This commit limits the data length code to eight.
DLC > 8 returns a newly introduced CAN_TX_EINVAL error code.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This generic video API can be used to capture/output video frames.
Once a video buffer is enqueued to a video device endpoint, device owns
the buffer and can process to capture (camera), output (disk, display),
convert (hw encoder)... User can then call dequeue to retrieve
the processed buffer (video driver ensure cache coherency).
Once dequeued, video buffer is owned by user (e.g. for frame
processing, display buffer update, write to media, etc...).
For each video-buffer, user needs allocate the associated frame buffer
via video_buffer_alloc. Buffer format is defined by video device
endpoint configuration. Video device can be controlled (e.g. contrast,
brightness, flip...) via controls.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
can_copy_zframe_to_frame did not distinguish between the standard and
extended frames. As a result, uninitialized bits were copied to the
destination frame. This commit changes the function to use the correct
bitfields.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This commit extends the CAN API with the following functions:
- can_get_state
- can_recover
- can_register_state_change_isr
This functions can be used to get the error-counters and the state
of the CAN controller. The recover function can be used to recover
from bus-off state when automatic recovery is disabled.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Add a simple inline function and some definitions to faciliate
inter-processor interrupts for SMP initialization/synchronization.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
In the general case, the local APIC can't be treated as a normal device
with a single boot-time initialization - on SMP systems, each CPU must
initialize its own. Hence the initialization proper is separated from
the device-driver initialization, and said initialization is called
from the early startup-assembly code when appropriate.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
As it is possible that hci_acl_handle generates an overflow hci event,
the high priority thread must be able to processed it.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Changed return parameter description from
"@retval filter id on success" to
"@retval filter_id on success".
This change suppresses the doxy warnings.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Reimplementation of clock control driver for nrf platform. It includes
latest API changes: asynchronous starting and getting clock status.
Additionally, it implements calibration algorithm which optionally
skips calibration based on no temperature change. Internal temperature
sensor is used for that.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Header files of nrfx HALs are not supposed to be included directly
but only with their names prepended with the hal/ directory (so that
an inclusion of an nrfx HAL header clearly differs from an inclusion
of an nrfx driver header).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
console_register_line_input has been deprecated for at least 2 releases
so we can now remove it. Remove native_stdin_register_input that is
associated with console_register_line_input.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fix minor issues in doxygen comments. Do not use typedefs for internal
driver API calls. The functions are declared directly in
`struct gpio_driver_api`. No functional changes.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Following functions have been deprecated for at least 2 releases. This
commit removes them:
- gpio_port_configure
- gpio_port_write
- gpio_port_read
- gpio_port_enable_callback
- gpio_port_disable_callback
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
counter_set_alarm and counter_get_user_data have been deprecated for at
least 2 releases. We can now remove them.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
From the Jailhouse days, this has been a function call. That's silly.
We now inline the EOI in the ISR when in x2APIC mode. Also clean up
z_irq_controller_eoi(), so it now uses the inline macros.
Also, we now enable x2APIC on up_squared by default.
Fixes: #17133
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
We've had a number of API functions for I2C marked as deprecated for 2
releases. We can now remove them.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This has been subsumed by the new implementation in drivers/pcie.
We remove the legacy subsystem, related tests, shell module, and
outdated documentation/config references.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
The inclusion of the generated syscall files is placed outside the
extern "C" block as the generated file has its own extern "C" block.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This commit introduces a timestamp for received CAN frames.
The timestamp is optional and can be activated via Kconfig.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This board and SoC was discontinued some time ago and is currently not
maintained in the zephyr tree.
Remove all associated configurations and variants from the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Updated the documentation of display_blanking_on and
display_blanking_off to clarify its usage.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Added note on read alignment requirement in order to make
a user more conscious of restrictions.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Added flags for controling detection of setting alarm to late.
Updated drivers to return -ENOTSUP when new option is requested.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Flags in alarm configuration structure will allow further extention
without breaking API. Initially, existing absolute flag was added
as the only flag.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Doxygen comment was referencing deprecated function counter_set_alarm
when the intention was to reference counter_set_channel_alarm.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The MVIC is no longer supported, and only the APIC-based interrupt
subsystem remains. Thus this layer of indirection is unnecessary.
This also corrects an oversight left over from the Jailhouse x2APIC
implementation affecting EOI delivery for direct ISRs only.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
These inlines currently only apply to IA32, so place accordingly.
