boards: arm: add support for die_temp_polling sample for stm32 boards

Add die_temp0 alias for all the STM32 boards that already enable the
temperature sensor so that the die_temp_polling samples can be used.
Also enable die_temp for two boards that are supported by the
stm32_temp_sensor sample.

Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>

boards/arm/b_u585i_iot02a/b_u585i_iot02a-common.dtsi

@@ -33,6 +33,7 @@
 	aliases {
 		watchdog0 = &iwdg;
 		spi-flash0 = &mx25lm51245;
+		die-temp0 = &die_temp;
 	};
 };
 

boards/arm/nucleo_f091rc/nucleo_f091rc.dts

@@ -51,6 +51,7 @@
 		sw0 = &user_button;
 		pwm-led0 = &green_pwm_led;
 		watchdog0 = &iwdg;
+		die-temp0 = &die_temp;
 	};
 };
 

boards/arm/nucleo_f103rb/nucleo_f103rb.dts

@@ -40,6 +40,7 @@
 		led0 = &green_led_2;
 		sw0 = &user_button;
 		watchdog0 = &iwdg;
+		die-temp0 = &die_temp;
 	};
 };
 

boards/arm/nucleo_f207zg/nucleo_f207zg.dts

@@ -73,6 +73,7 @@
 		red-pwm-led = &red_pwm_led;
 		sw0 = &user_button;
 		watchdog0 = &iwdg;
+		die-temp0 = &die_temp;
 	};
 };
 

boards/arm/nucleo_f401re/nucleo_f401re.dts

@@ -50,6 +50,7 @@
 		sw0 = &user_button;
 		pwm-led0 = &green_pwm_led;
 		watchdog0 = &wwdg;
+		die-temp0 = &die_temp;
 	};
 };
 

boards/arm/nucleo_f429zi/nucleo_f429zi.dts

@@ -52,6 +52,7 @@
 		led2 = &red_led_1;
 		sw0 = &user_button;
 		watchdog0 = &iwdg;
+		die-temp0 = &die_temp;
 	};
 };
 

boards/arm/nucleo_f746zg/nucleo_f746zg.dts

@@ -59,6 +59,7 @@
 		led2 = &red_led;
 		sw0 = &user_button;
 		watchdog0 = &iwdg;
+		die-temp0 = &die_temp;
 	};
 };
 

boards/arm/nucleo_g070rb/nucleo_g070rb.dts

@@ -41,6 +41,7 @@
 		led0 = &green_led_1;
 		sw0 = &user_button;
 		watchdog0 = &iwdg;
+		die-temp0 = &die_temp;
 	};
 };
 

boards/arm/nucleo_g071rb/nucleo_g071rb.dts

@@ -42,6 +42,7 @@
 		led0 = &green_led_1;
 		sw0 = &user_button;
 		watchdog0 = &iwdg;
+		die-temp0 = &die_temp;
 	};
 };
 

boards/arm/nucleo_g0b1re/nucleo_g0b1re.dts

@@ -43,6 +43,7 @@
 		led0 = &green_led_1;
 		sw0 = &user_button;
 		watchdog0 = &iwdg;
+		die-temp0 = &die_temp;
 	};
 };
 

boards/arm/nucleo_g474re/nucleo_g474re.dts

@@ -56,6 +56,7 @@
 		pwm-led0 = &green_pwm_led;
 		sw0 = &user_button;
 		watchdog0 = &iwdg;
+		die-temp0 = &die_temp;
 	};
 };
 

boards/arm/nucleo_h743zi/nucleo_h743zi.dts

@@ -57,6 +57,7 @@
 		pwm-led0 = &red_pwm_led;
 		sw0 = &user_button;
 		watchdog0 = &iwdg;
+		die-temp0 = &die_temp;
 	};
 };
 

boards/arm/nucleo_l073rz/nucleo_l073rz.dts

@@ -61,6 +61,7 @@
 		pwm-led0 = &green_pwm_led;
 		watchdog0 = &iwdg;
 		eeprom-0 = &eeprom;
+		die-temp0 = &die_temp;
 	};
 };
 

boards/arm/nucleo_l552ze_q/nucleo_l552ze_q-common.dtsi

@@ -32,6 +32,10 @@
 			gpios = <&gpioc 13 GPIO_ACTIVE_HIGH>;
 		};
 	};
+
+	aliases {
+		die-temp0 = &die_temp;
+	};
 };
 
 &clk_hsi48 {

boards/arm/nucleo_wb55rg/nucleo_wb55rg.dts

@@ -61,6 +61,7 @@
 		sw1 = &user_button_2;
 		sw2 = &user_button_3;
 		watchdog0 = &iwdg;
+		die-temp0 = &die_temp;
 	};
 };
 

boards/arm/nucleo_wl55jc/nucleo_wl55jc.dts

@@ -60,6 +60,7 @@
 		sw2 = &user_button_3;
 		lora0 = &lora;
 		watchdog0 = &iwdg;
+		die-temp0 = &die_temp;
 	};
 };
 

boards/arm/stm32f103_mini/stm32f103_mini.dts

@@ -30,6 +30,7 @@
 	aliases {
 		led0 = &green_led_1;
 		watchdog0 = &iwdg;
+		die-temp0 = &die_temp;
 	};
 };
 
@@ -129,3 +130,7 @@ zephyr_udc0: &usb {
 	pinctrl-names = "default";
 	status = "okay";
 };
+
+&die_temp {
+	status = "okay";
+};

boards/arm/stm32f3_disco/stm32f3_disco.dts

@@ -71,6 +71,7 @@
 		magn0 = &lsm303dlhc_magn;
 		watchdog0 = &iwdg;
 		accel0 = &lsm303dlhc_accel;
+		die-temp0 = &die_temp;
 	};
 };
 

boards/arm/stm32l562e_dk/stm32l562e_dk_common.dtsi

@@ -31,6 +31,7 @@
 
 	aliases {
 		spi-flash0 = &mx25lm51245;
+		die-temp0 = &die_temp;
 	};
 };
 
@@ -204,6 +205,10 @@
 	status = "okay";
 };
 
+&die_temp {
+	status = "okay";
+};
+
 &spi3 {
 	pinctrl-0 = <&spi3_sck_pg9 &spi3_mosi_pb5 &spi3_miso_pb4>;
 	pinctrl-names = "default";