diff --git a/boards/arm/b_u585i_iot02a/Kconfig.board b/boards/arm/b_u585i_iot02a/Kconfig.board
new file mode 100644
index 00000000000..2ef452a9fa5
--- /dev/null
+++ b/boards/arm/b_u585i_iot02a/Kconfig.board
@@ -0,0 +1,8 @@
+# B_U585I_IOT02A discovery kit configuration
+
+# Copyright (c) 2021 STMicroelectronics
+# SPDX-License-Identifier: Apache-2.0
+
+config BOARD_B_U585I_IOT02A
+	bool "STM32U585I IOT Discovery kit"
+	depends on SOC_STM32U585XX
diff --git a/boards/arm/b_u585i_iot02a/Kconfig.defconfig b/boards/arm/b_u585i_iot02a/Kconfig.defconfig
new file mode 100644
index 00000000000..61bfbadbba4
--- /dev/null
+++ b/boards/arm/b_u585i_iot02a/Kconfig.defconfig
@@ -0,0 +1,11 @@
+# B_U585I_IOT02A discovery kit board configuration
+
+# Copyright (c) 2021 STMicroelectronics
+# SPDX-License-Identifier: Apache-2.0
+
+if BOARD_B_U585I_IOT02A
+
+config BOARD
+	default "b_u585i_iot02a"
+
+endif # BOARD_B_U585I_IOT02A
diff --git a/boards/arm/b_u585i_iot02a/arduino_r3_connector.dtsi b/boards/arm/b_u585i_iot02a/arduino_r3_connector.dtsi
new file mode 100644
index 00000000000..9809f715e3e
--- /dev/null
+++ b/boards/arm/b_u585i_iot02a/arduino_r3_connector.dtsi
@@ -0,0 +1,36 @@
+/*
+ * Copyright (c) 2021 STMicroelectronics
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+/ {
+	arduino_header: connector {
+		compatible = "arduino-header-r3";
+		#gpio-cells = <2>;
+		gpio-map-mask = <0xffffffff 0xffffffc0>;
+		gpio-map-pass-thru = <0 0x3f>;
+		gpio-map = <0 0 &gpioc 0 0>,	/* A0 */
+			   <1 0 &gpioc 2 0>,	/* A1 */
+			   <2 0 &gpioc 4 0>,	/* A2 */
+			   <3 0 &gpioc 5 0>,	/* A3 */
+			   <4 0 &gpioa 7 0>,	/* A4 */
+			   <5 0 &gpiob 0 0>,	/* A5 */
+			   <6 0 &gpioc 11 0>,	/* D0 */
+			   <7 0 &gpioc 10 0>,	/* D1 */
+			   <8 0 &gpiod 15 0>,	/* D2 */
+			   <9 0 &gpiob 2 0>,	/* D3 */
+			   <10 0 &gpioe 7 0>,	/* D4 */
+			   <11 0 &gpioe 0 0>,	/* D5 */
+			   <12 0 &gpiob 6 0>,	/* D6 */
+			   <13 0 &gpiof 13 0>,	/* D7 */
+			   <14 0 &gpioc 1 0>,	/* D8 */
+			   <15 0 &gpioa 8 0>,	/* D9 */
+			   <16 0 &gpioe 12 0>,	/* D10 */
+			   <17 0 &gpioe 15 0>,	/* D11 */
+			   <18 0 &gpioe 14 0>,	/* D12 */
+			   <19 0 &gpioe 13 0>,	/* D13 */
+			   <20 0 &gpiob 9 0>,	/* D14 */
+			   <21 0 &gpiob 8 0>;	/* D15 */
+	};
+};
diff --git a/boards/arm/b_u585i_iot02a/b_u585i_iot02a-common.dtsi b/boards/arm/b_u585i_iot02a/b_u585i_iot02a-common.dtsi
new file mode 100644
index 00000000000..09e84118963
--- /dev/null
+++ b/boards/arm/b_u585i_iot02a/b_u585i_iot02a-common.dtsi
@@ -0,0 +1,59 @@
+/*
+ * Copyright (c) 2021 Linaro Limited
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+#include <st/u5/stm32u585Xi.dtsi>
+#include <st/u5/stm32u585aiixq-pinctrl.dtsi>
