need to print debug prints if debugging is not activated.
Change-Id: I42a6453b4f3e11106119561b580ebea41e56452d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Using network interface index instead of net_if pointer can
save 3 bytes of memory. So these utilities help to convert
pointer to index and vice versa.
Change-Id: I8743a06e0935d48798b19526154058be385550af
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When checking the IP address from network interface, return
also the used network interface.
Change-Id: If7b8385193da4cb1b469f697e219cfae3b6477dd
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We do not need any header files from legacy IP stack.
Change-Id: I0c78fe500bec37593e66e8a237a3f92b79cbaf85
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
IPv4/6 functions follows this scheme: net_if_ipv<4/6>_<name>.
Applying that to net_if_set_gw/net_if_set_netmask which are IPv4
functions.
Change-Id: I2dcbb16ce81cfdffbfbb5cae24ad76ddf2b9919a
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Reducing the amount of #if defined(CONFIG_NET_IPV<4/6>) for a clearer
code and to lower compiler's stress.
Change-Id: Iffbfbda4409c6cbf48a3057ea1b9e43309cd84e7
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
IPv6 packets with UDP header are compressed and decompressed
as per RFC 6282 (IPHC). Context based compression not implemented.
Change-Id: I8020da26b8d40fdc80e75cba56ef28a01a36159e
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Utility verifies given address is based on link layer address
or not.
Change-Id: I2b89e498fa2481051ec9a47ada8b4a5e8e38ad7a
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If the link layer address is short address, create interface ID based on
short address.
Change-Id: I49e150cc20a0bf973880d27f418762f68f2d9139
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
While reusing buffers and passing those parameters might have
already some garbage. So just clear first and create iid.
Change-Id: I5774de157e0c39e7e7b1313a598557c58a4c63b0
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Using macros does not let the compiler verifying about the type we are
providing, which usually give an error easier to understand.
Also, this will let the compiler deciding how to actually optimize
(inline or not) the code.
Change-Id: Iba49590b620ef0a1bd0ed5621453524fcfea747c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This make sure we will found all relevant headers in the right location.
Change-Id: I37fe978ed2af09d921c48df6986a8df9041ddc3f
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
NET_BUF might be used alone. Also Bluetooth does not necessarily needs
an IP stack to run. Changing titles names for better understanding.
Change-Id: Iabfd7bf0689e79d27cc7897856a528f0dc5740f7
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
net_context.h is missing and one variable had a wrong name.
Change-Id: I4aac2f5c12cea39553fb86d1bd497c88f0ef1963
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Without these, test case will fail miserably.
Change-Id: Ib46d167b8782c33362ac6edb9d8c50abc25908c0
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Debug function that will print individual fragments and their sizes.
Change-Id: I84ce144230fb099bb44ed383075564ebf377998f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Disable IPv6 DAD and ND for IP address test as there is
no need to do neighbor discovery in the test. We also
would like to see network interface debugging and use
dummy L2 driver instead of ethernet one.
Change-Id: Ia9f218c8d4c13afa1482302691d2ef72af4a7b13
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The driver_api pointer was set to NULL and send() pointer
was missing which caused a crash in TX fiber.
Change-Id: I7204c975691476dd9ab2c61bfd11b7664343e47c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The earlier Kconfig entries for IPv6 DAD and ND were confusing.
This commit will clarify this so DAD is activated by
CONFIG_NET_IPV6_DAD and ND is activated by CONFIG_NET_IPV6_ND.
These are settings are enabled by default.
Change-Id: If6245e3425489bc454a0d75113770c4f797a4017
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
ARP is IPv4 only so no need to have IPv6 functionality.
Change-Id: Ie70242f5763ba4945c311898643414851f7e8660
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
These tests will verify that we can successfully insert
some space in front of the net_buf fragment chain.
Change-Id: Idf52ed56c52d66268783fb4fecd44b70fc852734
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Provide an utility function that pushes data down in the fragment
chain which means that there would be some free space before the
first fragment.
Change-Id: I491ac4e8cbf633f86f2351cad48d683e829bda63
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Provide a function that checks if there is any free space
in the individual fragment and remove such slack. If there
are fragments that would become empty, then those fragments
are removed from the fragment list and freed to the fragment
pool.
Change-Id: Ieb1c953a1458622c4552c23ef38e330873cd27c3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
