Many chips have only one serial port. When the serial port is occupied
by other devices, there is a lack of a console to output debugging
information. Semihosting can provide a console. The disadvantage of
semihosting is that a debugger must be connected, so it can only be
used for online debugging.
Signed-off-by: ZhongYao Luo <LuoZhongYao@gmail.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Instead of global workqueue, use own one so that the users of this
driver can more conveniently use global one. This means GSM modem
can work better with the UART muxing driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Create support for muxed UARTs which are attached to a real
UART and which use GSM 07.10 muxing protocol to create virtual
channels that can be run on top of the real UART.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add support to GSM 07.10 muxing protocol which is used to
share the same UART for PPP and AT commands among other things.
This allows e.g., the modem to send SMS and have PPP connection
active at the same time.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
CONSOLE_HANDLER was unconditionally selecting UART_INTERRUPT_DRIVEN (and
depends on it in the code), but UART_INTERRUPT_DRIVEN depends on
SERIAL && SERIAL_SUPPORT_INTERRUPT.
Add a SERIAL_SUPPORT_INTERRUPT dependency to CONSOLE_HANDLER.
CONSOLE_HANDLER already depends on UART_CONSOLE, which depends on
SERIAL, so a SERIAL dependency does not need to be added.
This avoids some selects with unsatisfied dependencies in CI.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Clean up space errors and use a consistent style throughout the Kconfig
files. This makes reading the Kconfig files more distraction-free, helps
with grepping, and encourages the same style getting copied around
everywhere (meaning another pass hopefully won't be needed).
Go for the most common style:
- Indent properties with a single tab, including for choices.
Properties on choices work exactly the same syntactically as
properties on symbols, so not sure how the no-indentation thing
happened.
- Indent help texts with a tab followed by two spaces
- Put a space between 'config' and the symbol name, not a tab. This
also helps when grepping for definitions.
- Do '# A comment' instead of '#A comment'
I tweaked Kconfiglib a bit to find most of the stuff.
Some help texts were reflowed to 79 columns with 'gq' in Vim as well,
though not all, because I was afraid I'd accidentally mess up
formatting.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Unused since commit 140a8d0c8a ("console: Remove deprecated function
console_register_line_input").
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Convert how we get the various chosen properties like "zephyr,console"
to use the new kconfig functions like dt_chosen_to_label.
Because of how kconfig parses things we define a set of variables of the
form DT_CHOSEN_Z_<PROP> since comma's are parsed as field seperators in
macros.
This conversion allows us to remove code in gen_defines.py for the
following chosen properties:
zephyr,console
zephyr,shell-uart
zephyr,bt-uart
zephyr,uart-pipe
zephyr,bt-mon-uart
zephyr,uart-mcumgr
zephyr,bt-c2h-uart
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
It does make sense to initialize USB console after USB Device stack.
Note that the value is selected only if we specify USB_UART_CONSOLE
in prj.conf, not in menuconfig afterwards.
Fixes#16518
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Allow user to set log level for UART console drivers. Add
log level option to UART pipe driver in order to see what it
is sending and receiving.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Appears within an 'if UART_MCUMGR'.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Console subsystem doesn't depend on older consoles-in-drivers, the
only common thing between them is CONFIG_UART_CONSOLE_ON_DEV_NAME
setting, so make it so (by depending on either UART_CONSOLE or
CONSOLE_SUBSYS.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Replace generating CONFIG_ symbols with DT_ symbols for chosen
properties like 'zephyr,console' or 'zephyr,bt-mon-uart'. We now use a
kconfigfunctions (dt_str_val) to extract the info from dts into Kconfig.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Remove all references in the documentation and Kconfig options
to the legacy shell to avoid confusing users and developers
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
The USB_UART_CONSOLE option itself is not enough to enable console on
the USB UART port. Most of the code is actually shared with
UART_CONSOLE, so this symbol has to be selected.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This option allows to explicitly include Segger RTT libraries and
enables use of it for various subsystems. It is disabled by
default as it consumes more RAM.
