dts: Rename DT_HAS_NODE macro to DT_HAS_NODE_STATUS_OKAY

Rename DT_HAS_NODE to DT_HAS_NODE_STATUS_OKAY so the semantics are
clear.  As going forward DT_HAS_NODE will report if a NODE exists
regardless of its status.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit is contained in:
Kumar Gala 2020-05-05 13:55:28 -05:00 committed by Kumar Gala
commit fdd85d5ad7
166 changed files with 883 additions and 872 deletions

View file

@ -20,7 +20,7 @@ LOG_MODULE_REGISTER(sdhc_spi, CONFIG_DISK_LOG_LEVEL);
/* Clock speed used after initialisation */
#define SDHC_SPI_SPEED 4000000
#if !DT_HAS_NODE(DT_INST(0, zephyr_mmc_spi_slot))
#if !DT_HAS_NODE_STATUS_OKAY(DT_INST(0, zephyr_mmc_spi_slot))
#warning NO SDHC slot specified on board
#else
struct sdhc_spi_data {

View file

@ -2705,7 +2705,7 @@ static int usdhc_access_init(const struct device *dev)
(void)k_mutex_lock(&z_usdhc_init_lock, K_FOREVER);
memset((char *)priv, 0, sizeof(struct usdhc_priv));
#if DT_HAS_NODE(DT_INST(0, nxp_imx_usdhc))
#if DT_HAS_NODE_STATUS_OKAY(DT_INST(0, nxp_imx_usdhc))
if (!strcmp(dev->config->name, DT_LABEL(DT_INST(0, nxp_imx_usdhc)))) {
priv->host_config.base =
(USDHC_Type *)DT_REG_ADDR(DT_INST(0, nxp_imx_usdhc));
@ -2721,7 +2721,7 @@ static int usdhc_access_init(const struct device *dev)
}
#endif
#if DT_HAS_NODE(DT_INST(1, nxp_imx_usdhc))
#if DT_HAS_NODE_STATUS_OKAY(DT_INST(1, nxp_imx_usdhc))
if (!strcmp(dev->config->name, DT_LABEL(DT_INST(1, nxp_imx_usdhc)))) {
priv->host_config.base =
(USDHC_Type *)DT_REG_ADDR(DT_INST(1, nxp_imx_usdhc));
@ -2876,7 +2876,7 @@ static int disk_usdhc_init(struct device *dev)
#ifdef CONFIG_DISK_ACCESS_USDHC1
static struct usdhc_priv usdhc_priv_1;
#if DT_HAS_NODE(DT_INST(0, nxp_imx_usdhc))
#if DT_HAS_NODE_STATUS_OKAY(DT_INST(0, nxp_imx_usdhc))
DEVICE_AND_API_INIT(usdhc_dev1,
DT_LABEL(DT_INST(0, nxp_imx_usdhc)), disk_usdhc_init,
&usdhc_priv_1, NULL, APPLICATION,
@ -2889,7 +2889,7 @@ DEVICE_AND_API_INIT(usdhc_dev1,
#ifdef CONFIG_DISK_ACCESS_USDHC2
static struct usdhc_priv usdhc_priv_2;
#if DT_HAS_NODE(DT_INST(1, nxp_imx_usdhc))
#if DT_HAS_NODE_STATUS_OKAY(DT_INST(1, nxp_imx_usdhc))
DEVICE_AND_API_INIT(usdhc_dev2,
DT_LABEL(DT_INST(1, nxp_imx_usdhc)), disk_usdhc_init,
usdhc_priv_2, NULL, APPLICATION,