samples: sensors: drop dps310 sample as a more generic one exists

This sample adds no value compared to e.g. sensor shell.

Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>

samples/sensor/dps310/CMakeLists.txt

@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: Apache-2.0
-
-cmake_minimum_required(VERSION 3.20.0)
-find_package(Zephyr REQUIRED HINTS $ENV{ZEPHYR_BASE})
-
-project(dps310)
-FILE(GLOB app_sources src/*.c)
-target_sources(app PRIVATE ${app_sources})

samples/sensor/dps310/README.rst

@@ -1,45 +0,0 @@
-.. _dps310:
-
-DPS310 Temperature and Pressure Sensor
-######################################
-
-Overview
-********
-
-This sample application periodically reads temperature and pressure data from
-the first available device that implements SENSOR_CHAN_AMBIENT_TEMP and
-SENSOR_CHAN_PRESS. This sample checks the sensor in polling mode (without
-interrupt trigger).
-
-Building and Running
-********************
-
-This sample application uses an DPS310 sensor connected to a board via I2C.
-Connect the sensor pins according to the connection diagram given in the
-`dps310 datasheet`_ at page 18 figure 7.
-
-Build and flash this sample (for example, for the nrf52840dk/nrf52840 board)
-using these commands:
-
-.. zephyr-app-commands::
-   :zephyr-app: samples/sensor/dps310
-   :board: nrf52840dk/nrf52840
-   :goals: flash
-   :compact:
-
-Sample Output
-=============
-To check output of this sample, any serial console program can be used.
-This example uses ``picocom`` on the serial port ``/dev/ttyUSB0``:
-
-.. code-block:: console
-
-        $ sudo picocom -D /dev/ttyUSB0
-
-.. code-block:: console
-
-        temp: 23.774363; press: 97.354728
-        temp: 23.777492; press: 97.353904
-        temp: 23.784646; press: 97.354064
-
-.. _dps310 datasheet: https://www.infineon.com/dgdl/Infineon-DPS310-DataSheet-v01_01-EN.pdf?fileId=5546d462576f34750157750826c42242

samples/sensor/dps310/app.overlay

@@ -1,17 +0,0 @@
-/*
- * Copyright (c) 2019 Infineon Technologies AG
- *
- * SPDX-License-Identifier: Apache-2.0
- */
-
-/*
- * A DPS310 attached to the Arduino I2C pins
- */
-
-&arduino_i2c {
-	DPS310@77 {
-		status = "okay";
-		compatible = "infineon,dps310";
-		reg = <0x77>;
-	};
-};

samples/sensor/dps310/prj.conf

@@ -1,3 +0,0 @@
-CONFIG_STDOUT_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_SENSOR=y

samples/sensor/dps310/sample.yaml

@@ -1,14 +0,0 @@
-sample:
-  name: DP310 Sensor sample
-tests:
-  sample.sensor.dps310:
-    harness: console
-    tags: sensors
-    depends_on:
-      - i2c
-      - arduino_i2c
-    harness_config:
-      type: one_line
-      regex:
-        - "temp: (.*); press: (.*);"
-      fixture: fixture_i2c_dps310

samples/sensor/dps310/src/main.c

@@ -1,37 +0,0 @@
-/*
- * Copyright (c) 2019 Infineon Technologies AG
- *
- * SPDX-License-Identifier: Apache-2.0
- */
-
-#include <zephyr/kernel.h>
-#include <zephyr/device.h>
-#include <zephyr/drivers/sensor.h>
-#include <stdlib.h>
-
-int main(void)
-{
-	printk("Hello DPS310\n");
-	const struct device *const dev = DEVICE_DT_GET_ONE(infineon_dps310);
-
-	if (!device_is_ready(dev)) {
-		printk("Device %s is not ready\n", dev->name);
-		return 0;
-	}
-
-	printk("dev %p name %s\n", dev, dev->name);
-
-	while (1) {
-		struct sensor_value temp, press;
-
-		sensor_sample_fetch(dev);
-		sensor_channel_get(dev, SENSOR_CHAN_AMBIENT_TEMP, &temp);
-		sensor_channel_get(dev, SENSOR_CHAN_PRESS, &press);
-
-		printk("temp: %d.%06d; press: %d.%06d\n",
-		      temp.val1, abs(temp.val2), press.val1, press.val2);
-
-		k_sleep(K_MSEC(1000));
-	}
-	return 0;
-}