Remove an unnecessary local variable to store the
return value, instead return directly thereby saving
few bits of memory.
Found using Coccinelle.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Remove an unnecessary local variable to store the
return value, instead return directly thereby saving
few bits of memory.
Found using Coccinelle.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
net_udp_get_hdr() function returns NULL on failure. Therefore
handle its return value to avoid potential NULL dereference.
Fixes#11485
Coverity-CID: 189738
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
The _net_app_sprint_ipaddr() was calling log_strdup() when
creating the debug print string. This is not correct as
the log_strdup() can only be used when calling the logging macro
to print strings.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Implements setsockopt() for the socket offload driver
to process the TLS tags sent in via the Zephyr setsockopt() API,
when CONFIG_NET_SOCKETS_SOCKOPT_TLS is chosen.
For each tag, the credential filenames are retrieved and
set via SimpleLink's sl_SetSockOpt() API.
Also, creates a new KConfig option for TLS_CREDENTIAL_FILENAMES.
This new option is used by apps/protocols to add TLS credentials
via filenames referring to the actual content stored on a secure
file system or flash.
Handles the IPPROTO_TLS_* socket protocol families in the
socket() offloaded API.
This was validated on the cc3220sf_launchxl with the http_get sockets
sample, with the globalsign_r2.der file loaded to secure flash via
the TI Uniflash tool, and using the TI Catalog of known good
root CA's.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Two separate folders and Kconfig options causing confusion on
CoAP and CoAP_SOCK implementations. This patch simplifies it.
Current CoAP Kconfig option moved to COAP_NET_PKT.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When resending data, we need to always check pending status first.
If the pending check returns an "expired" status, avoid sending the
data to L2 network driver entirely.
This change fixes a use after free issue, where the L2 network driver
was still handling a packet that was expired out from under it when
the pending status was checked.
Signed-off-by: Michael Scott <mike@foundries.io>
During firmware transmit timeout, we rely on the pending packet data to
reconstitute the token and token length. At this point the pending
structure may be cleared out due to multiple retries. To avoid getting
a zero token, let's use the token data from the original msg structure
instead.
Signed-off-by: Michael Scott <mike@foundries.io>
We are using msg->cpkt.pkt as the net_pkt pointer in the call to
net_app_send_pkt(). Let's keep the code clean and not expose
ourselves to "out of order" issues, by also using msg->cpkt.pkt
in the error handling unref call.
Signed-off-by: Michael Scott <mike@foundries.io>
During the retransmit cycle we take ref on the outgoing packet,
only to immediately unref it. Originally, this was to make sure
the net_context handling didn't get rid of the packet when
sendto() is called. But after checking, the ref counter is never
in danger of going to 0 at this point in the code, so the
added ref handling is useless.
Signed-off-by: Michael Scott <mike@foundries.io>
Add some extra space to the color resource buffer, to allow more
exotic and application-specific color spaces.
Signed-off-by: Marti Bolivar <marti@foundries.io>
File descriptor I freed automagically when using POSIX subsystem's
close() function, but any subsys-adhoc functions like zsock_close()
should do that explicitly.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Add new, socket based MQTT implementation, based on MQTT from Nordic
nRF5 SDK, introducing the following features:
* transport independent MQTT logic, with support for multiple transports
* support for multiple MQTT versions (3.1.0 and 3.1.1 supported)
* single event handler - no need to keep callback array in RAM
* automatic send of Ping Requests, for connection keep-alive
* message/event parameters wrapped into strucutres - easier extension
for future MQTT versions
* no separate thread needed to run MQTT - application only needs to call
mqtt_input and mqtt_live periodically
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Rename existing headers and sybols to mqtt_legacy, to allow new
implementation to keep old config and header names.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
With FD table introduction, net_context can no longer be reached by
typecasting socket descriptor. Instead, file descriptor API have to be
used.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
ztls_setsockopt and ztls_getsockopt returned error codes instead of
setting errno in particular cases. This commit fixes it.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
These changes were obtained by running a script created by
Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following
specification:
1. Read the contents of all dts_fixup.h files in Zephyr
2. Check the left-hand side of the #define macros (i.e. the X in
#define X Y)
3. Check if that name is also the name of a Kconfig option
3.a If it is, then do nothing
3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it
has neither of these two prefixes
4. Replace the use of the changed #define in the code itself
(.c, .h, .ld)
Additionally, some tweaks had to be added to this script to catch some
of the macros used in the code in a parameterized form, e.g.:
- CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS
- CONFIG_UART_##idx##_TX_PIN
- I2C_SBCON_##_num##_BASE_ADDR
and to prevent adding DT_ prefix to the following symbols:
- FLASH_START
- FLASH_SIZE
- SRAM_START
- SRAM_SIZE
- _ROM_ADDR
- _ROM_SIZE
- _RAM_ADDR
- _RAM_SIZE
which are surprisingly also defined in some dts_fixup.h files.
Finally, some manual corrections had to be done as well:
- name##_IRQ -> DT_##name##_IRQ in uart_stm32.c
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Couple of findings which were revealed after changing
LOG_MODULE_REGISTER macro:
- missing semicolons after LOG_MODULE_REGISTER()
- missing LOG_LEVEL defines
- other
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
FD method tables contain function pointers, and thus should be
const and reside in ROM. This patch fixes all cases of FD vtable
definitions: for POSIX FS API and for sockets.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Previously the "socket file descriptors" were just net_context
pointers cast to int. For full POSIX compatibility and support
of generic operations line read/write/close/fcntl/ioctl, the
real file descriptors should be supported, as implemented by
fdtable mini-subsys.
Socket implementation already has userspace vs flatspace dichotomy,
and adding to that ptr-fds vs real-fds dichotomy (4 possible cases)
is just too cumbersome. So, switch sockets to real fd's regardless
if full POSIX subsystem is enabled or not.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Unify the function naming for various network checking functions.
For example:
net_is_ipv6_addr_loopback() -> net_ipv6_is_addr_loopback()
net_is_my_ipv6_maddr() -> net_ipv6_is_my_maddr()
etc.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fixes following warning:
...
subsys/net/lib/dns/llmnr_responder.c:24:0:
subsys/net/lib/dns/llmnr_responder.c: In function ‘recv_cb’:
include/net/net_pkt.h:1203:9: warning: ‘addr’ may be used uninitialized
in this function [-Wmaybe-uninitialized]
return net_pkt_append(pkt, len, data, timeout) == len;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
subsys/net/lib/dns/llmnr_responder.c:306:14: note: ‘addr’ was declared
here
const u8_t *addr;
^~~~
...
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fixes warning:
warning: ‘ipv6’ defined but not used [-Wunused-variable]
static struct net_context *ipv6;
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
CoAP library is migrated to support over socket based
applications or other higher layer protocols. Most of the
API's and functionality is kept as it is except few changes.
net_pkt/net_buf is removed from CoAP library. Now it expects
a pre-allocated flat buffer and length. If there is not enough
space to append any data, library simply returns an error.
It's user's responsibility to allocate and free memory.
One change in functionality is, earlier coap_pending_clear()
used to clear the memory, but now it's user's responsibility
to free the memory.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Current TLS socket implementation assumed that PSK ID stored in
credential manager is NULL terminated. It's actually better to store
only the string content, as the string length is stored as well. This
approach is less confusing, when a user is not operating on C strings
but on a non-NULL terminated byte array.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When DBG level for CONFIG_LWM2M_LOG_LEVEL is disabled, a compiler
warning is generated:
In file included from include/logging/log.h:11:0,
from subsys/net/lib/lwm2m/lwm2m_engine.c:28:
subsys/net/lib/lwm2m/lwm2m_engine.c: In function ‘engine_add_observer’:
subsys/net/lib/lwm2m/lwm2m_engine.c:558:3: warning: implicit
declaration of function ‘sprint_token’
[-Wimplicit-function-declaration]
sprint_token(token, tkl), lwm2m_sprint_ip_addr(addr));
^
Let's remove the #if guards around sprint_token() and let
the Linker remove it when not needed.
Signed-off-by: Michael Scott <mike@foundries.io>
Make sure that we define and declare the _net_app_register() and
_net_app_unregister() functions properly if net_app logging level
is set to debug.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This flag is an indication to the timer driver that the OS doesn't
care about rollover conditions of the tick count while idling, so the
system doesn't need to wake up once per counter flip[1]. Obviously in
that circumstance values returned from k_uptime_get_32() are going to
be wrong, so the implementation had an assert to check for misuse.
But no one understood that from the docs, so the only place these APIs
were used in practice were as "guards" around code that needed to call
k_uptime_get_32(), even though that's 100% wrong per docs!
Clarify the docs. Remove the incorrect guards. Change the flag to
initialize to true so that uptime isn't broken-by-default in tickless
mode. Also move the implemenations of the functions out of the
header, as there's no good reason for these to need to be inlined.
[1] Which can be significant. A 100MHz ARM using the 24 bit SysTick
counter rolls over at about 6 Hz, and if it had to come out of
idle at that rate it would be a significant power issue that would
swamp the gains from tickless. Obviously systems with slow
counters like nRF or 64 bit ones like RISC-V or x86's TSC aren't
as affected.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Also, defines one LOG_MODULE_NAME for the simplelink WiFi driver, and
uses the same name for all files in this driver (module).
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Placing it at sys/fcntl.h was due to mimicking internal newlib's
layout, but what we need is this file at the standard location,
for reuse.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This commit fixes the issue that if a thread is waiting on recv for
data and the user closes the socket, the waiting thread is not
unblocked.
Signed-off-by: Léonard Bise <leonard.bise@gmail.com>
Adding spaces around "=" when definining Kconfig template so
that is more consistent with overall style of these template
variables.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the debugging print calls are async, all the strings that might
be overwritten must use log_strdup() which will create a copy
of the printable string.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The code was trying to print peer IP address string but that
pointer could contain garbage. There is actually no need to print
anything in this case, the error code return is enough.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In coap_option_value_to_int function, when coap option length is 4,
option->value[3] should be shifted by 0 rather than option->value[2].
This doesn't affect the behavior of function but needs to be fixed.
In coap_append_option_int function, when the value is between 0xffff
and 0xffffff(when option length is 3), bit shift operation is wrong.
For example, if the value is 0xABCDEF, by sys_put_be16(val, data)
data[0]=0xCD, data[1]=0xEF, by val >> 16, data[2]=0xAB. So the result
becomes 0xCDEFAB not 0xABCDEF. So, to sys_put_be16 function hand
&data[1] over instead of handing data over and val >> 16 needs to be
set to data[0], not data[2].
Signed-off-by: Taehwa Kang <hegrecomm@gmail.com>
New shell implementation is on the way. For now old one and all
references are kept to be gradually replaced by new shell.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
There is now a proper function to select the right source IPv4
address when sending a mDNS packet so use it instead of selecting
the address directly from network interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When no certificate-based ciphersuites are used, mbedTLS compiles out
hostname field and associated functions from its SSL context. This
resulted in compilation error when only PSK-based ciphersuites were
configured.
This commit resolves the issue by compiling-out hostname-related code
from secure sockets implementation on the same basis as mbedTLS does.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The return of memset is never checked. This patch explicitly ignore
the return to avoid MISRA-C violations.
The only directory excluded directory was ext/* since it contains
only imported code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The result of both printk and vprintk are not used in any place.
MISRA-C says that the return of every non void function must be
checked.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
sockets_tls subsystem uses entropy driver, yet it does not include
entropy header. This commit fixes this.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This patch enables BSD socket offload to a dedicated
TCP/IP offload engine.
This provides a simpler, more direct mechanism than going
through NET_OFFLOAD (zsock -> net_context -> socket conversions)
for those devices which provide complete TCP/IP offload at the
BSD socket level, and whose use cases do not require
IP routing between multiple network interfaces.
To use, configure CONFIG_NET_SOCKETS_OFFLOAD=y, and register
socket_offload_ops with this module.
Fixes#3706
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Using sizeof() is a common best practice in C, because it allows to
adjust size in one place instead of many.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
For ease of maintenance, let's swap the reader/writer initialization
syntax to:
.put_begin = put_begin,
.put_end = put_end,
...
This way we only assign used fields and adding new ones later is
less error prone.
Signed-off-by: Michael Scott <mike@foundries.io>
We set "insert" to true when the value is already in the buffer, but
we need to insert a TLV to denote things like RESOURCE_INSTANCE or
OBJECT_INSTANCE. In this case, let's not re-add the value.
Signed-off-by: Michael Scott <mike@foundries.io>
Let's implement put_begin/end_oi functions in the TLV formatter
so to mark the boundry of an object instance when more than 1
object instance is returned.
Fixes https://github.com/zephyrproject-rtos/zephyr/issues/9470
Signed-off-by: Michael Scott <mike@foundries.io>
In order to re-use the put_begin_ri / put_end_ri logic, let's create
generic functions for them: put_begin_tlv and put_end_tlv
Signed-off-by: Michael Scott <mike@foundries.io>
Currently, we only save the resource id of the incoming path setting.
In the future, we will need to change other values in order to process
multi-instance READ operations.
Let's save and restore the entire path only at the beginning and end
of processing.
Signed-off-by: Michael Scott <mike@foundries.io>
Data formatters may need to process data at the beginning and end of
each object instance and/or resource. Currently, they can only add
processing at the beginning and end of resource instances.
Let's establish put_begin/end_oi (object instance) and put_begin/end_r
(resource) API functions that data formatters can use for this purpose.
