boards: ti: lp_mspm0g3507: Add initial support TI LP_MSPM0G3507 board

Add initial support for Texas Instruments LP_MSPM0G3507 Launchpad.

Signed-off-by: Saravanan Sekar <saravanan@linumiz.com>
Signed-off-by: Jackson Farley <j-farley@ti.com>

boards/ti/lp_mspm0g3507/Kconfig.lp_mspm0g3507

@@ -0,0 +1,5 @@
+# Copyright (c) 2025 Texas Instruments
+# SPDX-License-Identifier: Apache-2.0
+
+config BOARD_LP_MSPM0G3507
+	select SOC_MSPM0G3507

boards/ti/lp_mspm0g3507/board.cmake

@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: Apache-2.0
+
+board_runner_args(jlink "--device=MSPM0G3507" "--speed=4000")
+include(${ZEPHYR_BASE}/boards/common/openocd.board.cmake)
+include(${ZEPHYR_BASE}/boards/common/jlink.board.cmake)

boards/ti/lp_mspm0g3507/board.yml

@@ -0,0 +1,6 @@
+board:
+  name: lp_mspm0g3507
+  full_name: MSPM0G3507 Launchpad
+  vendor: ti
+  socs:
+    - name: mspm0g3507

boards/ti/lp_mspm0g3507/doc/index.rst

@@ -0,0 +1,160 @@
+.. zephyr:board:: lp_mspm0g3507
+
+Overview
+********
+
+MSPM0G350x microcontrollers (MCUs) are part of the MSP highly integrated, ultra-low-power 32-bit MCU
+family based on the enhanced Arm® Cortex®-M0+ 32-bit core platform operating at up to 80-MHz frequency.
+These cost-optimized MCUs offer high-performance analog peripheral integration, support extended temperature
+ranges from -40°C to 125°C, and operate with supply voltages ranging from 1.62 V to 3.6 V.
+
+The MSPM0G350x devices provide up to 128KB embedded flash program memory with built-in error correction
+code (ECC) and up to 32KB SRAM with a hardware parity option. These MCUs also incorporate a
+memory protection unit, 7-channel DMA, math accelerator, and a variety of peripherals including
+
+* Analog.
+
+  * Two 12-bit 4-Msps ADCs.
+
+  * Configurable internal shared voltage reference.
+
+  * One 12-bit 1-Msps DAC.
+
+  * Three high speed comparators with built-in reference DACs.
+
+  * Two zero-drift zero-crossover op-amps with programmable gain.
+
+* Digital.
+
+  * Two 16-bit advanced control timers.
+
+  * Five general-purpose timers.
+
+    * One 16-bit general-purpose timer for QEI interface.
+
+    * One 32-bit high resolution general-purpose timer.
+
+    * Two 16-bit timers with deadband support and up to 12 PWM Channels.
+
+  * Two windowed-watchdog timers.
+
+  * One RTC with alarm and calendar modes.
+
+* Data Integrity and Encryption.
+
+  * One AES HW accelerator capable of CTR, CBC, and ECB modes.
+
+  * One Cyclic Redundancy Check (CRC) accelerator.
+
+  * One True Random Number Generator (TRNG).
+
+* Communication.
+
+  * Four UARTs, one with support for advanced modes such as LIN and Manchester.
+
+  * Two I2C supporting SMBUS/PMBUS and speeds up to FM+ (1Mbits/s).
+
+  * Two SPI, one with max speed 32Mbits/s.
+
+  * One CAN interface supporting CAN 2.0 A or B and CAN-FD.
+
+.. image:: img/lp_mspm0g3507.webp
+     :align: center
+     :alt: MSPM0G3507 LaunchPad development board
+
+Zephyr uses the ``lp_mspm0g3507`` board for building LP_MSPM0G3507
+
+Features:
+*********
+
+- Onboard XDS110 debug probe
+- EnergyTrace technology available for ultra-low-power debugging
+- 2 buttons, 1 LED and 1 RGB LED for user interaction
+- Temperature sensor circuit
+- Light sensor circuit
+- External OPA2365 (default buffer mode) for ADC (up to 4 Msps) evaluation
+- Onboard 32.768-kHz and 40-MHz crystals
+- RC filter for ADC input (unpopulated by default)
+
+Details on the MSPM0G3507 LaunchPad can be found on the `TI LP_MSPM0G3507 Product Page`_.
+
+Supported Features
+==================
+
+.. zephyr:board-supported-hw::
+
+Building and Flashing
+*********************
+
+Building
+========
+
+Follow the :ref:`getting_started` instructions for Zephyr application development.
+
+For example, to build the blinky application for the MSPM0G3507 LaunchPad:
+
+.. zephyr-app-commands::
+   :zephyr-app: samples/hello_world
+   :board: lp_mspm0g3507
+   :goals: build
+
+The resulting ``zephyr.bin`` binary in the build directory can be flashed onto
+MSPM0G3507 LaunchPad using the steps mentioned below.
+
+Flashing
+========
+
+Open OCD is used to program the flash memory on the devices. It may be necessary in
+earlier versions to use a branch of open OCD onto the device.
+
+Before OpenOCD is public, one can clone `This Repo <https://github.com/openocd-org/openocd.git>`_,
+and then this can be built with
+
+```
+cd <cloned_OPENOCD_dir>
+./bootstrap (when building from the git repository)
+./configure
+make
+sudo make install
+```
+
+Then after the build, it is possible to flash the device by passing additional arguments to the flash command
+
+```
+west flash --openocd <path to cloned dir>/src/openocd --openocd-search <path to cloned dir>/tcl
+```
+
+Flashing using JLINK
+
+```
+west flash --runner=jlink
+```
+
+Debugging
+=========
+
+You can debug an application in the usual way. Here is an example for the
+:zephyr:code-sample:`hello_world` application.
+
+.. zephyr-app-commands::
+   :zephyr-app: samples/hello_world
+   :board: lp_mspm0g3507
+   :goals: debug
+
+References
+**********
+
+TI MSPM0 MCU Page:
+   https://www.ti.com/microcontrollers-mcus-processors/arm-based-microcontrollers/arm-cortex-m0-mcus/overview.html
+
+TI MSPM0G3507 Product Page:
+   https://www.ti.com/product/MSPM0G3507
+
+TI MSPM0 SDK:
+   https://www.ti.com/tool/MSPM0-SDK
+
+.. _MSPM0G3507 TRM:
+   https://www.ti.com/lit/slau846
+
+.. _TI LP_MSPM0G3507 Product Page:
+   https://www.ti.com/tool/LP-MSPM0G3507

