boards: Add MAX32666FTHR board
Add MAX32666FTHR board For more information about this board please check https://www.analog.com/ Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
This commit is contained in:
Sadik Ozer
Carles Cufí
parent
6b41240038
commit
e3d457714b
9 changed files with 382 additions and 0 deletions
7
boards/adi/max32666fthr/Kconfig.max32666fthr
Normal file
7
boards/adi/max32666fthr/Kconfig.max32666fthr
Normal file
|
|
@ -0,0 +1,7 @@
|
||||||
|
# MAX32666FTHR boards configuration
|
||||||
|
|
||||||
|
# Copyright (c) 2023-2024 Analog Devices, Inc.
|
||||||
|
# SPDX-License-Identifier: Apache-2.0
|
||||||
|
|
||||||
|
config BOARD_MAX32666FTHR
|
||||||
|
select SOC_MAX32666_CPU0 if BOARD_MAX32666FTHR_MAX32666_CPU0
|
||||||
9
boards/adi/max32666fthr/board.cmake
Normal file
9
boards/adi/max32666fthr/board.cmake
Normal file
|
|
@ -0,0 +1,9 @@
|
||||||
|
# Copyright (c) 2023-2024 Analog Devices, Inc.
|
||||||
|
# SPDX-License-Identifier: Apache-2.0
|
||||||
|
|
||||||
|
board_runner_args(openocd --cmd-pre-init "source [find interface/cmsis-dap.cfg]")
|
||||||
|
board_runner_args(openocd --cmd-pre-init "source [find target/max32665.cfg]")
|
||||||
|
board_runner_args(jlink "--device=MAX32666" "--reset-after-load")
|
||||||
|
|
||||||
|
include(${ZEPHYR_BASE}/boards/common/openocd.board.cmake)
|
||||||
|
include(${ZEPHYR_BASE}/boards/common/jlink.board.cmake)
|
||||||
8
boards/adi/max32666fthr/board.yml
Normal file
8
boards/adi/max32666fthr/board.yml
Normal file
|
|
@ -0,0 +1,8 @@
|
||||||
|
# Copyright (c) 2023-2024 Analog Devices, Inc.
|
||||||
|
# SPDX-License-Identifier: Apache-2.0
|
||||||
|
|
||||||
|
board:
|
||||||
|
name: max32666fthr
|
||||||
|
vendor: adi
|
||||||
|
socs:
|
||||||
|
- name: max32666
|
||||||
BIN
boards/adi/max32666fthr/doc/img/max32666fthr_img1.jpg
Normal file
BIN
boards/adi/max32666fthr/doc/img/max32666fthr_img1.jpg
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 93 KiB |
BIN
boards/adi/max32666fthr/doc/img/max32666fthr_img2.jpg
Normal file
BIN
boards/adi/max32666fthr/doc/img/max32666fthr_img2.jpg
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 91 KiB |
224
boards/adi/max32666fthr/doc/index.rst
Normal file
224
boards/adi/max32666fthr/doc/index.rst
Normal file
|
|
@ -0,0 +1,224 @@
|
||||||
|
.. _max32666_fthr:
|
||||||
|
|
||||||
|
MAX32666FTHR
|
||||||
|
############
|
||||||
|
|
||||||
|
Overview
|
||||||
|
********
|
||||||
|
The MAX32666FTHR board is a rapid development platform to help engineers quickly implement battery
|
||||||
|
optimized Bluetooth® 5 solutions with the MAX32666 Arm® Cortex®-M4 processor with FPU. The board
|
||||||
|
also includes the MAX1555 1-Cell Li+ battery charger for battery management. The form factor is
|
||||||
|
a small 0.9in by 2.0in dualrow header footprint that is compatible with breadboards and
|
||||||
|
off-the-shelf peripheral expansion boards. The board also includes a variety of peripherals,
|
||||||
|
such as a micro SD card connector, 6-axis accelerometer/gyro, RGB indicator LED, and pushbutton.
|
||||||
|
This platform provides poweroptimized flexible for quick proof-of-concepts and early software
|
||||||
|
development to enhance time to market.
