michaelh/zephyr
1
0
Fork 0
Code Releases Activity

drivers: uart: stm32: Complete wakeup feature

Browse source 
Serial wakeup feature was only working whe DBG in Stop mode setting
was enabled.
Add required changes to make it functional also when this configuration
isn't set.

Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
This commit is contained in:
Erwan Gouriou 2023-11-16 12:17:59 +01:00 • committed by Carles Cufí
commit e5ab70b724
1 changed files with 19 additions and 0 deletions
Download patch file Download diff file Expand all files Collapse all files

19
drivers/serial/uart_stm32.c
View file

@ -1278,6 +1278,18 @@ static void uart_stm32_isr(const struct device *dev)
/* Clear errors */ /* Clear errors */
uart_stm32_err_check(dev); uart_stm32_err_check(dev);
#endif /* CONFIG_UART_ASYNC_API */ #endif /* CONFIG_UART_ASYNC_API */
#ifdef CONFIG_PM
if (LL_USART_IsEnabledIT_WKUP(config->usart) &&
LL_USART_IsActiveFlag_WKUP(config->usart)) {
LL_USART_ClearFlag_WKUP(config->usart);
#ifdef USART_ISR_REACK
while (LL_USART_IsActiveFlag_REACK(config->usart) == 0) {
}
#endif
}
#endif
} }
#endif /* CONFIG_UART_INTERRUPT_DRIVEN || CONFIG_UART_ASYNC_API || CONFIG_PM */ #endif /* CONFIG_UART_INTERRUPT_DRIVEN || CONFIG_UART_ASYNC_API || CONFIG_PM */
@ -2005,7 +2017,14 @@ static int uart_stm32_init(const struct device *dev)
* CONFIG_PM_DEVICE=n : Always active * CONFIG_PM_DEVICE=n : Always active
* CONFIG_PM_DEVICE=y : Controlled by pm_device_wakeup_enable() * CONFIG_PM_DEVICE=y : Controlled by pm_device_wakeup_enable()
*/ */
LL_USART_Disable(config->usart);
LL_USART_SetWKUPType(config->usart, LL_USART_WAKEUP_ON_RXNE);
LL_USART_EnableIT_WKUP(config->usart);
LL_USART_ClearFlag_WKUP(config->usart);
LL_USART_EnableInStopMode(config->usart); LL_USART_EnableInStopMode(config->usart);
LL_USART_Enable(config->usart);
if (config->wakeup_line != STM32_EXTI_LINE_NONE) { if (config->wakeup_line != STM32_EXTI_LINE_NONE) {
/* Prepare the WAKEUP with the expected EXTI line */ /* Prepare the WAKEUP with the expected EXTI line */
LL_EXTI_EnableIT_0_31(BIT(config->wakeup_line)); LL_EXTI_EnableIT_0_31(BIT(config->wakeup_line));