boards: nrf52833_pca10100: Rename to nrf52833dk_nrf52833

The board name for the nRF52833 DK, so far known as nrf52833_pca10100,
is renamed to nrf52833dk_nrf52833. Its documentation and all
references to its name in the tree are updated accordingly.
Overlay and configuration files specific to this board are also
renamed, to match the new board name.

Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>

boards/arm/nrf52833dk_nrf52833/Kconfig

@@ -1,4 +1,4 @@
-# nRF52833 PCA10100 board configuration
+# nRF52833 DK NRF52833 board configuration
 
 # Copyright (c) 2019 Nordic Semiconductor ASA
 # SPDX-License-Identifier: Apache-2.0
@@ -7,4 +7,4 @@ config BOARD_ENABLE_DCDC
 	bool "Enable DCDC mode"
 	select SOC_DCDC_NRF52X
 	default y
-	depends on BOARD_NRF52833_PCA10100
+	depends on BOARD_NRF52833DK_NRF52833

boards/arm/nrf52833dk_nrf52833/Kconfig.board

@@ -1,8 +1,8 @@
-# nRF52833 PCA10100 board configuration
+# nRF52833 DK NRF52833 board configuration
 
 # Copyright (c) 2019 Nordic Semiconductor ASA
 # SPDX-License-Identifier: Apache-2.0
 
-config BOARD_NRF52833_PCA10100
-	bool "NRF52833 PCA10100"
+config BOARD_NRF52833DK_NRF52833
+	bool "NRF52833 DK NRF52833"
 	depends on SOC_NRF52833_QIAA

boards/arm/nrf52833dk_nrf52833/Kconfig.defconfig

@@ -1,12 +1,12 @@
-# nRF52833 PCA10100 board configuration
+# nRF52833 DK NRF52833 board configuration
 
 # Copyright (c) 2019 Nordic Semiconductor ASA
 # SPDX-License-Identifier: Apache-2.0
 
-if BOARD_NRF52833_PCA10100
+if BOARD_NRF52833DK_NRF52833
 
 config BOARD
-	default "nrf52833_pca10100"
+	default "nrf52833dk_nrf52833"
 
 config ADC_0
 	default y
@@ -33,4 +33,4 @@ config IEEE802154_NRF5
 config BT_CTLR
 	default BT
 
-endif # BOARD_NRF52833_PCA10100
+endif # BOARD_NRF52833DK_NRF52833

boards/arm/nrf52833dk_nrf52833/doc/index.rst

@@ -1,12 +1,12 @@
-.. _nrf52833_pca10100:
+.. _nrf52833dk_nrf52833:
 
-nRF52833-PCA10100
-#################
+nRF52833 DK
+###########
 
 Overview
 ********
 
-The nRF52833 Preview Development Kit (PCA10100) hardware provides
+The nRF52833 Development Kit (PCA10100) hardware provides
 support for the Nordic Semiconductor nRF52833 ARM Cortex-M4F CPU and
 the following devices:
 
@@ -27,20 +27,24 @@ the following devices:
 * :abbr:`WDT (Watchdog Timer)`
 
 More information about the board can be found at the
-`nRF52833 PDK website`_. The `Nordic Semiconductor Infocenter`_
+`nRF52833 DK website`_. The `Nordic Semiconductor Infocenter`_
 contains the processor's information and the datasheet.
 
+.. note::
+
+   In previous Zephyr releases this board was named *nrf52833_pca10100*.
+
 Hardware
 ********
 
-nRF52833 PDK has two external oscillators. The frequency of
+nRF52833 DK has two external oscillators. The frequency of
 the slow clock is 32.768 kHz. The frequency of the main clock
 is 32 MHz.
 
 Supported Features
 ==================
 
-The nrf52833_pca10100 board configuration supports the following
+The nrf52833dk_nrf52833 board configuration supports the following
 hardware features:
 
 +-----------+------------+----------------------+
@@ -79,7 +83,7 @@ hardware features:
 +-----------+------------+----------------------+
 
 Other hardware features are not supported by the Zephyr kernel.
-See `nRF52833 PDK website`_ and `Nordic Semiconductor Infocenter`_
+See `nRF52833 DK website`_ and `Nordic Semiconductor Infocenter`_
 for a complete list of nRF52833 Development Kit board hardware features.
 
 Connections and IOs
@@ -105,7 +109,7 @@ Push buttons
 Programming and Debugging
 *************************
 
-Applications for the ``nrf52833_pca10100`` board configuration can be
+Applications for the ``nrf52833dk_nrf52833`` board configuration can be
 built and flashed in the usual way (see :ref:`build_an_application`
 and :ref:`application_run` for more details); however, the standard
 debugging targets are not currently available.
@@ -134,7 +138,7 @@ Then build and flash the application in the usual way.
 