+#include "arduino_r3_connector.dtsi"
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		green_led_1: led_1 {
+			gpios = <&gpioh 7 GPIO_ACTIVE_HIGH>;
+			label = "User LD7";
+		};
+		red_led_1: led_3 {
+			gpios = <&gpioh 6 GPIO_ACTIVE_HIGH>;
+			label = "User LD6";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		user_button: button {
+			label = "User";
+			gpios = <&gpioc 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+		};
+	};
+};
+
+&clk_lse {
+	status = "okay";
+};
+
+&clk_msis {
+	status = "okay";
+	msi-range = <4>;
+	msi-pll-mode;
+};
+
+&pll1 {
+	div-m = <1>;
+	mul-n = <80>;
+	div-q = <2>;
+	div-r = <2>;
+	clocks = <&clk_msis>;
+	status = "okay";
+};
+
+&rcc {
+	clocks = <&pll1>;
+	clock-frequency = <DT_FREQ_M(160)>;
+	ahb-prescaler = <1>;
+	apb1-prescaler = <1>;
+	apb2-prescaler = <1>;
+	apb3-prescaler = <1>;
+};
diff --git a/boards/arm/b_u585i_iot02a/b_u585i_iot02a.dts b/boards/arm/b_u585i_iot02a/b_u585i_iot02a.dts
new file mode 100644
index 00000000000..5d2fff31f4f
--- /dev/null
+++ b/boards/arm/b_u585i_iot02a/b_u585i_iot02a.dts
@@ -0,0 +1,32 @@
+/*
+ * Copyright (c) 2021 STMicroelectronics
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+/dts-v1/;
+#include "b_u585i_iot02a-common.dtsi"
+
+/ {
+	model = "STMicroelectronics B-U585I-IOT02A discovery kit";
+	compatible = "st,b-u585i-iot02a";
+
+	chosen {
+		zephyr,console = &usart1;
+		zephyr,shell-uart = &usart1;
+		zephyr,sram = &sram0;
+		zephyr,flash = &flash0;
+	};
+
+	aliases {
+		led0 = &green_led_1;
+		led1 = &red_led_1;
+		sw0 = &user_button;
+	};
+};
+
+&usart1 {
+	pinctrl-0 = <&usart1_tx_pa9 &usart1_rx_pa10>;
+	current-speed = <115200>;
+	status = "okay";
+};
diff --git a/boards/arm/b_u585i_iot02a/b_u585i_iot02a.yaml b/boards/arm/b_u585i_iot02a/b_u585i_iot02a.yaml
new file mode 100644
index 00000000000..05d3ebf3083
--- /dev/null
+++ b/boards/arm/b_u585i_iot02a/b_u585i_iot02a.yaml
@@ -0,0 +1,10 @@
+identifier: b_u585i_iot02a
+name: ST B_U585I_IOT02A Discovery kit
+type: mcu
+arch: arm
+toolchain:
+  - zephyr
+  - gnuarmemb
+  - xtools
+ram: 786
+flash: 2048
diff --git a/boards/arm/b_u585i_iot02a/b_u585i_iot02a_defconfig b/boards/arm/b_u585i_iot02a/b_u585i_iot02a_defconfig
new file mode 100644
index 00000000000..5ad1d1d662d
--- /dev/null
+++ b/boards/arm/b_u585i_iot02a/b_u585i_iot02a_defconfig
@@ -0,0 +1,20 @@
+# SPDX-License-Identifier: Apache-2.0
+
+CONFIG_SOC_SERIES_STM32U5X=y
+CONFIG_SOC_STM32U585XX=y
+
+# enable uart driver
+CONFIG_SERIAL=y
+
+# enable pinmux
+CONFIG_PINMUX=y
+
+# enable GPIO
+CONFIG_GPIO=y
+
+# Enable Clocks
+CONFIG_CLOCK_CONTROL=y
+
+# console
+CONFIG_CONSOLE=y
+CONFIG_UART_CONSOLE=y
