kconfig: tweak Kconfig prompts

Tweak some Kconfig prompts after the removal of "Enable...".

Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>

Kconfig.zephyr

@@ -221,7 +221,7 @@ config SRAM_OFFSET
 menu "Linker Sections"
 
 config LINKER_USE_BOOT_SECTION
-	bool "Usage of Boot Linker Section"
+	bool "Use Boot Linker Section"
 	help
 	  If enabled, the symbols which are needed for the boot process
 	  will be put into another linker section reserved for these
@@ -231,7 +231,7 @@ config LINKER_USE_BOOT_SECTION
 	  board or custom linker script.
 
 config LINKER_USE_PINNED_SECTION
-	bool "Usage of Pinned Linker Section"
+	bool "Use Pinned Linker Section"
 	help
 	  If enabled, the symbols which need to be pinned in memory
 	  will be put into another linker section reserved for pinned

arch/arc/Kconfig

@@ -325,7 +325,7 @@ menu "ARC MPU Options"
 depends on CPU_HAS_MPU
 
 config ARC_MPU_ENABLE
-	bool "MPU"
+	bool "Memory Protection Unit (MPU)"
 	select ARC_MPU
 	help
 	  Enable MPU

arch/arm/core/aarch32/cortex_m/Kconfig

@@ -326,7 +326,7 @@ config SW_VECTOR_RELAY_CLIENT
 	  initialization.
 
 config CORTEX_M_DWT
-	bool "And use the DWT"
+	bool "Data Watchpoint and Trace (DWT)"
 	depends on CPU_CORTEX_M_HAS_DWT
 	default y if TIMING_FUNCTIONS
 	help
@@ -345,7 +345,7 @@ endmenu
 # Trace Unit and the Debug Monitor Exception, or the Memory Protection Unit.
 
 choice NULL_POINTER_EXCEPTION_DETECTION
-	bool "And use null-pointer exception"
+	bool "Null-pointer exception"
 	# Disable this until https://github.com/zephyrproject-rtos/zephyr/issues/32984 is fixed
 	# default NULL_POINTER_EXCEPTION_DETECTION_DWT if TEST_ARM_CORTEX_M && !ARM_NONSECURE_FIRMWARE && CPU_CORTEX_M_HAS_DWT
 	default NULL_POINTER_EXCEPTION_DETECTION_MPU if TEST_ARM_CORTEX_M && !ARM_NONSECURE_FIRMWARE && ARM_MPU && !CPU_CORTEX_M_HAS_DWT
@@ -358,7 +358,7 @@ choice NULL_POINTER_EXCEPTION_DETECTION
 	  is enabled and the DWT-based solution is preferred.
 
 config NULL_POINTER_EXCEPTION_DETECTION_NONE
-	bool "Do not enable null pointer exception detection"
+	bool "No null pointer exception detection"
 	help
 	  Null pointer exception detection feature is not
 	  enabled.

drivers/ethernet/Kconfig.stm32_hal

@@ -97,14 +97,14 @@ config ETH_STM32_AUTO_NEGOTIATION_ENABLE
 if !ETH_STM32_AUTO_NEGOTIATION_ENABLE
 
 config ETH_STM32_SPEED_10M
-	bool "This if using 10 Mbps for speed when autonegotiation is diabled"
+	bool "Set speed to 10 Mbps when autonegotiation is diabled"
 	default n
 	help
 	  Set this if using 10 Mbps and when autonegotiation is disabled, otherwise speed
 	  is 100 Mbps
 
 config ETH_STM32_MODE_HALFDUPLEX
-	bool "This if using half duplex"
+	bool "Half duplex mode"
 	default n
 	help
 	  Set this if using half duplex when autonegotiation is disabled otherwise

drivers/i2s/Kconfig.stm32

@@ -22,7 +22,7 @@ config I2S_STM32_TX_BLOCK_COUNT
 	default 4
 
 config I2S_STM32_USE_PLLI2S_ENABLE
-	bool "Usage of PLL"
+	bool "Use PLL"
 	help
 	  Enable it if I2S clock should be provided by the PLLI2S.
 	  If not enabled the clock will be provided by HSI/HSE.