|
||||||
|
|
||||||
|
|
||||||
|
The Zephyr port is running on the MAX32666 MCU.
|
||||||
|
|
||||||
|
.. image:: img/max32666fthr_img1.jpg
|
||||||
|
:align: center
|
||||||
|
:alt: MAX32666FTHR Front
|
||||||
|
|
||||||
|
.. image:: img/max32666fthr_img1.jpg
|
||||||
|
:align: center
|
||||||
|
:alt: MAX32666FTHR Back
|
||||||
|
|
||||||
|
Hardware
|
||||||
|
********
|
||||||
|
|
||||||
|
- MAX32666 MCU:
|
||||||
|
|
||||||
|
- High-Efficiency Microcontroller and Audio DSP for Wearable and Hearable Devices
|
||||||
|
|
||||||
|
- Arm Cortex-M4 with FPU Up to 96MHz
|
||||||
|
- Optional Second Arm Cortex-M4 with FPU Optimized for Data Processing
|
||||||
|
- Low-Power 7.3728MHz System Clock Option
|
||||||
|
- 1MB Flash, Organized into Dual Banks 2 x 512KB
|
||||||
|
- 560KB (448KB ECC) SRAM; 3 x 16KB Cache
|
||||||
|
- Optional Error Correction Code (ECC-SEC-DED)for Cache, SRAM, and Internal Flash
|
||||||
|
|
||||||
|
- Bluetooth 5 Low Energy Radio
|
||||||
|
|
||||||
|
- 1Mbps and 2Mbps Data Throughput
|
||||||
|
- Long Range (125kbps and 500kbps)
|
||||||
|
- Advertising Extension
|
||||||
|
- Rx Sensitivity: -95dbm; Tx Power Up to +4.5dbm
|
||||||
|
- On-Chip Matching with Single-Ended Antenna Port
|
||||||
|
|
||||||
|
- Power Management Maximizes Operating Time for Battery Applications
|
||||||
|
|
||||||
|
- Integrated SIMO SMPS for Coin-Cell Operation
|
||||||
|
- Dynamic Voltage Scaling Minimizes Active Core Power Consumption
|
||||||
|
- 27.3μA/MHz at 3.3V Executing from Cache
|
||||||
|
- Selectable SRAM Retention in Low Power Modes with RTC Enabled
|
||||||
|
|
||||||
|
- Multiple Peripherals for System Control
|
||||||
|
|
||||||
|
- Three QSPI Master/Slave with Three Chip Selects Each
|
||||||
|
- Three 4-Wire UARTs
|
||||||
|
- Three I2C Master/Slave
|
||||||
|
- Up to 50 GPIO
|
||||||
|
- QSPI (SPIXF) with Real-Time Flash Decryption
|
||||||
|
- QSPI (SPIXR) RAM Interface Provides SRAMExpansion
|
||||||
|
- 8-Input 10-Bit Delta-Sigma ADC 7.8ksps
|
||||||
|
- USB 2.0 HS Engine with Internal Transceiver
|
||||||
|
- PDM Interface Supports Two Digital Microphones
|
||||||
|
- I2S with TDM
|
||||||
|
- Six 32-Bit Timers
|
||||||
|
- Two High-Speed Timers
|
||||||
|
- 1-Wire Master
|
||||||
|
- Sixteen Pulse Trains (PWM)
|
||||||
|
- Secure Digital Interface Supports SD3.0/SDIO3.0/eMMC4.51
|
||||||
|
|
||||||
|
- Secure Valuable IP/Data with Hardware Security
|
||||||
|
|
||||||
|
- Trust Protection Unit (TPU) with MAA SupportsFast ECDSA and Modular Arithmetic
|
||||||
|
- AES128/192/256, DES, 3DES, Hardware Accelerator
|
||||||
|
- TRNG Seed Generator
|
||||||
|
- SHA-2 Accelerator•Secure Bootloader
|
||||||
|
|
||||||
|
- External devices connected to the MAX32666FTHR:
|
||||||
|
|
||||||
|
- MAX1555 1-Cell Li+ Battery Charger
|
||||||
|
- Breadboard Compatible Headers
|
||||||
|
- 10-Pin Cortex Debug Header
|
||||||
|
- Micro USB Connector
|
||||||
|
- Micro SD Card Connector
|
||||||
|
- RGB Indicator LED and One General Purpose Push Button Switch
|
||||||
|
- 6-Axis Accelerometer/Gyro
|
||||||
|
- Bluetooth Surface Mount Antenna
|
||||||
|
|
||||||
|
|
||||||
|
Supported Features
|
||||||
|
==================
|
||||||
|
|
||||||
|
Below interfaces are supported by Zephyr on MAX32666FTHR.