Minor changes to direct and indirect users of the file for ordering.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Extended clock configuration to allow usage of external clock
source for nrf52 series.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The counter API changed recently, and more specifically the
counter_set_top_value() now takes a configuration structure instead of
direct parameters. Adapt the rtc.h header so that it uses the new
signature correctly.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Change @file entry on some headers due to duplicated files in the
include/ tree (real header + shim).
Adapt the doxygen configuration file to the new locations and remove
directories which are already included.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/slist.h to sys/slist.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/__assert.h to sys/__assert.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move ring_buffer.h to sys/ring_buffer.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move display.h to drivers/display.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move uart.h to drivers/uart.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move spi.h to drivers/spi.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move sensor.h to drivers/sensor.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move rtc.h to drivers/rtc.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move pwm.h to drivers/pwm.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move pinmux.h to drivers/pinmux.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move led_strip.h to drivers/led_strip.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move led.h to drivers/led.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move ipm.h to drivers/ipm.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move i2s.h to drivers/i2s.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move i2c.h to drivers/i2c.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move hwinfo.h to drivers/hwinfo.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move gpio.h to drivers/gpio.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move gna.h to drivers/gna.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move flash.h to drivers/flash.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move entropy.h to drivers/entropy.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move dma.h to drivers/dma.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move counter.h to drivers/counter.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move clock_control.h to drivers/clock_control.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move can.h to drivers/can.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move aio_comparator.h to drivers/aio_comparator.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move adc.h to drivers/adc.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move watchdog.h to drivers/watchdog.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The first word is used as a pointer, meaning it is 64 bits on 64-bit
systems. To reserve it, it has to be either a pointer, a long, or an
intptr_t. Not an int nor an u32_t.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Move modem_receiver.h to the driver directory. No other users in the
tree and it is a private header.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move internal and architecture specific headers from include/drivers to
subfolder for timer:
include/drivers/timer
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move internal and architecture specific headers from include/drivers to
subfolder for interrupt_controller:
include/drivers/interrupt_controller/
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The Quark D2000 is the only x86 with an MVIC, and since support for
it has been dropped, the interrupt controller is orphaned. Removed.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This trivial patch extends the PCIe shell to check for and report
on a device's ability to use MSI-X interrupt signaling.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
MSRs related to x2APIC will never be accessed directly by name, but
rather via an offset from a base MSR, so the definitions are removed
from msr.h.
New local APIC accessor functions, which are sensitive to xAPIC vs
x2APIC mode (CONFIG_X2APIC), are added to include/drivers/loapic.h.
These accessors use the MSR definitions as modified above.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Simple renaming and Kconfig reorganization. Choice of local APIC
access method isn't specific to the Jailhouse hypervisor.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Implement HCI driver for STM32WB. It allows host to controller.
It is based on ST library allowing communication over RAM shared
bewteen chip's C-M4 and C-M0 cores.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Some firmwares (looking at you, slimbootloader) don't set the registers
in PCI configuration space to indicate the IRQ routing, so we remove
the check that verifies that the user and firmware agree on IRQ number.
Also eliminate the return value of pcie_irq_enable() since no one uses
it and we can't return a meaningful value any longer.
Signed-off-by: Charles Youse <charles.youse@intel.com>
The HT16K33 is a memory mapping, multifunction LED controller
driver. The controller supports up to 128 LEDs (up to 16 rows and 8
commons) and matrix key scan circuit of up to 13x3 keys.
This commit adds support for the keyscan functionality of the HT16K33.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Firmware is supposed to set a register in PCI configuration space which
indicates the hardware IRQ that the endpoint is attached to.
A function is implemented which reads this register, and the PCIe shell
is updated to use it instead of doing it "manually".
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
A new function pcie_irq_enable() is added to be used in lieu of
irq_enable() when the target device is PCI(e)-attached. The function
attempts to use MSI, when configured in the kernel and supported by
the endpoint; failing that, it will verify that IRQ requested is in
fact routed to the device by the boot firmware before enabling it.
The NS16550 UART driver is updated to use pcie_irq_enable().
The PCI(e) shell is extended to dump information about wired IRQs.
The up_squared devicetree is fixed (reverted?) to IRQ5 for UART1.
The galileo enables MSI by default.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
In order to generalize the currently specialized nRF51 IC setup hook,
make the following changes:
- Generalize the hook to bt_ic_setup()
- Use a weak NOP version by default
- Move the currently existing one to the board folder
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Added option to have LFCLK synthesized from HFCLK. It is not low
power but ensures constant relation between HFCLK and LFCLK and
might be useful in certain scenarios (e.g. testing).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
A parallel PCI implementation ("pcie") is added with features for PCIe.