drivers/ieee802154/Kconfig

@@ -13,7 +13,7 @@ menuconfig IEEE802154
 if IEEE802154
 
 config IEEE802154_NET_IF_NO_AUTO_START
-	bool "Disable 802.15.4 interface auto-start"
+	bool "IEEE 802.15.4 interface without auto-start"
 	help
 	  This option allows user to set any configuration and/or filter before
 	  the radio becomes operational. For instance, the EUI-64 value can be
@@ -26,7 +26,7 @@ config IEEE802154_NET_IF_NO_AUTO_START
 	  have any doubt about this option leave it as default value.
 
 config IEEE802154_RAW_MODE
-	bool "Use IEEE 802.15.4 driver without the MAC stack"
+	bool "IEEE 802.15.4 driver without the MAC stack"
 	select NET_RAW_MODE
 	help
 	  This option enables using the drivers in a so-called "raw" mode,
@@ -40,7 +40,7 @@ config IEEE802154_RDEV
 	  PHY is a ranging-capable device (RDEV)
 
 config IEEE802154_VENDOR_OUI_ENABLE
-	bool "Setting Vendor Organizationally Unique Identifier"
+	bool "Support setting Vendor Organizationally Unique Identifier"
 	help
 	  This option enables setting custom vendor
 	  OUI using IEEE802154_VENDOR_OUI. After enabling,

drivers/ieee802154/Kconfig.nrf5

@@ -44,7 +44,7 @@ config IEEE802154_NRF5_EXT_IRQ_MGMT
 	  a radio arbiter used in dynamic multiprotocol applications.
 
 config IEEE802154_NRF5_UICR_EUI64_ENABLE
-	bool "Using EUI64 value stored in UICR registers"
+	bool "Support usage of EUI64 value stored in UICR registers"
 	depends on !IEEE802154_VENDOR_OUI_ENABLE
 	depends on SOC_SERIES_NRF52X || SOC_SERIES_NRF53X
 	help

drivers/led_strip/Kconfig.ws2812

@@ -20,14 +20,14 @@ choice WS2812_STRIP_DRIVER
 	depends on WS2812_STRIP
 
 config WS2812_STRIP_SPI
-	bool "The SPI driver"
+	bool "SPI driver"
 	depends on SPI
 	help
 	  The SPI driver is portable, but requires significantly more
 	  memory (1 byte of overhead per bit of pixel data).
 
 config WS2812_STRIP_GPIO
-	bool "The GPIO driver"
+	bool "GPIO driver"
 	# Only an Cortex-M0 inline assembly implementation for the nRF51
 	# is supported currently.
 	depends on SOC_SERIES_NRF51X

drivers/misc/grove_lcd_rgb/Kconfig

@@ -6,7 +6,7 @@ module-str = grove_lcd_rgb
 source "subsys/logging/Kconfig.template.log_config"
 
 config GROVE_LCD_RGB
-	bool "The Seeed Grove LCD RGB Backlight"
+	bool "Seeed Grove LCD RGB Backlight"
 	help
 	  Setting this value will enable driver support for the Groove-LCD RGB
 	  Backlight.

drivers/modem/Kconfig

@@ -126,7 +126,7 @@ config MODEM_SHELL
 	  sending a command to the modem UART.
 
 config MODEM_SIM_NUMBERS
-	bool "Querying the SIM for IMSI and ICCID"
+	bool "Query the SIM for IMSI and ICCID"
 	depends on MODEM_SHELL
 	default y
 	help
@@ -134,7 +134,7 @@ config MODEM_SIM_NUMBERS
 	  can be disabled if the application does not use a SIM.
 
