1) Dump time sinse last scheduler call
Could be handy for tickless kernel debug.
Will indicate that no rtc irq is called
2) Dump current timeout of each thread
Could be used to find yout when thread will wake up
3) Dump human friendly thread state
4) Use shell_prin instead shell_fprintf
Signed-off-by: Pavlo Hamov <pavlo_hamov@jabil.com>
Populate thread->stack_obj earlier in the thread initialization
process such that it is set when z_new_thread() is called.
There was nothing specific about its position, or the rest of
the code in that CONFIG_USERSPACE block, so just move it all up..
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
* z_NanoFatalErrorHandler() is now moved to common kernel code
and renamed z_fatal_error(). Arches dump arch-specific info
before calling.
* z_SysFatalErrorHandler() is now moved to common kernel code
and renamed k_sys_fatal_error_handler(). It is now much simpler;
the default policy is simply to lock interrupts and halt the system.
If an implementation of this function returns, then the currently
running thread is aborted.
* New arch-specific APIs introduced:
- z_arch_system_halt() simply powers off or halts the system.
* We now have a standard set of fatal exception reason codes,
namespaced under K_ERR_*
* CONFIG_SIMPLE_FATAL_ERROR_HANDLER deleted
* LOG_PANIC() calls moved to k_sys_fatal_error_handler()
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The implementation of z_impl_float_disable was missplaced
inside the #ifdef SPIN_VALIDATE. Fixing it.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This mechanism had multiple problems:
- Missing parameter documentation strings.
- Multiple calls to k_thread_name_set() from user
mode would leak memory, since the copied string was never
freed
- k_thread_name_get() returns memory to user mode
with no guarantees on whether user mode can actually
read it; in the case where the string was in thread
resource pool memory (which happens when k_thread_name_set()
is called from user mode) it would never be readable.
- There was no test case coverage for these functions
from user mode.
To properly fix this, thread objects now have a buffer region
reserved specifically for the thread name. Setting the thread
name copies the string into the buffer. Getting the thread name
with k_thread_name_get() still returns a pointer, but the
system call has been removed. A new API k_thread_name_copy()
is introduced to copy the thread name into a destination buffer,
and a system call has been provided for that instead.
We now have full test case coverge for these APIs in both user
and supervisor mode.
Some of the code has been cleaned up to place system call
handler functions in proximity with their implementations.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/math_extras.h to sys/math_extras.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move atomic.h to sys/atomic.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move tracing.h to debug/tracing.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move internal and architecture specific headers from include/drivers to
subfolder for timer:
include/drivers/timer
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We introduce k_float_disable() system call, to allow threads to
disable floating point context preservation. The system call is
to be used in FP Sharing Registers mode (CONFIG_FP_SHARING=y).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Given that the section name and boundary simbols can be inferred from
the struct object name, it makes sense to create an iterator that
abstracts away the access details and reduce the possibility for
mistakes.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This stores a combination of a pointer and a CPU number in the low
2 bits. On 64-bit systems, the pointer part won't fit in an int.
Let's use uintptr_t for this purpose.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
- Delete CONFIG_TEST_USERSPACE=n no-ops because it's the default
since commit 7b1ee5cf13
- Some tests have a "userspace" tag pretending to TEST_USERSPACE but
don't and vice versa: fix missing or spurious "userspace" tags in
testcase.yaml files.
Tests have a _spurious_ "userspace" tag when they PASS this command
cause none should pass:
./scripts/sanitycheck --tag=userspace -p qemu_x86 \
--extra-args=CONFIG_TEST_USERSPACE=n \
--extra-args=CONFIG_USERSPACE=n | tee userspace.log
All tests run by this command must either fail to build or fail to run
with some userspace related error. Shortcut to look at all test
failures:
zephyr_failure_logs() {
awk '/see.*log/ {print $2}' "$@"
}
Tests _missing_ "userspace" tag FAIL to either build or to run with some
userspace related error when running this:
./scripts/sanitycheck --exclude=userspace -p qemu_x86 \
--extra-args=CONFIG_TEST_USERSPACE=n \
--extra-args=CONFIG_USERSPACE=n | tee excludeuserspace.log
Note the detection methods above are not 100% perfect because some
flexible tests like tests/kernel/queue/src/main.c evade them with #ifdef
CONFIG_USERSPACE smarts. Considering they never break, it is purely the
test author's decision to include or not such flexible tests in the
"userspace" subset.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Use the new math_extras functions instead of calling builtins directly.