In particular, message-signaled interrupts (MSI) are supported, which
are essential to the use of any non-trivial PCIe device.
The NS16550 UART driver is modified to use pcie.
pcie is a complete replacement for the old PCI support ("pci"). It is
smaller, by an order of magnitude, and cleaner. Both pci and pcie can
(and do) coexist in the same builds, but the intent is to rework any
existing drivers that depend on pci and ultimately remove pci entirely.
This patch is large, but things in mirror are smaller than they appear.
Most of the modified files are configuration-related, and are changed
only slightly to accommodate the modified UART driver.
Deficiencies:
64-bit support is minimal. The code works fine with 64-bit capable
devices, but will not cooperate with MMIO regions (or MSI targets) that
have high bits set. This is not needed on any current boards, and is
unlikely to be needed in the future. Only superficial changes would
be required if we change our minds.
The method specifying PCI endpoints in devicetree is somewhat kludgey.
The "right" way would be to hang PCI devices off a topological tree;
while this would be more aesthetically pleasing, I don't think it's
worth the effort, given our non-standard use of devicetree.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The existing device_set_power_state() API works only in synchronous
mode and this is not desirable for devices(ex: Gyro) which take
longer time (few 100 mSec) to suspend/resume.
To support async mode, a new callback argument is added to the API.
The device drivers can asynchronously suspend/resume and call the
callback function upon completion of the async request.
This commit adds the missing callback parameter to all the drivers
to make it compliant with the new API.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Rearranges functions to public and private groups,
and adds missing function comments.
Signed-off-by: Georgij Cernysiov <g.cernysiov@elco-automation.de>
This commit adds support for remote wakeup and extends USB api
with a wakeup request call. Remote wakeup can be dsabled in kconfig
when a specific driver does not support this feature.
Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
This is an application facing define, specific to this
driver, for the public uart_drv_cmd() API. Put it with
public headers.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Websocket was removed in 1cba0161ed so
remove dead Kconfig references to CONFIG_WEBSOCKET_CONSOLE and
associated dead code/files.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit renames the nrf5_clock_control.h and
nrf5_clock_control.c files to nrf_clock_control.h and
nrf_clock_control.c, respectively, as they are used
in nRF9160 builds, as well.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit renames the CLOCK_CONTROL_NRF5 Kconfig symbol to
CLOCK_CONTROL_NRF. The change is required to aleviates confusion
when selecting the symbol in nRF9160 SOC definition.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Start of Frame events can now be accessed from USB classes.
This will be useful when implementing idle rate functionality.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
The entropy_nrf_get_entropy_isr(), which is specific to this driver,
is in fact equivalent of generic entropy_get_entropy_isr(..., 0).
This commit removes the entropy_nrf_get_entropy_isr() function
and replaces its usage by call to generic entropy API.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
This wasn't explained correctly. The tick convention we use here
(owing to the way legacy code was written) is a little weird. Timeout
delays are passed in a "round down" sense, so that setting a timeout
in "one tick" means that the interrupt will arrive anywhere between
zero and one ticks in the future.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Clarify behavior of the ticks argument to z_clock_set_timeout() and
add an important note about expected behavior in SMP environments.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The current z_clock_uptime() call (recently renamed from
_get_elapsed_program_time) requires the driver to track a full 64 bit
uptime value in ticks, which is entirely separate from the one the
kernel is already keeping.
Don't do that. Just ask the drivers to track uptime since the last
call to z_clock_announce(), since that is going to map better to
built-in hardware capability.
Obviously existing drivers already have this feature, so they're
actually getting slightly larger in order to implement the new API in
terms of the old one. But future drivers will thank us.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The tickless driver had a bunch of "hairy" APIs which forced the timer
drivers to do needless low-level accounting for the benefit of the
kernel, all of which then proceeded to implement them via cut and
paste. Specifically the "program_time" calls forced the driver to
expose to the kernel exactly when the next interrupt was due and how
much time had elapsed, in a parallel API to the existing "what time is
it" and "announce a tick" interrupts that carry the same information.
Remove these from the kernel, replacing them with synthesized logic
written in terms of the simpler APIs.
