This header contains encoding offsets for all the eSPI channels which
communicate data from/to the host.
Signed-off-by: Francisco Munoz <francisco.munoz.ruiz@intel.com>
Initial implementation of the keyboard controller peripheral
in the eSPI driver. This allows to communicate ps2 and kscan
data between EC and Host
Signed-off-by: Francisco Munoz <francisco.munoz.ruiz@intel.com>
eSPI is an aggregator device which is used by other blocks
to communicate with the master. This new APIs allows LPC
peripherals to communicate with eSPI master.
Signed-off-by: Francisco Munoz <francisco.munoz.ruiz@intel.com>
The discard report is now generated for every run as
sanity-out/sanitycheck_discard.csv, the option --discard-report was
dropped.
Fixes#20804
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
According to API documentation, the bcdDevice field of the USB
descriptor is supposed to represents the Zephyr kernel major
and minor versions as a binary coded decimal value. However,
when using zephyr 2.0, bcdDevice is shown as 0.00 instead of 2.00.
This is due to a typo in the implementation of the BCD macro in
usb_commond.h. This commit fixes the macro.
Signed-off-by: Arnaud Taffanel <arnaud@bitcraze.io>
When building with support for BLE stack on the nRF5340 APP CPU
(Application MCU), use RPMsg HCI driver by default.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
When building with support for BLE stack, enable the BT_ECC
for the nRF5340 NET CPU (Network MCU).
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
When building with support for BLE stack, enable the Vendor Specific
commands for the nRF5340 APP CPU (Application MCU).
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
The HCI transport implemented by an application using the HCI raw
interface may have its own buffer headroom requirements. Currently the
available headroom gets completely determined by the selected HCI
driver. E.g. most of the time this is the native controller driver
which doesn't reserve any headroom at all.
To cover for the needs of HCI raw users, add a new Kconfig variable
for the apps to set to whatever they need. Correspondingly, use the
maximum of the HCI driver and HCI raw headroom requirements for the
buffer pool definitions and the headroom initializations.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The interprocessor communication can be based on shared memory.
Allow to declare this memory as with a generic name derived from
chosen declaration.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
When pass NULL to spi_transceive with user space enabled, stack buffer
is still passed to spi driver and it will cause kinds of problems like
MPU fault, so change it to pass relevant NULL pointers in the actual
transceive call.
Fixes: #20811.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Clarified that clock_control_off and clock_control_async_on can be
called from any context since they are non-blocking.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Description of clock_control_async_on contained information about
delayed start which is not supported by this function call.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This test is failing on platforms requiring a bigger stack size. This
issue is fixed by adding the missing CONFIG_TEST_EXTRA_STACKSIZE to
tweak the thread stack size.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Fix scanning so that we always use active scanning in case the UUID we
are looking for is in the scan response, and disable duplicate filtering
to handle devices that modify their advertising data at runtime, such as
smartphones reacting to apps being opened and closed.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Update the sample to indicate which device it was using, which helps
mitigate the existing problems identifyin Arduino I2C buses. Also
output a summary of results so cases where no devices are found
provide output after the Starting... line.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
As implemented this test runs for 20 s with no output, which makes it
difficult to identify the cause of failure. Add output indicating
progress, and emit diagnostics a particular failure observed on iMX
boards.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
/lib/libc/ was listed twice in the file
The first entry was overriden by the 2nd
And so was the case for
/samples/bluetooth/
In this second case, the override lost a user, so add it
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Enable SWO debug output during system initialization and not as part of
GPIO driver initialization. After the modification the logger output
becomes available earlier during the boot process. Also, it's not
necessary anymore to build full GPIO driver only to enable SWO. This may
be critical when building small images.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
The init macro used outdated spellings for the instance-specific
properties, resulting in build warnings when I2C was enabled.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Provide the mapping from FE310-G002 GPIO pins to the Arduino Uno
headers. Note where pins have pre-assigned functions that may
interfere with use as GPIOs with the default pinmux assignments.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Fix the implementation of slow encryption setup design
alternative to send ENC_RSP PDU before sending REJECT_IND
or REJECT_EXT_IND PDU.
Fixes#19917.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Adds missing items to the list of supported features for all nxp imx rt
boards. These features were already supported, just missing from the
list.
This change increases the number of samples and tests that sanitycheck
selects for these boards.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Sorts the list of supported features in alphabetical order for all nxp
boards. No features are added or removed.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Link to Nordic Semiconductor Infocenter, instead of DocLib
in the documentation for nRF-based Development Kits.
Change Nordic Semi to Nordic Semiconductor in the
DK figure captions.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Fix dependency on the Host to include the PHY update procedure and the
data length update procedure. In a host-only build this feature should
be possible to select without relying on the supported features of the
controller. The host will check support using HCI command to read
attached controller features and commands supported.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Some people are behind firewalls that prevent them
from doing ssh connections.
Change the default BabbleSim fetching instructions to
be over https which should work for everybody.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
It is important to clarify when to launch audio capture command in
order to avoid that initial boot characters enter into the audio
file leading to bad initial data.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
After SanityCheck I found out, that test arch.interrupt
still has same duplicate names.
To get rid of it, I decided to change the duplicate test case name in
arch/arm/arm_interrupt to arch.interrupt.arm since that is not
a generic interrupt test but is ARM-specific.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
A partition start offsets should be expressed relative to the flash
device base address. For cpunet flash partitions start offsets
were improperly expressed as absolute flash address.
This patch fixes partitions start addresses for nRF5340 cpunet.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Removed some cut/paste from mynewt with references to os_callout,
os_event in example snippets.
code examples were also aligned to current settings handle API.
fixes#20743
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
We should be adding a compiler barrier for IP register
when we are doing syscall generation on Cortex-M
architecture. The syscall generation itself only
does an SVC trigger; the execution returns to thread
mode and ARM does not guarantee that IP register is
preserved, when we finally get back to the point where
the syscall was invoked. This may be a problem, when
the compiler inlines the arch_syscall_invoke function,
so the IP register may be in use.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Fix the following warning from gcc-9.2:
arm/syscall.h:52:2: error: listing the stack pointer register 'sp'
in a clobber list is deprecated [-Werror=deprecated]
52 | __asm__ volatile("svc %[svid]\n"
| ^~~~~~~
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