diff --git a/boards/arm/b_u585i_iot02a/board.cmake b/boards/arm/b_u585i_iot02a/board.cmake
new file mode 100644
index 00000000000..7cb5e5e89ad
--- /dev/null
+++ b/boards/arm/b_u585i_iot02a/board.cmake
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: Apache-2.0
+
+board_runner_args(stm32cubeprogrammer "--erase" "--port=swd" "--reset=hw")
+board_runner_args(stm32cubeprogrammer "--port=swd" "--reset=hw")
+
+board_runner_args(openocd "--tcl-port=6666")
+board_runner_args(openocd --cmd-pre-init "gdb_report_data_abort enable")
+board_runner_args(openocd "--no-halt")
+
+include(${ZEPHYR_BASE}/boards/common/stm32cubeprogrammer.board.cmake)
+# FIXME: openocd runner requires use of STMicro openocd fork.
+# Check board documentation for more details.
+include(${ZEPHYR_BASE}/boards/common/openocd.board.cmake)
diff --git a/boards/arm/b_u585i_iot02a/doc/img/b-u585i-iot02a.jpg b/boards/arm/b_u585i_iot02a/doc/img/b-u585i-iot02a.jpg
new file mode 100644
index 00000000000..6fe7baa7faa
Binary files /dev/null and b/boards/arm/b_u585i_iot02a/doc/img/b-u585i-iot02a.jpg differ
diff --git a/boards/arm/b_u585i_iot02a/doc/index.rst b/boards/arm/b_u585i_iot02a/doc/index.rst
new file mode 100644
index 00000000000..24bccc3c2a8
--- /dev/null
+++ b/boards/arm/b_u585i_iot02a/doc/index.rst
@@ -0,0 +1,301 @@
+.. _b_u585i_iot02a_board:
+
+ST B_U585I_IOT02A Discovery kit
+###############################
+
+Overview
+********
+
+The B_U585I_IOT02A Discovery kit features an ARM Cortex-M33 based STM32U585AI MCU
+with a wide range of connectivity support and configurations. Here are
+some highlights of the B_U585I_IOT02A Discovery kit:
+
+
+- STM32U585AII6Q microcontroller featuring 2 Mbyte of Flash memory, 786 Kbytes of RAM in UFBGA169 package
+- 512-Mbit octal-SPI Flash memory, 64-Mbit octal-SPI PSRAM, 256-Kbit I2C EEPROM
+- USB FS, Sink and Source power, 2.5 W power capability
+- 802.11 b/g/n compliant Wi-Fi® module from MXCHIP
+- Bluetooth Low Energy from STMicroelectronics
+- MEMS sensors from STMicroelectronics
+
+  - 2 digital microphones
+  - Relative humidity and temperature sensor
+  - 3-axis magnetometer
+  - 3D accelerometer and 3D gyroscope
+  - Pressure sensor, 260-1260 hPa absolute digital output barometer
+  - Time-of-flight and gesture-detection sensor
+  - Ambient-light sensor
+
+- 2 push-buttons (user and reset)
+- 2 user LEDs
+
+- Flexible power supply options:
+    - ST-LINK/V3
+    - USB Vbus
+    - External sources
+
+
+.. image:: img/b-u585i-iot02a.jpg
+     :width: 426px
+     :align: center
+     :height: 33px
+     :alt: B_U585I_IOT02A Discovery kit
+
+More information about the board can be found at the `B U585I IOT02A Discovery kit website`_.
