The generic SPI GPIO chip select support now respects devicetree flags
for signal active level. Update all cs-gpios properties to specify
active low.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Allow feed operations that would stall due to internal peripheral
delays to complete immediately with -EAGAIN indicating that the feed
did not occur as expected.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Add the coding guidelines agreed upon by the project TSC with a
description of the staged approach needed to implement them
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We deprecated a number of aspects of the DTS binding syntax in Zephyr
2.1. Remove the support for the deprecated syntax. Remove from docs
about the deprecated syntax as well.
Removed reference in release-notes-2.1.rst to legacy_binding_syntax
since that anchor doesn't exist anymore.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Security documentation contains a code guideline section that is more
about security principles than code guidelines itself. Just removing
the mention do code guideline to avoid possible confusions with
upcoming project code guideline based on MISRA-C.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add release notes for updated HCI driver event handling for calling the
bt_recv() and bt_recv_prio() functions when delivering HCI events to
the host.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add a link to the page describing our development
processes, as it contains the description of how
to identify issues and pull requests as stale.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add a small section, clarifying the policies around modifying
contributions submitted by other developers.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add a small paragraph in the Contribution Guidelines
documentation to stress that cherry-picking of patches
into other pull requests is an allowed practive. Add a
link to additional documentation clarifying policies
around modifying patches of other developers.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
I received feedback that setting e.g. BOARD_ROOT in CMakeLists.txt is
not quite well specified; in particular, it's important to do so
before pulling in the boilerplate via find_package(). Clear that up.
Reported-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Device objects in Zephyr are currently placed into an array by linker
scripts, making it easy to iterate over all devices if the array
address and size can be obtained. This has applications in device
power management, but the existing API for this was available only
when that feature was enabled. It also uses a signed type to hold the
device count.
Provide a new API that is generally available, but marked as internal
since normally applications should not iterate over all devices. Mark
the PM API approach deprecated.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
DEVICE_AND_API_INIT and DEVICE_DEFINE are identical except that
DEVICE_DEFINE adds a parameter providing the device pm control
function, while DEVICE_AND_API_INIT does not. This requires duplicate
implementations where if CONFIG_DEVICE_POWER_MANAGEMENT is enabled
then DEVICE_AND_API_INIT delegates to DEVICE_DEFINE with a dummy pm
control function, and if it is not enabled then DEVICE_DEFINE discards
the parameter and delegates to DEVICE_AND_API_INIT.
DEVICE_INIT is like DEVICE_AND_API_INIT but doesn't provide an API.
Clean this up by refactoring so that DEVICE_DEFINE is the core
implementation, providing with and without device power management
right next to each other where they can be compared and maintained.
Redefine DEVICE_INIT and DEVICE_AND_API_INIT delegate to
DEVICE_DEFINE.
Also remove duplicate code by extracting the variations due to
enabling device power management into macros.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This add a new option `--no-index-modules` which works similarly to
`--modules` but does not generated index pages, only retains the
tweaking of how paths are displayed on symbol information pages,
showing '<title>/path/within/module/Kconfig' for paths that fall
within modules.
This is required by NCS, where there are more "modules" which we don't
want to have indexes for.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
Since this is an experimental API and MACRO_MAP() was deprecated in
favor of FOR_EACH() in zephyr v2.3.0, we are within our rights to just
remove it without notice now. Do so and mention it in the release
notes.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This file contains definitions for macros which are integral to
significant Zephyr use cases, such as CONTAINER_OF() and various
macros used by devicetree.h internally.
As such, in practice we expect at least advanced (if not intermediate)
users to understand it, so the fact that it's not formally documented
as an API with a stability level is a problem.
Fix that by giving the docstrings a once-over and adding new ones
where they are missing. Move all the remaining non-API macros to
util_internal.h.
Add a Sphinx API page for this header, and include it in the API
overview at "experimental" stability level.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Added CONFIG_UART_ASYNC_API to enable documentation generation for
asynchronous API.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
It was not clear that hexdump messages does not support prepending
with function name. Added clarification.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The driver API should be assigned at the time the device is defined.
Assigning in the init function is redundant and prevents moving the
pointer to a immutable driver structure.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Now there's an audio reference section move the i2s docs there
as the audio section is a better fit.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
The probe_id keyword was added to support overriding the inferred id
when determining the board-id to use when flashing. Document the
keyword.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Prior to addition of schema validation running sanitycheck
--generate-hw-map would preserve the value of any field in an existing
map that it didn't update. These fields now cause a parsing error.
Add notes as an optional key where information relevant to the board
can be added to provide useful context (such as which serial port
corresponds to the console, or why a non-standard runner is required).
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Recommend that Kconfig symbols related to deprecated features use
'DEPRECATED' in the symbol name instead of 'LEGACY'.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit updates the Zephyr documentation with changes introduced
by Zephyr CMake package.
It removes 'zephyr-env.sh/cmd' where no longer needed, and updates
boilerplate inclusion to find_package.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
These CVEs have been released from embargo. Include details in the v2.3
release notes, and in the vulnerabilities document.
Signed-off-by: David Brown <david.brown@linaro.org>
