michaelh/zephyr
1
0
Fork 0
Code Releases Activity

boards: nxp: rd_rw612_bga: add support for IS66 PSRAM

Browse source 
Add support for IS66WVQ8M quadspi PSRAM on the RW612 BGA board, and
update board pin control to enable muxing PSRAM pins on the FlexSPI.

Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This commit is contained in:
Daniel DeGrasse 2024-03-22 17:01:11 +00:00 • committed by Maureen Helm
commit f63baf6044
3 changed files with 37 additions and 1 deletions
Download patch file Download diff file Expand all files Collapse all files

2
boards/nxp/rd_rw612_bga/doc/index.rst
View file

@ -45,7 +45,7 @@ Supported Features
+-----------+------------+-----------------------------------+ +-----------+------------+-----------------------------------+
| I2C | on-chip | i2c | | I2C | on-chip | i2c |
+-----------+------------+-----------------------------------+ +-----------+------------+-----------------------------------+
| FLEXSPI | on-chip | flash | | FLEXSPI | on-chip | flash/memc |
+-----------+------------+-----------------------------------+ +-----------+------------+-----------------------------------+
| TRNG | on-chip | entropy | | TRNG | on-chip | entropy |
+-----------+------------+-----------------------------------+ +-----------+------------+-----------------------------------+

16
boards/nxp/rd_rw612_bga/rd_rw612_bga-pinctrl.dtsi
View file

@ -70,5 +70,21 @@
slew-rate = "ultra"; slew-rate = "ultra";
bias-pull-down; bias-pull-down;
}; };
group2 {
pinmux = <IO_MUX_QUAD_SPI_PSRAM_IO35
IO_MUX_QUAD_SPI_PSRAM_IO36
IO_MUX_QUAD_SPI_PSRAM_IO38
IO_MUX_QUAD_SPI_PSRAM_IO39
IO_MUX_QUAD_SPI_PSRAM_IO40
IO_MUX_QUAD_SPI_PSRAM_IO41>;
slew-rate = "normal";
};
group3 {
pinmux = <IO_MUX_QUAD_SPI_PSRAM_IO37>;
slew-rate = "normal";
bias-pull-down;
};
}; };
}; };

20
boards/nxp/rd_rw612_bga/rd_rw612_bga.dtsi
View file

@ -116,6 +116,7 @@ arduino_i2c: &flexcomm2 {
ahb-cacheable; ahb-cacheable;
ahb-read-addr-opt; ahb-read-addr-opt;
rx-clock-source = <1>; rx-clock-source = <1>;
rx-clock-source-b = <3>;
pinctrl-0 = <&pinmux_flexspi>; pinctrl-0 = <&pinmux_flexspi>;
pinctrl-names = "default"; pinctrl-names = "default";
status = "okay"; status = "okay";
@ -156,6 +157,25 @@ arduino_i2c: &flexcomm2 {
}; };
}; };
}; };
is66wvq8m4: is66wvq8m4@2 {
compatible = "nxp,imx-flexspi-is66wvq8m4";
/* IS66WVQ8M4 is 4MB, 32MBit pSRAM */
size = <DT_SIZE_M(32)>;
reg = <2>;
spi-max-frequency = <256000000>;
/* PSRAM cannot be enabled while board is in default XIP
* configuration, as it will conflict with flash chip.
*/
status = "disabled";
cs-interval-unit = <1>;
cs-interval = <5>;
cs-hold-time = <2>;
cs-setup-time = <3>;
data-valid-time = <1>;
column-space = <14>;
ahb-write-wait-unit = <2>;
ahb-write-wait-interval = <0>;
};
}; };
&dmic0 { &dmic0 {