michaelh/zephyr
1
0
Fork 0
Code Releases Activity

boards: remove enet pinmux for kinetis boards

Browse source 
Remove unnecessary usage of pinmux driver for kinetis boards with
ethernet

Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This commit is contained in:
Daniel DeGrasse 2022-03-07 15:16:26 -06:00 • committed by Carles Cufí
commit f5c9fce449
6 changed files with 13 additions and 45 deletions
Download patch file Download diff file Expand all files Collapse all files

10
boards/arm/frdm_k64f/frdm_k64f-pinctrl.dtsi
View file

@ -12,19 +12,15 @@
&pinctrl { &pinctrl {
enet_default: enet_default { enet_default: enet_default {
group0 { group0 {
pinmux = <RMII0_RXER_PTA5>;
drive-strength = "high";
slew-rate = "fast";
};
group1 {
pinmux = <RMII0_MDIO_PTB0>; pinmux = <RMII0_MDIO_PTB0>;
drive-strength = "low"; drive-strength = "low";
drive-open-drain; drive-open-drain;
bias-pull-up; bias-pull-up;
slew-rate = "fast"; slew-rate = "fast";
}; };
group2 { group1 {
pinmux = <RMII0_RXD1_PTA12>, pinmux = <RMII0_RXER_PTA5>,
<RMII0_RXD1_PTA12>,
<RMII0_RXD0_PTA13>, <RMII0_RXD0_PTA13>,
<RMII0_CRS_DV_PTA14>, <RMII0_CRS_DV_PTA14>,
<RMII0_TXEN_PTA15>, <RMII0_TXEN_PTA15>,

21
boards/arm/frdm_k64f/pinmux.c
View file

@ -43,27 +43,6 @@ static int frdm_k64f_pinmux_init(const struct device *dev)
pinmux_pin_set(portb, 10, PORT_PCR_MUX(kPORT_PinDisabledOrAnalog)); pinmux_pin_set(portb, 10, PORT_PCR_MUX(kPORT_PinDisabledOrAnalog));
#endif #endif
#if DT_NODE_HAS_STATUS(DT_NODELABEL(enet), okay) && CONFIG_NET_L2_ETHERNET
pinmux_pin_set(porta, 5, PORT_PCR_MUX(kPORT_MuxAlt4));
pinmux_pin_set(porta, 12, PORT_PCR_MUX(kPORT_MuxAlt4));
pinmux_pin_set(porta, 13, PORT_PCR_MUX(kPORT_MuxAlt4));
pinmux_pin_set(porta, 14, PORT_PCR_MUX(kPORT_MuxAlt4));
pinmux_pin_set(porta, 15, PORT_PCR_MUX(kPORT_MuxAlt4));
pinmux_pin_set(porta, 16, PORT_PCR_MUX(kPORT_MuxAlt4));
pinmux_pin_set(porta, 17, PORT_PCR_MUX(kPORT_MuxAlt4));
pinmux_pin_set(portb, 0, PORT_PCR_MUX(kPORT_MuxAlt4)
| PORT_PCR_ODE_MASK | PORT_PCR_PE_MASK | PORT_PCR_PS_MASK);
pinmux_pin_set(portb, 1, PORT_PCR_MUX(kPORT_MuxAlt4));
#if DT_NODE_HAS_STATUS(DT_CHILD(DT_NODELABEL(enet), ptp), okay)
pinmux_pin_set(portc, 16, PORT_PCR_MUX(kPORT_MuxAlt4));
pinmux_pin_set(portc, 17, PORT_PCR_MUX(kPORT_MuxAlt4));
pinmux_pin_set(portc, 18, PORT_PCR_MUX(kPORT_MuxAlt4));
#endif
#endif
#if DT_NODE_HAS_STATUS(DT_NODELABEL(flexcan0), okay) && CONFIG_CAN #if DT_NODE_HAS_STATUS(DT_NODELABEL(flexcan0), okay) && CONFIG_CAN
/* FlexCAN0 RX, TX */ /* FlexCAN0 RX, TX */
pinmux_pin_set(portb, 18, PORT_PCR_MUX(kPORT_MuxAlt2)); pinmux_pin_set(portb, 18, PORT_PCR_MUX(kPORT_MuxAlt2));