+
+Hardware
+********
+
+The STM32U585xx devices are an ultra-low-power microcontrollers family (STM32U5
+Series) based on the high-performance Arm|reg| Cortex|reg|-M33 32-bit RISC core.
+They operate at a frequency of up to 160 MHz.
+
+- Ultra-low-power with FlexPowerControl (down to 300 nA Standby mode and 19.5 uA/MHz run mode)
+- Core: ARM |reg| 32-bit Cortex |reg| -M33 CPU with TrustZone |reg| and FPU.
+- Performance benchmark:
+
+  - 1.5 DMPIS/MHz (Drystone 2.1)
+  - 651 CoreMark |reg| (4.07 CoreMark |reg| /MHZ)
+
+- Security and cryptography
+
+  - Arm |reg|  TrustZone |reg| and securable I/Os memories and peripherals
+  - Flexible life cycle scheme with RDP (readout protection) and password protected debug
+  - Root of trust thanks to unique boot entry and secure hide protection area (HDP)
+  - Secure Firmware Installation thanks to embedded Root Secure Services
+  - Secure data storage with hardware unique key (HUK)
+  - Secure Firmware Update support with TF-M
+  - 2 AES coprocessors including one with DPA resistance
+  - Public key accelerator, DPA resistant
+  - On-the-fly decryption of Octo-SPI external memories
+  - HASH hardware accelerator
+  - Active tampers
+  - True Random Number Generator NIST SP800-90B compliant
+  - 96-bit unique ID
+  - 512-byte One-Time Programmable for user data
+  - Active tampers
+
+- Clock management:
+
+  - 4 to 50 MHz crystal oscillator
+  - 32 kHz crystal oscillator for RTC (LSE)
+  - Internal 16 MHz factory-trimmed RC ( |plusminus| 1%)
+  - Internal low-power 32 kHz RC ( |plusminus| 5%)
+  - 2 internal multispeed 100 kHz to 48 MHz oscillators, including one auto-trimmed by
+    LSE (better than  |plusminus| 0.25 % accuracy)
+  - 3 PLLs for system clock, USB, audio, ADC
+  - Internal 48 MHz with clock recovery
+
+- Power management
+
+  - Embedded regulator (LDO)
+  - Embedded SMPS step-down converter supporting switch on-the-fly and voltage scaling
+
+- RTC with HW calendar and calibration
+- Up to 136 fast I/Os, most 5 V-tolerant, up to 14 I/Os with independent supply down to 1.08 V
+- Up to 24 capacitive sensing channels: support touchkey, linear and rotary touch sensors
+- Up to 17 timers and 2 watchdogs
+
+  - 2x 16-bit advanced motor-control
+  - 2x 32-bit and 5 x 16-bit general purpose
+  - 4x low-power 16-bit timers (available in Stop mode)
+  - 2x watchdogs
+  - 2x SysTick timer
+
+- ART accelerator
+
+  - 8-Kbyte instruction cache allowing 0-wait-state execution from Flash and
+    external memories: up to 160 MHz, MPU, 240 DMIPS and DSP
+  - 4-Kbyte data cache for external memories
+
+- Memories
+
+  - 2-Mbyte Flash memory with ECC, 2 banks read-while-write, including 512 Kbytes with 100 kcycles
+  - 786-Kbyte SRAM with ECC OFF or 722-Kbyte SRAM including up to 322-Kbyte SRAM with ECC ON
+  - External memory interface supporting SRAM, PSRAM, NOR, NAND and FRAM memories
+  - 2 Octo-SPI memory interfaces
+
+- Rich analog peripherals (independent supply)
+
+  - 14-bit ADC 2.5-Msps, resolution up to 16 bits with hardware oversampling
+  - 12-bit ADC 2.5-Msps, with hardware oversampling, autonomous in Stop 2 mode
+  - 2 12-bit DAC, low-power sample and hold
+  - 2 operational amplifiers with built-in PGA
+  - 2 ultra-low-power comparators
+
+- Up to 22 communication interfaces
+
+  - USB Type-C / USB power delivery controller
+  - USB OTG 2.0 full-speed controller
+  - 2x SAIs (serial audio interface)
+  - 4x I2C FM+(1 Mbit/s), SMBus/PMBus