Change a few local variables to size_t after checking that all uses of
the variable actually expects a size_t.
Signed-off-by: Jakob Olesen <jolesen@fb.com>
If a test tries to create a user thread, and the platform
suppors user mode, and CONFIG_TEST_USERSPACE has not been
enabled, fail an assertion.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This macro is slated for complete removal, as it's not possible
on arches with an MPU stack guard to know the true buffer bounds
without also knowing the runtime state of its associated thread.
As removing this completely would be invasive to where we are
in the 1.14 release, demote to a private kernel Z_ API instead.
The current way that the macro is being used internally will
not cause any undue harm, we just don't want any external code
depending on it.
The final work to remove this (and overhaul stack specification in
general) will take place in 1.15 in the context of #14269Fixes: #14766
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Functions z_spin_lock_valid and z_spin_unlock_valid are essentially
boolean functions, just change their signature to return a bool instead
of an integer.
MISRA-C rule 10.1
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The pointer arithmetic used didn't account for ARC
supervisor mode stacks, which are allocated at the
end of the stack object. Use the new macro to know
exactly how much space is reserved.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The k_spin_lock() validation was setting the new owner of the spinlock
BEFORE the actual lock was taken, so it could race against other
processors trying the same thing. Split the modification step out
into a separate function that can be called after we affirmatively
have the lock.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Currently thread abort doesn't work if a thread is currently scheduled
on a different CPU, because we have no way of delivering an interrupt
to the other CPU to force the issue. This patch adds a simple
framework for an architecture to provide such an IPI, implements it
for x86_64, and uses it to implement a spin loop in abort for the case
where a thread is currently scheduled elsewhere.
On SMP architectures (xtensa) where no such IPI is implemented, we
fall back to waiting on an arbitrary interrupt to occur. This "works"
for typical code (and all current tests), but of course it cannot be
guaranteed on such an architecture that k_thread_abort() will return
in finite time (e.g. the other thread on the other CPU might have
taken a spinlock and entered an infinite loop, so it will never
receive an interrupt to terminate itself)!
On non-SMP architectures this patch changes no code paths at all.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Add a note in the documentatation of _setup_new_thread()
function stating that the caller is responsible for
providing a size argument that corresponds to the availabe
thread stack area.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Straightforward spinlock around the global thread state. Two changes
to the locking strategy were needed:
1. There was a needless recursive lock taken in schedule_new_thread().
This is only ever invoked in circumstances where the lock was already
held, or where there is no need for internal synchronization.
2. The recursive irq_lock() around the loop that spawns the initial
static threads (which happens at the start of main thread execution)
was removed. Most of the job (i.e. making sure the threads don't run
before the loop is finished) was already duplicated by the sched_lock
it was already taking, and the attempt to promise that all the
timeouts happen on the same tick is already true by construction at
system startup on uniprocessor systems, and not possible to guarantee
at all under SMP (where other CPUs can take that timer interrupt). We
don't document or test for this feature, so don't try to be fancy.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Just like with _Swap(), we need two variants of these utilities which
can atomically release a lock and context switch. The naming shifts
(for byte count reasons) to _reschedule/_pend_curr, and both have an
_irqlock variant which takes the traditional locking.
Just refactoring. No logic changes.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The validation checking recently added to spinlocks is useful, but
requires kernel-internals like _current and _current_cpu in a header
context that tends to be needed before those are declared (or where we
don't want them declared), and is causing big header dependency
headaches.
Move it to C code, it's just a validation tool, not a performance
thing.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
These two spots were duplicating logic that is already done inside
_reschedule(), which is the cleaner, less dangerous API. Use it where
possible when outside the scheduler internals.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This adds a simple implementation of SMP CPU affinity to Zephyr. The
API is simple and doesn't try to invent abstractions like "cpu sets".
Each thread has an enable/disable flag associated with each CPU in the
system, and the bits can be turned on and off (for threads that are
not currently runnable, of course) using an easy three-function API.
