michaelh/zephyr
1
0
Fork 0
Code Releases Activity

adc: improvements to the adc sample code.

Browse source 
- Sample application now pulls data continuously.
- Adds information on the arduino analog input pins and ADC channels.
- CHANNEL is defined as a macro.
- BUFFER_SIZE is defined as a macro.
- Sets the sample to run on repetitive mode on ARC architectures
  (applies to Arduino 101 ADC).

Change-Id: I6201fea3a98b5394c05eb3ac570793629431ac02
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit is contained in:
Juan Manuel Cruz 2016-01-14 12:57:05 -06:00 • committed by Anas Nashif
commit fed390316f
2 changed files with 36 additions and 13 deletions
Download patch file Download diff file Expand all files Collapse all files

1
samples/nanokernel/apps/adc/prj_arc.conf
View file

@ -1,4 +1,5 @@
CONFIG_ADC=y
CONFIG_ADC_DW=y
CONFIG_ADC_DW_0=y
CONFIG_ADC_DW_REPETITIVE=y
CONFIG_NUM_IRQS=20

48
samples/nanokernel/apps/adc/src/adc.c
View file

@ -30,18 +30,34 @@
#define DBG printk
#endif
#define SLEEPTIME 2
#define SLEEPTICKS (SLEEPTIME * sys_clock_ticks_per_sec)
#ifdef CONFIG_SOC_QUARK_SE_SS
#define ADC_DEVICE_NAME CONFIG_ADC_DW_NAME_0
#elif CONFIG_BOARD_GALILEO
#define ADC_DEVICE_NAME CONFIG_ADC_TI_ADC108S102_0_DRV_NAME
#endif
static uint8_t seq_buffer[100];
/*
* The analog input pin and channel number mapping
* for Arduino 101 board.
* A0 Channel 10
* A1 Channel 11
* A2 Channel 12
* A3 Channel 13
* A4 Channel 14
*/
#define CHANNEL 10
#define BUFFER_SIZE 40
static uint8_t seq_buffer[BUFFER_SIZE];
static struct adc_seq_entry sample = {
.sampling_delay = 1,
.channel_id = 0,
.sampling_delay = 12,
.channel_id = CHANNEL,
.buffer = seq_buffer,
.buffer_length = 100,
.buffer_length = BUFFER_SIZE,
};
static struct adc_seq_table table = {
@ -52,14 +68,17 @@ static struct adc_seq_table table = {
static void _print_sample_in_hex(uint8_t *buf, uint32_t length)
{
DBG("Buffer content:\n");
for (; length > 0; length -= 2, buf += 2) {
DBG("0x%x ", *((uint16_t *)buf));
for (; length > 0; length -= 4, buf += 4) {
DBG("0x%x ", *((uint32_t *)buf));
}
DBG("\n");
}
void main(void)
{
struct device *adc;
struct nano_timer timer;
uint32_t data[2] = {0, 0};
DBG("ADC sample started on %s\n", ADC_DEVICE_NAME);
@ -69,14 +88,17 @@ void main(void)
return;
}
nano_timer_init(&timer, data);
adc_enable(adc);
if (adc_read(adc, &table) != DEV_OK) {
DBG("Sampling could not proceed, an error occurred\n");
} else {
DBG("Sampling is done\n");
_print_sample_in_hex(seq_buffer, 100);
while (1) {
if (adc_read(adc, &table) != DEV_OK) {
DBG("Sampling could not proceed, an error occurred\n");
} else {
DBG("Sampling is done\n");
_print_sample_in_hex(seq_buffer, BUFFER_SIZE);
}
nano_timer_start(&timer, SLEEPTICKS);
nano_timer_test(&timer, TICKS_UNLIMITED);
}
adc_disable(adc);
}