michaelh/zephyr
1
0
Fork 0
Code Releases Activity

driver: uart: npcx: Support APB clock of uart module up to 20MHz.

Browse source 
Suport npcx UART module's APB clock up to 20MHz.

Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This commit is contained in:
Mulin Chao 2021-05-04 20:45:52 -07:00 • committed by Kumar Gala
commit f7f93d2207
1 changed files with 28 additions and 7 deletions
Download patch file Download diff file Expand all files Collapse all files

35
drivers/serial/uart_npcx.c
View file

@ -55,6 +55,27 @@ struct uart_npcx_data {
(struct uart_reg *)(DRV_CONFIG(dev)->uconf.base) (struct uart_reg *)(DRV_CONFIG(dev)->uconf.base)
/* UART local functions */ /* UART local functions */
static int uart_set_npcx_baud_rate(struct uart_reg *const inst, int baud_rate,
int src_clk)
{
/* Fix baud rate to 115200 so far */
if (baud_rate == 115200) {
if (src_clk == 15000000) {
inst->UPSR = 0x38;
inst->UBAUD = 0x01;
} else if (src_clk == 20000000) {
inst->UPSR = 0x08;
inst->UBAUD = 0x0a;
} else {
return -EINVAL;
}
} else {
return -EINVAL;
}
return 0;
}
#ifdef CONFIG_UART_INTERRUPT_DRIVEN #ifdef CONFIG_UART_INTERRUPT_DRIVEN
static int uart_npcx_tx_fifo_ready(const struct device *dev) static int uart_npcx_tx_fifo_ready(const struct device *dev)
{ {
@ -352,14 +373,14 @@ static int uart_npcx_init(const struct device *dev)
LOG_ERR("Get UART clock rate error %d", ret); LOG_ERR("Get UART clock rate error %d", ret);
return ret; return ret;
} }
__ASSERT(uart_rate == 15000000, "Unsupported apb2 clock for UART!");
/* Fix baud rate to 115200 */ /* Configure baud rate */
if (data->baud_rate == 115200) { ret = uart_set_npcx_baud_rate(inst, data->baud_rate, uart_rate);
inst->UPSR = 0x38; if (ret < 0) {
inst->UBAUD = 0x01; LOG_ERR("Set baud rate %d with unsupported apb clock %d failed",
} else data->baud_rate, uart_rate);
return -EINVAL; return ret;
}
/* /*
* 8-N-1, FIFO enabled. Must be done after setting * 8-N-1, FIFO enabled. Must be done after setting