Because the implementation picked requires enumerating runnable
threads in priority order looking for one that match the current CPU,
this is not a good fit for the SCALABLE or MULTIQ scheduler backends,
so it currently can be enabled only for SCHED_DUMB (which is the
default anyway). Fancier algorithms do exist, but even the best of
them scale as O(N_CPUS), so aren't quite constant time and often
require significant memory overhead to keep separate lists for
different cpus/sets.
The intended use here is for apps that want to "pin" threads to
specific CPUs for latency control, or conversely to prevent certain
threads from taking time on specific CPUs to leave them free for fast
response.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This API was using variable number of arguments. Which is not
allowed according to misra c guidelines(Rule 17.1). Hence making
this API into a macro and using the util macro FOR_EACH_FIXED_ARG
to get the same functionality.
There is one deviation from the old function. The last argument
shouldn't be NULL.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
If we just had the kernel's implementation, we could
just move this to lib/, but possible arch-specific
implementations dictate that we just make this a
syscall.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Now that this is known to be an unused value, remove it from the API.
Note that this caught a few spots where we were passing values (a
non-NULL wait_q with a NULL thread handle) that were always being
ignored before.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This feature was a useless noop based on mistaken API understanding.
The idea seems to have been that k_busy_wait() included guards to
ensure "clock_always_on" was true duing the loop, presumably because
the original author was afraid that "turning the clock off" would
affect the operation of k_cycle_get_32().
Then later someone came around and "optimized" this for Quark SE,
where the cycle counter is the RTC and unrelated to the timer driver
used by the clock_always_on feature. (Except even there it presumably
should have been done at the SoC level and not just in the C1000
devboard -- note that Arduino 101 never would have gotten this).
But it was all a mistake: "clock_always_on" has nothing to do with
en/disabling the system cycle timer (which never happens when the
system is active, that's a feature of idle), it's a control over the
delivery of timer interrupts. And needless to say we don't care about
timer interrupts when we're spinning on a cycle counter.
Yank the whole mess.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The existing API defined sys_clock_{hw_cycles,ticks}_per_sec as simple
"variables" to be shared, except that they were only real storage in
certain modes (the HPET driver, basically) and everywhere else they
were a build constant.
Properly, these should be an API defined by the timer driver (who
controls those rates) and consumed by the clock subsystem. So give
them function syntax as a stepping stone to get there.
Note that this also removes the deprecated variable
_sys_clock_us_per_tick rather than give it the same treatment.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The builtin function __builtin_umul_overflow returns a boolean and
should not checked as an integer.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Added k_thread_name_set() and enable thread name setting when declaring
static threads. This is enabled only when THREAD_MONITOR is used. System
threads get a name by default.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Several style and typo fixes in inline comments of arm kernel
files and thread.c.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Make while statement using pointers explicitly check whether
the value is NULL or not.
The C standard does not say that the null pointer is the same
as the pointer to memory address 0 and because of this is a good
practice always compare with the macro NULL.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
MISRA C requires that every controlling expression of and if or while
statement have a boolean type.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
A lot of times this API is called during some cleanup even if the
timeout was not set to make the code simpler. In these cases it's not
necessary checking the return. Adding a cast to acknowledge it.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Move to more generic tracing hooks that can be implemented in different
ways and do not interfere with the kernel.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Define generic interface and hooks for tracing to replace
kernel_event_logger and existing tracing facilities with something more
common.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This enables reserving little space on the top of stack to store
data local to thread when CONFIG_USERSPACE. The first customer
of this is errno.
Note that ARC, due to how it lays out the user stack and
privilege stack, sets the pointer itself rather than
relying on the common way.
Fixes: #9067
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
irq_lock returns an unsigned int, though, several places was using
signed int. This commit fix this behaviour.
In order to avoid this error happens again, a coccinelle script was
added and can be used to check violations.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The errno "variable" is required to be thread-specific.
It gets defined to a macro which dereferences a pointer
returned by a kernel function.
In user mode, we cannot simply read/write the thread struct.
We do not have thread-local storage mechanism, so for now
use the lowest address of the thread stack to store this
value, since this is guaranteed to be read/writable by
a user thread.
