michaelh/zephyr
1
0
Fork 0
Code Releases Activity

drivers: pwm: pwm_nrf5_sw: Add prescaler support

Browse source 
Add support for specifying the clock prescaler value for the HF timer
used for generating the PWM signals. This allows for lower timer
frequency and thus slower PWM signals (e.g. for use as servo
controller).

Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
This commit is contained in:
Henrik Brix Andersen 2018-05-31 14:06:20 +02:00 • committed by Carles Cufí
commit fc1898ccb5
2 changed files with 29 additions and 4 deletions
Download patch file Download diff file Expand all files Collapse all files

8
drivers/pwm/pwm_nrf5_sw.c
View file

@ -17,6 +17,7 @@ struct pwm_config {
u8_t gpiote_base;
u8_t ppi_base;
u8_t map_size;
u8_t prescaler;
};
struct chan_map {
@ -143,7 +144,7 @@ static int pwm_nrf5_sw_pin_set(struct device *dev, u32_t pwm,
/* setup HF timer in 16MHz frequency */
timer->MODE = TIMER_MODE_MODE_Timer;
timer->PRESCALER = 0;
timer->PRESCALER = config->prescaler;
timer->BITMODE = TIMER_BITMODE_BITMODE_16Bit;
timer->EVENTS_COMPARE[channel] = 0;
timer->EVENTS_COMPARE[config->map_size] = 0;
@ -207,8 +208,8 @@ static int pwm_nrf5_sw_get_cycles_per_sec(struct device *dev, u32_t pwm,
config = (struct pwm_config *)dev->config->config_info;
/* HF timer frequency is derived from 16MHz source and prescaler is 0 */
*cycles = 16000000UL;
/* HF timer frequency is derived from 16MHz source with a prescaler */
*cycles = 16000000UL / BIT(config->prescaler);
return 0;
}
@ -242,6 +243,7 @@ static const struct pwm_config pwm_nrf5_sw_0_config = {
#endif
.gpiote_base = 0,
.map_size = PWM_0_MAP_SIZE,
.prescaler = CONFIG_PWM_NRF5_SW_0_CLOCK_PRESCALER,
};
#define PWM_0_DATA_SIZE (offsetof(struct pwm_data, map) + \