 .. zephyr-app-commands::
    :zephyr-app: samples/hello_world
-   :board: nrf52833_pca10100
+   :board: nrf52833dk_nrf52833
    :goals: build flash
 
 Debugging
@@ -144,8 +148,8 @@ Refer to the :ref:`nordic_segger` page to learn about debugging Nordic boards wi
 Segger IC.
 
 
-Testing the LEDs and buttons in the nRF52833 PDK
-************************************************
+Testing the LEDs and buttons in the nRF52833 DK
+***********************************************
 
 There are 2 samples that allow you to test that the buttons (switches) and LEDs on
 the board are working properly with Zephyr:
@@ -155,7 +159,7 @@ the board are working properly with Zephyr:
 
 You can build and flash the examples to make sure Zephyr is running correctly on
 your board. The button and LED definitions can be found in
-:zephyr_file:`boards/arm/nrf52833_pca10100/nrf52833_pca10100.dts`.
+:zephyr_file:`boards/arm/nrf52833dk_nrf52833/nrf52833dk_nrf52833.dts`.
 
 Using UART1
 ***********
@@ -167,7 +171,7 @@ more than one UART for connecting peripheral devices:
 
    .. code-block:: console
 
-      $ cat nrf52833_pca10100.overlay
+      $ cat nrf52833dk_nrf52833.overlay
       &uart1 {
         compatible = "nordic,nrf-uarte";
         current-speed = <115200>;
@@ -211,7 +215,7 @@ References
 
 .. target-notes::
 
-.. _nRF52833 PDK website: https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52833-DK
+.. _nRF52833 DK website: https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52833-DK
 .. _Nordic Semiconductor Infocenter: https://infocenter.nordicsemi.com
 .. _J-Link Software and documentation pack: https://www.segger.com/jlink-software.html
 .. _nRF52833 Product Specification: https://infocenter.nordicsemi.com/pdf/nRF52833_OPS_v0.7.pdf

boards/arm/nrf52833dk_nrf52833/nrf52833dk_nrf52833.dts

@@ -8,8 +8,8 @@
 #include <nordic/nrf52833_qiaa.dtsi>
 
 / {
-	model = "Nordic PCA10100 Dev Kit";
-	compatible = "nordic,pca10100-dk", "nordic,nrf52833-qiaa",
+	model = "Nordic nRF52833 DK NRF52833";
+	compatible = "nordic,nrf52833-dk-nrf52833", "nordic,nrf52833-qiaa",
 		     "nordic,nrf52833";
 
 	chosen {

boards/arm/nrf52833dk_nrf52833/nrf52833dk_nrf52833.yaml

@@ -1,5 +1,5 @@
-identifier: nrf52833_pca10100
-name: nRF52833-PCA10100
+identifier: nrf52833dk_nrf52833
+name: nRF52833-DK-NRF52833
 type: mcu
 arch: arm
 toolchain:

boards/arm/nrf52833dk_nrf52833/nrf52833dk_nrf52833_defconfig

@@ -2,7 +2,7 @@
 
 CONFIG_SOC_SERIES_NRF52X=y
 CONFIG_SOC_NRF52833_QIAA=y
-CONFIG_BOARD_NRF52833_PCA10100=y
+CONFIG_BOARD_NRF52833DK_NRF52833=y
 
 # Enable MPU
 CONFIG_ARM_MPU=y

boards/deprecated.cmake

@@ -12,6 +12,7 @@ set(nrf51_pca10028_DEPRECATED nrf51dk_nrf51422)
 set(nrf51_pca10031_DEPRECATED nrf51dongle_nrf51422)
 set(nrf52_pca10040_DEPRECATED nrf52dk_nrf52832)
 set(nrf52810_pca10040_DEPRECATED nrf52dk_nrf52810)
+set(nrf52833_pca10100_DEPRECATED nrf52833dk_nrf52833)
 set(nrf52840_pca10056_DEPRECATED nrf52840dk_nrf52840)
 set(nrf52811_pca10056_DEPRECATED nrf52840dk_nrf52811)
 set(nrf9160_pca10090_DEPRECATED nrf9160dk_nrf9160)

tests/drivers/adc/adc_api/src/test_adc.c

@@ -44,7 +44,7 @@
 	defined(CONFIG_BOARD_NRF52840_PCA10059) || \
 	defined(CONFIG_BOARD_NRF52840_BLIP) || \
 	defined(CONFIG_BOARD_NRF52840_PAPYR) || \
-	defined(CONFIG_BOARD_NRF52833_PCA10100) || \
+	defined(CONFIG_BOARD_NRF52833DK_NRF52833) || \
 	defined(CONFIG_BOARD_BL652_DVK) || \
 	defined(CONFIG_BOARD_BL654_DVK) || \
 	defined(CONFIG_BOARD_DEGU_EVK) || \

tests/drivers/counter/counter_basic_api/boards/nrf52833dk_nrf52833.overlay

@@ -21,4 +21,3 @@
 &rtc0 {
 	ppi-wrap;
 };
-