The downside of this approach is potential stack corruption
if the stack pointer goes down this far but does not exceed
the location, since a fault won't be generated in this case.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Simplify k_thread_foreach API conditional inclusion by putting
the whole logic under CONFIG_THREAD_MONITOR config option.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
The original implementation of CONFIG_THREAD_MONITOR would
try to leverage a thread's initial stack layout to provide
the entry function with arguments for any given thread.
This is problematic:
- Some arches do not have a initial stack layout suitable for
this
- Some arches never enabled this at all (riscv32, nios2)
- Some arches did not enable this properly
- Dropping to user mode would erase or provide incorrect
information.
Just spend a few extra bytes to store this stuff directly
in the k_thread struct and get rid of all the arch-specific
code for this.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
All other checks of thread_state use a bit wise & operator incase
there are other flags attached to the thread_state. Let's fix
the only outlier in _check_stack_sentinel() to be the same.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
We generalize querying the entropy driver directly with
a new internal API, which is now used by CONFIG_STACK_RANDOM
and stack canary initialization.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Very simple implementation of deadline scheduling. Works by storing a
single word in each thread containing a deadline, setting it (as a
delta from "now") via a single new API call, and using it as extra
input to the existing thread priority comparison function when
priorities are equal.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The various macros to do checks in system call handlers all
implictly would generate a kernel oops if a check failed.
This is undesirable for a few reasons:
* System call handlers that acquire resources in the handler
have no good recourse for cleanup if a check fails.
* In some cases we may want to propagate a return value back
to the caller instead of just killing the calling thread,
even though the base API doesn't do these checks.
These macros now all return a value, if nonzero is returned
the check failed. K_OOPS() now wraps these calls to generate
a kernel oops.
At the moment, the policy for all APIs has not changed. They
still all oops upon a failed check/
The macros now use the Z_ notation for private APIs.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Some kernel APIs may need to allocate memory in order to function
correctly, especially if they are exposed to userspace where
buffers provided by user code cannot be trusted.
Instead of simply drawing from the system heap, specific pools
may instead be assigned to threads, and any requests made on
behalf of the calling thread will draw heap memory from that pool.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The _thread_entry() is not really a part of the kernel but a part of
the zephyr's C runtime support library. Hence moving just the
function to lib/thread_entry.c
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Add k_thread_foreach API to iterate over all the threads in
the system.
This API can be used for debugging threads in multi threaded
environment to dump and analyze various thread parameters like
priority, state, stack address etc...
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Almost everywhere this was called, it was immediately followed by
_abort_thread_timeout(), for obvious reasons. The only exceptions
were in timeout and k_timer expiration (unifying these two would be
another good cleanup), which are peripheral parts of the scheduler and
can plausibly use a more "internal" API.
So make the common case the default, and expose the old behavior as
_unpend_thread_no_timeout(). (Along with identical changes for
_unpend_first_thread) Saves code bytes and simplifies scheduler
surface area for future synchronization work.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Now that other work has eliminated the two cases where we had to do a
reschedule "but yield even if we are cooperative", we can squash both
down to a single _reschedule() function which does almost exactly what
legacy _Swap() did, but wrapped as a proper scheduler API.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
There was a somewhat promiscuous pattern in the kernel where IPC
mechanisms would do something that might effect the current thread
choice, then check _must_switch_threads() (or occasionally
__must_switch_threads -- don't ask, the distinction is being replaced
by real English words), sometimes _is_in_isr() (but not always, even
in contexts where that looks like it would be a mistake), and then
call _Swap() if everything is OK, otherwise releasing the irq_lock().
Sometimes this was done directly, sometimes via the inverted test,
sometimes (poll, heh) by doing the test when the thread state was
modified and then needlessly passing the result up the call stack to
the point of the _Swap().
And some places were just calling _reschedule_threads(), which did all
this already.
Unify all this madness. The old _reschedule_threads() function has
split into two variants: _reschedule_yield() and
_reschedule_noyield(). The latter is the "normal" one that respects
the cooperative priority of the current thread (i.e. it won't switch
out even if there is a higher priority thread ready -- the current
thread has to pend itself first), the former is used in the handful of
places where code was doing a swap unconditionally, just to preserve
precise behavior across the refactor. I'm not at all convinced it
should exist...
