boards: stm32f030_demo: Use dts for clocks configuration

Convert board to use of device tree for clocks configuration.

Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
This commit is contained in:
Alexandre Bourdiol 2021-04-30 17:35:44 +02:00 committed by Kumar Gala
commit e04e228ea5
2 changed files with 20 additions and 16 deletions

View file

@ -32,6 +32,25 @@
}; };
}; };
&clk_hse {
clock-frequency = <DT_FREQ_M(8)>;
status = "okay";
};
&pll {
prediv = <1>;
mul = <6>;
clocks = <&clk_hse>;
status = "okay";
};
&rcc {
clocks = <&pll>;
clock-frequency = <DT_FREQ_M(48)>;
ahb-prescaler = <1>;
apb1-prescaler = <1>;
};
/* Due to limited available memory, don't enable gpioc,d,e,f */ /* Due to limited available memory, don't enable gpioc,d,e,f */
&gpioc {status = "disabled";}; &gpioc {status = "disabled";};
&gpiod {status = "disabled";}; &gpiod {status = "disabled";};

View file

@ -6,9 +6,6 @@ CONFIG_SOC_SERIES_STM32F0X=y
# Platform Configuration # Platform Configuration
CONFIG_SOC_STM32F030X4=y CONFIG_SOC_STM32F030X4=y
# General Kernel Options
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=48000000
# Kernel Options due to Low Memory (4k) # Kernel Options due to Low Memory (4k)
CONFIG_MAIN_STACK_SIZE=640 CONFIG_MAIN_STACK_SIZE=640
CONFIG_IDLE_STACK_SIZE=200 CONFIG_IDLE_STACK_SIZE=200
@ -29,17 +26,5 @@ CONFIG_PINMUX=y
# GPIO Controller # GPIO Controller
CONFIG_GPIO=y CONFIG_GPIO=y
# Clock configuration # Enable Clocks
CONFIG_CLOCK_CONTROL=y CONFIG_CLOCK_CONTROL=y
# SYSCLK selection
CONFIG_CLOCK_STM32_SYSCLK_SRC_PLL=y
# HSE configuration
CONFIG_CLOCK_STM32_HSE_CLOCK=8000000
# PLL configuration
CONFIG_CLOCK_STM32_PLL_SRC_HSE=y
# produce 48MHz clock at PLL output
CONFIG_CLOCK_STM32_PLL_PREDIV=1
CONFIG_CLOCK_STM32_PLL_MULTIPLIER=6
CONFIG_CLOCK_STM32_AHB_PRESCALER=1
CONFIG_CLOCK_STM32_APB1_PRESCALER=1