olimexino_stm32 board doesn't have a
debugger. Now that stm32flash
runner is available, let's use it.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
The functionality of samples/drivers/gpio sample application duplicates
already existing code in samples/basic/blinky and samples/basic/button.
This commit removes the gpio sample application.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
The DMA driver of stm32 used to use `stm32_dma_enable_fifo()`,
which is located in dma_stm32_v1.c to set DMDIS bit, enable
interrupt generation and set FIFO threshold. Now since FIFO
threshold is initialized with `stm32_dma_get_fifo_threshold()`
and interrupt generation is also configured in dma_stm32.c, this
function will only have one job, to configure FIFO mode.
We can add FIFO mode operation in dma_stm32.c directly and
remove it from dma_stm32_v1.c.
Signed-off-by: Song Qiang <songqiang1304521@gmail.com>
timer_api requires TEST_USERSPACE activation which is missing
in tickless configuration of the test.
Enable flag in prj_tickless.cnf
Fixes#20904
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
When using the EWIF it is a good idea to clear it before enabling the
watchdog. Otherwise, the watchdog callback will be called upon watchdog
enable if EWIF is enabled. This patch fixes this case.
Signed-off-by: Ioannis Konstantelias <ikonstadel@gmail.com>
We were parsing random FAIL messages from the output of test runs ad
testcases and capturing them in the xml output. Now we only parse the
name if it starts with test_.
Fixes#21162
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
SOC_FAMILY_ARM has no prompt. Assignments in configuration files have no
effect on symbols without prompts. A prompt means the symbol is
user-configurable.
SOC_FAMILY_ARM is instead enabled indirectly through being selected by
other symbols.
Detected through some work-in-progress improved error checking.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Commit ceffca2c42 added DTS support for board LEDs and buttons. Remove
redundant LED0_GPIO_PORT, SW0_GPIO_NAME, etc. defines.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
The -Og (optimise for debugging) flag is only available for GCC 4.8.0
and above, and specifying it for a GCC version lower than 4.8.0 will
result in a compilation error.
This commit adds a check for compiler -Og optimisation flag support and
a fallback to -O0 (disable optimisation) when -Og flag is unsupported.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Expose the bt_uuid_to_str function as an API to the application.
This aligns this function with the bt_addr_to_str function call. This
allows the application to use this function without having to enable
the BT_DEBUG option.
Move the in-place bt_uuid_str to internal logging, this is mainly done
due to the limitation in the log_strdup that shouldn't be exposed to the
application.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Also replace some
config
prompt "foo"
bool/int
with the more common shorthand
config
bool/int "foo"
See the 'Style recommendations and shorthands' section in
https://docs.zephyrproject.org/latest/guides/kconfig/index.html.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Removes redundant and invalid configurations from the bluetooth/mesh
sample. Removes some stale disabled config entries.
Fixes L2CAP related warning in config step of sample.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Switch to using the synchronous bt_init call before starting the main
loop in the peripheral samples. This is to avoid sending notifications
before bluetooth has been properly initialized.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Check that the bluetooth device has in fact been initialized before
continuing with public API calls. This could lead to crashes when using
state that has not yet been initialized.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The following samples:
- boards/nrf91/nrfx
- boards/nrf52/power_mgr
are actually not specific to nRF91 and nRF52 Series SoCs, respectively,
hence the current naming of the above board/ subdirectories may be
misleading. Thus, use nrf/ directory for holding all nRF board specific
samples that apply to several boards.
Paths to the moved samples that are mentioned in their documentation
are also updated accordingly.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
gen_syscall_header.py is not longer necessary, it was just creating a
file including syscall.h. This header is now included directly by
gen_syscalls.py.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
After switching to nrfx 2.0.0, the Kconfig choice options that allowed
enabling of pull-up or pull-down for MISO lines in SPIs and SPIMs are
not properly supported, they are simply ignored. This commit restores
the possibility of applying pull configuration for MISO lines.
In earlier nrfx versions, the MISO pull configuration could be only
set globally, in nrfx_config files, for all SPI and SPIM instances
together. Since nrfx 2.0.0, this configuration can be applied per
instance. This commit takes advantage of this possibility and instead
of using a common Kconfig option as a global setting for all instances,
allows applying individual instance settings via devicetree.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Previously, if a control transfer had data, it would be unhandled and
left in the usbip socket to be interpreted as the next usbip packet,
leading to explosions.
Signed-off-by: Josh Gao <josh@jmgao.dev>
This is a follow-up to commit 84f8235005.
Default initialization to 0 of the .dcx_pin field in the extended part
of the SPIM configuration is incorrect, because this means that pin 0
should be used as the D/CX line. For the SPIM instance that provides
the extended functionality, this results in undesired assignment of
the pin 0, and for the other SPIM instances, this causes that their
initialization fails with the NRFX_ERROR_NOT_SUPPORTED code.