|
||||||
|
|
||||||
|
+-----------+------------+-------------------------------------+
|
||||||
|
| Interface | Controller | Driver/Component |
|
||||||
|
+===========+============+=====================================+
|
||||||
|
| NVIC | on-chip | nested vector interrupt controller |
|
||||||
|
+-----------+------------+-------------------------------------+
|
||||||
|
| SYSTICK | on-chip | systick |
|
||||||
|
+-----------+------------+-------------------------------------+
|
||||||
|
| CLOCK | on-chip | clock and reset control |
|
||||||
|
+-----------+------------+-------------------------------------+
|
||||||
|
| GPIO | on-chip | gpio |
|
||||||
|
+-----------+------------+-------------------------------------+
|
||||||
|
| UART | on-chip | serial |
|
||||||
|
+-----------+------------+-------------------------------------+
|
||||||
|
|
||||||
|
Connections and IOs
|
||||||
|
===================
|
||||||
|
|
||||||
|
JH3 Pinout
|
||||||
|
**********
|
||||||
|
|
||||||
|
+---------+----------+-------------------------------------------------------------------------------------------------+
|
||||||
|
| Pin | Name | Description |
|
||||||
|
+=========+==========+=================================================================================================+
|
||||||
|
| 1 | GND | Ground |
|
||||||
|
+---------+----------+-------------------------------------------------------------------------------------------------+
|
||||||
|
| 2 | P0_9 | UART0 Tx |
|
||||||
|
+---------+----------+-------------------------------------------------------------------------------------------------+
|
||||||
|
| 3 | P0_10 | UART0 Rx |
|
||||||
|
+---------+----------+-------------------------------------------------------------------------------------------------+
|
||||||
|
| 4 | P0_26 | QSPI2 MISO |
|
||||||
|
+---------+----------+-------------------------------------------------------------------------------------------------+
|
||||||
|
| 5 | P0_25 | QSPI2 MOSI |
|
||||||
|
+---------+----------+-------------------------------------------------------------------------------------------------+
|
||||||
|
| 6 | P0_27 | QSPI2 SCK |
|
||||||
|
+---------+----------+-------------------------------------------------------------------------------------------------+
|
||||||
|
| 7 | AIN_5 | ADC Analog Input. Alternatively, AIN2N or P0_21 |
|
||||||
|
+---------+----------+-------------------------------------------------------------------------------------------------+
|
||||||
|
| 8 | AIN_4 | ADC Analog Input. Alternatively, AIN2P or P0_20 |
|
||||||
|
+---------+----------+-------------------------------------------------------------------------------------------------+
|
||||||
|
| 9 | AIN_3 | ADC Analog Input. Alternatively, AIN1N or P0_19 |
|
||||||
|
+---------+----------+-------------------------------------------------------------------------------------------------+
|
||||||
|
| 10 | AIN_2 | ADC Analog Input. Alternatively, AIN1P or P0_18 |
|
||||||
|
+---------+----------+-------------------------------------------------------------------------------------------------+
|
||||||
|
| 11 | AIN_1 | ADC Analog Input. Alternatively, AIN0N or P0_17 |
|
||||||
|
+---------+----------+-------------------------------------------------------------------------------------------------+
|
||||||
|
| 12 | AIN_0 | ADC Analog Input. Alternatively, AIN0P or P0_16 |
|
||||||
|
+---------+----------+-------------------------------------------------------------------------------------------------+
|
||||||
|
| 13 | GND | Ground |
|
||||||
|
+---------+----------+-------------------------------------------------------------------------------------------------+
|
||||||
|
| 14 | NC | No Connection |
|
||||||
|
+---------+----------+-------------------------------------------------------------------------------------------------+
|
||||||
|