4
boards/arm/ip_k66f/ip_k66f-pinctrl.dtsi
View file

@ -1,6 +1,6 @@
/* /*
* NOTE: Autogenerated file by kinetis_signal2dts.py * NOTE: Autogenerated file by kinetis_cfg_utils.py
* for MK66FN2M0VMD18/signal_configuration.xml * for MK66FN2M0VMD18/signal_configuration.xml
* *
* Copyright (c) 2022, NXP * Copyright (c) 2022, NXP
* SPDX-License-Identifier: Apache-2.0 * SPDX-License-Identifier: Apache-2.0

13
boards/arm/ip_k66f/pinmux.c
View file

@ -38,19 +38,6 @@ static int ip_k66f_pinmux_init(const struct device *dev)
__ASSERT_NO_MSG(device_is_ready(porte)); __ASSERT_NO_MSG(device_is_ready(porte));
#endif #endif
#if DT_NODE_HAS_STATUS(DT_NODELABEL(enet), okay) && CONFIG_NET_L2_ETHERNET
pinmux_pin_set(porta, 12, PORT_PCR_MUX(kPORT_MuxAlt4));/* RMII_RXD1 */
pinmux_pin_set(porta, 13, PORT_PCR_MUX(kPORT_MuxAlt4));/* RMII_RXD0 */
pinmux_pin_set(porta, 14, PORT_PCR_MUX(kPORT_MuxAlt4));/* RMII_CRS_DV */
pinmux_pin_set(porta, 15, PORT_PCR_MUX(kPORT_MuxAlt4));/* RMII_RX_EN */
pinmux_pin_set(porta, 16, PORT_PCR_MUX(kPORT_MuxAlt4));/* RMII_TXD0 */
pinmux_pin_set(porta, 17, PORT_PCR_MUX(kPORT_MuxAlt4));/* RMII_TXD1 */
#if DT_NODE_HAS_STATUS(DT_NODELABEL(porte), okay)
/* RMII_REF_CLK */
pinmux_pin_set(porte, 26, PORT_PCR_MUX(kPORT_MuxAlt2));
#endif
#endif
return 0; return 0;
} }

4
boards/arm/mimxrt1060_evk/mimxrt1060_evk.dts
View file

@ -183,7 +183,11 @@ arduino_serial: &lpuart3 {};
&enet { &enet {
status = "okay"; status = "okay";
pinctrl-0 = <&pinmux_enet>;
pinctrl-names = "default";
ptp { ptp {
pinctrl-0 = <&pinmux_ptp>;
pinctrl-names = "default";
status = "okay"; status = "okay";
}; };
}; };

6
boards/arm/rddrone_fmuk66/rddrone_fmuk66-pinctrl.dtsi
View file

@ -1,6 +1,6 @@
/* /*
* NOTE: Autogenerated file by kinetis_signal2dts.py * NOTE: Autogenerated file by kinetis_cfg_utils.py
* for MK66FN2M0VMD18/signal_configuration.xml * for MK66FN2M0VMD18/signal_configuration.xml
* *
* Copyright (c) 2022, NXP * Copyright (c) 2022, NXP
* SPDX-License-Identifier: Apache-2.0 * SPDX-License-Identifier: Apache-2.0
@ -76,6 +76,7 @@
}; };
}; };
/* conflicts with UART2 */
ftm3_default: ftm3_default { ftm3_default: ftm3_default {
group0 { group0 {
pinmux = <FTM3_CH3_PTD3>, pinmux = <FTM3_CH3_PTD3>,
@ -168,6 +169,7 @@
}; };
}; };
/* conflicts with FTM3 */
uart2_default: uart2_default { uart2_default: uart2_default {
group0 { group0 {
pinmux = <UART2_RX_PTD2>, pinmux = <UART2_RX_PTD2>,