+  - 6x USARTs (ISO 7816, LIN, IrDA, modem)
+  - 3x SPIs (5x SPIs with dual OCTOSPI in SPI mode)
+  - 1x FDCAN
+  - 2x SDMMC interface
+  - 16- and 4-channel DMA controllers, functional in Stop mode
+  - 1 multi-function digital filter (6 filters)+ 1 audio digital filter with
+    sound-activity detection
+
+- CRC calculation unit
+- Development support: serial wire debug (SWD), JTAG, Embedded Trace Macrocell |trade|
+
+- Graphic features
+
+  - Chrom-ART Accelerator (DMA2D) for enhanced graphic content creation
+  - 1 digital camera interface
+
+- Mathematical co-processor
+
+ - CORDIC for trigonometric functions acceleration
+ - FMAC (filter mathematical accelerator)
+
+
+
+More information about STM32U585AI can be found here:
+
+- `STM32U585 on www.st.com`_
+- `STM32U585 reference manual`_
+
+
+Supported Features
+==================
+
+The Zephyr b_u585i_iot02a board configuration supports the following hardware features:
+
++-----------+------------+-------------------------------------+
+| Interface | Controller | Driver/Component                    |
++===========+============+=====================================+
+| NVIC      | on-chip    | nested vector interrupt controller  |
++-----------+------------+-------------------------------------+
+| UART      | on-chip    | serial port-polling;                |
+|           |            | serial port-interrupt               |
++-----------+------------+-------------------------------------+
+| PINMUX    | on-chip    | pinmux                              |
++-----------+------------+-------------------------------------+
+| GPIO      | on-chip    | gpio                                |
++-----------+------------+-------------------------------------+
+
+
+The default configuration can be found in the defconfig file:
+
+	``boards/arm/b_u585i_iot02a/b_u585i_iot02a_defconfig``
+
+
+Connections and IOs
+===================
+
+B_U585I_IOT02A Discovery kit has 9 GPIO controllers (from A to I). These controllers are responsible for pin muxing,
+input/output, pull-up, etc.
+
+For mode details please refer to `B U585I IOT02A board User Manual`_.
+
+Default Zephyr Peripheral Mapping:
+----------------------------------
+
+- UART_1 TX/RX : PA9/PA10 (ST-Link Virtual Port Com)
+- LD1 : PH7
+- LD2 : PH6
+- user button : PC13
+
+System Clock
+------------
+
+B_U585I_IOT02A Discovery System Clock could be driven by an internal or external oscillator,
+as well as the main PLL clock. By default the System clock is driven by the PLL clock at 80MHz,
+driven by 16MHz high speed internal oscillator.
+
+Serial Port
+-----------
+
+B_U585I_IOT02A Discovery kit has 4 U(S)ARTs. The Zephyr console output is assigned to UART1.
+Default settings are 115200 8N1.
+
+
+Programming and Debugging
+*************************
+
+Flashing
+========
+
+B_U585I_IOT02A Discovery kit includes an ST-LINK/V2-1 embedded debug tool interface.
+This interface is supported by the openocd version included in Zephyr SDK.
+
+Flashing an application to B_U585I_IOT02A Discovery kit
+-------------------------------------------------------
+
+Connect the B_U585I_IOT02A Discovery kit to your host computer using the USB
+port, then run a serial host program to connect with your Discovery
+board. For example:
+
+.. code-block:: console
+
+   $ minicom -D /dev/ttyACM0
+
+Then, build and flash in the usual way. Here is an example for the
+:ref:`hello_world` application.