| 15 | 3V3 | 3.3V Output. Typically used to provide 3.3V to peripherals connected to the expansion headers |
|
||||||
|
+---------+----------+-------------------------------------------------------------------------------------------------+
|
||||||
|
| 16 | RSTN | Master Reset Signal |
|
||||||
|
+---------+----------+-------------------------------------------------------------------------------------------------+
|
||||||
|
|
||||||
|
|
||||||
|
JH4 Pinout
|
||||||
|
**********
|
||||||
|
|
||||||
|
+---------+----------+-----------------------------------------------------------------------------------------------------------+
|
||||||
|
| Pin | Name | Description |
|
||||||
|
+=========+==========+===========================================================================================================+
|
||||||
|
| 1 | SYS | SYS switched connection to the Battery. This is the primary system power supply and |
|
||||||
|
| | | automatically switches between the battery voltage and the USB supply when available. |
|
||||||
|
+---------+----------+-----------------------------------------------------------------------------------------------------------+
|
||||||
|
| 2 | PWREN | Power Enable. This is connected to the ON pin of the MAX4995 LDO. It turns off the LDO if shorted to GND. |
|
||||||
|
+---------+----------+-----------------------------------------------------------------------------------------------------------+
|
||||||
|
| 3 | VBUS | USB VBUS Signal. This can be used as a 5V supply when connected to USB. This pin can also be used as |
|
||||||
|
| | | an input to power the board, but this should only be done when not using the USB connector since there is |
|
||||||
|
| | | no circuitry to prevent current from flowing back into the USB connector. |
|
||||||
|
+---------+----------+-----------------------------------------------------------------------------------------------------------+
|
||||||
|
| 4 | P0_12 | 1-Wire master signal |
|
||||||
|
+---------+----------+-----------------------------------------------------------------------------------------------------------+
|
||||||
|
| 5 | P0_3 | SPIXF SCK |
|
||||||
|
+---------+----------+-----------------------------------------------------------------------------------------------------------+
|
||||||
|
| 6 | P0_5 | SPIXF SDIO3 |
|
||||||
|
+---------+----------+-----------------------------------------------------------------------------------------------------------+
|
||||||
|
| 7 | P0_4 | SPIXF SDIO2 |
|
||||||
|
+---------+----------+-----------------------------------------------------------------------------------------------------------+
|
||||||
|
| 8 | P0_2 | SPIXF SDIO1/MISO |
|
||||||
|
+---------+----------+-----------------------------------------------------------------------------------------------------------+
|
||||||
|
| 9 | P0_1 | SPIXF SDIO0/MOSI |
|
||||||
|
+---------+----------+-----------------------------------------------------------------------------------------------------------+
|
||||||
|
| 10 | P0_0 | SPIXF SS0 |
|
||||||
|
+---------+----------+-----------------------------------------------------------------------------------------------------------+
|
||||||
|
| 11 | P0_6 | I2CM0 SCL. Pulled to MAX32666 VDDIOH, connected to BMI160. |
|
||||||
|
+---------+----------+-----------------------------------------------------------------------------------------------------------+
|
||||||
|
| 12 | P0_7 | I2CM0 SDA. Pulled to MAX32666 VDDIOH, connected to BMI160. |
|
||||||
|
+---------+----------+-----------------------------------------------------------------------------------------------------------+
|
||||||
|
|
||||||
|
|
||||||
|
Programming and Debugging
|
||||||
|
*************************
|
||||||
|
|
||||||
|
Flashing
|
||||||
|
========
|
||||||
|
|
||||||
|
The MAX32666 MCU can be flashed by connecting an external debug probe to the SWD port.
