diff --git a/boards/arm/stm32f469i_disco/stm32f469i_disco.dts b/boards/arm/stm32f469i_disco/stm32f469i_disco.dts
index 636292be518..4e7c76e5a12 100644
--- a/boards/arm/stm32f469i_disco/stm32f469i_disco.dts
+++ b/boards/arm/stm32f469i_disco/stm32f469i_disco.dts
@@ -61,6 +61,28 @@ arduino_i2c: &i2c1 {};
 arduino_spi: &spi2 {};
 arduino_serial: &usart6 {};
 
+&clk_hse {
+	clock-frequency = <DT_FREQ_M(8)>;
+	status = "okay";
+};
+
+&pll {
+	div-m = <8>;
+	mul-n = <360>;
+	div-p = <2>;
+	div-q = <7>;
+	clocks = <&clk_hse>;
+	status = "okay";
+};
+
+&rcc {
+	clocks = <&pll>;
+	clock-frequency = <DT_FREQ_M(180)>;
+	ahb-prescaler = <1>;
+	apb1-prescaler = <4>;
+	apb2-prescaler = <2>;
+};
+
 &usart3 {
 	pinctrl-0 = <&usart3_tx_pb10 &usart3_rx_pb11>;
 	current-speed = <115200>;
diff --git a/boards/arm/stm32f469i_disco/stm32f469i_disco_defconfig b/boards/arm/stm32f469i_disco/stm32f469i_disco_defconfig
index 836a0026da7..9b20e78fa20 100644
--- a/boards/arm/stm32f469i_disco/stm32f469i_disco_defconfig
+++ b/boards/arm/stm32f469i_disco/stm32f469i_disco_defconfig
@@ -2,8 +2,6 @@
 
 CONFIG_SOC_SERIES_STM32F4X=y
 CONFIG_SOC_STM32F469XX=y
-# 180MHz system clock
-CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=180000000
 
 # Enable MPU
 CONFIG_ARM_MPU=y
@@ -23,19 +21,5 @@ CONFIG_PINMUX=y
 # enable GPIO
 CONFIG_GPIO=y
 
-# clock configuration
+# Enable Clocks
 CONFIG_CLOCK_CONTROL=y
-
-# Clock configuration for Cube Clock control driver
-CONFIG_CLOCK_STM32_HSE_CLOCK=8000000
-CONFIG_CLOCK_STM32_SYSCLK_SRC_PLL=y
-# use HSE as PLL input
-CONFIG_CLOCK_STM32_PLL_SRC_HSE=y
-# produce 180MHz clock at PLL output
-CONFIG_CLOCK_STM32_PLL_M_DIVISOR=8
-CONFIG_CLOCK_STM32_PLL_N_MULTIPLIER=360
-CONFIG_CLOCK_STM32_PLL_P_DIVISOR=2
-CONFIG_CLOCK_STM32_PLL_Q_DIVISOR=7
-CONFIG_CLOCK_STM32_AHB_PRESCALER=1
-CONFIG_CLOCK_STM32_APB1_PRESCALER=4
-CONFIG_CLOCK_STM32_APB2_PRESCALER=2