Signed-off-by: Michael Scott <mike@foundries.io>
Optimize the resource processing loop to avoid extra
assignments before checking if we need to process the
actual resource.
Signed-off-by: Michael Scott <mike@foundries.io>
When reading multiple instances, the base name value should not
include an object instance id. The object instance id is added
to the individual resource name values.
Accomplish this by saving the original path level and adjusting
the (base) name where needed.
Signed-off-by: Michael Scott <mike@foundries.io>
The put_begin / put_end calls are to be used at the very beginning
and end of processing a READ op. Let's correct that logic.
Signed-off-by: Michael Scott <mike@foundries.io>
Now that formatters use their own private data to hold state,
let's remove the old member variables from lwm2m_output_context
which are now unused.
Signed-off-by: Michael Scott <mike@foundries.io>
Data formatters have various private state variables which are
currently located in the output context structure. Let's add
a place where data formatters can store a pointer to their
private data so that as we add more formatters the output
context doesn't get cluttered up.
Signed-off-by: Michael Scott <mike@foundries.io>
The plain-text format only supports READ op for a specific resource.
In all other cases return NOT_ALLOWED.
Signed-off-by: Michael Scott <mike@foundries.io>
Data formatters are becoming too complex for a simple do_read_op()
function to handle all in one place. Also, more data formatters are
going to be added for LwM2M v1.1 support in the future.
In order for data formatters to perform internal setup or deny
invalid requests (specific to the formatter's logic), let's
establish do_read_op_* functions in each formatter.
Once the internal processing is done, they can call back into the
more generic lwm2m_perform_read_op function.
Signed-off-by: Michael Scott <mike@foundries.io>
Let's correct the starting logic in do_read_op() to not assume
a default value of 0 will be present for the first object, when
reading multiple objects.
Signed-off-by: Michael Scott <mike@foundries.io>
The object instance list isn't sorted by object instance id. Let's
simplify this and fix the logic in lwm2m_next_engine_obj_inst() to make
sure that we always get the NEXT object instance by value of
obj_inst_id, not just the next object instance in the list.
NOTE: This change removes the "last" object instance pointer from the
parameters of lwm2m_next_engine_obj_inst(). Some of the logic to return
a NULL value for the end of the list has to be moved back into
do_read_op().
Signed-off-by: Michael Scott <mike@foundries.io>
Remove over-complicated match_type logic in do_read_op(). Replace
MATCH_* checks with actual path->level values.
Signed-off-by: Michael Scott <mike@foundries.io>
This is similar to change which was done in 21f31e90ec, unfortunately
this case was missed.
Fixes: #9032
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The peers were not informed about DTLS connection close because
we removed DTLS context. The fix is to notify peers before we
remove the DTLS connection.
Fixes#8605
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When processing an observe request we fail to check whether a
resource has the read permission set. Let's check and if it
doesn't return -EPERM.
NOTE: Also do diligence and return -ENOENT when an object field
cannot be found while looking for the permission.
Fixes https://github.com/zephyrproject-rtos/zephyr/issues/8286
Signed-off-by: Michael Scott <mike@foundries.io>
Due to a change in the company name, the LwM2M copyrights need
to be changed from "Open Source Foundries Limited" ->
"Foundries.io".
Signed-off-by: Michael Scott <mike@foundries.io>
The previous code "optimized" and called both net_context_accept()
and net_context_recv() blindly to reset the corresponding callbacks.
But this leads to "wrong state" logging if debugging is enabled, so
clean that up.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This commit contains several fixes for DTLS implementation, proposed in
a post-merge review of #9338.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Consistently use
config FOO
bool/int/hex/string "Prompt text"
instead of
config FOO
bool/int/hex/string
prompt "Prompt text"
(...and a bunch of other variations that e.g. swapped the order of the
type and the 'prompt', or put other properties between them).
The shorthand is fully equivalent to using 'prompt'. It saves lines and
avoids tricking people into thinking there is some semantic difference.
Most of the grunt work was done by a modified version of
https://unix.stackexchange.com/questions/26284/how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some
of the rarer variations had to be converted manually.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
There was one extra byte sent in last chunk which caused
this error to be printed by curl
* Illegal or missing hexadecimal sequence in chunked-encoding
* stopped the pause stream!
* Closing connection 0
curl: (56) Illegal or missing hexadecimal sequence in chunked-encoding
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of waiting forever for a network buffer, have a timeout
when allocating net_buf. This way we cannot left hanging for a
long time waiting for a buffer and possibly deadlock the system.
This commit adds checks to L2 and network support libraries.
Fixes#7571
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
There have a funtion mqtt_rx_unsuback defined but not used.
So add it into mqtt_parser and fix the missing case.
Fixes#8431
Signed-off-by: Xuan Ze <119524428@qq.com>
This finishes refactor of splitting off net_config library name from
net_app library, started in c60df1311, c89a06dbc. This commit makes
sure that Kconfig options are prefixed with CONFIG_NET_CONFIG_
instead of CONFIG_NET_APP_, and propagates these changes thru the
app configs in the tree.
Also, minor dependency, etc. tweaks are made.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Add system calls for the zsock implementations of socket,
close, bind, connect, listen, accept, sendto, recvfrom,
fcntl, poll, inet_pton, and getaddrinfo.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Originally EFAULT was used to indicate NULL pointer error in TLS option
set/get functions. EINVAL was suggested to be more apropriate error code
for this case, hence replace it.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Introduce non-blocking DTLS handshake, used during recv function call.
This prevents from blocking while waiting for initial handshake packet
on non-blocking sockets during receive.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Make TLS poll function verify if decrypted data is available after
socket has notified activity with POLLIN flag. This prevents from giving
false notifications in case data was received on socket but was consumed
by mbedTLS.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Specify timeout value for mbedtls_ssl_read function for DTLS servers.
Adding this can prevent TLS context lockup in case blocking recv is used
and peer has shut down DTLS connection without closing it gracefully.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add support for DTLS recv/recvfrom function.
For DTLS client, recv function requires to have an already established
DTLS connection.
For DTLS servers, this function will try to establish DTLS connection
before receiving data. In case that DTLS handshake fails, recv function
will silently retry.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add support for DTLS send/sendto function.
For DTLS clients, send function will try to establish DTLS connection
before sending data. If DTLS handshake fails, it will return an error.
For DTLS servers, send function requires to have DTLS connection already
established.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
DTLS handshake can return MBEDTLS_ERR_SSL_HELLO_VERIFY_REQUIRED, which
indicate that TLS session context should be reset.
Also, store information whether TLS connection has beed established.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add binary IO functions for DTLS connections.
dtls_rx function is more complex than it's TLS counterpart due to fact,
that DTLS does not allow blocking operation for this function. A simple
timeout mechanism was implmented basing on the zsock_poll function.
This function also verifies peer address. As currently only a single
DTLS connection is supported on a socket, if a DTLS connection is
established, and we receive datagram from different peer, it is silently
dropped.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Functions for checking flags set on sockets are needed by TLS sockets as
well, therefore extract them to a separate header file to avoid code
duplication.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add write-only socket option to set role for DTLS connection. This
option is irrelevant for TLS connections.
This options accepts and integer with a TLS role, compatible with
mbedTLS values:
0 - client,
1 - server.
By default, DTLS will assume client role.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Up until now, Zephyr has patched Kconfig to use the last 'default' with
a satisfied condition, instead of the first one. I'm not sure why the
patch was added (it predates Kconfiglib), but I suspect it's related to
Kconfig.defconfig files.
There are at least three problems with the patch:
1. It's inconsistent with how Kconfig works in other projects, which
might confuse newcomers.
2. Due to oversights, earlier 'range' properties are still preferred,
as well as earlier 'default' properties on choices.
In addition to being inconsistent, this makes it impossible to
override 'range' properties and choice 'default' properties if the
base definition of the symbol/choice already has 'range'/'default'
properties.
I've seen errors caused by the inconsistency, and I suspect there
are more.
3. A fork of Kconfiglib that adds the patch needs to be maintained.
Get rid of the patch and go back to standard Kconfig behavior, as
follows:
1. Include the Kconfig.defconfig files first instead of last in
Kconfig.zephyr.
2. Include boards/Kconfig and arch/<arch>/Kconfig first instead of
last in arch/Kconfig.
3. Include arch/<arch>/soc/*/Kconfig first instead of last in
arch/<arch>/Kconfig.
4. Swap a few other 'source's to preserve behavior for some scattered
symbols with multiple definitions.
Swap 'source's in some no-op cases too, where it might match the
intent.
5. Reverse the defaults on symbol definitions that have more than one
default.
Skip defaults that are mutually exclusive, e.g. where each default
has an 'if <some board>' condition. They are already safe.
6. Remove the prefer-later-defaults patch from Kconfiglib.
Testing was done with a Python script that lists all Kconfig
symbols/choices with multiple defaults, along with a whitelist of fixed
symbols. The script also verifies that there are no "unreachable"
defaults hidden by defaults without conditions
As an additional test, zephyr/.config was generated before and after the
change for several samples and checked to be identical (after sorting).
This commit includes some default-related cleanups as well:
- Simplify some symbol definitions, e.g. where a default has 'if FOO'
when the symbol already has 'depends on FOO'.
- Remove some redundant 'default ""' for string symbols. This is the
implicit default.
Piggyback fixes for swapped ranges on BT_L2CAP_RX_MTU and
BT_L2CAP_TX_MTU (caused by confusing inconsistency).
Piggyback some fixes for style nits too, e.g. unindented help texts.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The LwM2M engine will cleanup the net_app_ctx if there are
errors during initialization. The clean up calls here in
RD client are duplicated.
Signed-off-by: Michael Scott <mike@foundries.io>
If a disconnection callback was registered, it is not called
as the check done in net_app is reversed. The disconnection callback
is not called if there are any inactive contexts.
The check should be on any active context.
Signed-off-by: Philémon Jaermann <p.jaermann@gmail.com>
- Remove redundant 'n' defaults. 'n' is the default value for bool
symbols.
This makes the auto-generated documentation clearer as well: You get
"implicitly defaults to n" instead of
"- n if <propagated dependencies>".
- Shorten
<type>
prompt "foo"
to
<type> "foo"
This works for all types, not just bool.
- Various formatting nits.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add write only TLS secure option to set peer verification level for
TLS connection.
This option accepts an integer with a peer verification
level, compatible with mbedtls values (0 - none, 1 - optional, 2 -
required.
By default, socket mimics mebdTLS behavior - (none for server, required
for client).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add TLS secure socket option to read a ciphersuite chosen during TLS
handshake. Might be useful during development.
This is a read-only option that returns an integer containing an
IANA assigned ciphersuite identifier of chosen ciphersuite.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add TLS secure socket option that enables to narrow list of ciphersuites
available for TLS connection.
This option accepts an array of integers with IANA assigned ciphersuite
identifiers and returns such.
By default, every statically configured ciphersuite is available for a
socket and getsockopt returns an array of these.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add write-only TLS secure socket option to set hostname.
This option accepts a string containing the hostname. May be NULL, to
disable hostname verification.
By default, an empty string is set as a hostname for TLS clients,
to enforce hostname verification in mbedTLS.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add TLS secure socket option to select TLS credentials to use.
This option accepts and returns an array of sec_tag_t that indicate
which TLS credentials should be used with specific socket.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add TLS credential management subsystem that enables to register TLS
credentials in the system. Once specific credentials are registered in
the system, they will be available for TLS secure sockets to use.
To use a TLS credential with a socket, the following steps have to be
taken:
1. TLS credential has to be registered in a system-wide pool, using the
API provided in "net/tls_credentials.h" header file.
2. TLS credential (and other TLS parameters) should be set on a socket
using setsockopt().
Note, that there is no need to repeat step 1 for different sockets using
the same credentials. Once TLS credential is registered in the system,
it can be used with mulitple sockets, as long as it's not deleted.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Move struct members around in networking code so that we avoid
unnecessary holes inside structs. No functionality changes by
this commit.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
CONFIG_DNS_RESOLVER is the master switch for DNS resolution support,
for both native and socket APIs. Avoid confusing link errors by
compiling out both dns_resolve_name() and getaddrinfo() if that
option is not enabled.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Current implementation does not handle large extension headers
(e.g HBHO). Which resulted network stack crashes or due to
misinterpretation of lengths network packets are dropped. Also
caused issues while preparing IPv6 packet (e.g. large HBHO header
with IPv6 fragmentation support).
Issues fixed and provided more unit tests.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
During transfer of object data via OMA TLV format, we can
encounter resources which are optional or not handled in base
LwM2M engine. When these resources cannot be handled let's
read past them and continue on.
Signed-off-by: Michael Scott <mike@foundries.io>
Don't use hard-coded value of 4 for passing the # of options to
coap_find_options() in handle_request(). This can easily get
out of sync.
Signed-off-by: Michael Scott <mike@foundries.io>
LwM2M engine now supports optional resources that may need to be
setup or torn down in user-based code during object instance
creation / deletion.
Let's provide callbacks that can be used for this purpose.
Signed-off-by: Michael Scott <mike@foundries.io>
Let's rename lwm2m_engine_exec_cb_t to lwm2m_engine_user_cb_t so that
future user-code callbacks can make use of the same definition.