 config MODEM_CELL_INFO
-	bool "Querying for operator and cell info"
+	bool "Query for operator and cell info"
 	depends on MODEM_SHELL
 	help
 	  Query for numerical operator id, location area code and cell id.

lib/os/Kconfig.heap

@@ -35,7 +35,7 @@ config SYS_HEAP_RUNTIME_STATS
 	  Gather system heap runtime statistics.
 
 config SYS_HEAP_LISTENER
-	bool "Sys_heap event notifications"
+	bool "sys_heap event notifications"
 	select HEAP_LISTENER
 	help
 	  This allows application to listen for sys_heap events,

modules/mbedtls/Kconfig.tls-generic

@@ -62,16 +62,16 @@ config MBEDTLS_KEY_EXCHANGE_ALL_ENABLED
 	select MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
 
 config MBEDTLS_KEY_EXCHANGE_PSK_ENABLED
-	bool "The PSK based ciphersuite modes"
+	bool "PSK based ciphersuite modes"
 
 config MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED
-	bool "The DHE-PSK based ciphersuite modes"
+	bool "DHE-PSK based ciphersuite modes"
 
 config MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED
-	bool "The ECDHE-PSK based ciphersuite modes"
+	bool "ECDHE-PSK based ciphersuite modes"
 
 config MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED
-	bool "The RSA-PSK based ciphersuite modes"
+	bool "RSA-PSK based ciphersuite modes"
 
 config MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED
 	bool
@@ -88,29 +88,29 @@ config MBEDTLS_PSK_MAX_LEN
 	  Max size of TLS pre-shared keys, in bytes.
 
 config MBEDTLS_KEY_EXCHANGE_RSA_ENABLED
-	bool "The RSA-only based ciphersuite modes"
+	bool "RSA-only based ciphersuite modes"
 	default y if !NET_L2_OPENTHREAD
 
 config MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED
-	bool "The DHE-RSA based ciphersuite modes"
+	bool "DHE-RSA based ciphersuite modes"
 
 config MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED
-	bool "The ECDHE-RSA based ciphersuite modes"
+	bool "ECDHE-RSA based ciphersuite modes"
 
 config MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
-	bool "The ECDHE-ECDSA based ciphersuite modes"
+	bool "ECDHE-ECDSA based ciphersuite modes"
 
 config MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED
-	bool "The ECDH-ECDSA based ciphersuite modes"
+	bool "ECDH-ECDSA based ciphersuite modes"
 
 config MBEDTLS_ECDSA_DETERMINISTIC
 	bool "Deterministic ECDSA (RFC 6979)"
 
 config MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED
-	bool "The ECDH-RSA based ciphersuite modes"
+	bool "ECDH-RSA based ciphersuite modes"
 
 config MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
-	bool "The ECJPAKE based ciphersuite modes"
+	bool "ECJPAKE based ciphersuite modes"
 
 if MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED || \
 	MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED || \
@@ -216,7 +216,7 @@ config MBEDTLS_CIPHER_ALL_ENABLED
 	select MBEDTLS_CHACHAPOLY_AEAD_ENABLED
 
 config MBEDTLS_CIPHER_AES_ENABLED
-	bool "The AES block cipher"
+	bool "AES block cipher"
 	default y
 
 config MBEDTLS_AES_ROM_TABLES
@@ -225,27 +225,27 @@ config MBEDTLS_AES_ROM_TABLES
 	default y
 
 config MBEDTLS_CIPHER_CAMELLIA_ENABLED
-	bool "The Camellia block cipher"
+	bool "Camellia block cipher"
 
 config MBEDTLS_CIPHER_DES_ENABLED
-	bool "The DES block cipher"
+	bool "DES block cipher"
 	default y if !NET_L2_OPENTHREAD
 
 config MBEDTLS_CIPHER_ARC4_ENABLED
-	bool "The ARC4 stream cipher"
+	bool "ARC4 stream cipher"
 