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
A priority value cannot be simultaneously higher than the maximum
possible value and smaller than the minimum value. Rewrite the
_VALID_PRIO() macro as a function so that this if either of these
invariants are invalid, the priority is considered invalid.
Coverity-CID: 182584
Coverity-CID: 182585
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
commit ec7ecf7900 moved some code around
such that the total_size variable is used regardless of how
CONFIG_MPU_REQUIRES_POWER_OF_TWO_ALIGNMENT is set. So move the
decleration of total_size outside of the ifndef block so things build
properly.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The handler for k_thread_create() wasn't verifying that the
provided stack size actually fits in the requested stack object
on systems that enforce power-of-two size/alignment for stacks.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
When randomizing the stack pointer on thread creation
(CONFIG_STACK_POINTER_RANDOM), the fuzz amount might exceed the stack
size, causing an underflow.
Ensure that this will never underflow by only adjusting the stack size
if there's enough space.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
The scheduler exposed two APIs to do the same thing:
_add_thread_to_ready_q() was a low level primitive that in most cases
was wrapped by _ready_thread(), which also (1) checks that the thread
_is_ready() or exits, (2) flags the thread as "started" to handle the
case of a thread running for the first time out of a waitq timeout,
and (3) signals a logger event.
As it turns out, all existing usage was already checking case #1.
Case #2 can be better handled in the timeout resume path instead of on
every call. And case #3 was probably wrong to have been skipping
anyway (there were paths that could make a thread runnable without
logging).
Now _add_thread_to_ready_q() is an internal scheduler API, as it
probably always should have been.
This also moves some asserts from the inline _ready_thread() wrapper
to the underlying true function for code size reasons, otherwise the
extra use of the inline added by this patch blows past code size
limits on Quark D2000.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This is a component of address space layout randomization that we can
implement even though we have a physical address space.
Support for upward-growing stacks omitted for now, it's not done
currently on any of our current or planned architectures.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The xtensa-asm2 work included a patch that added nano_internal.h
includes in lots of places that needed to have _Swap defined, because
it had to break a cycle and this no longer got pulled in from the arch
headers.
Unfortunately those new includes created new and more amusing cycles
elsewhere which led to breakage on other platforms.
Break out the _Swap definition (only) into a separate header and use
that instead. Cleaner. Seems not to have any more hidden gotchas.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
_Swap() is defined in nano_internal.h. Everything calls _Swap().
Pretty much nothing that called _Swap() included nano_internal.h,
expecting it to be picked up automatically through other headers (as
it happened, from the kernel arch-specific include file). A new
_Swap() is going to need some other symbols in the inline definition,
so I needed to break that cycle. Now nothing sees _Swap() defined
anymore. Put nano_internal.h everywhere it's needed.
Our kernel includes remain a big awful yucky mess. This makes things
more correct but no less ugly. Needs cleanup.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Remove unused _k_thread_single_start() as this logic is
now moved to _impl_k_thread_start().
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
This patch adds support for userspace on ARM architectures. Arch
specific calls for transitioning threads to user mode, system calls,
and associated handlers.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
When CONFIG_THREAD_MONITOR is enabled, repeated thread abort
calls on a dead thread will cause the _thread_monitor_exit to
crash.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
We have removed this features when we moved to the unified kernel. Those
functions existed to support migration from the old kernel and can go
now.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
On arches which have custom logic to do the initial swap into
the main thread, _current may be NULL. This happens when
instantiating the idle and main threads.
If this is the case, skip checks for memory domain and object
permission inheritance, in this case there is never anything to
inherit.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Kernel object metadata had an extra data field added recently to
store bounds for stack objects. Use this data field to assign
IDs to thread objects at build time. This has numerous advantages:
* Threads can be granted permissions on kernel objects before the
thread is initialized. Previously, it was necessary to call
k_thread_create() with a K_FOREVER delay, assign permissions, then
start the thread. Permissions are still completely cleared when
a thread exits.
* No need for runtime logic to manage thread IDs
* Build error if CONFIG_MAX_THREAD_BYTES is set too low
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fix init_group bit clearing in _k_thread_group_leave()
Fix _k_object_uninit calling order. Though the order won't
make much difference in this case it is always good to destroy
or uninitialize in the reverse order of the object creation or
initialization.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
This is a runtime counterpart to K_THREAD_ACCESS_GRANT().