Signed-off-by: Michael Scott <mike@foundries.io>
Initial implementation of poll() was more of a proof of concept, so
was coded with a single-thread application in mind. As we move to
sockets as the main networking API, make it possible to use poll()
from different threads.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Implement socket poll function for TLS socket. In addition to regular
poll checks, we have to check if there is some decrypted data pending on
mbedTLS.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add entropy source for mbedTLS. If no entropy driver is available, use
non-secure, software entropy source.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add tls_context structure that stored data required by TLS socket
implementation. This structure is allocated from global pool during
socket creation and freed during socket closure.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add switch to a socket layer that will enable switching socket API to
TLS secure sockets. At this point there is no secure sockets
implementation, so secure socket calls redirect to regular socket calls.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Remove some 'default ""' properties on string symbols too.
Also make definitions more consistent by converting some
config FOO
<type>
prompt "foo"
definitions to a shorter form:
config FOO
<type> "foo"
This shorthand works for int/hex/string symbols too, not just for bool
symbols.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
If we use newlib the isdigit (and other similar functions) return an
error as char can possibly be viewed as signed:
usr/include/ctype.h:57:54: error: array subscript has type ‘char’ [-Werror=char-subscripts]
#define __ctype_lookup(__c) ((__ctype_ptr__+sizeof(""[__c]))[(int)(__c)])
Explicity cast to unsigned char so we deal with both this warning and
possible warning when -Wpointer-sign is enabled.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Split out definition of net_app_init() and its parameter flags from
net_app.h header to new net_config.h header. As we do this, rename
the function to net_config_init() and flags to NET_CONFIG_NEED_*.
This is a second step in splitting out network configuration API
out of net_app API, started in the c60df1311 commit.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This allows zephyr to listen LLMNR DNS queries sent by Windows
and respond to them. See RFC 4795 for details.
The feature requires that hostname is set properly to the
zephyr device and LLMNR is configured properly.
Typically following config options are enough for this support:
CONFIG_NET_HOSTNAME_ENABLE=y
CONFIG_NET_HOSTNAME="zephyr-device"
CONFIG_DNS_RESOLVER=y
CONFIG_LLMNR_RESPONDER=y
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This implements LLMNR client from RFC 4795. This means that caller
is able to resolve DNS resource records using multicast DNS.
The LLMNR is used in Windows networks.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Due to the fact that cmake doesn't allow to build empty "library"
(which would be the case when neither CONFIG_NET_APP_SERVER nor
CONFIG_NET_APP_CLIENT is defined).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
net_app library consisted of 2 disjoint parts: a) library to
setup/configure networking on the application startup; b) library
to setup client and server connections.
As the configuration library is universally useful and is a generic
Zephyr networking component, split it out to a seperate top-level
networking library under net/lib/config/.
Fixes: #7658
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
When the priority of the LwM2M engine was lowered, it causes an
occasional registration update to fall outside of the registration
lifetime. This shows up as the following error:
Failed with code 4.4. Retrying registration
Let's try and retry a bit earlier to account for the priority
change.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
The ARRAY_SIZE() utility macro will actually test the parameter types,
and ensure that it is only called with arrays, and not arrays decayed
to pointers.
Changes were performed with a simple Coccinelle script.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
A typo in update_attrs() was setting every observer to a PMIN of 0.
This meant we could send observer data as often as the process was
called. This is out of spec as the default minimum is 10 seconds.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
The LwM2M engine thread is used for various periodic triggers.
None of these are in a critical path that requires super sensitive
timing and the current K_PRIO_COOP(7) setting was causing the
Bluetooth RX thread to have to wait too long for certain actions
to complete.
Let's lower the priority to -1 (effectively) to eliminate these
conflicts.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Convert couple of MSEC() calls to K_MSEC() as the timeouts
when using MSEC() are just too long.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
During normal use, a CoAP packet can be resent due to network congestion
and other causes. During block transfer the LwM2M client checks to make
sure the block received is the one we expect and if not generates a
"duplicate" warning. When this happened, we were releasing the reply
handler and when the correct block was received the client would
generate a "No handler" error.
To avoid releasing the reply handler too early, let's set the coap_reply
"user_data" field to an error condition (1). Then, once the reply
processing is complete we can check the user_data field to be sure that
it's ok to release the reply handler.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
The code was using MSEC() macro in few places instead of more
proper K_MSEC(). The MSEC() takes seconds as a parameter and
K_MSEC() takes milliseconds.
Fixes#7657
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
sin6_scope_id is not set anywhere and not used. Probably left over
from old ZOAP library. Just address, port and family type are enough
to find registered CoAP observer.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The next error check is much more suitable to handle the error due to
the error message which lets the user know that something went wrong.
Fixes#7661.
Signed-off-by: Daniel Egger <daniel@eggers-club.de>
Current implementation hardcoded channel in received frame structure.
With this change channel can be retrieved from a OpenThread platform,
and put in the frame. In result procedures like Discovery can be
executed correctly. Change was tested with OpenThread Border Router.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit contains bugfix for Joiner eui-64 handling and setting radio
in correct mode after calling thread stop.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When designing the registration client for LwM2M, I understood
that the LwM2M Technical Specification allows for a multi-server
connection setup where the client makes several connections
to various LwM2M servers and allows each of them to manage
various aspects of the LwM2M client based on Access Controls.
However, the way I implemented it was not well thought out and
as we look forward to adding Bootstrap support, it needs a
do over.
Let's remove all of the code dedicated to handling multiple LwM2M
client connections. This will simplify and reduce the code size
of the registration client considerably.
Later, once Bootstrap support has been added, we can implement
multi-server connections in a cleaner manner.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
This allows a user to customize the port used for downloading
firmware via the pull method of the LwM2M client. It's default
value of 0 will select a random port during initialization.
NOTE: If set, this value should not be the same port as the
LWM2M_LOCAL_PORT setting.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Due to a bug where LWM2M_LOCAL_PORT was not being honored, all
outgoing traffic from the LwM2M client was coming from a random
port determined during initialization.
Now that this bug bas been fixed, let's default the client to the
behavior that most users are expecting, and let new users customize
the outgoing port if needed (which should be rarely).
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Currently, CONFIG_LWM2M_LOCAL_PORT is never used when setting up
the LwM2M client. Let's set the port of the local address using
CONFIG_LWM2M_LOCAL_PORT, so that the client can bind to it.
NOTE: A setting of 0 will use a random port.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Currently, the client_addr parameter is only used to check the
sa_family at various points during the init process. Both the
IP address and the port are ignored. Let's set the local client's
port based on the port value of the passed in client_addr if one
is supplied.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
The port parameter passed to _net_app_set_local_addr() is converted
from host byte-order to network byte-order. Here we are passing
a port value which has already been translated to network byte-order.
Let's translate the local port to host byte-order when passing it
to _net_app_set_local_addr() to fix this issue.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
L2 could take advantage of such hardware capability, when supported by
the device. This is also required for OpenThread.
Fixes#5714
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
We only clear 3 of the 6 member variables of the coap_reply structure
in coap_reply_clear().
Let's make sure to reset all of them.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
The base CoAP retry setting is quite fast for network technologies
such as LTE-M and LoRa. Let's add an option to delay retries
a bit longer depending on the need.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Using IPSO Smart Object Guideline: "Smart Objects Starter Pack 1.0"
dated May 27, 2017, let's mark the OPTIONAL resources for an
IPSO Temperature object (Section 10. "IPSO Object: Temperature").
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Using IPSO Smart Object Guideline: "Smart Objects Starter Pack 1.0"
dated May 27, 2017, let's mark the OPTIONAL resources for an
IPSO Light Control object (Section 16. "IPSO Object: Light Control")
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Using OMA Technical Specification LwM2M Enabler 1.0.2 dated
Feb. 9, 2018, let's mark the OPTIONAL resources for an LwM2M
Firmware Update object (Section E.6 "LwM2M Object: Firmware
Update")
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Using OMA Technical Specification LwM2M Enabler 1.0.2 dated
Feb. 9, 2018, let's mark the OPTIONAL resources for an LwM2M
Device object (Section E.4 "LwM2M Object: Device")
As a result, the Device object no longer configures the default
buffers for data storage of several optional resources.
The LwM2M client sample is also changed to to setup these read-only
buffers instead.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Using OMA Technical Specification LwM2M Enabler 1.0.2 dated
Feb. 9, 2018, let's mark the OPTIONAL resources for an LwM2M
Server object (Section E.1 "LwM2M Object: Server")
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Using OMA Technical Specification LwM2M Enabler 1.0.2 dated
Feb. 9, 2018, let's mark the OPTIONAL resources for an LwM2M
Security object (Section E.1 "LwM2M Object: Security")
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
This patch introduces several changes to support OPTIONAL resources.
The primary indicator for this behavior is to assign FLAG_OPTIONAL
to the object field's permission flags.
These resources are not setup by the LwM2M object code. They are
left up to the user-based code for initialization via the following
functions:
lwm2m_engine_set_res_data()
lwm2m_engine_get_res_data()
When assigning const-based data as a data buffer, user-based code can
also specify the following data flag: LWM2M_RES_DATA_FLAG_RO
The FLAG_OPTIONAL flag also affects the LwM2M engine in the following
ways:
- CREATE operations won't generate an error if optional resources are
not included.
- Object instance READ operations won't complain about missing
optional resources.
- In the future, BOOTSTRAP operations can have different handling
based on optional resources.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
In the future, we will have optional resources that may or may
not be assigned a buffer for data storage. When these resources
are queried we need to be able to return an error code if the
buffer isn't set.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Instead of selecting the first IPv4 address from the network
interface, use destination address to select the proper local IPv4
address.
Fixes#7500
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fix a build warning when compiling a net_app sample with
CONFIG_NET_APP_DTLS enabled by changing the print formatter from %zu
to %d. It references the var hdr_len which is defined as an int:
In file included from include/net/net_core.h:78:0,
from subsys/net/lib/app/net_app.c:27:
subsys/net/lib/app/net_app.c: In function ‘_net_app_ssl_mainloop’:
include/logging/sys_log.h:96:20: warning: format ‘%zu’ expects
...
subsys/net/lib/app/net_app.c:2132:6: note: in expansion of macro
‘NET_ERR’
NET_ERR("could not skip %zu bytes",
^~~~~~~
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
- Changed define for SETTINGS_CONFIG_PAGE_SIZE from a hard coded value
to reference build system generated FLASH_ERASE_BLOCK_SIZE. This value
comes from 'erase-block-size' found in the dtsi file of devices.
- Modified nrf52840.dtsi to include definition for 'erase-block-size'
Fixes#7107
Signed-off-by: David Leach <david.leach@nxp.com>
This removes some tricky math to calculate lengths and offsets,
ensuring that, when appending the WebSocket UUID to the handshake
key, the key_accept buffer won't overflow.
Coverity-ID: 183057
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Rewrite prepare_reply() to reduce unnecessary string copies and calls
to net_pkt_append_all(). Also reduces some of the tricky string length
calculations.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
In an effort to reduce the footprint of the LwM2M client, let's
lower the default # of observes handled by the client from 20 to
10.
This saves ~640 bytes of SRAM.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Remove "used" member from observe_node structure and replace by
checking the ctx for non-NULL value.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
The slist attr_list doesn't scale well when added to the LwM2M object,
object instance and resource instance structures. The goal of a
robust LwM2M client is to let the user create MANY object instances
and these will have many resource instances each. The amount of SRAM
taken up by the attr_lists will only increase over time, regardless
of the actual # of write attribute structures reserved via the
LWM2M_NUM_ATTR config setting.
Instead, let's remove the slist from these structures and add a
reference pointer to the lwm2m_attr structure. We can use this
reference to create the one to many relationship between the objects,
object instances and resource instances for a much smaller amount of
code and SRAM resources.
The sacrifice for these savings will be a larger # of iterations when
looking up assigned write attributes and matching them to their
references. However, due to the # of write attributes current being
handled, the # of iterations during this process is very manageable.
Example flash and SRAM savings when building for nrf52_blenano2:
Before patch:
Memory region Used Size Region Size %age Used
FLASH: 139532 B 512 KB 26.61%
SRAM: 36576 B 64 KB 55.81%
IDT_LIST: 148 B 2 KB 7.23%
After patch:
Memory region Used Size Region Size %age Used
FLASH: 139284 B 512 KB 26.57%
SRAM: 36000 B 64 KB 54.93%
IDT_LIST: 148 B 2 KB 7.23%
Summary: This patch saves ~248 bytes of flash and ~576 bytes of SRAM
for the typical configuration of LwM2M client in Zephyr.
NOTE: these values will vary by architecture.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
When any error is returned from update_attrs() in engine_add_observer()
an EINVAL is returned back to the caller. Let's return whatever error
code was generated in update_attrs() instead.
Also, add handling where previously errors were ignored.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
For code clarity, let's move notification_attrs structure to the top
of lwm2m_engine.c. While we're at it, we can re-order it's members
for memory alignment.
NOTE: This patch does not change the current flash or SRAM usage but
further additions to the notification_attrs structure could.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
The path member of the object instance and resource instance structures
can easily be removed to save several bytes per instance over the entire
LwM2M subsystem. So let's remove it.
Example savings when building for nrf52_blenano:
SRAM usage before patch: 37952 B
SRAM usage after patch: 36576 B
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Let's optimize the order of the following structures to account for
memory alignment:
lwm2m_engine_obj
lwm2m_engine_res_inst
lwm2m_output_context
lwm2m_output_context
Tested building for nrf52_blenano hardware:
SRAM usage before patch: 38240 B
SRAM usage after patch: 37952 B
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
It's highly unlikely that snprintk() will return a negative value, but
that's a possibility that will make the `pos` variable be set to a
value outside the boundaries of the statically allocated `buf` array.
Also clamp writes to ensure that the statically allocated buffer won't
be overwritten with a large token length.