In some cases there will be a performance impact due to the use of the
64 bit uptime call, but that will go away soon.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Rename timer driver API functions to be consistent. ADD DOCS TO THE
HEADER so implementations understand what the requirements are.
Remove some unused functions that don't need declarations here.
Also removes the per-platform #if's around the power control callback
in favor of a weak-linked noop function in the driver initialization
(adds a few bytes of code to default platforms -- we'll live, I
think).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The existing API had two almost identical functions: _set_time() and
_timer_idle_enter(). Both simply instruct the timer driver to set the
next timer interrupt expiration appropriately so that the call to
z_clock_announce() will be made at the requested number of ticks. On
most/all hardware, these should be implementable identically.
Unfortunately because they are specified differently, existing drivers
have implemented them in parallel.
Specify a new, unified, z_clock_set_timeout(). Document it clearly
for implementors. And provide a shim layer for legacy drivers that
will continue to use the old functions.
Note that this patch fixes an existing bug found by inspection: the
old call to _set_time() out of z_clock_announce() failed to test for
the "wait forever" case in the situation where clock_always_on is
true, meaning that a system that reached this point and then never set
another timeout would freeze its uptime clock incorrectly.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
There were three separate "announce ticks" entry points exposed for
use by drivers. Unify them to just a single z_clock_announce()
function, making the "final" tick announcement the business of the
driver only, not the kernel.
Note the oddness with "_sys_idle_elapsed_ticks": this was a global
variable exposed by the kernel. But it was never actually used by the
kernel. It was updated and inspected only within the timer drivers,
and only so that it could be passed back to the kernel as the default
(actually hidden) argument to the announce function. Break this false
dependency by putting this variable into each timer driver
individually.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
posix_flush_stdout() must be provided by any board
using CONFIG_NATIVE_POSIX_CONSOLE, not just by those using
CONFIG_NATIVE_POSIX_STDOUT_CONSOLE
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
* Add usbd_dc_nrfx shim
The shim is based on the previous one usbd_dc_nrf5.
For handling the USBD hardware, tested nrfx_usbd driver from nRF SDK
was used.
Briefly tested examples:
* usb/cdc_acm
* usb/dfu (USB communication only due to flash handling issues)
* usb/hid-mouse
* bluetooth/hci_usb
Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
usb_dc_status_callback() parameters are interface or configuration
numbers and should be const.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Any word started with underscore followed by and uppercase letter or a
second underscore is a reserved word according with C99.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Clean doxygen documentation and add _usb_device_controller_api group
to be added to the API documentation.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This reverts commit 8dcd5f8c77.
Single thread keep introducing more issues, decided to remove the
feature completely and push any required changes for after 1.13.
See #9808
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The kernel timer subsystem isn't part of the !MULTITHREADING
environment (no threads to wake up, though in principle it should be
possible to support timeout callbacks with some work in the future).
Protect it against platforms that select this but still enable a timer
driver.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Modem drivers need a fast buffer-based receiver for passing data
back and forth from the UART to the driver. This provides an
efficient configuarable driver which merely sends and receives
but doesn't process the data, that's left up to the modem driver.
Signed-off-by: Michael Scott <mike@foundries.io>
On 'drivers/i2c_esp32.c' there are functions useful for other
drivers. Functions and struct went moved to:
* arch/xtensa/soc/esp32/peripheral.h
* arch/xtensa/soc/esp32/soc.h
* include/drivers/gpio/gpio_esp32.h
Signed-off-by: Vitor Massaru Iha <vitor@massaru.org>
Add callback codes for Set/Clear Feature ENDPOINT_HALT.
These can be used to inform a function that the device stack has
received Set/Clear Feature request ENDPOINT_HALT. The function can
then abort or restart the transfer accordingly.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Add a new EEPROM simulated driver with all it's build infrastructure.
The EEPROM can be loaded/poked from applications by getting its funcs.
It is multi-instance capable, right now 2 instances are supported by
enabling them in KConfig.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Daniel Wagenknecht <wagenknecht@clage.de>
Add API function to check capabilities of an endpoint.
It should be used to check the capabilities of an endpoint
before configuration. The driver should return 0 if the
endpoint configuration is possible.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Introduce a quirks field to the HCI driver struct, which can be used
to create exceptions in host behavior for non-standard or unusual
controller behavior. An initial quirk is added to prevent the host
from sending the HCI_Reset command (in which case the controller is
responsible for performing the reset).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Implement the new entropy_get_entropy_isr() function to allow the kernel
to collect entropy before the scheduler and kernel data structures are
ready. Switch to an nrf-specific version for high-performance
requirements in the BLE Link Layer.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Minimal driver for ILI9340 LCD display driver including support
for adafruit 2.2" LCD display (1480)
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Previous way was cumbersome (based on an old way for cc2520 actually),
so moving towards the more recent and proper way.
