This saves time and avoids the need to pass additional state around in
the environment to recreate the edt exactly.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This helper allows setting default Kconfig values based on devicetree
node properties without giving the full path to the node.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This helper allows setting default Kconfig values based on devicetree
node properties without giving the full path to the node.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Use the compat2enabled and label2node maps in the global edt object to
speed up some functions.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Pass EXTRA_DTC_FLAGS to kconfig so the EDT object we have in
kconfigfunctions can use that to set warn_reg_unit_address_mismatch
properly.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This can be used from Kconfig to detect if any enabled nodes of a
compatible are on a bus. This can be useful if a compatible might
appear on multiple buses, to enable them by default from application
code without having to change prj.conf settings depending on what's in
the devicetree.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The last user of the .conf file format DTS data has been removed. We
can now remove the generation and associated support for the .conf file.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
dt_int_val, dt_hex_val, and dt_str_val have been deprecated for two
releases and thus are meant to be removed.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add kconfigfunctions that given the property name to an integer type
property will return its value as either an string int or string hex
value.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This function takes a 'label' and returns "y" if an "enabled" node with
such label can be found in the EDT and that node is compatible with the
provided 'compat', otherwise it returns "n".
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
If the #address-cells property for a register is 0 than we set the addr
value of the reg to None. Similar, if #size-cells is 0 than we set the
size value to None for the reg.
Fixup kconfigfunctions.py to handle reg.size and reg.addr being None.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a function takes a 'label' and returns "y" if we find an
"enabled" node that has a 'nodelabel' of 'label' in the EDT
otherwise we return "n"
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
generated_dts_board.h is pretty redundant and confusing as a name. Call
it devicetree.h instead.
dts.h would be another option, but DTS stands for "devicetree source"
and is the source code format, so it's a bit confusing too.
The replacement was done by grepping for 'generated_dts_board' and
'GENERATED_DTS_BOARD'.
Two build diagram and input-output SVG files were updated as well, along
with misc. documentation.
hal_ti, mcuboot, and ci-tools updates are included too, in the west.yml
update.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
dt_chosen_reg() and dt_node_reg() take between 1 and 3 arguments, not
between 1 and 4 arguments. The implicit name argument isn't included in
the count.
These functions implement $(dt_chosen_reg_*) and $(dt_node_reg_*).
Giving the right max argument count makes Kconfiglib generate error
messages that give the location of the call, instead of getting a
cryptic generic Python error.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add shields_list_contains Kconfig function which return bool based on
check of shield presence in cmake SHIELD_AS_LIST.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add function that will return 'y' or 'n' if a node pointed to by a
chosen property exists and is enabled.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace:
dt_chosen_reg_addr
dt_chosen_reg_size
dt_node_reg_addr
dt_node_reg_size
with:
dt_chosen_reg_addr_int
dt_chosen_reg_size_int
dt_chosen_reg_addr_hex
dt_chosen_reg_size_hex
dt_node_reg_addr_int
dt_node_reg_size_int
dt_node_reg_addr_hex
dt_node_reg_size_hex
So that we get the proper formatted string for the type of symbol.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fix a bug where DTS_BINDINGS_DIRS could only have one entry. When
there were more than one entry the command for invoking menuconfig
became corrupted.
This changes the separator of DTS_BINDINGS_DIR from a space to ? so
that the shell does not interpret the space as an argument separator.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
edtlib.Device is just a devicetree node augmented with binding
information and some interpretation of properties. Rename it to
edtlib.Node to make that clearer. That also avoids calling things like
flash partition nodes "devices", which is a bit confusing.
I called it edtlib.Device instead of edtlib.Node originally to avoid
confusion with dtlib.Node, but in retrospect it probably makes it more
confusing on the whole. Something like edtlib.ENode might work too, but
it's probably overkill. Clients of edtlib.py only interact with
edtlib.Node, so the only potential for confusion is within edtlib.py
itself, and it doesn't get too bad there either.
Piggyback some documentation nits, and consistently write it
"devicetree" instead of "device tree", to match the spec.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Some confluence of recent changes resulted in builds with
application-specific bindings being unable to find bindings present in
the system directory. Add quotes and splits as necessary to propagate
multiple directories through the system.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
As we work on removing the .conf file that is generated by the dt
scripts, mark dt_{int,hex,str}_val functions as deprecated.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Splitting a string like 'foo="bar=baz"' on '=' will give ['foo', '"bar',
'baz"'] instead of the intended ['foo', '"bar=baz"']. split() with
maxsplit=1 to avoid potential issues.
Not seen in practice. Just some future safety.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Not needed in Python. Detected by check C0325 in pylint3.
Also replace an
if len(tag):
with just
if tag:
Empty strings, byte strings, lists, etc., are falsy in Python.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Do not load the GENERATED_DTS_BOARD_CONF if in doc mode, since it will
not defined as it doesn't apply. No need to defined it to a dummy value.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Make kconfigfunctions.py agnostic to where GENERATED_DTS_BOARD_CONF is
located.
We don't want to encode the path of GENERATED_DTS_BOARD_CONF into more
places than necessary. Also, re-using GENERATED_DTS_BOARD_CONF makes
it easier to change where generated_dts_board.conf is located.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
kconfigfunctions.py will silently set all values to '0' when the
environment variable 'PROJECT_BINARY_DIR' is not set.
But PROJECT_BINARY_DIR not being set indicates an internal error, so
we should instead error out with an appropriate error message.
Silently failing is dangerous and increases debug time. It is better
to fail fast.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Documentation for kconfigfunctions, mentions they look up elements
in "the DTS generated "conf" style database". This indication
could be cryptic for new zephyr users. Adding the exact name and
path of the file for disambiguation.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Clarify the docs for dt_str_val that if the name isn't found we return
and empty string. Also cleanup the code slightly as we don't need to
escape the double quote.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Export a new KCONFIG_DOC_MODE environment variable when building the doc
and invoking Kconfig, so that the functions that expect a build folder
can accordingly return a hardcoded value.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
As a step to completing removing use of Kconfig defines in dts files we
need to change how we configure/set CONFIG_FLASH_LOAD_{OFFSET,SIZE}.
Previously we would set them based on how the chosen property
'zephyr,code-partition' was set to. If 'zephyr,code-partition' wasn't
set we would default the values to 0. We had some generic overlay logic
which would define 'zephyr,code-partition' based on
CONFIG_BOOTLOADER_MCUBOOT.
Going forward if the DTS has 'zephyr,code-partition' set we will
generate DT_CODE_PARTITION_OFFSET & DT_CODE_PARTITION_SIZE defines. We
will leave it to Kconfig to set CONFIG_FLASH_LOAD_OFFSET &
CONFIG_FLASH_LOAD_SIZE.
We introduce a python script that allows Kconfig to extract data from
the DTS and thus we can utilize DT_CODE_PARTITION_OFFSET and
DT_CODE_PARTITION_SIZE values to set defaults for
CONFIG_FLASH_LOAD_OFFSET & CONFIG_FLASH_LOAD_SIZE.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>