michaelh/zephyr
1
0
Fork 0
Code Releases Activity

ext: mcux: Update to mcux 2.1 for k64

Browse source 
Updates the mcux drivers and device header files for the k64 from mcux
2.0 to mcux 2.1.

Origin: NXP MCUXpresso SDK 2.1
URL: mcux.nxp.com
Maintained-by: External

Change-Id: Ic83acfa91b575550c92ccc124d94ecd8fdac1f57
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This commit is contained in:
Maureen Helm 2017-03-03 11:02:51 -06:00 • committed by Kumar Gala
commit e0b56a7076
79 changed files with 6373 additions and 4217 deletions
Download patch file Download diff file Expand all files Collapse all files

52
ext/hal/nxp/mcux/drivers/fsl_smc.c
View file

@ -29,6 +29,7 @@
*/
#include "fsl_smc.h"
#include "fsl_flash.h"
#if (defined(FSL_FEATURE_SMC_HAS_PARAM) && FSL_FEATURE_SMC_HAS_PARAM)
void SMC_GetParam(SMC_Type *base, smc_param_t *param)
@ -41,6 +42,39 @@ void SMC_GetParam(SMC_Type *base, smc_param_t *param)
}
#endif /* FSL_FEATURE_SMC_HAS_PARAM */
void SMC_PreEnterStopModes(void)
{
flash_prefetch_speculation_status_t speculationStatus =
{
kFLASH_prefetchSpeculationOptionDisable, /* Disable instruction speculation.*/
kFLASH_prefetchSpeculationOptionDisable, /* Disable data speculation.*/
};
__disable_irq();
__ISB();
/*
* Before enter stop modes, the flash cache prefetch should be disabled.
* Otherwise the prefetch might be interrupted by stop, then the data and
* and instruction from flash are wrong.
*/
FLASH_PflashSetPrefetchSpeculation(&speculationStatus);
}
void SMC_PostExitStopModes(void)
{
flash_prefetch_speculation_status_t speculationStatus =
{
kFLASH_prefetchSpeculationOptionEnable, /* Enable instruction speculation.*/
kFLASH_prefetchSpeculationOptionEnable, /* Enable data speculation.*/
};
FLASH_PflashSetPrefetchSpeculation(&speculationStatus);
__enable_irq();
__ISB();
}
status_t SMC_SetPowerModeRun(SMC_Type *base)
{
uint8_t reg;
@ -73,7 +107,9 @@ status_t SMC_SetPowerModeWait(SMC_Type *base)
{
/* configure Normal Wait mode */
SCB->SCR &= ~SCB_SCR_SLEEPDEEP_Msk;
__DSB();
__WFI();
__ISB();
return kStatus_Success;
}
@ -101,7 +137,9 @@ status_t SMC_SetPowerModeStop(SMC_Type *base, smc_partial_stop_option_t option)
/* read back to make sure the configuration valid before enter stop mode */
(void)base->PMCTRL;
__DSB();
__WFI();
__ISB();
/* check whether the power mode enter Stop mode succeed */
if (base->PMCTRL & SMC_PMCTRL_STOPA_MASK)
@ -148,16 +186,12 @@ status_t SMC_SetPowerModeVlpr(SMC_Type *base
status_t SMC_SetPowerModeVlpw(SMC_Type *base)
{
/* Power mode transaction to VLPW can only happen in VLPR mode */
if (kSMC_PowerStateVlpr != SMC_GetPowerModeState(base))
{
return kStatus_Fail;
}
/* configure VLPW mode */
/* Set the SLEEPDEEP bit to enable deep sleep mode */
SCB->SCR &= ~SCB_SCR_SLEEPDEEP_Msk;
__DSB();
__WFI();
__ISB();
return kStatus_Success;
}
@ -177,7 +211,9 @@ status_t SMC_SetPowerModeVlps(SMC_Type *base)
/* read back to make sure the configuration valid before enter stop mode */
(void)base->PMCTRL;
__DSB();
__WFI();
__ISB();
/* check whether the power mode enter VLPS mode succeed */
if (base->PMCTRL & SMC_PMCTRL_STOPA_MASK)
@ -231,7 +267,9 @@ status_t SMC_SetPowerModeLls(SMC_Type *base
/* read back to make sure the configuration valid before enter stop mode */
(void)base->PMCTRL;
__DSB();
__WFI();
__ISB();
/* check whether the power mode enter LLS mode succeed */
if (base->PMCTRL & SMC_PMCTRL_STOPA_MASK)
@ -345,7 +383,9 @@ status_t SMC_SetPowerModeVlls(SMC_Type *base, const smc_power_mode_vlls_config_t
/* read back to make sure the configuration valid before enter stop mode */
(void)base->PMCTRL;
__DSB();
__WFI();
__ISB();
/* check whether the power mode enter LLS mode succeed */
if (base->PMCTRL & SMC_PMCTRL_STOPA_MASK)