This will enable anybody to actually provide gpio configuration for a
winc1500 out of any board specific location.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add new status event indicating an interface has been selected.
Interface and its endpoint(s) are enabled.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Add console driver that allows console session to be transferred
over a websocket connection.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
nRF52840 USBD requires power events to start USB enumeration.
Add APIs to enable/disable the power events, read the USB VBUS detect
and output power ready statuses which can then be used by the USB driver
in the enumeration sequence.
Signed-off-by: Sundar Subramaniyan <sundar.subramaniyan@gmail.com>
The rand driver present in the BLE Link Layer is able to provide
entropy for both threads and ISRs, and so it is more suited to be used
as a generic nRF5x entropy driver instead of the current one. This will
allow applications and the Link Layer to use the same driver without
duplicating it.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Now the native console driver also handles stdin
so we can drive the shell from the command line,
a pipe or a file
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
CC1200 is a sub-ghz chip supporting 6 ISM & SRD bands: 169, 433, 470,
868, 915 and 920 MHz, with features dedicated to IEEE 802.15.4(g).
Current driver enables CC1200 against actual IEEE 802.15.4 Soft-MAC. 'g'
version support in the Soft-MAC will follow later.
The chip itself is closer to a bare metal radio modem than to a usual
15.4 chip: up to the user to provide the right RF settings for the
carrier band. Such settings can be generaten through TI's SmartRF tool.
Hopefully, for channel selection, this driver will be clever enough to
compute the proper register change without any special input from the
user. This will work for all the bands supported by the chip.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Besides the fact that we did not have that for the current supported
boards, that makes sense for this new, virtualized mode, that is meant
to be run on top of full-fledged x86 64 CPUs.
By having xAPIC mode access only, Jailhouse has to intercept those MMIO
reads and writes, in order to examine what they do and arbitrate if it's
safe or not (e.g. not all values are accepted to ICR register). This
means that we can't run away from having a VM-exit event for each and
every access to APIC memory region and this impacts the latency the
guest OS observes over bare metal a lot.
When in x2APIC mode, Jailhouse does not require VM-exits for MSR
accesses other that writes to the ICR register, so the latency the guest
observes is reduced to almost zero.
Here are some outputs of the the command line
$ sudo ./tools/jailhouse cell stats tiny-demo
on a Jailhouse's root cell console, for one of the Zephyr demos using
LOAPIC timers, left for a couple of seconds:
Statistics for tiny-demo cell (x2APIC root, x2APIC inmate)
COUNTER SUM PER SEC
vmexits_total 7 0
vmexits_management 3 0
vmexits_cr 2 0
vmexits_cpuid 1 0
vmexits_msr 1 0
vmexits_exception 0 0
vmexits_hypercall 0 0
vmexits_mmio 0 0
vmexits_pio 0 0
vmexits_xapic 0 0
vmexits_xsetbv 0 0
Statistics for tiny-demo cell (xAPIC root, xAPIC inmate)
COUNTER SUM PER SEC
vmexits_total 4087 40
vmexits_xapic 4080 40
vmexits_management 3 0
vmexits_cr 2 0
vmexits_cpuid 1 0
vmexits_msr 1 0
vmexits_exception 0 0
vmexits_hypercall 0 0
vmexits_mmio 0 0
vmexits_pio 0 0
vmexits_xsetbv 0 0
Statistics for tiny-demo cell (xAPIC root, x2APIC inmate)
COUNTER SUM PER SEC
vmexits_total 4087 40
vmexits_msr 4080 40
vmexits_management 3 0
vmexits_cr 2 0
vmexits_cpuid 1 0
vmexits_exception 0 0
vmexits_hypercall 0 0
vmexits_mmio 0 0
vmexits_pio 0 0
vmexits_xapic 0 0
vmexits_xsetbv 0 0
See that under x2APIC mode on both Jailhouse/root-cell and guest, the
interruptions from the hypervisor are minimal. That is not the case when
Jailhouse is on xAPIC mode, though. Note also that, as a plus, x2APIC
accesses on the guest will map to xAPIC MMIO on the hypervisor just
fine.
