From f930480e165dbafa6595f200cda3d1597bc4a617 Mon Sep 17 00:00:00 2001 From: "David B. Kinder" Date: Fri, 5 May 2017 15:37:53 -0700 Subject: [PATCH] doc: misspellings in Kconfig files fix misspelling in Kconfig files that would show up in configuration documentation and screens. Signed-off-by: David B. Kinder --- drivers/clock_control/Kconfig.stm32f107xx | 4 ++-- drivers/crypto/Kconfig.ataes132a | 2 +- drivers/ethernet/Kconfig.sam_gmac | 2 +- drivers/ieee802154/Kconfig.cc2520 | 2 +- drivers/ieee802154/Kconfig.kw41z | 2 +- drivers/ieee802154/Kconfig.mcr20a | 2 +- drivers/ieee802154/Kconfig.nrf5 | 4 ++-- drivers/sensor/lis2dh/Kconfig | 2 +- drivers/spi/Kconfig.dw | 2 +- kernel/Kconfig.power_mgmt | 6 +++--- misc/Kconfig | 2 +- subsys/net/ip/l2/Kconfig | 2 +- 12 files changed, 16 insertions(+), 16 deletions(-) diff --git a/drivers/clock_control/Kconfig.stm32f107xx b/drivers/clock_control/Kconfig.stm32f107xx index f49f20022a9..bc883265c88 100644 --- a/drivers/clock_control/Kconfig.stm32f107xx +++ b/drivers/clock_control/Kconfig.stm32f107xx @@ -85,7 +85,7 @@ config CLOCK_STM32F10X_CONN_LINE_HSE_BYPASS Enable this option to bypass external high-speed clock (HSE). config CLOCK_STM32F10X_CONN_LINE_PREDIV1 - int "PREDIV1 Prescler" + int "PREDIV1 Prescaler" depends on CLOCK_CONTROL_STM32F10X_CONN_LINE && CLOCK_STM32F10X_CONN_LINE_PLL_SRC_PREDIV1 default 0 range 0 16 @@ -110,7 +110,7 @@ config CLOCK_STM32F10X_CONN_LINE_PLL2_MULTIPLIER PLL2 multiplier, allowed values: 8 - 20. PLL2 output must not exceed 72MHz. config CLOCK_STM32F10X_CONN_LINE_PREDIV2 - int "PREDIV2 Prescler" + int "PREDIV2 Prescaler" depends on CLOCK_CONTROL_STM32F10X_CONN_LINE && CLOCK_STM32F10X_CONN_LINE_PREDIV1_SRC_PLL2CLK default 0 range 0 16 diff --git a/drivers/crypto/Kconfig.ataes132a b/drivers/crypto/Kconfig.ataes132a index 68a1ea00ac9..ea1389c576d 100644 --- a/drivers/crypto/Kconfig.ataes132a +++ b/drivers/crypto/Kconfig.ataes132a @@ -28,7 +28,7 @@ config CRYPTO_ATAES132A_I2C_PORT_NAME Master I2C port name through which ATAES132A chip is accessed. config CRYPTO_ATAES132A_I2C_ADDR - hex "ATAES132A I2C addess" + hex "ATAES132A I2C address" default 0x50 help ATAES132A chip's I2C address. diff --git a/drivers/ethernet/Kconfig.sam_gmac b/drivers/ethernet/Kconfig.sam_gmac index a2cf9427c82..522f333b854 100644 --- a/drivers/ethernet/Kconfig.sam_gmac +++ b/drivers/ethernet/Kconfig.sam_gmac @@ -119,7 +119,7 @@ config ETH_SAM_GMAC_MAC_I2C_INT_ADDRESS_SIZE config ETH_SAM_GMAC_MAC_I2C_DEV_NAME string "I2C bus driver device name" help - Device name, e.g. I2C_0, of an I2C bus driver device. It is requied to + Device name, e.g. I2C_0, of an I2C bus driver device. It is required to obtain handle to the I2C device object. endif # ETH_SAM_GMAC_MAC_I2C_EEPROM diff --git a/drivers/ieee802154/Kconfig.cc2520 b/drivers/ieee802154/Kconfig.cc2520 index 57852f28865..afea5034284 100644 --- a/drivers/ieee802154/Kconfig.cc2520 +++ b/drivers/ieee802154/Kconfig.cc2520 @@ -46,7 +46,7 @@ config IEEE802154_CC2520_RX_STACK_SIZE a too little one, this option makes it easy to play with the size. config IEEE802154_CC2520_INIT_PRIO - int "CC2520 intialization priority" + int "CC2520 initialization priority" default 80 help Set the initialization priority number. Do not mess with it unless diff --git a/drivers/ieee802154/Kconfig.kw41z b/drivers/ieee802154/Kconfig.kw41z index 8071016ed39..4cdfaed7d57 100644 --- a/drivers/ieee802154/Kconfig.kw41z +++ b/drivers/ieee802154/Kconfig.kw41z @@ -17,7 +17,7 @@ config IEEE802154_KW41Z_DRV_NAME This option sets the driver name config IEEE802154_KW41Z_INIT_PRIO - int "KW41Z intialization priority" + int "KW41Z initialization priority" default 80 help Set the initialization priority number. Do not mess with it unless diff --git a/drivers/ieee802154/Kconfig.mcr20a b/drivers/ieee802154/Kconfig.mcr20a index 93cce6ac79f..bf4864a34ce 100644 --- a/drivers/ieee802154/Kconfig.mcr20a +++ b/drivers/ieee802154/Kconfig.mcr20a @@ -108,7 +108,7 @@ config IEEE802154_MCR20A_RX_STACK_SIZE a too little one, this