Signed-off-by: Pavel Kral <pavel.kral@omsquare.com>
Added a new UART driver for posix arch boards.
The driver can be configured to either attach to a new
pseudo-terminal, or to connect to the invoking shell
stdin-out.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Consistently use
config FOO
bool/int/hex/string "Prompt text"
instead of
config FOO
bool/int/hex/string
prompt "Prompt text"
(...and a bunch of other variations that e.g. swapped the order of the
type and the 'prompt', or put other properties between them).
The shorthand is fully equivalent to using 'prompt'. It saves lines and
avoids tricking people into thinking there is some semantic difference.
Most of the grunt work was done by a modified version of
https://unix.stackexchange.com/questions/26284/how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some
of the rarer variations had to be converted manually.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
In order to avoid bytes dropping when RTT output buffer is full,
RTT session detection algorithm is introduced to the RTT console.
If host session is detected console retries after wait state
expecting host to empty the buffer. If host session is not detected
console drops the byte without retrying.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add console driver that allows console session to be transferred
over a websocket connection.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
NATIVE_POSIX_STDIN_CONSOLE and NATIVE_POSIX_STDOUT_CONSOLE have more
than one prompts, this will cause warnings when run kconfig checks.
Remove one of two prompts.
Signed-off-by: Ding Tao <miyatsu@qq.com>
Now the native console driver also handles stdin
so we can drive the shell from the command line,
a pipe or a file
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Of these, only struct net_ipv6_nbr_data::send_ns is a descriptive
change:
send_ns is used for timing Neighbor Solicitations in general, not
just for DAD.
The rest are typo/grammar fixes.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
patch uses chosen property zephyr,bt-uart, zephyr,uart-pipe
and zephyr,bt-mon-uart to determine the uart instance to be
used for bluetooth,uart_pipe and bluetooth_monitor and generate
appropriate configs.
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
We can use the chosen property "zephyr,console" to determine what uart
should be used as the console and find its name to generate a define for
CONFIG_UART_CONSOLE_ON_DEV_NAME.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Input line length can be modified via Kconfig.
Change-Id: I3423fce9814e04b11d11e5d391f85fe1efbe8d17
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Telnet is started as an application, as it requires the net stack to be
ready. It will listen to any IP address on both protocols (IPv4, IPv6),
depending of course on which one is enabled.
Current behavior is very basic, as it does not handle any telnet
command (IAC). These will be silently ignored.
Jira: ZEP-1601
Change-Id: Id50656f23e6347bbbc893416953f1ba7116ef87d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This moves the shell component into its own subsys and groups all
related files and options into a single place.
Additionally, one Kconfig option will now be required to enable the
shell:
CONFIG_CONSOLE_SHELL=y
The header files was also moved to include/shell/shell.h and can be now
referenced with
#include <shell/shell.h>
instead of
#include <misc/shell.h>
Updated documentation as well.
Change-Id: Iffbba4acfa05408055e9fd28dffa213451351f94
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The Real Time Terminal functionality of the Segger J-Link
debug probe and software suite allows applications to write
to a certain RAM area that is read in real-time by the
debugger. This is specially useful when a UART is not
available to provide a console.
This commit adds a console driver that outputs over an RTT
"connection".
Change-Id: Ifce8020060e9f519a61f3f1fbe9f56f98da2ef7f
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add support for console output via the USB UART.
Note that console input via the USB UART doesnt work.
Adds a simulated poll method for UART interface exposed by USB.
Jira : ZEP-775
Change-Id: I357827ea52c027eb000baed80225f422df1f3358
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Convert leading whitespace into tabs in Kconfig files. Also replaced
double spaces between config and <prompt>.
Change-Id: I341c718ecf4143529b477c239bbde88e18f37062
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
A debug server might want to redirect outgoing characters on the console
to another output if it piggybacks on the serial line normally reserved
for the console.
Change-Id: I534f5b35456306940a3926f52fe5cce2d5c94da4
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