Signed-off-by: Gustavo Lima Chaves <gustavo.lima.chaves@intel.com>
We were unnecessarily pulling in headers which resulted in kernel.h
being pulled in, which is undesirable since arch/cpu.h pulls in
these headers.
Added integral type headers since we do need those.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Some "random" drivers are not drivers at all: they just implement the
function `sys_rand32_get()`. Move those to a random subsystem in
preparation for a reorganization.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Currently this is defined as a k_thread_stack_t pointer.
However this isn't correct, stacks are defined as arrays. Extern
references to k_thread_stack_t doesn't work properly as the compiler
treats it as a pointer to the stack array and not the array itself.
Declaring as an unsized array of k_thread_stack_t doesn't work
well either. The least amount of confusion is to leave out the
pointer/array status completely, use pointers for function prototypes,
and define K_THREAD_STACK_EXTERN() to properly create an extern
reference.
The definitions for all functions and struct that use
k_thread_stack_t need to be updated, but code that uses them should
be unchanged.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
If CS (Chip Select, known also as Slave Select...) is managed externaly
of the stm32_ll SPI controller, just config NSS line management
accordingly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Composite multifunction USB devices should be able to know about
configuration change, implement it through existing callback.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Now that we have an mcux shim driver, remove the old k64-specific
driver. Also remove include/drivers/k20_sim.h, since the old
k64-specific driver was the only thing left using it.
Jira: ZEP-2025
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The API name space for Bluetooth is bt_* and BT_* so it makes sense to
align the Kconfig name space with this. The additional benefit is that
this also makes the names shorter. It is also in line with what Linux
uses for Bluetooth Kconfig entries.
Some Bluetooth-related Networking Kconfig defines are renamed as well
in order to be consistent, such as NET_L2_BLUETOOTH.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Historically, stacks were just character buffers and could be treated
as such if the user wanted to look inside the stack data, and also
declared as an array of the desired stack size.
This is no longer the case. Certain architectures will create a memory
region much larger to account for MPU/MMU guard pages. Unfortunately,
the kernel interfaces treat both the declared stack, and the valid
stack buffer within it as the same char * data type, even though these
absolutely cannot be used interchangeably.
We introduce an opaque k_thread_stack_t which gets instantiated by
K_THREAD_STACK_DECLARE(), this is no longer treated by the compiler
as a character pointer, even though it really is.
To access the real stack buffer within, the result of
K_THREAD_STACK_BUFFER() can be used, which will return a char * type.
This should catch a bunch of programming mistakes at build time:
- Declaring a character array outside of K_THREAD_STACK_DECLARE() and
passing it to K_THREAD_CREATE
- Directly examining the stack created by K_THREAD_STACK_DECLARE()
which is not actually the memory desired and may trigger a CPU
exception
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add "clocks" property on u(s)arts nodes on stm32 socs
Add a dt clocks binding file and rework clock_control
header file include new device tree binding file.
include/dt-bindings folder is introduced as dt-bindings
placeholder
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add a SPI master and slave driver for the L4, F4 and F3 STM32
SoCs families.
Change-Id: I1faf5c97f992c91eba852fd126e7d3b83158993d
Origin: Original
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Tested-by: Lee Jones <lee.jones@linaro.org>
The Bluetooth subsystem assumes execution of its system threads in
cooperative priority, including the system workqueue and the thread
that interact with the controller (i.e. calling bt_send). This commit
adds a compile-time check for the system workqueue priority and
documentation for the bt_send API call.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Following introduction of stm32cube LL based clock control driver,
remove references to former native driver.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Following activation of stm32 common clock driver for stm32f4 series
remove references to stm32f4 specific driver.
Change-Id: I372a0ea046007bcb34944d6b2b8880077583b1d3
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Adds event based scheduling logic to the kernel. Updates
management of timeouts, timers, idling etc. based on
time tracked at events rather than periodic ticks. Provides
interfaces for timers to announce and get next timer expiry
based on kernel scheduling decisions involving time slicing
of threads, timeouts and idling. Uses wall time units instead
of ticks in all scheduling activities.
The implementation involves changes in the following areas
1. Management of time in wall units like ms/us instead of ticks
The existing implementation already had an option to configure
number of ticks in a second. The new implementation builds on
top of that feature and provides option to set the size of the
scheduling granurality to mili seconds or micro seconds. This
allows most of the current implementation to be reused. Due to
this re-use and co-existence with tick based kernel, the names
of variables may contain the word "tick". However, in the
tickless kernel implementation, it represents the currently
configured time unit, which would be be mili seconds or
micro seconds. The APIs that take time as a parameter are not
impacted and they continue to pass time in mili seconds.