option makes it easy to play with the size. config IEEE802154_MCR20A_INIT_PRIO - int "MCR20A intialization priority" + int "MCR20A initialization priority" default 80 help Set the initialization priority number. Do not mess with it unless diff --git a/drivers/ieee802154/Kconfig.nrf5 b/drivers/ieee802154/Kconfig.nrf5 index 834ecb38a48..1224f03a552 100644 --- a/drivers/ieee802154/Kconfig.nrf5 +++ b/drivers/ieee802154/Kconfig.nrf5 @@ -43,7 +43,7 @@ config IEEE802154_NRF5_RX_STACK_SIZE a too little one, this option makes it easy to play with the size. config IEEE802154_NRF5_INIT_PRIO - int "nRF52 IEEE 802.15.4 intialization priority" + int "nRF52 IEEE 802.15.4 initialization priority" default 80 help Set the initialization priority number. Do not mess with it unless @@ -56,7 +56,7 @@ choice IEEE802154_NRF5_CCA_MODE CCA mode config IEEE802154_NRF5_CCA_MODE_ED - bool "Energy Above Threashold" + bool "Energy Above Threshold" config IEEE802154_NRF5_CCA_MODE_CARRIER bool "Carrier Seen" diff --git a/drivers/sensor/lis2dh/Kconfig b/drivers/sensor/lis2dh/Kconfig index 9119cc771b4..7578f9ebb4a 100644 --- a/drivers/sensor/lis2dh/Kconfig +++ b/drivers/sensor/lis2dh/Kconfig @@ -196,7 +196,7 @@ choice depends on LIS2DH default LIS2DH_ODR_RUNTIME help - Initial data rate frequency of acceleration data at initialisation. + Initial data rate frequency of acceleration data at initialization. Supported values: 1Hz, 10Hz, 25Hz, 50Hz, 100Hz, 200Hz, 400Hz in all power modes 1620Hz, 5376Hz in low power mode only diff --git a/drivers/spi/Kconfig.dw b/drivers/spi/Kconfig.dw index c01e189a355..4f6e663e987 100644 --- a/drivers/spi/Kconfig.dw +++ b/drivers/spi/Kconfig.dw @@ -43,7 +43,7 @@ config SPI_DW_INTERRUPT_SEPARATED_LINES endchoice config SPI_DW_CLOCK_GATE - bool "Enable glock gating" + bool "Enable clock gating" depends on SPI_DW && SOC_QUARK_SE_C1000 select CLOCK_CONTROL default n diff --git a/kernel/Kconfig.power_mgmt b/kernel/Kconfig.power_mgmt index dc445393229..fd2058e6735 100644 --- a/kernel/Kconfig.power_mgmt +++ b/kernel/Kconfig.power_mgmt @@ -92,11 +92,11 @@ config TICKLESS_KERNEL_TIME_UNIT_IN_MICRO_SECS default 1000 depends on TICKLESS_KERNEL help - This option makes the system clock and scheduling granurality. + This option makes the system clock and scheduling granularity. The default will be one mili second. This option also determines the time unit passed in functions like _sys_soc_suspend. The value should be determined based what the timer hardware and driver - can support. Spceficying too small a time unit than what the overall + can support. Specifying too small a time unit than what the overall system speed can support would cause scheduling errors. config BUSY_WAIT_USES_ALTERNATE_CLOCK @@ -106,7 +106,7 @@ config BUSY_WAIT_USES_ALTERNATE_CLOCK help In tickless kernel mode, the system clock will be stopped when there are no timer events programmed. If the system clock is to - be used to keep time e.g. to get a delata of time cycles then it + be used to keep time e.g. to get a delta of time cycles then it needs to be turned on using provided APIs. Some platforms have alternate clocks which can be used instead. In that case this flag would be set to true. This flag would be checked before turning diff --git a/misc/Kconfig b/misc/Kconfig index 610861d44ed..876f4665075 100644 --- a/misc/Kconfig +++ b/misc/Kconfig @@ -173,7 +173,7 @@ config BOOT_TIME_MEASUREMENT config CPU_CLOCK_FREQ_MHZ int - prompt "CPU CLock Frequency in MHz" + prompt "CPU Clock Frequency in MHz" default 20 depends on BOOT_TIME_MEASUREMENT help diff --git a/subsys/net/ip/l2/Kconfig b/subsys/net/ip/l2/Kconfig index bfbf7f83457..d102314e58a 100644 --- a/subsys/net/ip/l2/Kconfig +++ b/subsys/net/ip/l2/Kconfig @@ -89,7 +89,7 @@ config NET_DEBUG_L2_BLUETOOTH Enables Bluetooth L2 output debug messages config NET_L2_BLUETOOTH_MGMT - bool "Enable Blueooth Network Management support" + bool "Enable Bluetooth Network Management support" depends on NET_L2_BLUETOOTH select NET_MGMT select NET_MGMT_EVENT