boards: shields: add g1120b0mipi watch display

Add g1120b0mipi watch display to shields. This shield is currently
supported with the RT595 and RT1170 EVK. The shield contains a 400x392
circular OLED watch display, with an integrated RM67162 display controller

Note that the touchscreen IC can be driven by the FT5336 driver, with the
following changes:

- the FT3267 reports touch data as inverted from the FT5336, so
  LVGL must be made aware of this via CONFIG_LV_Z_POINTER_KSCAN_INVERT_Y
- the FT3267 reports the X and Y coordinates as swapped from the FT5336.
  To resolve this, the RM67162 driver reports the display as rotated by
  90 degrees.

Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>

boards/arm/mimxrt1170_evk/doc/index.rst

@@ -131,7 +131,8 @@ RT1170 EVKB (`mimxrt1170_evkb_cm7/cm4`)
 | HWINFO    | on-chip    | Unique device serial number         | Supported (M7)  | Supported (M7)  |
 +-----------+------------+-------------------------------------+-----------------+-----------------+
 | DISPLAY   | on-chip    | eLCDIF; MIPI-DSI. Tested with       | Supported (M7)  | Supported (M7)  |
-|           |            | :ref:`rk055hdmipi4m` shield         |                 |                 |
+|           |            | :ref:`rk055hdmipi4m` and            |                 |                 |
+|           |            | :ref:`g1120b0mipi` shields          |                 |                 |
 +-----------+------------+-------------------------------------+-----------------+-----------------+
 | ACMP      | on-chip    | analog comparator                   | Supported       | No support      |
 +-----------+------------+-------------------------------------+-----------------+-----------------+

boards/arm/mimxrt595_evk/doc/index.rst

@@ -109,7 +109,8 @@ already supported, which can also be re-used on this mimxrt595_evk board:
 | I2S       | on-chip    | i2s                                 |
 +-----------+------------+-------------------------------------+
 | DISPLAY   | on-chip    | LCDIF; MIPI-DSI. Tested with        |
-|           |            | :ref:`rk055hdmipi4m` shield         |
+|           |            | :ref:`rk055hdmipi4m` and            |
+|           |            | :ref:`g1120b0mipi` display shields  |
 +-----------+------------+-------------------------------------+
 
 The default configuration can be found in the defconfig file:

boards/shields/g1120b0mipi/Kconfig.defconfig

@@ -0,0 +1,44 @@
+# Copyright 2023 NXP
+# SPDX-License-Identifier: Apache-2.0
+
+if SHIELD_G1120B0MIPI
+
+if LVGL
+# Enable input subsystem for FT5336 driver
+config INPUT
+	default y
+
+config INPUT_FT5336_INTERRUPT
+	default y
+
+# KSCAN subsystem must be enabled for KSCAN input shim driver
+config KSCAN
+	default y
+
+# Configure LVGL to use touchscreen with KSCAN API
+config LV_Z_POINTER_KSCAN
+	default y
+
+# Y coordinates need to be inverted for this controller. Note that
+# the RM67162 display driver also reports the display orientation as rotated
+# by 90 degrees, so LVGL will read coordinates correctly.
+config LV_Z_POINTER_KSCAN_INVERT_Y
+	default y
+
+# Swap 16 bit color setting for LVGL, to send high byte first
+config LV_COLOR_16_SWAP
+	default y
+
+config LV_Z_VDB_SIZE
+	default 16
+
+config LV_DPI_DEF
+	default 128
+
+choice LV_COLOR_DEPTH
+	default LV_COLOR_DEPTH_16
+endchoice
+
+endif # LVGL
+
+endif # SHIELD_G1120B0MIPI

boards/shields/g1120b0mipi/Kconfig.shield

@@ -0,0 +1,5 @@
+# Copyright 2023 NXP
+# SPDX-License-Identifier: Apache-2.0
+
+config SHIELD_G1120B0MIPI
+	def_bool $(shields_list_contains,g1120b0mipi)

boards/shields/g1120b0mipi/boards/mimxrt1170_evk_cm7.overlay

@@ -0,0 +1,12 @@
+/*
+ * Copyright 2023, NXP
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+&rm67162_g1120b0mipi {
+	/* R414 is not populated on this board, so LPTE signal is not
+	 * connected. remove the property from the display.
+	 */
+	/delete-property/ te-gpios;
+};