|
||||||
|
SWD debug can be accessed through the Cortex 10-pin connector, JH2.
|
||||||
|
Logic levels are fixed to VDDIO (1.8V).
|
||||||
|
|
||||||
|
Once the debug probe is connected to your host computer, then you can simply run the
|
||||||
|
``west flash`` command to write a firmware image into flash.
|
||||||
|
|
||||||
|
.. note::
|
||||||
|
|
||||||
|
This board uses OpenOCD as the default debug interface. You can also use
|
||||||
|
a Segger J-Link with Segger's native tooling by overriding the runner,
|
||||||
|
appending ``--runner jlink`` to your ``west`` command(s). The J-Link should
|
||||||
|
be connected to the standard 2*5 pin debug connector (JH2) using an
|
||||||
|
appropriate adapter board and cable.
|
||||||
|
|
||||||
|
Debugging
|
||||||
|
=========
|
||||||
|
|
||||||
|
Please refer to the `Flashing`_ section and run the ``west debug`` command
|
||||||
|
instead of ``west flash``.
|
||||||
|
|
||||||
|
References
|
||||||
|
**********
|
||||||
|
|
||||||
|
- `MAX32666FTHR web page`_
|
||||||
|
|
||||||
|
.. _MAX32666FTHR web page:
|
||||||
|
https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/MAX32666FTHR.html
|
||||||
107
boards/adi/max32666fthr/max32666fthr_max32666_cpu0.dts
Normal file
107
boards/adi/max32666fthr/max32666fthr_max32666_cpu0.dts
Normal file
|
|
@ -0,0 +1,107 @@
|
||||||
|
/*
|
||||||
|
* Copyright (c) 2023-2024 Analog Devices, Inc.
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: Apache-2.0
|
||||||
|
*/
|
||||||
|
|
||||||
|
/dts-v1/;
|
||||||
|
|
||||||
|
#include <adi/max32/max32666.dtsi>
|
||||||
|
#include <adi/max32/max32666-pinctrl.dtsi>
|
||||||
|
#include <zephyr/dt-bindings/gpio/adi-max32-gpio.h>
|
||||||
|
#include <zephyr/dt-bindings/input/input-event-codes.h>
|
||||||
|
|
||||||
|
/ {
|
||||||
|
model = "Analog Devices MAX32666FTHR";
|
||||||
|
compatible = "adi,max32666fthr";
|
||||||
|
|
||||||
|
chosen {
|
||||||
|
zephyr,console = &uart1;
|
||||||
|
zephyr,shell-uart = &uart1;
|
||||||
|
zephyr,sram = &sram4;
|
||||||
|
zephyr,flash = &flash0;
|
||||||
|
};
|
||||||
|
|
||||||
|
leds {
|
||||||
|
compatible = "gpio-leds";
|
||||||
|
led1: led_1 {
|
||||||
|
gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
|
||||||
|
label = "Red LED";
|
||||||
|
};
|
||||||
|
led2: led_2 {
|
||||||
|
gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
|
||||||
|
label = "Blue LED";
|
||||||
|
};
|
||||||
|
led3: led_3 {
|
||||||
|
gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
|
||||||
|
label = "Green LED";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
buttons {
|
||||||
|
compatible = "gpio-keys";
|
||||||
|
pb1: pb1 {
|
||||||
|
gpios = <&gpio1 10 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
|
||||||
|
label = "SW1";
|
||||||
|
zephyr,code = <INPUT_KEY_0>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
/* These aliases are provided for compatibility with samples */