Fixes#7070.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
In the future, when bootstrap support is added, this config won't
be used. Let's remove it.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Now that the LWM2M_OP_* bits have been renumbered, we no longer need
a custom BIT() macro for the LwM2M code. Let's remove it and use
BIT() instead.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Remove unused OP flag LWM2M_OP_NONE and renumber the existing flags
so that the operations used in object permissions land in the lowest
bits, and extended operations come later.
We may eventually add more permission / data flags, so let's try and
keep them inside a 1 byte boundary (flags with bits 0 to 7).
NOTE: LWM2M_OP_DELETE is currently not checked as a permission but
it may be in the future so it is in the lower bits.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
When a data pointer or data length is not set, the read and write
handlers should return ENOENT to generate the correct LwM2M error
code (COAP_RESPONSE_CODE_NOT_FOUND).
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Before ever call of string_to_path(), the lwm2m_obj_path object
was being cleared via memset. Let's move the memset into
string_to_path() to remove the duplicate code.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Eliminate several similar code-blocks by replacing
engine_get_resource() with a more useful function called:
path_to_objs()
By supplying an lwm2m_obj_path object, it will find and set
the related values for:
struct lwm2m_engine_obj_inst
struct lwm2m_engine_obj_field
struct lwm2m_engine_res_inst
NOTE: NULLs can be supplied where the returned value is not
important.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
If we have multiple network interface (like in VLAN), then we need
to select the proper local interface based on destination address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Without that, if ipv4 is configured via DHCPv4, server will not be
accessible. It looks like it won't properly bind addresses.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- Removed OT_PLAT_RADIO_DEVICE_NAME
- Changed OpenThread binding to use NET_AP_IEEE802154_DEV_NAME
- Modified Kconfig chain to ensure NET_AP_IEEE802154_DEV_NAME
is enabled for both native 802.15.4 and OpenThread configurations
- Changed default setting of NET_L2_IEEE802154 in defconfig for mkw41z4.
- Fixed OpenThread api support code to use the state of mIsCcaEnabled
in the transmit frame to conditionally invoke radio_api->cc() on
transmits.
Signed-off-by: David Leach <david.leach@nxp.com>
We returned too early when creating listeners which meant that
IPv4 listener was not created if IPv6 one was created successfully.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When dns_get_addr_info() returns an error it does not call the
resolve callback, and thus the semaphore will not be given.
This fix will avoid a deadlock situation for various errors.
Added some small tests for getaddrinfo().
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
Callers of dns_get_addr_info() depends on receiving an end-of-results
callback (where 'info' is NULL) when finished. Do this on failure in
cb_recv() instead of pointing to an empty object.
This fix will avoid a deadlock situation in getaddrinfo().
A reply code other than "no error" in the DNS response is a typical
case when the lookup failed and this occurs.
Moved "struct dns_addrinfo info" variable from cb_recv() to dns_read()
because it was now unused in cb_recv().
Adding tests for this requires network access and a DNS server,
or a mechanism for generating a DNS response with a reply code.
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
Do not lookup DNS AAAA entries if IPv6 is disabled. The result can not
be used anyway because "struct sockaddr" does not have enough space for
IPv6 address in that case.
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
Instead of always allocating both IPv6 and IPv4 address information
to every network interface, allow more fine grained address
configuration. So it is possible to have IPv6 or IPv4 only network
interfaces.
This commit introduces two new config options:
CONFIG_NET_IF_MAX_IPV4_COUNT and CONFIG_NET_IF_MAX_IPV6_COUNT
which tell how many IP address information structs are allocated
statically. At runtime when network interface is setup, it is then
possible to attach this IP address info struct to a specific
network interface. This can save considerable amount of memory
as the IP address information struct can be quite large (depends
on how many IP addresses user configures in the system).
Note that the value of CONFIG_NET_IF_MAX_IPV4_COUNT and
CONFIG_NET_IF_MAX_IPV6_COUNT should reflect the estimated number of
network interfaces in the system. So if if CONFIG_NET_IF_MAX_IPV6_COUNT
is set to 1 and there are two network interfaces that need IPv6
addresses, then the system will not be able to setup IPv6 addresses to
the second network interface in this case. This scenario might be
just fine if the second network interface is IPv4 only. The net_if.c
will print a warning during startup if mismatch about the counts and
the actual number of network interface is detected.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Move IP address settings from net_if to separate structs.
This is needed for VLAN support.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make the service parameter optional in getaddrinfo().
The application should be able to use NULL as service when only
interested in the host lookup.
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
Add support for MSG_DONTWAIT flag in send() and sendto(). This
aligns with the same flag used in recv() and recvfrom().
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
There was not enough space for \0 at the end of the string.
Coverity-CID: 183057
Coverity-CID: 183050
Fixes#6675Fixes#6682
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add support for MSG_PEEK flag in recv and recvfrom.
This flag is needed when using non-zephyr embedded applications with
Zephyr's socket API.
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
Add support for MSG_DONTWAIT flag in recv and recvfrom.
This flag is needed when using non-zephyr embedded applications with
Zephyr's socket API.
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
Instead of CONFIG_COAP_MBEDTLS_SSL_MAX_CONTENT_LEN, use recently
introduced CONFIG_MBEDTLS_SSL_MAX_CONTENT_LEN.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
We need to check the debug level to be INFO or higher, otherwise
the some of the variables in net app init.c will give unused
warning. Also the sys_log.h needs to be included _after_ we have
set the logging level, this is done by net_core.h so we should
not include the syslog header file here.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit creates a websocket library that can be used by
applications. The websocket library implements currently only
server role and it uses services provided by net-app API.
The library supports TLS if enabled in configuration file.
This also adds websocket calls to HTTP app server if websocket
connection is established.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Refactor recvfrom code for handling SOCK_DGRAM into zsock_recv_dgram
to align with SOCK_STREAM. Add flags parameter, will be used later.
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
We use ctx->user_data to hold socket flags. As each call to
net_context_recv() and net_context_send() overwrites its previous
value, we explicitly must pass the current ctx value there.
Without this, non-blocking socket was turned into blocking after
e.g. switching from receiving to sending.
Fixes: #6309
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If accept callback is called with error, don't treat the context
passed to the callback as a new accepted context.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
We pass normal 1-based mask, and mask invert it before logically
AND'ing with the value. This apparently a mix-up between how the
mask was intended to be passed initially and how it was in the end.
This issue actually didn't have an effect, because currently defined
flags have mutually exclusive lifetime (when "eof" flag is set,
"non-blocking" flag value is no longer import). Anyway, that's a
bug and needs fixing.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
net_app_ctx maintains multiple net contexts(net_ctx). But when http
api's wants to reply or send some data, its always choose the first
net_context in the array, which is not correct always.
net_app_get_net_pkt_with_dst() api will select proper context
based on destination address. So with the help of new api in
net_app, http can select proper context and send packets. To
achieve this, desination address is provided in http_recv_cb_t
and http_connect_cb_t callbacks. Also chaged relevant API's to
provide destination address in http message preparation methods.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Logic for sending chunks of data is incompatible with adding
Content-Length: header.
Per https://tools.ietf.org/html/rfc7230#section-3.3.1:
"A sender MUST NOT send a Content-Length header field in any
message that contains a Transfer-Encoding header field."
Going a bit further in my mind: also don't send Transfer-Encoded
chunked data either when the Content-Length header is present.
In general, there will be problems if the http client library
makes payload changes without the user code knowing about it.
This patch removes the use of http_send_chunk() from the new
HTTP client code and instead sends the payload directly to
http_prepare_and_send()
This fixes an issue where every available buffer would be allocated
with repeating payload data because the for loop in http_request()
wasn't ending until we ran out of memory.
NOTE: This patch was previously applied but was lost when
commit d1675bf3e6 ("net: http: Remove the old legacy API")
moved code around.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
In commit 9489fa54cc ("net: http: Fix http_prepare_and_send"),
the logic for when to call http_send_flush() was incorrect. This
is causing a call to http_send_flush() every time
http_prepare_and_send() is called.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
We should not use the user suppied timeout setting in
http_client_send_req() for the connection timeout. In the
previous API the call to tcp_connect() used
CONFIG_HTTP_CLIENT_NETWORK_TIMEOUT as the timeout setting.
Let's do that here too.
This fixes -ETIMEDOUT error generation when using K_NO_WAIT
for http_client_send_req().
NOTE: This patch was previously applied but was lost when
commit d1675bf3e6 ("net: http: Remove the old legacy API")
moved code around.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
In previous version of the HTTP API, commit 8ebaf29927 ("net: http:
dont timeout on HTTP requests w/o body") fixed handling of HTTP
responses without body content.
For the new API, let's add a specific fix for when PUT/POST requests
are responded to with just the status code.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Use ccache when building OpenThread. When the cache is warm, I was
able to observe that this patch sped up a clean build from 45 seconds
to 33 seconds.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Assertions should only be used to check invariants. Things that may
change value in runtime are better left to proper checks.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Assertions should only be used to check invariants. Things that may
change value in runtime are better left to proper checks.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
mbedTLS log level is obviously a mbedTLS config setting. It makes
sense to have it defined in mbedTLS Kconfig, and different parts
of Zephyr to reuse as needed (e.g. net-app vs upcoming TLS wrapper
for sockets).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
When IPv6 and IPv4 both are enabled and net_app acting as a client,
configuring local context has one glitch.
After selection of IPv6 context as a default context function
should return immediately, otherwise it continue to select IPv4
context as default context.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
In case of TCP and node acting as a APP_SERVER it can have multiple
concurrent connections. Calling close callback when there are still
active connections exists, causing an issue.
e.g. When a node acting as a HTTP server and can support multiple
TCP connections. Let's say one of the connection is in closing
state and the rest are still in active state. net_app_ctx is
calling close (http_closed) callback of registered upper layers.
HTTP assumes all the connections are closed and unref all the
connection related stuff.
Call the close callback only when there are no active connections.
Patch has also moved TCP stuff under one #ifdef.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Avoid using an uninitialized pointer when adding headers to the HTTP
context.
Coverity-CID: 178792
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
In net_app_init_client(), the remote port is set after an initial
set of checks based on the remote_addr's assigned family.
However, if the peer_addr_str is a host name which needs to be
resolved via DNS, the family won't be set yet, and the port is
left as 0.
To fix this behavior let's move the port assignment after the
DNS lookup section to be sure that the remote sa_family is set.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
RFC 7252, sec 4.8 [https://tools.ietf.org/html/rfc7252#section-4.8]
The default MAX_RETRANSMIT is 4, current implementation only
retry 3 times. Update next_timeout() to return one more retry.
Also, add a TODO for random generated initial ACK timeout
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
The existing implementation assumed DNS resolv callback will be
called just once, but that's not always the case (apparently,
for multi-homes hosts or something). So, apply array bounds
checking (and do pointer arithmetic only after it, as the C
standard otherwise warns of "undefined behavior"). In such a case,
the port number wasn't set in each entry too, so rework how it's
done.
The issues discovered while resolving archive.ubuntu.com.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Added a new API to get net pkt based on dst address. Destination
address will be used to find correct net_context.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When net_app_ctx has multiple net_contexts, selecting net_context
based on dst address has some glitches.
E.g. One net_app_ctx and two net_contexts (net_ctx1, net_ctx2).
Both net_contexts are mapped to net_app_ctx.
When a caller looking for net_ctx (e.g. net_ctx2) with
matching dst address. Loop goes through net_ctx1 and dst
doesn't match. But another if condition checks does this
net_context mapped to net_app_ctx, yes it matches.
So return net_ctx1, which is wrong.
So first go through all elements in array of net_contexts for
matching dst address, if it fails to find then go for matching
net_app_ctx.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The code in the LwM2M "Device" object was checking for this max
power source config value, except that it was never added as a
Kconfig option. Let's go ahead and add it so apps can set the
value appropriately.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
When attempting to read an unused multi-value resource such as
"Available Power Sources", lwm2m client return a successful coap packet
w/o any values. This looks like a timeout to any lwm2m servers which
make sure a valid response is returned.
Let's fix this by returning the correct NOT_FOUND error code instead.
NOTE: To test this I commented out the portion of the lwm2m client
sample which initializes the LWM2M_DEVICE_PWR_SRC_TYPE_BAT_INT and
LWM2M_DEVICE_PWR_SRC_TYPE_USB values. By default, the sample will
setup dummy values to be returned by the client.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
As per review of PR #5893, this is a follow up patch to update
select_writer() API to match the behavior of select_reader() API.
Quote from OMA-TS-LightweightM2M-V1_0_1-20170704-A. 8.2.5
"An Object Instance or Resource is Read by sending a CoAP GET to the
corresponding path. The response includes the value in the
corresponding Plain Text, Opaque, TLV or JSON format according to
the specified Content-Format (see section 6.4).The request MAY
specify an Accept option containing the preferred Content-Format
to receive. When the specified Content-Format is not supported by
the LwM2M Client, the request MUST be rejected."
Therefore, we do not attempt to assign a content-format when the
requested one is not supported. Instead, we return an error code.
0 is returned when reader or writer has been successfully selected by
select_reader() or select_writer()
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Currently, we always set the content-format as "plain/text" when
it is unrecognized. This is wrong for it's possible that payload
is actually something else.
For example, we don't support JSON as incoming format right now.
But if I send a PUT request to /1/0/1 (server objectinstance/lifetime
resource) with value 3200 in JSON format: {"e":[{"n":"","v":3200}]}.
The client will still handle the request and respond with changed (2.04)
except the lifetime resource is updated incorrectly due to parsing
error.
