boards: st: Remove useless CONFIG_PINCTRL assignment

PINCTRL should not be set per board, but rather depending on drivers needs.


Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
This commit is contained in:
Erwan Gouriou 2024-08-29 15:52:31 +02:00 committed by Fabio Baltieri
commit e6a296bbe4
108 changed files with 0 additions and 319 deletions

View file

@ -16,8 +16,6 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y
# Enable MPU
CONFIG_ARM_MPU=y

View file

@ -15,6 +15,3 @@ CONFIG_UART_CONSOLE=y
# GPIO Controller
CONFIG_GPIO=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -12,6 +12,3 @@ CONFIG_CLOCK_CONTROL=y
# console
CONFIG_CONSOLE=y
CONFIG_UART_CONSOLE=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -12,6 +12,3 @@ CONFIG_CLOCK_CONTROL=y
# console
CONFIG_CONSOLE=y
CONFIG_UART_CONSOLE=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -13,8 +13,6 @@ CONFIG_CLOCK_CONTROL=y
CONFIG_CONSOLE=y
CONFIG_UART_CONSOLE=y
# enable pin controller
CONFIG_PINCTRL=y
CONFIG_ARM_TRUSTZONE_M=y
CONFIG_RUNTIME_NMI=y

View file

@ -19,6 +19,3 @@ CONFIG_ARM_MPU=y
# Enable HW stack protection
CONFIG_HW_STACK_PROTECTION=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -13,6 +13,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -19,6 +19,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -21,6 +21,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -12,6 +12,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -12,6 +12,3 @@ CONFIG_GPIO=y
# Enable clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -12,6 +12,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -11,6 +11,3 @@ CONFIG_GPIO=y
# enable clock
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -17,6 +17,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -11,6 +11,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -11,6 +11,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -17,6 +17,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -13,6 +13,3 @@ CONFIG_GPIO=y
# Enable clock
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -17,6 +17,3 @@ CONFIG_GPIO=y
# clock configuration
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -17,6 +17,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -17,6 +17,3 @@ CONFIG_GPIO=y
# clock configuration
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -17,6 +17,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -17,6 +17,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -17,6 +17,3 @@ CONFIG_GPIO=y
# clock configuration
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -17,6 +17,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -17,6 +17,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -18,6 +18,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -18,6 +18,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -18,6 +18,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -17,6 +17,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -13,6 +13,3 @@ CONFIG_GPIO=y
# Enables clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -13,6 +13,3 @@ CONFIG_GPIO=y
# Enables clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -13,6 +13,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -18,6 +18,3 @@ CONFIG_ARM_MPU=y
# Enable HW stack protection
CONFIG_HW_STACK_PROTECTION=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -18,6 +18,3 @@ CONFIG_ARM_MPU=y
# Enable HW stack protection
CONFIG_HW_STACK_PROTECTION=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -19,6 +19,3 @@ CONFIG_HW_STACK_PROTECTION=y
# enable GPIO
CONFIG_GPIO=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -12,5 +12,3 @@ CONFIG_CLOCK_CONTROL=y
# enable GPIO
CONFIG_GPIO=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -18,5 +18,3 @@ CONFIG_HW_STACK_PROTECTION=y
# enable GPIO
CONFIG_GPIO=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -18,6 +18,3 @@ CONFIG_GPIO=y
# Enable Clock
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -18,6 +18,3 @@ CONFIG_GPIO=y
# Enable clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -15,6 +15,3 @@ CONFIG_CLOCK_CONTROL=y
# Console
#CONFIG_CONSOLE=y
#CONFIG_UART_CONSOLE=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -22,6 +22,3 @@ CONFIG_GPIO=y
# Enable Clock
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -18,6 +18,3 @@ CONFIG_GPIO=y
# Enable clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -14,9 +14,6 @@ CONFIG_SERIAL=y
CONFIG_CONSOLE=y
CONFIG_UART_CONSOLE=y
# Enable Pinctrl
CONFIG_PINCTRL=y
# Enable GPIO
CONFIG_GPIO=y