boards/shields/g1120b0mipi/boards/mimxrt1170_evkb_cm7.overlay

@@ -0,0 +1,12 @@
+/*
+ * Copyright 2023, NXP
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+&rm67162_g1120b0mipi {
+	/* R414 is not populated on this board, so LPTE signal is not
+	 * connected. remove the property from the display.
+	 */
+	/delete-property/ te-gpios;
+};

boards/shields/g1120b0mipi/doc/index.rst

@@ -0,0 +1,68 @@
+.. _g1120b0mipi:
+
+G1120B0MIPI MIPI Display
+##########################
+
+Overview
+********
+
+The G1120B0MIPI is a 1.2 inch circular AMOLED display, 390x390 pixels, with a
+1-lane MIPI interface. This display connects to the i.MX RT595 Evaluation Kit.
+
+
+More information about the shield can be found
+at the `G1120B0MIPI product page`_.
+
+This display uses a 40 pin FPC interface, which is available on many
+NXP EVKs.
+
+Pins Assignment of the G1120B0MIPI MIPI Display
+==========================================================
+
++-----------------------+------------------------+
+| FPC Connector Pin     | Function               |
++=======================+========================+
+| 1                     | LED backlight cathode  |
++-----------------------+------------------------+
+| 21                    | Controller reset       |
++-----------------------+------------------------+
+| 22                    | Controller LPTE        |
++-----------------------+------------------------+
+| 26                    | Touch ctrl I2C SDA     |
++-----------------------+------------------------+
+| 27                    | Touch ctrl I2C SCL     |
++-----------------------+------------------------+
+| 28                    | Touch ctrl reset       |
++-----------------------+------------------------+
+| 29                    | Touch ctrl interrupt   |
++-----------------------+------------------------+
+| 32                    | LCD power enable       |
++-----------------------+------------------------+
+| 34                    | Backlight power enable |
++-----------------------+------------------------+
+
+Requirements
+************
+
+This shield can only be used with a board which provides a configuration
+for the 40 pin FPC interface
+
+Programming
+***********
+
+Set ``-DSHIELD=g1120b0mipi`` when you invoke ``west build``. For
+example:
+
+.. zephyr-app-commands::
+   :zephyr-app: samples/drivers/display
+   :board: mimxrt595_evk_cm33
+   :shield: g1120b0mipi
+   :goals: build
+
+References
+**********
+
+.. target-notes::
+
+.. _G1120B0MIPI product page:
+   https://www.nxp.com/design/development-boards/i-mx-evaluation-and-development-boards/1-2-wearable-display-g1120b0mipi:G1120B0MIPI

boards/shields/g1120b0mipi/g1120b0mipi.overlay

@@ -0,0 +1,58 @@
+/*
+ * Copyright 2023, NXP
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+/{
+	aliases {
+		kscan0 = &kscan_input_g1120b0mipi;
+	};
+
+	chosen {
+		zephyr,display = &rm67162_g1120b0mipi;
+		zephyr,keyboard-scan = &kscan_input_g1120b0mipi;
+	};
+
+	en_mipi_display_g1120b0mipi: enable-mipi-display {
+		compatible = "regulator-fixed";
+		regulator-name = "en_mipi_display";
+		enable-gpios = <&nxp_mipi_connector 32 GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+	};
+};
+
+&nxp_mipi_i2c {
+	status = "okay";
+	ft3267@38 {
+		/*
+		 * Note- the actual controller present on this IC is a FT3267,
+		 * but the FT35336 driver in Zephyr supports this IC.
+		 */
+		compatible = "focaltech,ft5336";
+		reg = <0x38>;
+		int-gpios = <&nxp_mipi_connector 29 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&nxp_mipi_connector 28 GPIO_ACTIVE_HIGH>;
+		kscan_input_g1120b0mipi: kscan-input {
+			compatible = "zephyr,kscan-input";
+		};
+	};
+};
+
+&zephyr_mipi_dsi {
+	status = "okay";
+	autoinsert-eotp;
+	phy-clock = <316800000>;
+	rm67162_g1120b0mipi: rm67162@0 {
+		status = "okay";
+		compatible = "raydium,rm67162";
+		reg = <0x0>;
+		reset-gpios = <&nxp_mipi_connector 21 GPIO_ACTIVE_HIGH>;
+		bl-gpios = <&nxp_mipi_connector 0 GPIO_ACTIVE_HIGH>;
+		te-gpios = <&nxp_mipi_connector 22 GPIO_ACTIVE_HIGH>;
+		data-lanes = <1>;
+		width = <400>;
+		height = <392>;
+		pixel-format = <MIPI_DSI_PIXFMT_RGB565>;
+	};
+};