2. Timers would not be programmed in periodic mode
generating ticks. Instead they would be programmed in one
shot mode to generate events at the time the kernel scheduler
needs to gain control for its scheduling activities like
timers, timeouts, time slicing, idling etc.
3. The scheduler provides interfaces that the timer drivers
use to announce elapsed time and get the next time the scheduler
needs a timer event. It is possible that the scheduler may not
need another timer event, in which case the system would wait
for a non-timer event to wake it up if it is idling.
4. New APIs are defined to be implemented by timer drivers. Also
they need to handler timer events differently. These changes
have been done in the HPET timer driver. In future other timers
that support tickles kernel should implement these APIs as well.
These APIs are to re-program the timer, update and announce
elapsed time.
5. Philosopher and timer_api applications have been enabled to
test tickless kernel. Separate configuration files are created
which define the necessary CONFIG flags. Run these apps using
following command
make pristine && make BOARD=qemu_x86 CONF_FILE=prj_tickless.conf qemu
Jira: ZEP-339 ZEP-1946 ZEP-948
Change-Id: I7d950c31bf1ff929a9066fad42c2f0559a2e5983
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types. This handles the remaining includes and kernel, plus
touching up various points that we skipped because of include
dependancies. We also convert the PRI printf formatters in the arch
code over to normal formatters.
Jira: ZEP-2051
Change-Id: Iecbb12601a3ee4ea936fd7ddea37788a645b08b0
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: I4ec03eb2183d59ef86ea2c20d956e5d272656837
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: I8f57a17f78e674aca5400f005db8975c9f9e150e
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This is a start to move away from the C99 {u}int{8,16,32,64}_t types to
Zephyr defined u{8,16,32,64}_t and s{8,16,32,64}_t. This allows Zephyr
to define the sized types in a consistent manor across all the
architectures we support and not conflict with what various compilers
and libc might do with regards to the C99 types.
We introduce <zephyr/types.h> as part of this and have it include
<stdint.h> for now until we transition all the code away from the C99
types.
We go with u{8,16,32,64}_t and s{8,16,32,64}_t as there are some
existing variables defined u8 & u16 as well as to be consistent with
Zephyr naming conventions.
Jira: ZEP-2051
Change-Id: I451fed0623b029d65866622e478225dfab2c0ca8
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
It is envisaged that this will be used by SoC or board code to make
available fixed purpose memory-mapped i/o registers to the rest of the
system which normally expects to use GPIO devices, e.g. for driving chip
select lines, LEDs or reading button states.
As such, the driver code doesn't provide a kconfig based configuration
mechanism, instead SoC/board code can hard-wire the devices it wants
with something simple like:
GPIO_MMIO32_INIT(misc_reg1, "MISC1", 0x12345678, 0xffffffffu)
Then, for example, if bit N of the register at 0x12345678 is wired up as
an SPI device chip select line, the SPI driver could be configured to
use pin N of the "MISC1" GPIO driver and not need any other board
specific code.
Change-Id: Ib02fcbab73fcf9637e25834db060fb3108626f47
Signed-off-by: Jon Medhurst <tixy@linaro.org>
Removes unused k20 and k6x header files that defined peripheral
registers now covered by CMSIS.
Change-Id: Ib11b19a290c6cc4b83f1b67455145fe2b86210c8
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This change introduces console_getchar() and console_getline() API
calls which can be used to get pending console input (either one
char or whole line), or block waiting for one. In this regard, they
are similar to well-known ANSI C function getchar/gets/fgets, and
are intended to ease porting of existing applications to Zephyr, and
indeed, these functions (shaped as an external module) are already
used by few applications.
The implementation of the functions is structured as a new "console"
subsystem. The intention is that further generic console code may be
pulled there instead of being in drivers/console/. Besides the
functions themselves, initialization code and sample applications
are included.
At this time, there're may limitations of how these functions can
be used. For example, console_getchar() and console_getline() are
mutually exclusive, and both are incompatible with callback
(push-style) console API (and e.g. with console shell subsystem
which uses this API). Again, the intention is to make a first step
towards refactoring console subsystem to allow more flexible
real-world usage, better reusability and composability.
