The current CoAP implementation not perform any checks including
duplicated packets. This add block sequency verification and a
timer to ensures that slow networks works apropriately.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
The current implementation uses a fixed value for max retries. That
value could be good for an wired network like Ethernet. However,
wireless network can suffer with higher packet collision, low reception
signal etc. This refacts the variable to be defined at Kconfig. This
way max retries can be adjust conform the current media.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
The hints variable is used without a defined state. This fill the struct
with zeros to set variable at a well known state.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Current log only prints default log level. Add LOG_LEVEL at updatehub
to switch between log variations based on CONFIG_UPDATEHUB_LOG_LEVEL.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Fix variable-size string copy patch that introduced a runtime bug that
causes a bus fault.
Fixes#24853.
Signed-off-by: Tahir Akram <mtahirbutt@hotmail.com>
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
The conversion from DT_FLASH_AREA to FLASH_AREA macros don't add the
storage flash_map.h include file.
Fixes: #25332
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Convert with a combo of scripts and by hand fixups:
git grep -l DT_FLASH_AREA_.*_ID | \
xargs sed -i -r 's/DT_FLASH_AREA_(.*)_ID/FLASH_AREA_ID(\L\1)/'
git grep -l DT_FLASH_AREA_.*_OFFSET | \
xargs sed -i -r 's/DT_FLASH_AREA_(.*)_OFFSET/FLASH_AREA_OFFSET(\L\1)/'
git grep -l DT_FLASH_AREA_.*_SIZE | \
xargs sed -i -r 's/DT_FLASH_AREA_(.*)_SIZE/FLASH_AREA_SIZE(\L\1)/'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Update to new timeout api. Without this change UpdateHub don't build
anymore.
Fixes: #25230
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
DTLS without peer verification offers no security whatsoever (and is
arguably worse than not using DTLS in the first place).
Change the verification option to require this peer verification. To
use this, it may be necessary to install and use a root certificate.
Signed-off-by: David Brown <david.brown@linaro.org>
Improve buffer overflow security on probe_cb. This ensures that socket
buffer have fixed lenght and content received by COAP fills properly on
metadata buffer. After that, ensures that metadata content is a valid
string with length lower than metadata size.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
A malformed JSON payload that is received from an UpdateHub server
may trigger memory corruption in the Zephyr OS. This could result
in a denial of service in the best case, or code execution in the
worst case.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
After a success image download, UpdateHub needs inform MCUboot that
must test new image and then, on success, commit this new image. This
add missing upgrade request call step and fixes the upgarde flow.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
The current version aborts update when found last transfer block. Now,
system checks only at end of coap block transfer total size and install
if download is ok.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
The MAX_PAYLOAD_SIZE must reflect the size of COAP_BLOCK_x. This is
necessary becase BLOCK size represents max payload size. The current
value create inconsistencies for coap lib. The same way,
MAX_DOWNLOAD_DATA must allocate sufficient space for MAX_PAYLOAD_SIZE
plus all space for coap header etc.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
`TLS_PEER_VERIFY` and `TLS_DTLS_ROLE` options accept specific values,
yet no symbols were defined for them. In result, magic numbers were used
in several places, making the code less readable.
Fix this issue, by adding the missing symbols to the `socket.h` header,
and using them in places where related socket options are set.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Not a top-level zephyr core API and tied to third party environment, so
move it to where the code is in lib/updatehub.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/reboot.h to power/reboot.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move flash.h to drivers/flash.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move json.h to data/json.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This extends the UpdateHub library code to allow the
use of IPV6 for communication.
Signed-off-by: Christian Tavares <christian.tavares@ossystems.com.br>
This extends the UpdateHub library code to allow the
use of CoAPS/DTLS for communication.
Refs: #13039.
Signed-off-by: Christian Tavares <christian.tavares@ossystems.com.br>
UpdateHub is an enterprise-grade solution which makes simple to
remotely update all your embedded devices in the field. It
handles all aspects related to sending Firmware Over-the-Air(FOTA)
updates with maximum security and efficiency, while you focus in
adding value to your product.
Signed-off-by: Christian Tavares <christian.tavares@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>