This commit sets this field to NRFX_SPIM_PIN_NOT_USED, to indicate that
the D/CX line is not supposed to be used.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
When set, the BT_GATT_SUBSCRIBE_FLAG_NO_RESUB flag indicates that the
subscription should not be renewed when reconnecting with the server.
This is useful if the application layer knows that the GATT server
persists subscription information.
Signed-off-by: François Delawarde <fnde@oticon.com>
Added configuration for accepting pairing requests only if both devices
has bonding flag set in order to reject other devices at an early stage,
thus leaving more chance for devices expected to bond.
With the CONFIG_BT_BONDING_REQUIRED flag the device only accept pairing
requests if it has CONFIG_BT_BONMDABLE set and the device requesting
pairing has Bonding_Flags field set to Bonding (0x01) in its AuthReq.
Note: When using bt_set_bondable(false) pairing requests will be
rejected when CONFIG_BT_BONDING_REQUIRED is set.
Signed-off-by: Martin Rieva <mrrv@demant.com>
By default all events are processed through bt_recv, which results
in lost events and subsys/bluetooth/hci_core.c:hci_event function
assertions fail to pass
Signed-off-by: ZhongYao Luo <LuoZhongYao@gmail.com>
According to the context information, the processing of
net_buf_add_u8 within the get_evt_buf function is
redundant and incorrect.
Signed-off-by: ZhongYao Luo <LuoZhongYao@gmail.com>
flash_sector_from_off fetched sector data of page
in relation to the flash memory beginning instead of the flash
area beginning.
Issue was invisible as on most devices all sectors looks similar.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Fix issues that surfaced when trying out GCC 9.2, official release name
gcc-arm-none-eabi-9-2019-q4-major, both related to invalid pointers in
GATT when declaring UUIDs in if-scope.
1. Fix the discovery callback giving an invalid pointer in the discovery
callback in two instances.
2. Fix gatt_find_type sending invalid data during discovery procedure.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Send connection parameter update request only if it contains the valid
range of values for connection intervals, latency and timeout.
Signed-off-by: Kiran Paramaswaran <kipm@oticon.com>
The type of SOC_ATMEL_SAME70_DISABLE_ERASE_PIN is bool, yet its default
is specified as an int value of 0.
This commit removes the implied `default 0`, which is equivalent to
`default n`.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Add dts configs for bt-c2h-uart and bt-mon-uart. These are used by
the hci_uart sample and BT_DEBUG_MONITOR.
Signed-off-by: Rubin Gerritsen <Rubin.Gerritsen@nordicsemi.no>
In order to avoid a warning from Sphinx complaining that the
supported_features.rst file is not included in any ToC, rename it to
.txt so that Sphinx understands that this is only a snippet to be
included in other files.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Using ':' as the separator in --modules breaks module specifications
like
nrfxlib:nrfxlib:C:/Users/Carles/src/ncs/nrfxlib
The ':' in 'C:' gets seen as a separator.
Use ',' instead, which is unlikely to appear in paths (at least in
--modules). Treat a doubled ',,' as a literal ','.
Another option would be ';', but it clashes with how CMake represents
lists, which is awkward.
Also make quoting of arguments with spaces more robust by passing
VERBATIM to add_custom_target().
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Fills in all missing API documentation for the public Bluetooth Mesh
API, and unifies the formatting of all entries.
Some defines and enum values have been left without documentation in
cases where the meaning is self explanatory, and documentation wouldn't
add any value. Structure members that are just internal parameters are
left without documentation, as this also hides them from the generated
documentation output.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Fix misspellings in docs (and Kconfig and headers processed into docs)
missed during regular reviews.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Fix ATT MTU size of length variables resulting in wrong length values
reported to the user. Communicating with an Android device using an MTU
of 517 resulted in write commands reported as length 2 instead.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Commit 5a9a33b0cf changes interrupt
destination in an attempt to broadcast interrupts. However, this
change causes interrupts to stop working on the UP Squared board
in non-SMP configuration. According to QEMU source code,
physical destination address 0xFF000000 is a special case where
it broadcasts the interrupts. However, none of the IOAPIC
documentation (that I can find) describes this behavior. So,
revert that commit.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Deep sleep states are documented to include SoC-level power gating,
i.e. the SoC loses context. In practice entering a deep sleep state
requires an external wakeup mechanism that may need to restart the
application.
Such states are too dangerous to enter automatically based on an
expected duration of sleep, especially since a "forever" sleep that
would normally be woken as a result of a peripheral event would select
the deepest sleep state available. Limit the sleep levels selected by
a residency policy to ones in which the CPU may be stopped, but will
not lose execution context.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