+
+.. zephyr-app-commands::
+   :zephyr-app: samples/hello_world
+   :board: b_u585i_iot02a
+   :goals: build flash
+
+You should see the following message on the console:
+
+.. code-block:: console
+
+   Hello World! arm
+
+Debugging
+=========
+
+Debugging
+=========
+
+STM32U5 support is not currently supported in openocd. As a temporary workaround,
+user can use `STMicroelectronics customized version of OpenOCD`_ to debug the
+the B_U585I_IOT02A Discovery kit.
+For this you need to fetch this repo and build openocd following the instructions
+provided in the README of the project. Then, build zephyr project indicating the
+openocd location in west build command.
+
+Here is an example for the :ref:`blinky-sample` application.
+
+.. zephyr-app-commands::
+   :zephyr-app: samples/basic/blinky
+   :board: b_u585i_iot02a
+   :gen-args: -DOPENOCD="<path_to_openocd>/openocd/src/openocd" -DOPENOCD_DEFAULT_PATH="<path_to_openocd>/openocd/tcl/"
+   :goals: build
+
+Then, indicate openocd as the chosen runner in flash and debug commands:
+
+.. zephyr-app-commands::
+   :zephyr-app: samples/basic/blinky
+   :board: b_u585i_iot02a
+   :gen-args: -r openocd
+   :goals: flash
+
+.. zephyr-app-commands::
+   :zephyr-app: samples/basic/blinky
+   :board: nucleo_u575zi_q
+   :gen-args: -r openocd
+   :goals: debug
+
+
+.. _B U585I IOT02A Discovery kit website:
+   https://www.st.com/en/evaluation-tools/b-u585i-iot02a.html
+
+.. _B U585I IOT02A board User Manual:
+   https://www.st.com/resource/en/user_manual/dm00698410.pdf
+
+.. _STM32U585 on www.st.com:
+   https://www.st.com/en/microcontrollers-microprocessors/stm32u575-585.html
+
+.. _STM32U585 reference manual:
+   https://www.st.com/resource/en/reference_manual/rm0456-stm32u575585-armbased-32bit-mcus-stmicroelectronics.pdf
+
+.. _STM32CubeProgrammer:
+   https://www.st.com/en/development-tools/stm32cubeprog.html
+
+.. _STMicroelectronics customized version of OpenOCD:
+   https://github.com/STMicroelectronics/OpenOCD
diff --git a/boards/arm/b_u585i_iot02a/support/openocd.cfg b/boards/arm/b_u585i_iot02a/support/openocd.cfg
new file mode 100644
index 00000000000..75d859aafa7
--- /dev/null
+++ b/boards/arm/b_u585i_iot02a/support/openocd.cfg
@@ -0,0 +1,44 @@
+source [find interface/stlink-dap.cfg]
+
+set WORKAREASIZE 0x8000
+
+transport select "dapdirect_swd"
+
+set CHIPNAME STM32U575ZITxQ
+set BOARDNAME B-U585I-IOT02A
+
+# Enable debug when in low power modes
+set ENABLE_LOW_POWER 1
+
+# Stop Watchdog counters when halt
+set STOP_WATCHDOG 1
+
+# STlink Debug clock frequency
+set CLOCK_FREQ 8000
+
+# Reset configuration
+# use hardware reset, connect under reset
+# connect_assert_srst needed if low power mode application running (WFI...)
+reset_config srst_only srst_nogate connect_assert_srst
+set CONNECT_UNDER_RESET 1
+set CORE_RESET 0
+
+# ACCESS PORT NUMBER
+set AP_NUM 0
+# GDB PORT
+set GDB_PORT 3333
+
+# BCTM CPU variables
+
+source [find target/stm32u5x.cfg]
+
+$_TARGETNAME configure -event gdb-attach {
+	echo "Debugger attaching: halting execution"
+	reset halt
+	gdb_breakpoint_override hard
+}
+
+$_TARGETNAME configure -event gdb-detach {
+	echo "Debugger detaching: resuming execution"
+	resume
+}