boards/ti/lp_mspm0g3507/lp_mspm0g3507.dts

@@ -0,0 +1,107 @@
+/*
+ * Copyright (c) 2025 Texas Instruments
+ * Copyright (c) 2025 Linumiz
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+/dts-v1/;
+
+#include <ti/mspm0/g/mspm0g3507.dtsi>
+#include <ti/mspm0/g/mspm0g1x0x_g3x0x-pinctrl.dtsi>
+#include <zephyr/dt-bindings/clock/mspm0_clock.h>
+#include <zephyr/dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "TI LP_MSPM0G3507/MSPM0G3507";
+	compatible = "ti,mspm0g3507";
+
+	aliases {
+		led0 = &led0;
+	};
+
+	chosen {
+		zephyr,sram = &sram0;
+		zephyr,flash = &flash0;
+		zephyr,console = &uart0;
+		zephyr,shell-uart = &uart0;
+		zephyr,code-partition = &slot0_partition;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0: led_0 {
+			gpios = <&gpiob 22 GPIO_ACTIVE_HIGH>;
+			label = "Blue LED";
+		};
+	};
+};
+
+&cpu0 {
+	clock-frequency = <DT_FREQ_M(80)>;
+};
+
+&ulpclk {
+	clock-frequency = <DT_FREQ_M(40)>;
+	clk-div = <2>;
+};
+
+&mclk {
+	clock-frequency = <DT_FREQ_M(80)>;
+	clocks = <&hsclk 0>;
+};
+
+&hsclk {
+	clocks = <&syspll2x 0>;
+	status = "okay";
+};
+
+&syspll2x {
+	status = "okay";
+};
+
+&flash0 {
+	status = "okay";
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		boot_partition: partition@0 {
+			label = "mcuboot";
+			reg = <0x00000000 0x8000>;
+		};
+
+		slot0_partition: partition@8000 {
+			label = "image-0";
+			reg = <0x00008000 0xC000>;
+		};
+
+		slot1_partition: partition@14000 {
+			label = "image-1";
+			reg = <0x00014000 0xC000>;
+		};
+	};
+};
+
+&pinctrl {
+	status = "okay";
+};
+
+&gpioa {
+	status = "okay";
+};
+
+&gpiob {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+
+	current-speed = <115200>;
+	pinctrl-0 = <&uart0_tx_pa10 &uart0_rx_pa11>;
+	pinctrl-names = "default";
+};

boards/ti/lp_mspm0g3507/lp_mspm0g3507.yaml

@@ -0,0 +1,14 @@
+identifier: lp_mspm0g3507
+name: TI MSPM0G3507 Launchpad
+type: mcu
+arch: arm
+toolchain:
+  - zephyr
+  - gnuarmemb
+  - xtools
+ram: 32
+flash: 128
+supported:
+  - uart
+  - gpio
+vendor: ti

boards/ti/lp_mspm0g3507/lp_mspm0g3507_defconfig

@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: Apache-2.0
+
+# Enable UART driver
+CONFIG_SERIAL=y
+
+# Enable Console
+CONFIG_CONSOLE=y
+CONFIG_UART_CONSOLE=y
+
+CONFIG_CLOCK_CONTROL=y

boards/ti/lp_mspm0g3507/support/openocd.cfg

@@ -0,0 +1,4 @@
+source [find interface/xds110.cfg]
+adapter speed 10000
+
+source [find target/ti_mspm0.cfg]