To allow hardware crypto acceleration custom mbedtls library needs to be
prepared. However current implementation forces the default library to
be used.
This patch allows not using the default library and passing custom
mbedtls target to use with openthread.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
The Z_STRUCT_SECTION_ITERABLE() provides an alignment so remove
the 32 byte alignment for net_if and ppp_protocol_handler structs.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use system provided Z_STRUCT_SECTION_FOREACH() and
Z_STRUCT_SECTION_ITERABLE() macros instead of manually coding
everything for network sections.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Different switch was used for build to allow including all shim body
in zephyr without the need for building openthread from this repo. This
allows developer to include custom OpenThread sources as part of the
application.
This change is needed as Thread is a subject of certification and
sources provided by zephyr may not necesairly pass certification or be
precertified. User is allowed to use certified OpenThread version
this way.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
When this happens, ip6_addr_cb and ipv6_addr_event_handler() both look
unused, since they are passed to macros which discard them.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Single work object for whole fsm was not being able to handle more than
single packet at a time. Because of that we have overwritten already
scheduled packets, resulting in fsm timeout and net_pkt leak.
Use net_pkt work object instead, so we can safely schedule more than a
single packet.
This commit also drops workaround for qemu_x86 unit testing.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Currently there is a single function that handles both Configure-Ack and
Configure-Rej messages. This is obviously wrong for Configure-Rej,
because implementation applies options received in the message.
Remove Configure-Rej callback, so those frames are simply ignored for
the time no valid handling code exists.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Clear negotiated options in protocol down handler. That way all
addresses are properly requested (by sending 0.0.0.0 in Configure-Req)
in the subsequent option negotiation phases.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Unit tests were failing to build because random header was included by
kernel_includes.h. The problem is that rand32.h includes a generated
file that is either not generated or not included when building unit
tests. Also, it is better to limit the scope of this file to where it is
used.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
There is already a variable 'network_protos_up', which stores number of
network protocols being up. Additionally each network protocol has its
own state represented by is_ip{,v6}cp_up. Use the latter in FSM up() and
down() callbacks.
This fixes a case when both IPCP and IPv6CP protocols are going
down. When using ctx->is_network_up only one of them (the first) was
deinitialized correctly, second stayed always up (at least partially,
e.g. not calling ppp_network_down()).
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Each PPP packet sent on wire needs to have at least 4 bytes length. Set
that length for outgoing Term-Req and Term-Ack packets. Also update
length validation to check for at least 4 bytes instead of at least 1
byte.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
It fixes #issues/26220.
openthread_start function is called when L2 enable(iface, true) is
called. openthread_stop is called when L2 enable(iface, false) is
called. openthread_stop makes the device to leave the OpenThread
network.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
OpenThread BR can assign addresses via DHCPv6 or when acting as an
NCP, addresses can be added manually. Currently, those addresses are
handled in the same way as auto-configured addresses.
This patch maps the newly introduced mAddressOrigin of otNetifAddress to
Zephyr's net_addr_type.
This way an application can register a handler and differentiate by type
of assignment:
```
static void handler(struct net_mgmt_event_callback *cb,
u32_t mgmt_event,
struct net_if *iface)
{
if (iface->config.ip.ipv6->unicast[i].addr_type == NET_ADDR_DHCP) {
}
}
```
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
Some options were available in the options.cmake but were not reflected
in Kconfig.
Added possibility to enable additional configuration options for OT.
Some of the options were left commented out as those options are not
yet supported e.g. require Thread 1.2 or require shim changes.
As openthread has gazillion configuration options that are passed as
define value, created generic option for passing any number of those
values separated with space.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
Currently user needs to specify quite much additional options to enable
OpenThread support. He also needs to set ip address count,
heap size, etc depending on features enabled.
Nade changes to automatically select/set some of the options on
enabling OpenThread
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
Both ASYNC_CTRL_CHAR_MAP and MAGIC_NUMBER are not supported right
now. Send Configure-Reject for them instead of Configure-Nak, as we
don't even propose new values in reply (which should be part of
Configure-Nak).
Send also Configure-Reject for MRU option, as we don't respect it
either.
Drop both count_rej and count_nack, as we can rely solely on nack_idx to
send Configure-Reject or not.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
The sync receive timeout was using invalid value (nanoseconds
instead of milliseconds). This caused unnecessary state switches
from SLAVE to MASTER and back.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add debug prints when the port announce information state
machine state changes. This is useful in debugging.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The port number is stored starting from 0 in Ethernet context.
But in gPTP, it is an index which starts from 1. So increase
the value by 1 for a value returned from Ethernet context.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It may be useful for the application to register its own callback for
ot state changed event which does not override the current one.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
It may be useful to start openthread manually but with default
network settings. For instance when the application wants to register
ot state changed callback which should be done before openthread
starts.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
OpenThread API is not thread-safe.
Moved creation of otMessage to the Thread task and created api
for passing it properly.
This way it should be less possible for an issue to occure eg.
during message buffer allocation.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
Avoid null pointer access by checking that Ethernet device has
PTP clock before trying to get the actual PTP clock device.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It add an option to configure openthread thread priority class
by the application if there is a such need.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Net pkt is added into the ot net list after queued net pkt into
the net_rx which bases on it. It affects in losting net pkt when for
instance ot thread is preemptive.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
The eth_stats_update_errors_rx() implicitly assumes that passed pointer
to struct net_if is not NULL.
This is not true for MCUX's eth_rx() (in eth_mcux.c), where we can
execute eth_stats_update_errors_rx() after net_recv_data() returning
-EINVAL because of passed NULL iface pointer.
This change fixes this problem with adding extra check on iface not
being NULL before it is dereferenced.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Right now shell pointer is not assigned before doing a scan, so scan
results are printed using printk(). Save shell instance in context, so
results are printed using shell_fprintf(), thus better aligned in the
console output.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Some radio drivers need configuration before start-up. Up to now only
the RF2XX drivers allowed this, but other radio drivers need this as
well. In particular for setting EUI64 addresses.
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
Due to new checks in mbedTLS config sanitizer, TLS option can no longer
be left enabled, when TLS is not used. OpenThread needs MBEDTLS_MD_C
and MBEDTLS_CIPHER_C even without TLS being used, so we need an option
to enable them manually.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
OpenThread moved from 4 to 5 debug levels and it was not possible
to configure all of them with Kconfig.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
The LLDP packet was created but its type was not set to LLDP
and was sent as ARP message.
Fixes#25084
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add OpenThread configuration option, which allows to configure and start
OpenThread stack operation manually. This mode should be used in NCP
devices, as well as is needed for certification purposes, where
OpenTread stack have to be configured by the test framework and not
initialize and join the network on its own.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Frame format was validated, but its length should be also validated
relevantly against the format.
Fixes#24970
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Convert all canbus related API/samples/tests/subsys
to the new timeout API with k_timeout_t.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
There was no way to use Openthread CoAP api in zephyr application so
far. These changes enable the feature. Now you can fully use CoAP
communication in an application working in Thread network.
Signed-off-by: Lukasz Maciejonczyk <Lukasz.Maciejonczyk@nordicsemi.no>
Received frames shall be handled in the OpenThread thread, not in
the receiver thread.
Passed received frame to the function that will handle it in a proper
thread instead of calling otPlatRadioReceiveDone directly.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