Correct the behavior by not setting a default format and respond with
content-format-not-support error code (4.15)
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
net_pkt_append() has been changed. If payload reached max value
of 'data_len' in net packet, net_pkt_append will not append.
So the caller has to create new packet and append remaining payload.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
During the CoAP API change, slight changes were made the ref / unref
packet pending process. Let's re-align with the coap-client sample
in how we apply the packet refs in retransmit_request() and also
replace the lwm2m_send_message() call with a direct call of
net_app_send_pkt(). This avoids a second processing of the pending
packets and keeps the ref/unref flow cleaner.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
During the CoAP API change, the way packets were ref'd and then
unref'd in order to stop the packet sending functions from releasing
the net_pkts was changed and never updated in the LwM2M library.
Let's use coap_pending_cycle() and coap_pending_clear() to do the
ref/unref the same way as the coap-client samples in order to
match the pending process with the current CoAP APIs.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Fraction could be stored with negative value.
The implementation was only considering the positive value case.
Therefore, we have to modify the code to take care of the case.
To test it
======================================================================
1. launch eclipse/wakaama lwm2m server
2. launch zephyr lwm2m client and wait for registration completed
3. Issue commands from server
* attr 0 /1/0/1 -0.1 0.1
* disc 0 /1/0
Current output
----------------------------------------------------------------------
Client #0 /1/0 : 2.05 (COAP_205_CONTENT)
105 bytes received of type application/link-format:
</1/0>,</1/0/0>,</1/0/1>;gt=0.1;lt=0/00000,</1/0/2>,</1/0/3>,</1/0/4>,
</1/0/5>,</1/0/6>,</1/0/7>,</1/0/8>
Expected output
----------------------------------------------------------------------
Client #0 /1/0 : 2.05 (COAP_205_CONTENT)
102 bytes received of type application/link-format:
</1/0>,</1/0/0>,</1/0/1>;gt=0.1;lt=-0.1,</1/0/2>,</1/0/3>,</1/0/4>,
</1/0/5>,</1/0/6>,</1/0/7>,</1/0/8>
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
OpenThread requires platform definition with standarized API
so we have to add wrappers to make it compatible with Zephyr.
OpenThread is based on autoconf, this requires
more specific CMakeLists.txt which allows to clone specific
commit or point to local copy of openthread.
Signed-off-by: Kamil Sroka <kamil.sroka@nordicsemi.no>
The meaning of this address type is the same as NET_ADDR_MANUAL,
but with a provision that DHCP can override such an address.
It's intended for the usecase when there's a default static
configuration for when DHCP is not available, but DHCP should
override it.
Before going to add another address type, there was an attempt
to repurpose TENTATIVE address state, but it doesn't work as
expected, as indeed, all existing address types/states already
have clearly semantics, and it makes sense to just another
address type to avoid confusion and unexpected behavior.
Fixes: #5696
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The idea is that static config is used unless/until DHCP values
arrive. This allows to have the same network configuration values
for both a case of direct board - workstation connection (where
DHCP is usually not available), and a case where both a board and
workstation connect to a router (which serves DHCP).
The changes in this commit however take care of netmask and gateway
settings, but not about IP address itself. This is addressed in the
next patch.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
In some cases, we need to initialize DNS servers from a binary
addresses, e.g. in case of DHCP processing. With existing API,
such addresses would need to be converted to strings, just to
be converted back to struct sockaddr in dns_resolve_init().
This is not efficient, and with a number of addresses quite
cumbersome. So instead, allow to pass DNS server either as
strings, or as struct sockaddr's (or both).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
As title, we should update the existing observe_node when new attributes
are written from server side. Add the implementation to handle that.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
1. Read notification attributes set by server to setup the
minimum/maximum notification period of a observation request.
2. Reordering to check observe_node duplication first
(bailout earlier)
3. Simplify remove observe_node condition checking
NOTE: attributes are inheritable, priority: res > obj_inst > obj
Reference: LwM2M spec V1_0_1-20170704-A, section 5.1
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Since we've added storing notification attributes written by server.
We can now append these attributes as part of link-format for discover
op.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Implement write-attribute on obj/obj_inst/res according to LwM2M spec
20170704-A, sec 5.1.2. Support pmin/pmax/st/gt/lt parameters on WRITE
operation.
The basic idea is to add sys_slist_t to obj/obj_inst/res structure.
And attach struct lwm2m_attr to the list when attributes are written
from server side (implement lwm2m_write_attr_handler accordingly)
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Instead of accessing the environment variable ZEPHYR_BASE every time we
require accessing the source code root, use an intermediate variable
that has OS path separators correctly set to '/' to avoid issues on
Windows.
Note: This removes the ZEPHYR_SOURCE_DIR CMake variable. External
applications using that will need to change to use the new ZEPHYR_BASE
variable.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
commit 2a7546fb5a ("net: lwm2m: add support for coap2coap proxy")
erroneously changed the COAP_OPTION_* used to specify the coap2coap
or coap2http proxy resource used from COAP_OPTION_URI_PATH to
COAP_OPTION_PROXY_SCHEME.
Changing it back to COAP_OPTION_URI_PATH requires us to re-order how
the coap options are appended to the packet as the coap options must
be added in the order specified by the numbers in:
https://tools.ietf.org/html/rfc7252#section-12.2
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
CoAP packet w/ confirmation flag set is required to be retransmitted
before it got the ACK message from the peer.
However, the packet is usally unreference once it's sent to the network.
Although we set the timeout as no wait when calling function
net_app_send_pkt(), it's still possible that the packet is unreferenced
before we got a chance to increase the packet reference by calling
coap_pending_cycle().
Usually, the IP stack will generate an ARP packet first and then send
out the packet. However, this is not the case when the remote is a
loopback address.
As issue #5101 described, when asking client to perform a firmware pull
on URL "coap://127.0.0.1:7783/large". The packet will be unreferenced
immediately after calling net_app_send_pkt(). Which then result in
client hang.
The solution to the issue is to increase the reference count on the
sending packet and decrease it after the process is finished.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
This reverts commit 3599d793c2.
Setting a packet's data_len here doesn't fix the fact that we shouldn't
be using it at all on RX packets. Fix belongs in net_pkt_append().
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
When testing TLS connections on production web server, it was noticed
that the TLS mainloop was getting "hung" after a connection was made
via HTTPS and then closed by the server. The TLS mainloop was never
being notified that the connection was closed and was stuck waiting
for more data.
The next time that connection was used, TLS would fail to start.
Let's force trigger a closure of the TLS process when the net-app layer
is notified of the connection closure. This allows the connection to
be successfully reused later.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
This fixes a bug when calling net_pkt_append[_all] which uses
pkt->data_len as part of the maximum packet length calculation
when the net_context is set.
Without this change the maximum packet length is calculated as 0
(the value of pkt->data_len) and an ENOMEM error is returned.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Do not reset net_context information in net_app_close. In case of
TCP behind the curtains connection might wait for some timers to
expire and send some messages (e.g. ACK). If we set source port to
'0', unexpected behaviour might happen with peer connection.
Only reset net_app context related information on net_app_close.
Let net_context_put will take care of proper connection closure.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Of these, only struct net_ipv6_nbr_data::send_ns is a descriptive
change:
send_ns is used for timing Neighbor Solicitations in general, not
just for DAD.
The rest are typo/grammar fixes.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Consolidate and standardize error handling throughout
lwm2m_obj_firmware_pull.c. As well as handle previously
unhandled errors returned from transfer_request().
NOTE: in general, unhandled errors will now result in
RESULT_UPDATE_FAILED. Previously, unhandled errors in
transfer_request() would result in RESULT_CONNECTION_LOST
which might or might not be over-written with another
result later.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
The CoAP samples use an MBEDTLS config "config-coap.h" which could be
re-used by the LwM2M sample, except that most servers use a larger
maximum content length setting of 1500 bytes.
Let's add a CONFIG to set this for users of the CoAP lib and set the
CONFIG value for the samples to the 256 size currently used.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Currently, LwM2M firmware download only supports coap2http proxy.
Let's add support for coap2coap proxy as well.
This was tested running Californium demo app cf-proxy on the host
machine with the following setting changed in Californum.properties:
MAX_RESOURCE_BODY_SIZE=524288
Add the following to the samples/net/lwm2m_client/prj.conf:
CONFIG_LWM2M_FIRMWARE_UPDATE_PULL_COAP_PROXY_SUPPORT=y
CONFIG_LWM2M_FIRMWARE_UPDATE_PULL_COAP_PROXY_ADDR="coap://[2001:db8::2]:5682"
Build the sample for qemu_x86 as you would normally, but now
you can use a real world coap address to pull firmware using the 5/0/1
resource. The host machine running cf-proxy will pull the remote
resource and then deliver it to the running qemu sample.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
- Add needed settings for DTLS support to the lwm2m_ctx structure.
- Add initialization of MBEDTLS to the LwM2M lib based on the
user application settings in lwm2m_ctx.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
The default net_context remote address is scrambled when using a
connection via DTLS. Instead let's use the dtls context remote.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
While looping through possible lwm2m_ctx matches, we're referencing
remote before checking that the context itself is valid.
Also, reduce indentation issues.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Instead of building under the "app" context, let's build the
LwM2M library as a separate static library. This will be helpful
later when adding support for DTLS as w/o this configuration,
the build breaks on MBEDTLS config includes.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
L2 specific data and IEEE 802154 net mgmt interface are not related.
Plus, application may use the net mgmt part, not the L2 one. So let's
split the content in relevant headers.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Content-format is used to determine the type of the PUT/POST
request. Therefore, it's incorrect to assign default when the
caller does not include one in the request.
Define LWM2M_FORMAT_NONE=65535 to indicate the format is missing.
The 65000~65535 is reserved for experiments and should be safe for
the purpose. Check content-type at PUT method to setup
write/write-attrs operation accordingly.
Also, add reporting write-attrs as not implemented to the caller.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
According to LwM2M specification V1_0_1-20170704-A, table 25,
incoming request is a discover op if it is method GET with
accept format as application/link-format
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
According to LwM2M specification 20170208-A, there are two different
discover interfaces supported by the device.
(1) Bootstrap discover (sec 5.2.7.3) (To be implemented)
(2) Device management discover interface (Sec 5.4.2)
- object ID is required (i.e. root directory discover is not allowed)
- attributes should be responded accordingly when implemented
This patch correct the behavior according to the spec and summarized
as follow
(1) Still support CoAP ".well-known/core" but change to report only
first level of the URI.
(2) Respond to caller only when object ID is provided unless it's
bootstrap discover
Fixes#4941
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
- Renaming NET_L2_RAW_CHANNEL to NET_RAW_MODE
- Create a generic IEEE 802.15.4 raw mode for drivers
- Modify the IEEE 802.15.4 drivers so it passes the packet unmodified,
up to code using that mode to apply the necessary changes on the
received net_pkt according to their needs
- Modify wpanusb/wpan_serial relevantly
Fixes#5004
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
In 90b471fe4, there was a change to make k_poll() return EINTR error
if it was cancelled with k_fifo_cancel_wait(). Handle this change, or
otherwise sockets EOF handling was broken.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If net_context_recv() returns a error, net pkt will not be released. For
example, net_context_recv() returns -EBADF because the TCP connection is
closed by the peer.
Handle the return value instead of using SET_ERRNO().
Signed-off-by: Aska Wu <aska.wu@linaro.org>
Token is missing when we jump to the error and token is not yet setup.
To correct it, we grab the token from the input packet at the beginning
of the handle_request()
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Copy/paste error was checking minimum measurements where it
should have been checking maximum measurements.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Initial values for the min/max measurements were 0 and this caused
issues with sensors maximums that weren't above 0 and minimums that
went below 0. Let's update those to MAX_INT so the first sensor
value update will set those to correct values.
When resetting the measured values, let's use the current sensor
value not 0.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Logic for sending chunks of data is incompatible with adding
Content-Length: header.
Per https://tools.ietf.org/html/rfc7230#section-3.3.1:
"A sender MUST NOT send a Content-Length header field in any
message that contains a Transfer-Encoding header field."
Going a bit further in my mind: also don't send Transfer-Encoded
chunked data either when the Content-Length header is present.
In general, there will be problems if the http client library
makes payload changes without the user code knowing about it.
This patch removes the use of http_send_chunk() from the new
HTTP client code and instead sends the payload directly to
http_prepare_and_send()
This fixes an issue where every available buffer would be allocated
with repeating payload data because the for loop in http_request()
wasn't ending until we ran out of memory.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
We should not use the user suppied timeout setting in
http_client_send_req() for the connection timeout. In the
previous API the call to tcp_connect() used
CONFIG_HTTP_CLIENT_NETWORK_TIMEOUT as the timeout setting.
Let's do that here too.
This fixes -ETIMEDOUT error generation when using K_NO_WAIT
for http_client_send_req().
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Add status error string when sending a error message from
HTTP server to client as described in RFC 2616 ch 6.1.
Previously only error code was sent except for 400 (Bad Request).
This also fixes uninitialized memory access in error message.
Coverity-CID: 178792
Fixes#4782
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
The addrlen of accept() and recvfrom() is a value-result argument. It
should be updated to the actual size of the source address after
calling accept() and recvfrom().
Signed-off-by: Aska Wu <aska.wu@linaro.org>
Update the firmware update_result accordingly by checking return
value of the firmware data write callback registered by application.
Also, set response code according.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Create http library that uses net-app instead of net_context
directly. The old HTTP API is deprecated.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
A regression by commit 9728179757 ("Allow net_context re-connect").
