diff --git a/drivers/sensor/iis2dlpc/Kconfig b/drivers/sensor/iis2dlpc/Kconfig
index 6ae34a0dbc6..de0eaca9278 100644
--- a/drivers/sensor/iis2dlpc/Kconfig
+++ b/drivers/sensor/iis2dlpc/Kconfig
@@ -156,26 +156,6 @@ endif # IIS2DLPC_PULSE
 
 endif # IIS2DLPC_TRIGGER
 
-choice
-	prompt "Accelerometer Full-scale range setting"
-	default IIS2DLPC_ACCEL_RANGE_RUNTIME
-
-config IIS2DLPC_ACCEL_RANGE_RUNTIME
-	bool "Set at runtime (Default 2G)"
-
-config IIS2DLPC_ACCEL_RANGE_2G
-	bool "2G"
-
-config IIS2DLPC_ACCEL_RANGE_4G
-	bool "4G"
-
-config IIS2DLPC_ACCEL_RANGE_8G
-	bool "8G"
-
-config IIS2DLPC_ACCEL_RANGE_16G
-	bool "16G"
-endchoice
-
 choice
 	prompt "Accelerometer sampling frequency (ODR)"
 	default IIS2DLPC_ODR_RUNTIME
diff --git a/drivers/sensor/iis2dlpc/iis2dlpc.c b/drivers/sensor/iis2dlpc/iis2dlpc.c
index f3ccd333695..2569376f63d 100644
--- a/drivers/sensor/iis2dlpc/iis2dlpc.c
+++ b/drivers/sensor/iis2dlpc/iis2dlpc.c
@@ -31,13 +31,12 @@ LOG_MODULE_REGISTER(IIS2DLPC, CONFIG_SENSOR_LOG_LEVEL);
  * @dev: Pointer to instance of struct device (I2C or SPI)
  * @range: Full scale range (2, 4, 8 and 16 G)
  */
-static int iis2dlpc_set_range(const struct device *dev, uint16_t range)
+static int iis2dlpc_set_range(const struct device *dev, uint8_t fs)
 {
 	int err;
 	struct iis2dlpc_data *iis2dlpc = dev->data;
 	const struct iis2dlpc_device_config *cfg = dev->config;
 	uint8_t shift_gain = 0U;
-	uint8_t fs = IIS2DLPC_FS_TO_REG(range);
 
 	err = iis2dlpc_full_scale_set(iis2dlpc->ctx, fs);
 
@@ -48,8 +47,7 @@ static int iis2dlpc_set_range(const struct device *dev, uint16_t range)
 	if (!err) {
 		/* save internally gain for optimization */
 		iis2dlpc->gain =
-			IIS2DLPC_FS_TO_GAIN(IIS2DLPC_FS_TO_REG(range),
-					    shift_gain);
+			IIS2DLPC_FS_TO_GAIN(fs, shift_gain);
 	}
 
 	return err;
@@ -146,7 +144,8 @@ static int iis2dlpc_config(const struct device *dev, enum sensor_channel chan,
 {
 	switch (attr) {
 	case SENSOR_ATTR_FULL_SCALE:
-		return iis2dlpc_set_range(dev, sensor_ms2_to_g(val));
+		return iis2dlpc_set_range(dev,
+				IIS2DLPC_FS_TO_REG(sensor_ms2_to_g(val)));
 	case SENSOR_ATTR_SAMPLING_FREQUENCY:
 		return iis2dlpc_set_odr(dev, val->val1);
 	default:
@@ -297,15 +296,12 @@ static int iis2dlpc_init(const struct device *dev)
 		return -EIO;
 	}
 
-	if (iis2dlpc_full_scale_set(iis2dlpc->ctx, IIS2DLPC_ACC_FS) < 0) {
+	LOG_INF("range is %d", cfg->range);
+	if (iis2dlpc_set_range(dev, IIS2DLPC_FS_TO_REG(cfg->range)) < 0) {
+		LOG_ERR("range init error %d", cfg->range);
 		return -EIO;
 	}
 