|
||||||
|
aliases {
|
||||||
|
led0 = &led1;
|
||||||
|
led1 = &led2;
|
||||||
|
led2 = &led3;
|
||||||
|
sw0 = &pb1;
|
||||||
|
};
|
||||||
|
|
||||||
|
/* Used for accessing other pins */
|
||||||
|
feather_header: feather_connector {
|
||||||
|
compatible = "adafruit-feather-header";
|
||||||
|
#gpio-cells = <2>;
|
||||||
|
gpio-map-mask = <0xffffffff 0xffffffc0>;
|
||||||
|
gpio-map-pass-thru = <0 0x3f>;
|
||||||
|
gpio-map = <12 0 &gpio0 7 0>, /* SDA */
|
||||||
|
<13 0 &gpio0 6 0>, /* SCL */
|
||||||
|
<14 0 &gpio0 0 0>, /* GPIO */
|
||||||
|
<15 0 &gpio0 1 0>, /* GPIO */
|
||||||
|
<16 0 &gpio0 2 0>, /* GPIO */
|
||||||
|
<17 0 &gpio0 4 0>, /* GPIO */
|
||||||
|
<18 0 &gpio0 5 0>, /* GPIO */
|
||||||
|
<19 0 &gpio0 3 0>, /* GPIO */
|
||||||
|
<20 0 &gpio0 12 0>, /* OWM */
|
||||||
|
/* 11 not connected */
|
||||||
|
<10 0 &gpio0 9 0>, /* TX */
|
||||||
|
<9 0 &gpio0 10 0>, /* RX */
|
||||||
|
<8 0 &gpio0 26 0>, /* MISO */
|
||||||
|
<7 0 &gpio0 25 0>, /* MOSI */
|
||||||
|
<6 0 &gpio0 27 0>, /* SCK */
|
||||||
|
<5 0 &gpio0 21 0>, /* AIN5 */
|
||||||
|
<4 0 &gpio0 20 0>, /* AIN4 */
|
||||||
|
<3 0 &gpio0 19 0>, /* AIN3 */
|
||||||
|
<2 0 &gpio0 18 0>, /* AIN2 */
|
||||||
|
<1 0 &gpio0 17 0>, /* AIN1 */
|
||||||
|
<0 0 &gpio0 16 0>; /* AIN0 */
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&uart1 {
|
||||||
|
pinctrl-0 = <&uart1_tx_p1_13 &uart1_rx_p1_12>;
|
||||||
|
pinctrl-names = "default";
|
||||||
|
current-speed = <115200>;
|
||||||
|
data-bits = <8>;
|
||||||
|
parity = "none";
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&clk_ipo {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&gpio0 {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&gpio1 {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
14
boards/adi/max32666fthr/max32666fthr_max32666_cpu0.yaml
Normal file
14
boards/adi/max32666fthr/max32666fthr_max32666_cpu0.yaml
Normal file
|
|
@ -0,0 +1,14 @@
|
||||||
|
identifier: max32666fthr/max32666/cpu0
|
||||||
|
name: max32666fthr cpu0
|
||||||
|
vendor: adi
|
||||||
|
type: mcu
|
||||||
|
arch: arm
|
||||||
|
toolchain:
|
||||||
|
- zephyr
|
||||||
|
- gnuarmemb
|
||||||
|
- xtools
|
||||||
|
supported:
|
||||||
|
- gpio
|
||||||
|
- serial
|
||||||
|
ram: 560
|
||||||
|
flash: 1024
|
||||||
13
boards/adi/max32666fthr/max32666fthr_max32666_cpu0_defconfig
Normal file
13
boards/adi/max32666fthr/max32666fthr_max32666_cpu0_defconfig
Normal file
|
|
@ -0,0 +1,13 @@
|
||||||
|
# Copyright (c) 2023-2024 Analog Devices, Inc.
|
||||||
|
# SPDX-License-Identifier: Apache-2.0
|
||||||
|
|
||||||
|
# Enable GPIO
|
||||||
|
CONFIG_GPIO=y
|
||||||
|
|
||||||
|
# Console
|
||||||
|
CONFIG_CONSOLE=y
|
||||||
|
CONFIG_UART_CONSOLE=y
|
||||||
|
|
||||||
|
# enable uart driver
|
||||||
|
CONFIG_SERIAL=y
|
||||||
|
CONFIG_UART_INTERRUPT_DRIVEN=y
|
||||||
Loading…
Add table
Add a link
Reference in a new issue