 config MBEDTLS_CIPHER_CHACHA20_ENABLED
-	bool "The ChaCha20 stream cipher"
+	bool "ChaCha20 stream cipher"
 
 config MBEDTLS_CIPHER_BLOWFISH_ENABLED
-	bool "The Blowfish block cipher"
+	bool "Blowfish block cipher"
 
 config MBEDTLS_CIPHER_CCM_ENABLED
-	bool "The Counter with CBC-MAC (CCM) mode for 128-bit block cipher"
+	bool "Counter with CBC-MAC (CCM) mode for 128-bit block cipher"
 	depends on MBEDTLS_CIPHER_AES_ENABLED || MBEDTLS_CIPHER_CAMELLIA_ENABLED
 
 config MBEDTLS_CIPHER_GCM_ENABLED
-	bool "The Galois/Counter Mode (GCM) for AES"
+	bool "Galois/Counter Mode (GCM) for AES"
 	depends on MBEDTLS_CIPHER_AES_ENABLED || MBEDTLS_CIPHER_CAMELLIA_ENABLED
 
 config MBEDTLS_CIPHER_MODE_XTS_ENABLED
@@ -260,7 +260,7 @@ config MBEDTLS_CIPHER_MODE_CTR_ENABLED
 	bool "Counter Block Cipher mode (CTR) for symmetric ciphers."
 
 config MBEDTLS_CHACHAPOLY_AEAD_ENABLED
-	bool "The ChaCha20-Poly1305 AEAD algorithm"
+	bool "ChaCha20-Poly1305 AEAD algorithm"
 	depends on MBEDTLS_CIPHER_CHACHA20_ENABLED || MBEDTLS_MAC_POLY1305_ENABLED
 
 comment "Supported message authentication methods"
@@ -276,18 +276,18 @@ config MBEDTLS_MAC_ALL_ENABLED
 	select MBEDTLS_MAC_CMAC_ENABLED
 
 config MBEDTLS_MAC_MD4_ENABLED
-	bool "The MD4 hash algorithm"
+	bool "MD4 hash algorithm"
 
 config MBEDTLS_MAC_MD5_ENABLED
-	bool "The MD5 hash algorithm"
+	bool "MD5 hash algorithm"
 	default y if !NET_L2_OPENTHREAD
 
 config MBEDTLS_MAC_SHA1_ENABLED
-	bool "The SHA1 hash algorithm"
+	bool "SHA1 hash algorithm"
 	default y if !NET_L2_OPENTHREAD
 
 config MBEDTLS_MAC_SHA256_ENABLED
-	bool "The SHA-224 and SHA-256 hash algorithms"
+	bool "SHA-224 and SHA-256 hash algorithms"
 	default y
 
 config MBEDTLS_SHA256_SMALLER
@@ -299,13 +299,13 @@ config MBEDTLS_SHA256_SMALLER
 	  lower performance
 
 config MBEDTLS_MAC_SHA512_ENABLED
-	bool "The SHA-384 and SHA-512 hash algorithms"
+	bool "SHA-384 and SHA-512 hash algorithms"
 
 config MBEDTLS_MAC_POLY1305_ENABLED
-	bool "The Poly1305 MAC algorithm"
+	bool "Poly1305 MAC algorithm"
 
 config MBEDTLS_MAC_CMAC_ENABLED
-	bool "The CMAC (Cipher-based Message Authentication Code) mode for block ciphers."
+	bool "CMAC (Cipher-based Message Authentication Code) mode for block ciphers."
 	depends on MBEDTLS_CIPHER_AES_ENABLED || MBEDTLS_CIPHER_DES_ENABLED
 
 endmenu
@@ -313,24 +313,24 @@ endmenu
 comment "Random number generators"
 
 config MBEDTLS_CTR_DRBG_ENABLED
-	bool "The CTR_DRBG AES-256-based random generator"
+	bool "CTR_DRBG AES-256-based random generator"
 	depends on MBEDTLS_CIPHER_AES_ENABLED
 	default y
 
 config MBEDTLS_HMAC_DRBG_ENABLED
-	bool "The HMAC_DRBG random generator"
+	bool "HMAC_DRBG random generator"
 	select MBEDTLS_MD
 
 comment "Other configurations"
 
 config MBEDTLS_CIPHER
-	bool "The generic cipher layer."
+	bool "generic cipher layer."
 