The code did not create IPv4 listener if IPv6 listener was successfully
created.
Fixes#4697
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We should call coap_update_from_block() which will determine the minimum
size of the BLOCK1 SIZE between server/client and update the current
offset and total size(if available) accordingly.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Due to parameters used, net_context_recv() call cannot fail (it just
installs a callback, no I/O performed).
Coverity-CID: 178247
Fixes: #4581
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If we receive lot of data fragments, then yield after initial
processing so that TLS thread can start to work on these.
If we do not yield here, we pile up data buffers and might run
out of memory more easily.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It might happen in TCP client, that the TCP connection is terminated
in which case net_context is freed. Check this and mark corresponding
net_context inside net_app to NULL. This way there will be no issue
to access already freed net_context.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The client TLS code did not handle server issued close properly.
Now the connection is terminated properly and TLS thread is left up to
wait more requests from the user.
This commits adds new boolean field to net_app context. Because there
are already multiple boolean flags there, convert them all to bitfields
to save space.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the TLS handshake might take long time before connection is ready,
check this before trying to send user data.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print information that we are sending plain data and receiving
encrypted data, the code claimed that we are sending encrypted
data which is not the case here.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If user closes the client connection, then make sure that
user can just call net_app_connect() instead of calling the
client init. The client initializes everything in net_app but
for simple re-connect that is not necessary.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Now that objects and samples have their return values fixed, let's
propagate them back up to the user if there's an error.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Previously, post_write and execute callbacks returned 1 when handled
and 0 for error condition. However, this wasn't detailed enough and
the engine can't propagate any sort of error back to users -- so it
doesn't even check the return values in many cases!
Let's adjust the resource callback functions of all objects and the
lwm2m_client sample to return 0 for success or a valid error code.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Now that we can access resource data in the lwm2m subsys, let's use
the user provided firmware push buffer (5/0/0) to also store the
firmware pull data.
This way the size of the firmware pull buffer is completely up to the
application.
NOTE: This patch adds a 64 byte firmware buffer to the lwm2m_client
sample for this purpose.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
With the change to support multi-fragement buffers in the LwM2M subsys,
the OPAQUE data type was direct write methods were broken.
Let's fix OPAQUE handling by using the newly introduced getter methods
which can use multiple user callbacks (depending on the size of the
user provided buffer). Let's also add public methods for users to set
/ get OPAQUE data in resources for future use with DTLS key data.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
The lwm2m_engine_get_resource() function needs to be made available to
other portions of the lwm2m subsys in order for firmware resource data
to be used in the future.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
During conversion from the ZoAP to CoAP APIs the use for this variable
was removed, but the variable itself was left in place.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
No need for 2 different defines to specify URI lengths in the source
for firmware pull method. Let's combine them.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Each content formatter should have a way of handling opaque data.
For instance TLV data will individually be able to specify a length
but plain text will take up the rest of the packet.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
The existing LwM2M framework expected contiguous buffers and this
was the reason for the 384 byte buffer sizes. This was previously
a limitation of the ZoAP API. The new CoAP API doesn't have this
limitation and the LwM2M library has already been migrated to use
it.
Let's finish the process by replacing any contiguous buffer handling
with the correct net_pkt APIs to parse across multiple fragments.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
application/octet-stream is used to indicate opaque payload format.
Use plain text handler to handle the opaque format.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
When the header file is located in the same directory as the source
file it is better to use a relative quote-include, e.g.
than a system include like
Avoiding the use of system includes in these cases is beneficial
because;
* The source code will be easier to build because there will be fewer
system include paths.
* It is easier for a user to determine where a quote-include header
file is located than where a system include is located.
* You are less likely to encounter aliasing issues if the list of
system include paths is minimized.
Authors:
Anas Nashif
Sebastian Bøe
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Recent commit fb7f6cfa97 ("net: lib: http: Fix invalid pointer
body_start") introduced logic to reset the response body_start pointer
when the response buffer was reused.
This check needs to be fixed so that it doesn't arbitrarily change
body_start when not needed.
The problem with the current check can be demonstrated by not setting
a response callback for request which generates a large response
spanning multiple packets.
In this case body_start is still valid (not reusing the response buffer
because there is no callback set), but it will be changed when the 2nd
packet is received and the "at" marker is located at the head of the
new packet (!= response_buffer).
Signed-off-by: Michael Scott <michael.scott@linaro.org>
When moving to the new CoAP API, I thought we would need to parse
incoming option values longer than 12 characters.
This hasn't proven to be true, so let's remove the auto-selection of
this config. If needed user can set this option later.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Currently, we check the length of an option value in the
coap_packet_append_option() function. This isn't required as
we're appending to a net_pkt and not using struct coap_option
where the limitation is imposed.
Instead, we should check the option value length in
parse_option() where we assign the value to a struct
coap_option.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Inform user if we could not install receive callback after
a connection is created in net-app client.
Coverity-CID: 178246
Fixes#4582
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Inform user if we could not install receive callback after
a connection is accepted in http server.
Coverity-CID: 178244
Fixes#4584
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we run out of memory, then net_pkt might be null and we must
not access it.
Coverity-CID: 178235
Fixes#4593
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The body_start field at http_client_ctx.rsp is used to check if this
fragment contains (a part of) headers or not.
If the device recived more than one fragment in one http response,
may cause re-use of the result buffer in function on_body().
Once the device re-use the result buffer, the body_start that point
to this buffer address will no longer be valid.
Signed-off-by: Ding Tao <miyatsu@qq.com>
Remove the RD client's stack in favor of using the engine's periodic
service to trigger RD client events. This saves 5K RAM of stack based
memory.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Remove the stack from the device object and instead make use of
the periodic engine service which will trigger the device service
when it's ready.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Stacks cost a lot of RAM in Zephyr. We have 3 total stacks in
the LwM2M lib. We can remove 2 of these if add a service handler
into the main LwM2M engine. Each service can register with this
handler so that they can be called based on their own periodic
timer. The handler itself will search through these registered
services and call them when they become due otherwise sleep
until another is ready.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Let's use conservative defaults for the LwM2M library to enable
hardware with constrained resources. Users can increase where
necessary.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Let's use snprintk for simple formatting to allow for possible disabling
of printf and protect calls to sprintf from string overruns.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
When using Leshan REST API to perform a discover OP on a client, only an
accept field is sent with "application/link-format". Current logic uses
the content-type to determine when a discover OP is indicated. Let's
handle this case as well.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Let's rename lwm2m_release_message() to lwm2m_reset_message()
and add a parameter to let the function know whether or not to
release the lwm2m_message resource back to the pool.
By adding the optional release parameter, we can keep the
lwm2m_message but reset the underlying net_pkt / net_buf resources.
This allows us to regenerate the net_pkt after determining
an error has occured. In this case, we don't want the previously
added net_pkt contents but we do want to maintain the message id,
token, etc.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
This patch moves from the ZoAP API in subsys/net/lib/zoap to
the CoAP API in subsys/net/lib/coap which handles multiple
fragments for sending / receiving data.
NOTE: This patch moves the LwM2M library over to the CoAP APIs
but there will be a follow-up patch which re-writes the content
formatter reader / writers to use net_pkt APIs for parsing
across multiple net buffers. The current implementation assumes
all of the data will land in 1 buffer.
Samples using the library still need a fairly large NET_BUF_DATA_SIZE
setting. (Example: CONFIG_NET_BUF_DATA_SIZE=384)
Signed-off-by: Michael Scott <michael.scott@linaro.org>
From RFC 7252, section 3
"The absence of the Payload Marker denotes a zero-length payload.
The presence of a marker followed by a zero-length payload MUST
be processed as a message format error."
Check empty payload when COAP_MARKER is found and add a test case to
cover it
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Options parsing helpers functions unable to handle the malformed
packets and dropping it. Improved parsing functionality to handle
malformed packets. Also payload marker is not mandatory in CoAP
packets when there is no payload. Exit gracefully when CoAP
packet contains only options.
Fixes#4396.
Coverity-ID: 178060
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
We need to skip protocol headers when setting pointer to
application data when receiving TLS data.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If user has enabled CONFIG_NET_DEBUG_APP, then the debugging
version of _net_app_select_net_ctx() was not properly declared
and it caused compile error.
Fixes#4481
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If building a server that does not support TCP, then the
get_server_ctx() is not needed and thus needs to be compiled out.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Don't use names like "strlen" for parameters. Try and name buffer
parameters consistently.
NOTE: For several functions I removed "const" flag. This is
intentional and will be needed in upcoming patches.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Remove some left over TODOs and also fix a TODO where we need to return
the appropriate error code to generate a 4.05 response.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
This calculation reads the length portion of the COAP header to determine
the length of the coap packet. However, when encrypted via DTLS this
value seems to be getting corrupted. Let's change this calculation so
that it will work for when DTLS is both enabled and disabled. Use the
total length of the fragment data and substract back out the headers
to get a correct value.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
If we get MAC verification error in handshake, it could be that
everything is fine but we ran out of heap memory in mbedtls.
In this happens, suggest the user to check amount of memory
in mbedtls as it might just fix the issue.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As we select net_ctx, it is useful to see who actually called
the _net_app_select_net_ctx() when debugging the call flow.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Sometimes when sending network packet, the wrong net_context was
selected which prevented data to be sent.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We should not close the TLS connection immediately if the TLS
data is not yet sent. So if user calls net_app_close() and we
still have data pending, then send the TLS data and only after
that close the connection.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As there can be multiple listening network contexts, it should
be possible to close one of them.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The server is able to listen and serve multiple incoming
connections. This commit does not add support for multiple
incoming TLS connections.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The stack of rd client is exhausted while running lwm2m client w/ IPv6
and network log global enabled. Increase the stack size to 1536 when
NET_LOG_GLOBAL is enabled.
Detail described at #4424
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
".well-known/core" is mainly used with method GET for performing the
resource discovery (RFC 6690). Since we are implementing a LwM2M client
and is not implement a resource directory which allow others to do the
resource registration (POST to .well-known/core). Only GET method is
allowed for the usage. Report 4.5 (Method Not Allowed) if other methods
are requested.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Modify zoap_options_to_path() to return error when URI contains
character other than digits and return 4.04 NOT FOUND to caller.
PATH such as "/1a/2/3" was treated as "/1/2/3" after parsring
which is incorrect.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Return 4.05 Method Not Allowed when path is empty ('/') to the
caller for it's only use by bootstrap delete. This change also avoid the
empty path being treated as request targeted at 0/0/0.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
1) Respond NOT FOUND to caller when object doesn't exist
2) Report as internal server error when OP not handled
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Applications may want to be notified when various events
happen in the LwM2M rd client. Let's implement an event
callback which sends: connect, disconnect and update events.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
CoAP allows a proxy to be used when transferring data (CoAP-CoAP and/or
CoAP-HTTP) by creating request on a specific URI path and by using the
Proxy URI CoAP option. Create specific Kconfig options for the proxy
server address and port, until a parser gets implemented.
Code tested with Californium acting as CoAP proxy.
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
[michael.scott@linaro.org: rebased on net_app + lwm2m_message
refactoring + firmware update changes.]
Signed-off-by: Michael Scott <michael.scott@linaro.org>
During firmware download via block-wise transfer, we can see
packets occaionally get re-transmitted (normal logic in the
pending / retry functions). However, both of these packets
end up coming through the reply handler and we should ignore
any block-wise transfer that has a current value less than
where we expect to be.
NOTE: This fixes K64F ethernet transfers where we were getting
too many packets back in the handler.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
UDP packets can be lost in heavy traffic. Normally we can handle this
with pending packet processing for packets which have not been responded
to with an ACK. However, due to the time it takes for firmware to
download via CoAP, an extra level of retries should be added.
The process works like this:
Normal pending packets will try to send 3 times fairly quickly.
If that fails, then the timeout callback is called for the firmware
download process. A retry counter is incremented and the timeout
callback perform a new packet send of the block-wise transfer
packet that is missing, until the retry counter hits a limit (3)
and then the transfer is aborted.
This allows for a longer "outage" to happen during firmware transfer
and the process can still succeed.
NOTE: This patch does not fix a current bug where the pending process
is not re-sending the packets correctly, it only makes the process
more stable with a better chance to work.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
When a packet expires after the pending retries we call
lwm2m_release_message() to free up resources. This includes
cleanup of the pending structure which calls net_pkt_unref on
the pending packet. This would normally free up the packet
memory. However, earlier in the pending processing we add a ref
to the packet so that normal send processing doesn't free up
the memory. This meant we were leaking packet memory every
time we had an expiration due to timeout.
Let's do an unref prior to calling lwm2m_release_message() to
make sure the packet memory is freed correctly.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Previously, firmware support wasn't initializing the retransmit work
or the extra network packet pools. Let's fix that.
NOTE: While this fixes the setup of retransmit work, the actual
attempts to re-send packets which are pending is failing. Needs
another follow-up fix.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Create an internal function lwm2m_engine_context_init() which sets
the extra packet pools and initializes retransmit work internal to
the LwM2M engine.
This function will be used by firmware pull support which establishes
a new LwM2M context for downloading firmware.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
In the case of a proxy server translating HTTP -> COAP (known in
the code as "separate reply"), we were leaking lwm2m_message structures.
This was due to pending objects being cleared out during the first ACK,
and no other way of finding a matching message when the follow up packet
was received. Let's add a second match for reply to make sure we can
find our matching message resources.
