diff --git a/arch/x86/soc/quark_d2000/Kconfig b/arch/x86/soc/quark_d2000/Kconfig
index 9d7f2a87323..03c18b253a6 100644
--- a/arch/x86/soc/quark_d2000/Kconfig
+++ b/arch/x86/soc/quark_d2000/Kconfig
@@ -207,6 +207,14 @@ config I2C_CLOCK_SPEED
 
 endif
 
+if I2C_QMSI
+config I2C_QMSI_0
+	def_bool y
+config I2C_QMSI_0_IRQ
+	default 4
+config I2C_QMSI_0_INT_PRIORITY
+	default 0
+endif # I2C_QMSI
 endif # I2C
 
 endif # SOC_QUARK_D2000
diff --git a/drivers/i2c/i2c_qmsi.c b/drivers/i2c/i2c_qmsi.c
index 7c2206ea9b6..5a1825c3c49 100644
--- a/drivers/i2c/i2c_qmsi.c
+++ b/drivers/i2c/i2c_qmsi.c
@@ -218,6 +218,8 @@ static int i2c_qmsi_init(struct device *dev)
 
 		clk_periph_enable(CLK_PERIPH_I2C_M0_REGISTER);
 		break;
+
+#ifdef CONFIG_I2C_QMSI_1
 	case QM_I2C_1:
 		IRQ_CONNECT(CONFIG_I2C_QMSI_1_IRQ,
 			    CONFIG_I2C_QMSI_1_INT_PRIORITY, qm_i2c_1_isr, NULL,
@@ -227,6 +229,8 @@ static int i2c_qmsi_init(struct device *dev)
 
 		clk_periph_enable(CLK_PERIPH_I2C_M1_REGISTER);
 		break;
+#endif /* CONFIG_I2C_QMSI_1 */
+
 	default:
 		return DEV_FAIL;
 	}
diff --git a/samples/drivers/i2c_lsm9ds0/README b/samples/drivers/i2c_lsm9ds0/README
index fef9e81b268..e8d562c6bcb 100644
--- a/samples/drivers/i2c_lsm9ds0/README
+++ b/samples/drivers/i2c_lsm9ds0/README
@@ -13,14 +13,14 @@ the datasheet.
 Below follows the wiring information for each board this samples has been
 tested.
 
---------------+--------------------
-| LSM9DS0 pin | Quark SE Devboard |
-|             | pin               |
-|-------------+-------------------|
-| VIN         | P4 pin 1          |
-| GND         | P4 pin 43         |
-| SCL         | P4 pin 31         |
-| SDA         | P4 pin 33         |
-| CSG         | P4 pin 29         |
-| SDOG        | P4 pin 17         |
---------------+--------------------
+--------------+-------------------+------------------
+| LSM9DS0 pin | Quark SE Devboard | Quark D2000 CRB |
+|             | pin               | pin             |
+|-------------+-------------------+-----------------|
+| VIN         | P4 pin 1          | J25 pin 1       |
+| GND         | P4 pin 43         | J25 pin 2       |
+| SCL         | P4 pin 31         | J21 pin 6       |
+| SDA         | P4 pin 33         | J21 pin 5       |
+| CSG         | P4 pin 29         | J25 pin 1       |
+| SDOG        | P4 pin 17         | J25 pin 2       |
+--------------+-------------------+------------------