 config MBEDTLS_MD
-	bool "The generic message digest layer."
+	bool "generic message digest layer."
 
 config MBEDTLS_GENPRIME_ENABLED
-	bool "The prime-number generation code."
+	bool "prime-number generation code."
 
 config MBEDTLS_PEM_CERTIFICATE_FORMAT
 	bool "Support for PEM certificate format"

soc/arm/atmel_sam0/common/Kconfig.samd2x

@@ -3,14 +3,14 @@
 if SOC_SERIES_SAMD20 || SOC_SERIES_SAMD21 || SOC_SERIES_SAMR21
 
 config SOC_ATMEL_SAMD_XOSC32K
-	bool "The external 32 kHz crystal oscillator"
+	bool "External 32 kHz crystal oscillator"
 	help
 	  Say y to enable the external 32 kHZ crystal oscillator at
 	  startup.  This can then be selected as the main clock source
 	  for the SOC.
 
 config SOC_ATMEL_SAMD_XOSC
-	bool "The external crystal oscillator"
+	bool "External crystal oscillator"
 	help
 	  Say y to enable the external crystal oscillator at startup.
 

soc/arm/nordic_nrf/Kconfig

@@ -120,7 +120,7 @@ config NRF_SECURE_APPROTECT_USER_HANDLING
 endchoice
 
 config NRF_TRACE_PORT
-	bool "NRF TPIU"
+	bool "nRF TPIU"
 	depends on !SOC_SERIES_NRF51X
 	help
 	  Enable this option to initialize the TPIU (Trace Port Interface

soc/arm/nordic_nrf/nrf91/Kconfig.soc

@@ -69,6 +69,6 @@ config SOC_NRF9160_SICA
 endchoice
 
 config NRF_ENABLE_ICACHE
-	bool "The instruction cache (I-Cache)"
+	bool "Instruction cache (I-Cache)"
 	depends on SOC_NRF9160
 	default y

soc/arm/nxp_imx/rt/Kconfig.soc

@@ -621,7 +621,7 @@ config PM_MCUX_PMU
 	bool "MCUX power management unit driver"
 
 menuconfig NXP_IMX_RT_BOOT_HEADER
-	bool "The boot header"
+	bool "Boot header"
 	depends on !BOOTLOADER_MCUBOOT
 	help
 	  Enable data structures required by the boot ROM to boot the

soc/arm/nxp_imx/rt6xx/Kconfig.soc

@@ -78,7 +78,7 @@ config SYSOSC_SETTLING_US
 	  board's defconfig.
 
 menuconfig NXP_IMX_RT6XX_BOOT_HEADER
-	bool "The boot header"
+	bool "Boot header"
 	depends on !BOOTLOADER_MCUBOOT
 	help
 	  Enable data structures required by the boot ROM to boot the

soc/arm/nxp_kinetis/ke1xf/Kconfig.soc

@@ -98,7 +98,7 @@ config WDOG_INITIAL_TIMEOUT
 	  milliseconds.
 
 config KINETIS_KE1XF_ENABLE_CODE_CACHE
-	bool "The code cache"
+	bool "Code cache"
 	default y
 
 endif # SOC_SERIES_KINETIS_KE1XF

subsys/bluetooth/Kconfig

@@ -155,7 +155,7 @@ config BT_HCI_ACL_FLOW_CONTROL
 	  not run out of incoming ACL buffers.
 
 config BT_REMOTE_VERSION
-	bool "Fetching of remote version"
+	bool "Allow fetching of remote version"
 	# Enable if building a Controller-only build
 	default y if BT_HCI_RAW
 	help