NOTE: This change renames find_msg_from_pending() to find_msg() and
makes it a static function as it's only used by the lwm2m_engine.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
This is a useful message announcing that the RD client state machine
is starting for a particular connection. If the log level is set
low so that DBG messages are hidden, then this message goes away.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
1. Add handling block1 option in handle_request(). The basic idea is
to declare structure block_context at compiled time and use "token"
as a key to pick up the on-going block cotext. It should be able to
support multiple blockwise transfer concurrently
2. Use write callback implemented in lwm2m_obj_firmware to deal w/ the
update state transition and than call the callback registered by the
application
3. move default_block_size to lwm2m_engine.c to share between
lwm2m_engine and lwm2m_obj_firmware_pull
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
[michael.scott@linaro.org: rebased on LwM2M net_app changes.]
Signed-off-by: Michael Scott <michael.scott@linaro.org>
OPAQUE resource type might/might not have data_ptr/data_len setup
depending on the implementation. This introduce an issue that when
OPAQUE resource is written from the server side, the ones w/ none
setup will not be able to get the data at post_write_cb()
Modify to setup data_ptr/data_len as incoming buffer and buffer size
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
1. Parse firmware pull URI
2. Add lwm2m_firmware_get/set_update_cb() for application to register
callback. This is because we want to check the update_state before
we pass to the application
3. Add lwm2m_firmware_get/set_update_result() and
lwm2m_firmware_get/set_update_stat() to manage the state transition
as well as the sanity check
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
[michael.scott@linaro.org: rebased on net_app framework and
lwm2m_message refactoring.]
Signed-off-by: Michael Scott <michael.scott@linaro.org>
With future patches we will need to parse URLs in the registration
client and firmware object. Enable it by default when LWM2M is
enabled.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
If there is no connection to server, then _net_app_select_net_ctx()
will return NULL. This is perfectly fine and we can just continue.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use the remote address to determine what address family to bind.
This prevents extra context to be created. In order to avoid
parsing the peer address string multiple times, the client
init function is re-factored.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Currently this is defined as a k_thread_stack_t pointer.
However this isn't correct, stacks are defined as arrays. Extern
references to k_thread_stack_t doesn't work properly as the compiler
treats it as a pointer to the stack array and not the array itself.
Declaring as an unsized array of k_thread_stack_t doesn't work
well either. The least amount of confusion is to leave out the
pointer/array status completely, use pointers for function prototypes,
and define K_THREAD_STACK_EXTERN() to properly create an extern
reference.
The definitions for all functions and struct that use
k_thread_stack_t need to be updated, but code that uses them should
be unchanged.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Some doxygen directives were missing from dns_pack.h file.
Also make function header documentation look better.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This creates mDNS responder and serves configured IP addresses
to the callers which want to resolve .local addresses.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
net_context_sendto() returns an error if dest address is NULL.
If dest address is available, net_conext_sendto() should be used.
Otherwise, net_context_send() should be used.
Fixes#4347
Signed-off-by: Aska Wu <aska.wu@linaro.org>
With the introduction of CoAP and other protocols, URL parsing is
be needed when HTTP_PARSER is not. Let's split out the existing
functionality of URL parsing into it's own CONFIG and let
HTTP_PARSER use it by automatically selecting HTTP_PARSER_URL when
HTTP_PARSER is enabled.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
When CONFIG_STDOUT_CONSOLE is not selected, there is no printk()
function. An alternative (printf) must be used.
This fix was taken from tests/crypto/mbedtls/src/mbedtls.c
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Current coap library fails to parse or prepare if packet is more
than one fragment. Added support to handle multi fragment packet.
Also well-known/core api used to prepare coap packet and send it
through net context api immediately. This is goind to be problematic
if user doesn't enable net context. Also user can not encrypt coap
packets. Now api will return prepared coap packet to application.
Application will send it to peer.
Jira: ZEP-2210
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
ZOAP library has certain limitations in parsing and preparation of
coap messages. It can handle only on single network fragment. If
network packet is split between multiple fragments it fails. This
patch is just copy and rename of 'zoap' to 'coap'.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This is similar to the changes made previously to other network
components: if user selected NET_LOG_GLOBAL, they really mean
they want logging (first of all, error/warning logging) across
the entire network stack.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Due to timeout checking the minimum lifetime must be 15 seconds,
and we're storing the lifetime as an unsigned short so set the
maximum to 65535.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Callbacks are setup for the following states:
- ENGINE_DO_BOOTSTRAP
- ENGINE_DO_REGISTRATION (first registration)
- ENGINE_REGISTRATION_DONE (subsequent client updates)
- ENGINE_DEREGISTER
In most cases, if a timeout occurs the registration engine goes back to
ENGINE_INIT. The exception is a timeout during client update, which
forces the state machine back to ENGINE_DO_REGISTRATION (skipping a
boostrap).
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Sending an lwm2m message is too difficult. It requires pending / reply
and other structures to be configured and set by various portions of
the library. There is also no way to know if a pending message ever
encounters a timeout.
Let's fix this by simplifying the internal LwM2M engine APIs for
handling lwm2m messages:
1. A user calls lwm2m_get_message(lwm2m_ctx) which returns the first
available lwm2m message from an array of messages
(total # of messages is set via CONFIG_LWM2M_ENGINE_MAX_MESSAGES).
2. Next the user sets all of the fields in the message that are
required (type, code message id, token, etc)
3. Then the user calls lwm2m_init_message(msg). This initializes the
underlying zoap_packet, pending and reply structures.
4. Once initialized, the user creates their payload in msg->zpkt.
5. When the user is ready to send, the call lwm2m_send_message(msg).
6. And if for some reason an error occurs at any point, they can free
up the entire set of structures with: lwm2m_release_message(msg).
Included in the refactoring is a timeout_cb field which can be set in
the LwM2M messages. If a pending structure ever expires the engine
will call the timeout_cb passing in the msg structure before it's
automatically released.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Instead of using a magic reference to 8 for token length, let's
establish a define for MAX_TOKEN_LENGTH and then use it for both
variable definitions and to make sure tokens are valid. Also,
Correct the handling of a special token length value (0xFF) which
lets lwm2m_init_message() know to skip token generation. We were
using a -1 value here previously (on a u8_t variable).
Signed-off-by: Michael Scott <michael.scott@linaro.org>
send()/sendto() aren't "front facing" functions, so when user calls
them, context type hopefully should be already validated by other
functions. They are also on critical path of app/network performance,
so getting rid of extra check helps a little bit too. This also
fixes a warning of "err" possibly being used non-initialized.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The implementation is based on net app API. It sends the request and
parses the server reply by following some suggestions mentioned in the
secion "SNTP Server Operations" of RFC 4330.
The system uptime is used as the transmit timestamp of client request
This lib can work on those devices without RTC.
Signed-off-by: Aska Wu <aska.wu@linaro.org>
sendto() and recvfrom() are often used with datagram socket.
sendto() is based on net_context_sendto() and recvfrom() is based on
zsock_recv() with parsing source address from the packet header.
Signed-off-by: Aska Wu <aska.wu@linaro.org>
Other parts of the networking subsystem may use net_pkt_ip_hdr_len() on
a packet that has been encrypted for use with DTLS. Let's restore that
value here so those areas don't receive an erroneous 0 value.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
If the caller of http_client_send_req() sets the timeout to
K_NO_WAIT, then the function would still wait for a while before
returning to the caller.
Jira: ZEP-2624
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If IPv6 is disabled, then it is useless to try to resolve
IPv6 address because "struct sockaddr" does not have enough
space to store IPv6 address.
Fixes#1487
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is useful to enable error/warning logging across the net
codebase (less useful for debug level logging, but that's true
for CONFIG_NET_LOG_GLOBAL already).
Implementation-wise, instead of keeping adding to long list of
"select"'s in CONFIG_NET_LOG_GLOBAL and thus introduce component
inter-dependencies, add "default y if NET_LOG_GLOBAL" to
individual components' logging options.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This is the first part of a large refactoring of LwM2M library
message functions and will simplify observer handling later.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
All throughout the LwM2M library we use sockaddr values which are
basically the same as the net_app_ctx's remote addr. There's no
reason to keep these extra sockaddr values around. The net_app
framework client won't accept incoming requests on sockaddr other
than the one we're connected to.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
This is the final stage of moving the LwM2M library internals to
the net_app APIs. This means we can support DTLS and other
built-in features in the future. All of the logic for
establishing the network connection is removed from the sample
app.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
In preparation for the move to net_app APIs, we will need
to pass net_app_ctx structures around to the following
functions:
lwm2m_udp_sendto()
udp_request_handler()
Let's add the parameter as net_context for now so the
transition will be smoother later.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
This allows use to associate easily the replies / pending operations
with a specific network connection.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
The LwM2M library does not use net_app APIs internally. To help
this effort let's establish a user facing structure "lwm2m_ctx"
(similar to http_client_ctx and mqtt_ctx) and start it off by
wrappering the net_context structure.
Future patches will add user setup options to this structure and
eventually remove the net_context structure in favor of a net_app_ctx.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
This implements mDNS client from RFC 6762. What this means that
caller is able to resolve "hostname.local" names using multicast DNS.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Errors has been ignored when using TLV writer to create/write object
instance/resources. Modify to propagate the error back to the caller.
To reproduce the issue, try to create IPSO light control object
instances twice. Since the default instance count is 1, the second one
should be rejected and responded w/ error. But the current
implementation will respond w/ 2.04.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
We did not check the requested object/object instance/resource exists or
not before we adding an observer. Correct it by checking the existence
first.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
We should stop sending out notification to the peer when the
object/object instances requested to be observed is removed
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
We were using sys_slist_remove() to remove object, object instance and
observer w/o passing the previous sys_snode_t to it (NULL).
This will instruct the function to treat the node as the list head and
result in unexpected behavior after the removal.
Correct it by using sys_slist_find_and_remove() or passing the previous
node to the function.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
When a request demands to create a new object instance, it will search
whether the request object instance exists or not. However, current
implementation does not reset the lwm2m_engine_obj_inst at the time it
is deleted. It only removes the object instance from the sys list.
Correct the behavior by resetting both object instance and resource
instances at the time it's deleted. Also, consolidate function
lwm2m_delete_handler() and lwm2m_delete_obj_inst().
To reproduce the issue, try to create light control object instance
(/3301), delete the created instance and create it again. You shall find
following error message dumped.
> [ipso_light_control] [ERR] light_control_create: Can not create
instance - already existing: 0
> [lib/lwm2m_engine] [ERR] lwm2m_create_obj_inst: unable to create obj -
3311 instance 0
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
The commit 725be227 ("net/mgmt/event: Commands must be > 0 so
masking them works") prevented IPv6 address setting when an
application was initialized. The check in subsys/net/lib/app/init.c
needs to be adjusted because of that change.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When new socket context is created on accepting connection to a
listening socket, its recv_q FIFO should be initialized. Without
initialization, this worked by a chance when FIFO structure was
simple, but recent change to add dlist to it (which now needs
proper initialization) exposed this issue.
Jira: ZEP-2576
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If the query name is already in numeric format, there is no
need to send the query string to DNS server as we can just
convert it ourselves.
Jira: ZEP-2562
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit removes IP address parsing from DNS init and
replaces it by call to net_ipaddr_parse().
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
TLS and DTLS are not related to each other so allow DTLS to be
enabled even if TLS is disabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The IP header was stripped by _net_app_ssl_mux() when it received
IP packet. This is fine but if the application expects the get
the IP header, then there is a problem. Fix this by saving IP
header to ssl_context and then putting it back in front of the
packet when the data is passed to application.
Note that this IP header is not used by net_app when the packet
is sent because TLS/DTLS creates a tunnel for transferring packets
and user can only sent packets via this tunnel.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
k_delayed_work_cancel now only fail if it hasn't been submitted which
means it is not in use anyway so it safe to reset its data regardless
of its return.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The original commit 8ebaf29927 ("net: http: dont timeout
on HTTP requests w/o body") was intended to handle a case
where an HTTP response had been retrieved from the server but
the HTTP parser couldn't meet the criteria for calling
"on_message_complete". For example, a POST to a REST API
where the server doesn't return anything but an HTTP
status code.
It was a really bad idea to check a semaphore count. There
is a lot of kernel logic built into semaphores and how the
count is adjusted. The assumption that the value is 0
after the k_sem_give() is incorrect. It's STILL 0 if
something is pending with a k_sem_take(). By the time
k_sem_give() is done executing the other thread has now
been kicked and the count is back to 0.
This caused the original check to always pass and in turn
breakage was noticed in the http_client sample.
Let's do this the right way by setting a flag when
on_message_complete is called and if that flag is not set
by the time we reach recv_cb, let's give back the semaphore
to avoid a timeout.
Jira: ZEP-2561
Signed-off-by: Michael Scott <michael.scott@linaro.org>
The HTTP header field pointers are saved for each HTTP request.
But the counter that saves the pointers was never reset to initial
value when the connection was dropped. This meant that the header
field values were only proper for first HTTP request.
Jira: ZEP-2463
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The server needs global enable/disable status instead of only being
able to enable or disable just the TLS server part.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we have specified AF_UNSPEC when initializing application
server local address, then we try to bind to both IPv4 and IPv6
addresses. The old code did not honor the port number in this
case but used some random value for port.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If user has specified a specific local address, then honor that
and do not try to bind IPv4 context if only IPv6 is defined,
and vice versa for IPv6.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Setting just IPv4 address as was allowed before isn't enough for
real-world usage (e.g. accessing DNS and outside servers in general).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Per LwM2M spec (7.3.2.4 Operation on Object):
"If the payload (New Value) conveys an Object Instance ID in conflict
with one already present in the LwM2M Client, the complete request
MUST be rejected and a "Bad Request" error code MUST be sent back."