View file

@ -17,6 +17,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -17,6 +17,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -20,6 +20,3 @@ CONFIG_GPIO=y
# Clock controller
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -15,6 +15,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -17,6 +17,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -18,6 +18,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -18,6 +18,3 @@ CONFIG_CLOCK_CONTROL=y
# console
CONFIG_CONSOLE=y
CONFIG_UART_CONSOLE=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -18,6 +18,3 @@ CONFIG_CLOCK_CONTROL=y
# console
CONFIG_CONSOLE=y
CONFIG_UART_CONSOLE=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -18,6 +18,3 @@ CONFIG_CLOCK_CONTROL=y
# console
CONFIG_CONSOLE=y
CONFIG_UART_CONSOLE=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -18,6 +18,3 @@ CONFIG_CLOCK_CONTROL=y
# console
CONFIG_CONSOLE=y
CONFIG_UART_CONSOLE=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -18,6 +18,3 @@ CONFIG_ARM_MPU=y
# Enable HW stack protection
CONFIG_HW_STACK_PROTECTION=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -18,6 +18,3 @@ CONFIG_ARM_MPU=y
# Enable HW stack protection
CONFIG_HW_STACK_PROTECTION=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -18,6 +18,3 @@ CONFIG_ARM_MPU=y
# Enable HW stack protection
CONFIG_HW_STACK_PROTECTION=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -18,6 +18,3 @@ CONFIG_ARM_MPU=y
# Enable HW stack protection
CONFIG_HW_STACK_PROTECTION=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -18,6 +18,3 @@ CONFIG_ARM_MPU=y
# Enable HW stack protection
CONFIG_HW_STACK_PROTECTION=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -19,6 +19,3 @@ CONFIG_ARM_MPU=y
CONFIG_ARM_TRUSTZONE_M=y
CONFIG_RUNTIME_NMI=y
CONFIG_TRUSTED_EXECUTION_NONSECURE=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -19,6 +19,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -18,6 +18,3 @@ CONFIG_ARM_MPU=y
# Enable HW stack protection
CONFIG_HW_STACK_PROTECTION=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -18,6 +18,3 @@ CONFIG_ARM_MPU=y
# Enable HW stack protection
CONFIG_HW_STACK_PROTECTION=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -16,6 +16,3 @@ CONFIG_ARM_MPU=y
# Enable HW stack protection
CONFIG_HW_STACK_PROTECTION=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -18,6 +18,3 @@ CONFIG_ARM_MPU=y
# Enable HW stack protection
CONFIG_HW_STACK_PROTECTION=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -20,8 +20,6 @@ CONFIG_ARM_MPU=y
# Enable HW stack protection
CONFIG_HW_STACK_PROTECTION=y
# enable pin controller
CONFIG_PINCTRL=y
# Enable the internal SMPS regulator
CONFIG_POWER_SUPPLY_DIRECT_SMPS=y

View file

@ -16,6 +16,3 @@ CONFIG_ARM_MPU=y
# Enable HW stack protection
CONFIG_HW_STACK_PROTECTION=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -18,6 +18,3 @@ CONFIG_ARM_MPU=y
# Enable HW stack protection
CONFIG_HW_STACK_PROTECTION=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -15,6 +15,3 @@ CONFIG_CLOCK_CONTROL=y
# Enable console
CONFIG_SERIAL=y
CONFIG_CONSOLE=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -16,6 +16,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -14,6 +14,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -16,6 +16,3 @@ CONFIG_CLOCK_CONTROL=y
# Enable console
CONFIG_SERIAL=y
CONFIG_CONSOLE=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -12,6 +12,3 @@ CONFIG_GPIO=y
# RCC Controller
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -19,6 +19,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -14,6 +14,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -12,6 +12,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -12,6 +12,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -19,6 +19,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -11,6 +11,3 @@ CONFIG_GPIO=y
# enable clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -18,6 +18,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -17,6 +17,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -17,6 +17,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -17,6 +17,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -17,6 +17,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -17,6 +17,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -17,6 +17,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -17,6 +17,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -18,6 +18,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -17,6 +17,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -16,6 +16,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -15,6 +15,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -15,6 +15,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -18,6 +18,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -16,6 +16,3 @@ CONFIG_CLOCK_CONTROL=y
# Console
#CONFIG_CONSOLE=y
#CONFIG_UART_CONSOLE=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -23,6 +23,3 @@ CONFIG_GPIO=y
# Enable Clock
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -21,6 +21,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -21,6 +21,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -12,6 +12,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -12,6 +12,3 @@ CONFIG_GPIO=y
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# enable pin controller
CONFIG_PINCTRL=y

View file

@ -18,6 +18,3 @@ CONFIG_CLOCK_CONTROL=y
# console
CONFIG_CONSOLE=y
CONFIG_UART_CONSOLE=y
# enable pin controller
CONFIG_PINCTRL=y

Some files were not shown because too many files have changed in this diff Show more