This function takes a thread and a NULL-terminated list of kernel
objects and runs k_object_access_grant() on each of them.
This function doesn't require any special permissions and doesn't
need to become a system call.
__attribute__((sentinel)) added to warn users if they omit the
required NULL termination.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
It's possible to declare static threads that start up as K_USER,
but these threads can't do much since they start with permissions on
no kernel objects other than their own thread object.
Rather than do some run-time synchronization to have some other thread
grant the necessary permissions, we introduce macros
to conveniently assign object permissions to these threads when they
are brought up at boot by the kernel. The tables generated here
are constant and live in ROM when possible.
Example usage:
K_THREAD_DEFINE(my_thread, STACK_SIZE, my_thread_entry,
NULL, NULL, NULL, 0, K_USER, K_NO_WAIT);
K_THREAD_ACCESS_GRANT(my_thread, &my_sem, &my_mutex, &my_pipe);
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Currently this is defined as a k_thread_stack_t pointer.
However this isn't correct, stacks are defined as arrays. Extern
references to k_thread_stack_t doesn't work properly as the compiler
treats it as a pointer to the stack array and not the array itself.
Declaring as an unsized array of k_thread_stack_t doesn't work
well either. The least amount of confusion is to leave out the
pointer/array status completely, use pointers for function prototypes,
and define K_THREAD_STACK_EXTERN() to properly create an extern
reference.
The definitions for all functions and struct that use
k_thread_stack_t need to be updated, but code that uses them should
be unchanged.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
User threads can only create other nonessential user threads
of equal or lower priority and must have access to the entire
stack area.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We need to track permission on stack memory regions like we do
with other kernel objects. We want stacks to live in a memory
area that is outside the scope of memory domain permission
management. We need to be able track what stacks are in use,
and what stacks may be used by user threads trying to call
k_thread_create().
Some special handling is needed because thread stacks appear as
variously-sized arrays of struct _k_thread_stack_element which is
just a char. We need the entire array to be considered an object,
but also properly handle arrays of stacks.
Validation of stacks also requires that the bounds of the stack
are not exceeded. Various approaches were considered. Storing
the size in some header region of the stack itself would not allow
the stack to live in 'noinit'. Having a stack object be a data
structure that points to the stack buffer would confound our
current APIs for declaring stacks as arrays or struct members.
In the end, the struct _k_object was extended to store this size.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
It's currently too easy to run out of thread IDs as they
are never re-used on thread exit.
Now the kernel maintains a bitfield of in-use thread IDs,
updated on thread creation and termination. When a thread
exits, the permission bitfield for all kernel objects is
updated to revoke access for that retired thread ID, so that
a new thread re-using that ID will not gain access to objects
that it should not have.
Because of these runtime updates, setting the permission
bitmap for an object to all ones for a "public" object doesn't
work properly any more; a flag is now set for this instead.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This will allow these thread objects to be re-used.
_mark_thread_as_dead() removed, it was only being called in one
place.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Use some preprocessor trickery to automatically deduce the amount of
arguments for the various _SYSCALL_HANDLERn() macros. Makes the grunt
work of converting a bunch of kernel APIs to system calls slightly
easier.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
By default, threads are created only having access to their own thread
object and nothing else. This new flag to k_thread_create() gives the
thread access to all objects that the parent had at the time it was
created, with the exception of the parent thread itself.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We now have macros which should significantly reduce the amount of
boilerplate involved with defining system call handlers.
- Macros which define the proper prototype based on number of arguments
- "SIMPLE" variants which create handlers that don't need anything
other than object verification
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Use new _SYSCALL_OBJ/_SYSCALL_OBJ_INIT macros.
Use new _SYSCALL_MEMORY_READ/_SYSCALL_MEMORY_WRITE macros.
Some non-obvious checks changed to use _SYSCALL_VERIFY_MSG.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We want applications to be able to enable and disable userspace without
changing any code. k_thread_user_mode_enter() now just jumps into the
entry point if CONFIG_USERSPACE is disabled.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>