Let's do that.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Per LwM2M specification 7.3.2.4, "Optional Resources MAY be conveyed
in the "New Value" parameter as well; the LwM2M Client MAY ignore the
optional resources it doesn't support."
Update TLV/JSON writer to ignore error when object fields are not
found (treated as optional resource). This will allow the resources
supported being written.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
[michael.scott@linaro.org: re-worked patch post addition of CREATE
operation.]
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Prior to this patch, a CREATE operation was handled as a WRITE operation
after the object instance was created. This becomes problematic when
handling of optional resources differs between these 2 operations.
Let's introduce an actual CREATE operation and use it later to create
these differences.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
We are returning EINVAL from content format write ops when an object
field definition is not found (an optional field which is not
implemented). Instead, return ENOENT which lets the LwM2M engine
know to send ZOAP_RESPONSE_CODE_NOT_FOUND to the LwM2M server at the
end of handle_request().
NOTE: This behavior is not correct when we call the writer right after
a CREATE operation where the data is assigned to resources for the
first time. This case will be handled in a follow-up patch once we're
able to distinguish between a WRITE and a CREATE in the write op
handler.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
POSIX requires struct sockaddr's field to be named "sa_family"
(not just "family"):
http://pubs.opengroup.org/onlinepubs/009696699/basedefs/sys/socket.h.html
This change allows to port POSIX apps easier (including writing
portable apps using BSD Sockets compatible API).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Per LwM2M specification 5.3.1 Register, report "ct=11543" when JSON is
supported. Also, report the resource type as rt="oma.lwm2m" when "ct="
presents.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Per LwM2M specification 5.3.1 Register. When object instances are
available, object ID can be ignored in registration message
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
According to LwM2M specification 5.2.7.3 Bootstrap DISOCVER,
security object is only reported to the bootstrap server.
Correct the behavior to (1) report server object to the server
(2) do not report security object at registration time
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
This is how it's called in the main docs, so use this same phrase in
Kconfig and samples too.
Also, added some articles to docs.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Make sure that a network packet is sent after calling
http_response_send_data(). Othwerwise the packets might be
piling up and not sent in timely manner.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Currently, the HTTP_NETWORK_TIMEOUT setting is hard-coded as 20 seconds.
Not every application may want to wait that long, so let's change this
to a CONFIG option: CONFIG_HTTP_CLIENT_NETWORK_TIMEOUT
NOTE: This also removes HTTP_NETWORK_TIMEOUT from the public http.h
include file. It was not being used externally to HTTP client sources.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
A TCP FIN message is passed on to user apps as a tcp_received_callback
with a NULL pkt parameter. This means the connection is closing and
the app should do whatever cleanup it needs as there will be no further
callbacks for the current TCP connection.
Currently, if a HTTP client request doesn't receive a "body" which
the HTTP parser can use to trigger on_message_complete, then the request
will end up timing out and most apps will think an error has occurred.
Instead, let's handle the TCP FIN message and return the waiting
semaphore, leaving the app to deal with whatever has been set in the
current HTTP context response data (IE: http_status).
This fixes using HTTP client to send POST data to servers which
only respond with HTTP_OK status and no body.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
"Network Application Support" itself is renamed from "Network
Applications" and also includes net_app API.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If the user has not specified CONFIG_NET_APP_MY_IPV4_ADDR or
CONFIG_NET_APP_MY_IPV6_ADDR, the value is set to "" in this case.
This will be converted to ANY IP address which is not useful
to be set to the network interface. So check this and just
continue the init in this case without setting the IP address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The documentation says that the API will automatically append the
net_buf fragment to the end of network packet fragment chain.
This was not the case and current only user for this API in
echo-server sample appended the fragment itself. The fix is to
automatically append the fragment to the end of fragment chain.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
1. According to the specification 5.3.1, it's a MUST to specify
(1) content format: app link format (2) supported lwm2m version.
Also, we should use text/plain instead of LWM2M's (obsolete).
2. Use LWM2M_FORMAT_OMA_TLV as default accept format when accept option
is not given from the caller for TLV is a MUST have in LwM2M spec and
it can deals w/ multiple resources read
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Save in observe_node_data so that later on we can select the correct
content format requested by the caller at the first time
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Function do_write_op_tlv() uses in->inbuf and in->insize as a looping
condition to iterate through items in TLV payload and call
do_write_op_tlv_item() to update the value.
However, do_write_op_tlv_item() will override the value before calling
for fitting the usage of lwm2m_write_handler() function without restore
them. (lwm2m_write_handler() is also called by plain text/json writer
and is expecting in->inbuf is the start of buffer and in->insize as the
length of the buffer)
This will result in errors in do_write_op_tlv().
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
RFC-7230 "HTTP/1.1 Message Syntax and Routing" Section 5.4
describes the "Host" header formatting. If Zephyr user
specifies a host string as a part of the HTTP client request
structure, we end up sending an incorrect HTTP header due
to a missing "Host :" text.
Fix this by prepending "Host: " to the header data before
the user supplied host string.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
sprint_token is only used by SYS_LOG_DBG, so only build it when
CONFIG_SYS_LOG_LWM2M_LEVEL > 3.
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Separate response can happen when handling block transfer for firmware
updates, and to avoid duplicating the lwm2m_udp_receive function, create
and additional flag to allow handling CoAP separate response messages.
This is required to avoid removing the reply callback, since a new
message (with a valid token) will be received later from the server.
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Simplifly net_context_sendto calls and also allows to easily debug every
send/receive lwm2m call.
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
The API name space for Bluetooth is bt_* and BT_* so it makes sense to
align the Kconfig name space with this. The additional benefit is that
this also makes the names shorter. It is also in line with what Linux
uses for Bluetooth Kconfig entries.
Some Bluetooth-related Networking Kconfig defines are renamed as well
in order to be consistent, such as NET_L2_BLUETOOTH.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
IPSO Smart Objects are a set of template objects based on the LwM2M
object framework which are designed to represent standard hardware
such as temperature and humidity sensors or light controls.
Let's add a place for these objects to live as well as an initial
temperature sensor object.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Origin: SICS-IoT / Contiki OS
URL: https://github.com/sics-iot/lwm2m-contiki/tree/lwm2m-standalone-dtls
commit: d07b0bcd77ec7e8b93787669507f3d86cfbea64a
Purpose: Introduction of LwM2M client library.
Maintained-by: Zephyr
Lightweight Machine-to-Machine (LwM2M) is a protocol stack extension
of the Constrained Application Protocol (CoAP) which uses UDP
transmission packets.
This library was based on source worked on by Joakim Eriksson,
Niclas Finne and Joel Hoglund which was adopted by Contiki and then
later revamped to work as a stand-alone library.
A VERY high level summary of the changes made:
- [ALL] sources were re-formatted to Zephyr coding standards
- [engine] The engine portion was re-written due to the heavy reliance
on ER-CoAP APIs which are not compatible to the Zephyr CoAP APIs as
well as other Zephyr specific needs.
- [engine] All LWM2M/IPSO object data is now abstracted into resource
data which stores information like the data type, length, callbacks
to help with read/write. The engine modifies this data directly (or
makes callbacks) instead of all of the logic for this living in each
object's code. (This wasn't scaling well as I was implementing
changes).
- [engine] Related to the above change, I also added a generic set of
getter/setter functions that user applications can call to change
the object data instead of having to add getter/setting methods in
each object.
- [engine] The original sources shared the engine's context structure
quite extensively causing a problem with portability. I broke up the
context into it's individual parts: LWM2M path data, input data and
output data and pass only the needed data into each set of APIs.
- [content format read/writer] sources were re-organized into single
.c/h files per content formatter.
- [content format read/writer] sources were re-written where necessary
to remove the sharing of the lwm2m engine's context and instead only
requires the path and input or output data specific to it's
function.
- [LwM2M objects] re-written using the new engine's abstractions
Signed-off-by: Michael Scott <michael.scott@linaro.org>
In the 08 Feb 2017 V1.0 LwM2M specification page 80 mentions: in
response to a "Notify" operation for which it is not interested in
any more, the LwM2M Server can send a "Reset Message".
Leshan server sends this CoAP RST response and it does not contain
the originating message token (which is also how the packet flow looks
on page 81 of the LwM2M spec). Using the current ZoAP sources, the
client has no way of matching back to observation which needs to be
cancelled.
Let's add a match for message ID of a reply where there is no token
to handle this case.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
[ricardo.salveti@linaro.org: Handle both piggybackend and separate
response (id doesn't need to match, only token).]
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
For an accepted socket, we should set our receive callback and start
to queue packets ASAP (in the accept callback itself). Otherwise,
(if done in accept() call like before) we may miss to queue some
packets.
This issue wasn't exposed with slow SLIP and with emulated QEMU, but
easily exposed with Ethernet on a real hardware.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
We need to define __LINUX_ERRNO_EXTENSIONS__ if newlib is being
used otherwise there is a compile error about ESHUTDOWN errno
value missing.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
- Fix typo'd "&&" when checking bit value
- Don't use NET_EVENT_IPV6_ADDR_ADD for checking mask value
due to combination of bits: _NET_EVENT_IPV6_BASE |
NET_EVENT_IPV6_CMD_ADDR_ADD
Instead use NET_EVENT_IPV6_CMD_ADDR_ADD so the check works
when NET_EVENT_IPV6_ROUTER_ADD is enabled.
Tested fix with echo_server on x86 qemu where it was previously
broken.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Coverity complains about non-checked return values here. This is false
positive as the return values do not need checking in this special
case because we are closing the socket.
Coverity-CID: 173646
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It is be possible that the local address was not properly
resolved in which case the local_addr variable could be NULL.
This will cause NULL pointer access if the variable is used.
Coverity-CID: 173656
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As we buffer incoming packets in receive callbacks, we must decrease
receive window to avoid situation that incoming stream for one socket
uses up all buffers in the system and causes deadlock. Once user app
consumes queued data using recv() call, we increase window again.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This enables IPSP node role which requires IPSS GATT service to be
registered.
Jira: ZEP-2451
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some network interfaces such as bluetooth 6lowpan can start without
an assigned IP address and then later once the connection is up a
router advertisement broadcast will assign the IP address.
The net_app framework will timeout out during network init if a value
cannot be parsed from CONFIG_NET_APP_MY_IPV6_ADDR. Let's adjust
the framework to handle a missing value there and fill it in later
when the IPv6 address is added to the interface.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
ReST defines interpreted text roles where text enclosed by single quotes
can be "intrepreted", for example :ref:`some name` becomes a link to
a label anywhere in the doc set named "some name", :c:func:`funcname()`
becomes a link to the API documentation for "funcname", and
:option:`CONFIG_NAME` becomes a link to, in our case, the documentation
for the generated Kconfig option.
This patch fixes uses of `some name` (without a role) by either adding
an explicit role, or changing to ``some name``, which indicates inline
code block formatting (most likely what was intended).
This is a precursor to changing the default behavior of interpreted
text to treat `some name` as :any:`some name` (as configured in
doc/conf.py), which would attempt to create a link to any available
definition of "some name".
We may not change this default role behavior, but it becomes an option
after the fixes in this patch. In any case, this patch fixes incorrect
uses of single-quoted text (possibly introduced because GitHub's
markdown language uses single-quoted text for inline code formatting).
Jira: ZEP-2414
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Historically, stacks were just character buffers and could be treated
as such if the user wanted to look inside the stack data, and also
declared as an array of the desired stack size.
This is no longer the case. Certain architectures will create a memory
region much larger to account for MPU/MMU guard pages. Unfortunately,
the kernel interfaces treat both the declared stack, and the valid
stack buffer within it as the same char * data type, even though these
absolutely cannot be used interchangeably.
We introduce an opaque k_thread_stack_t which gets instantiated by
K_THREAD_STACK_DECLARE(), this is no longer treated by the compiler
as a character pointer, even though it really is.
To access the real stack buffer within, the result of
K_THREAD_STACK_BUFFER() can be used, which will return a char * type.
This should catch a bunch of programming mistakes at build time:
- Declaring a character array outside of K_THREAD_STACK_DECLARE() and
passing it to K_THREAD_CREATE
- Directly examining the stack created by K_THREAD_STACK_DECLARE()
which is not actually the memory desired and may trigger a CPU
exception
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add API that allows net-shell to get net_app context information
that can be used to debug net_app connections.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit adds http_client_set_net_pkt_pool() function that allows
caller to define net_buf pool that is used when sending a TCP packet.
This is needed for those technologies like Bluetooth or 802.15.4 which
compress the IPv6 header during send.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit adds http_server_set_net_pkt_pool() function that allows
caller to define net_buf pool that is used when sending a TCP packet.
This is needed for those technologies like Bluetooth or 802.15.4 which
compress the IPv6 header during send.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
CONFIG_MQTT_LIB_TLS is introduced to enable TLS support.
Also, prj_frdm_k64f_tls.conf is added to demostrate the whole idea.
jira:ZEP-2261
Signed-off-by: Aska Wu <aska.wu@linaro.org>
Use net app API since we want to enable MQTT with TLS.
mqtt_connect() and mqtt_close() are added to build and close the
connection to the broker. The caller doesn't need to deal with
the net context anymore and the most of network setup code in
mqtt_publisher is removed.
Signed-off-by: Aska Wu <aska.wu@linaro.org>