Change-Id: I3f4015bb5b26e0656f82f428b11ba30e980d25a0
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Add several missing clocks that are used by other members of the STM32F4
family. This is needed to add support for various hardware, like UART9
and UART10 on STM32F413.
Change-Id: I6f1a04ddece90a04e31a1710065545179b0e530d
Signed-off-by: Florian Vaussard <florian.vaussard@heig-vd.ch>
It appears that enable bits for BKPSRAM and CCMDATARAM are incorrectly
defined as bit 14 and 16 on AHB1 respectively (when these IPs are present),
where we should use bit 18 and 20 according to the various reference
manuals (STM32F415 for instance).
Change-Id: I44ce59a29c57e306f6a945e46043efbcfce7a92f
Signed-off-by: Florian Vaussard <florian.vaussard@heig-vd.ch>
Declaring these as const lets the linker generate more optimal code.
Some extra care is needed with hci_ecc.c since it was overwriting the
send callback. Now the choice of send() call is done directly in the
bt_send() function
Change-Id: Iac74f5ee9bee097bbb34c11bd13d1d886700f5cc
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Some GPIO ports activation where missing since not used
on available soc/boards.
Since stm32 family increases, activation of these ports
should be made available.
Jira: ZEP-1551
Change-Id: I612d135b28ef255bc771599e33796671ff81d0ac
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
After introduction and activation of STM32Cube LL based driver on
F3 and L4 series, this commit removes the no more needed code for
native driver for these soc.
Change-Id: I266d1a3fc4b464cee34b1cc1a1a333c5bf923e41
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This new clock control driver aims at providing a lightweight
generic driver to the whole stm32 family.
Driver is based on LL Cube API and hence is for now available
only for STM32 supporting this API: stm32f3xx and stm32l4xx.
Other families should be supported soon.
Once globally supported, this unique driver will also help
reducing the impact of stm32 clock control heterogeneity in
other drivers.
Change-Id: Id15a8d0d44f03809b2907ef10d6877700459e674
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Telnet "Interpret As Command" (IAC) code is ignored.
Change-Id: I882397389d77b8adfcbce62fbd9654c0b0412ae3
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Let's use the generic console input type now. This will be useful for
other console input drivers such as telnet.
Change-Id: I787a1e9d86481d5f8c4803453726d9042a89dea4
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Input line length can be modified via Kconfig.
Change-Id: I3423fce9814e04b11d11e5d391f85fe1efbe8d17
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that we have a more generic mcux spi driver that can be used across
multiple Kinetis SoCs, remove the specific k64 spi driver.
Jira: ZEP-1374
Change-Id: Ifc324374f305837f5e3d2cfd7ad30d3608865b5b
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The k20_sim.h used by the PWM driver has some defines that also exist in
the MCUX HAL. Lets pickup the values from the HAL and drop the one's
that are in k20_sim.h. Also, they aren't used by anything at this
point.
Change-Id: Iaed4e8e5cec7d57a5ce9e89480cecfb7dc90a5e6
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Properly document the various APIs exposed by hci_driver.h.
Change-Id: Ic8daba4956e4c5d2cc6597556b55ab5221495ad7
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There are no users of this API and no (currently) envisioned use cases
for it. Remove it for now - it can always be brought back later if
there's a need for it.
Change-Id: I6530e096e3671c844a3f7dea8856147ffc716d71
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Since callers of bt_recv() have so far anyway been required to know in
which context to call it (based on e.g. bt_hci_evt_is_prio) it's
cleaner to have two separate APIs: bt_recv and bt_recv_prio.
Change-Id: Icd0d9aed9c51ffd2def31432c4ffcc16a9f13ccd
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add support for using the context bt_recv() is called in as the RX
thread, rather than having a separate host-side RX thread.
Change-Id: I256bfe5dece5272c816f2292e58747553189963d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The buf.h header file is a more natural place for these than the
hci_driver.h file.
Change-Id: I1eedcf03ae6ffa374403b382ec665ae554d6847b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Not all users are in an ISR context where we can't block, so give the
callers the freedom to choose if they want to block or not.
Jira: ZEP-1481
Change-Id: I19bd7e2df94c4eeb60886a17a78f872bd7bea887
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When going into DEEP_SLEEP state, the ARC timer
needs to be restored.
This implements the function to restore the timer
after sleep.
As the time spent during sleep is not currently known,
the timer is expired to reschedule the application task.
Jira: ZEP-1224
Change-Id: I22a30d0fd79f177cf166b9a29dc78d68f7d7fbad
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