-	iis2dlpc->gain =
-		IIS2DLPC_FS_TO_GAIN(IIS2DLPC_ACC_FS,
-				    cfg->pm == IIS2DLPC_CONT_LOW_PWR_12bit ?
-				    IIS2DLPC_SHFT_GAIN_NOLP1 : 0);
-
 #ifdef CONFIG_IIS2DLPC_TRIGGER
 	if (iis2dlpc_init_interrupt(dev) < 0) {
 		LOG_ERR("Failed to initialize interrupts");
@@ -377,6 +373,7 @@ static int iis2dlpc_init(const struct device *dev)
 const struct iis2dlpc_device_config iis2dlpc_cfg = {
 	.bus_name = DT_INST_BUS_LABEL(0),
 	.pm = CONFIG_IIS2DLPC_POWER_MODE,
+	.range = DT_INST_PROP(0, range),
 #ifdef CONFIG_IIS2DLPC_TRIGGER
 	.int_gpio_port = DT_INST_GPIO_LABEL(0, drdy_gpios),
 	.int_gpio_pin = DT_INST_GPIO_PIN(0, drdy_gpios),
diff --git a/drivers/sensor/iis2dlpc/iis2dlpc.h b/drivers/sensor/iis2dlpc/iis2dlpc.h
index cc36c77095f..2250d350736 100644
--- a/drivers/sensor/iis2dlpc/iis2dlpc.h
+++ b/drivers/sensor/iis2dlpc/iis2dlpc.h
@@ -52,17 +52,6 @@ union axis3bit16_t {
 /* FS reg value from Full Scale */
 #define IIS2DLPC_FS_TO_REG(_fs)	(30 - __builtin_clz(_fs))
 
-#if defined(CONFIG_IIS2DLPC_ACCEL_RANGE_RUNTIME) || \
-	defined(CONFIG_IIS2DLPC_ACCEL_RANGE_2G)
-	#define IIS2DLPC_ACC_FS		IIS2DLPC_2g
-#elif defined(CONFIG_IIS2DLPC_ACCEL_RANGE_4G)
-	#define IIS2DLPC_ACC_FS		IIS2DLPC_4g
-#elif defined(CONFIG_IIS2DLPC_ACCEL_RANGE_8G)
-	#define IIS2DLPC_ACC_FS		IIS2DLPC_8g
-#elif defined(CONFIG_IIS2DLPC_ACCEL_RANGE_16G)
-	#define IIS2DLPC_ACC_FS		IIS2DLPC_16g
-#endif
-
 /* Acc Gain value in ug/LSB in High Perf mode */
 #define IIS2DLPC_FS_2G_GAIN		244
 #define IIS2DLPC_FS_4G_GAIN		488
@@ -89,6 +78,7 @@ union axis3bit16_t {
 struct iis2dlpc_device_config {
 	const char *bus_name;
 	iis2dlpc_mode_t pm;
+	uint8_t range;
 #ifdef CONFIG_IIS2DLPC_TRIGGER
 	const char *int_gpio_port;
 	uint8_t int_gpio_pin;
diff --git a/dts/bindings/sensor/st,iis2dlpc-common.yaml b/dts/bindings/sensor/st,iis2dlpc-common.yaml
index 2f54dc6abe3..b452daf34ef 100644
--- a/dts/bindings/sensor/st,iis2dlpc-common.yaml
+++ b/dts/bindings/sensor/st,iis2dlpc-common.yaml
@@ -10,3 +10,14 @@ properties:
         This pin defaults to active high when produced by the sensor.
         The property value should ensure the flags properly describe
         the signal that is presented to the driver.
+
+    range:
+      type: int
+      required: false
+      default: 2
+      description: Range in g. Default is power-up configuration.
+      enum:
+        - 16 # 16g (1.952 mg/LSB)
+        -  8 #  8g (0.976 mg/LSB)
+        -  4 #  4g (0.488 mg/LSB)
+        -  2 #  2g (0.244 mg/LSB)