michaelh/zephyr
1
0
Fork 0
Code Releases Activity

Bluetooth: Controller: Add CTE REQ disable when change PHY to CODED

Browse source 
Accodring to BT 5.3 Core Vol 4, Part E section 7.8.85 the CTE request
procedure has to be disabled as if Host issued the HCI_LE_Connection-
CTE_Request_Enable with enable property set to 0. It means a Controller
should automaticall  disable the procedure.

There were no handling of this part of specification.

Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
This commit is contained in:
Piotr Pryga 2022-01-28 22:58:34 +01:00 • committed by Carles Cufí
commit dbf86b0359
3 changed files with 72 additions and 20 deletions
Download patch file Download diff file Expand all files Collapse all files

40
subsys/bluetooth/controller/ll_sw/ull_llcp_common.c
View file

@ -353,14 +353,22 @@ static void lp_comm_complete(struct ll_conn *conn, struct proc_ctx *ctx, uint8_t
conn->llcp.cte_req.req_interval != 0U) {
conn->llcp.cte_req.req_expire = conn->llcp.cte_req.req_interval;
} else {
conn->llcp.cte_req.is_enabled = 0U;
/* TODO: add wait for notification buffer */
lp_comm_ntf(conn, ctx);
ull_cp_cte_req_set_disable(conn);
}
} else if (ctx->response_opcode == PDU_DATA_LLCTRL_TYPE_REJECT_EXT_IND &&
ctx->reject_ext_ind.reject_opcode == PDU_DATA_LLCTRL_TYPE_CTE_REQ) {
/* TODO: add wait for notification buffer */
lp_comm_ntf(conn, ctx);
conn->llcp.cte_req.is_enabled = 0U;
ull_cp_cte_req_set_disable(conn);
} else if (ctx->response_opcode == PDU_DATA_LLCTRL_TYPE_UNUSED) {
/* This path is related with handling disable the CTE REQ when PHY
* has been changed to CODED PHY. BT 5.3 Core Vol 4 Part E 7.8.85
* says CTE REQ has to be automatically disabled as if it had been requested
* by Host. There is no notification send to Host.
*/
ull_cp_cte_req_set_disable(conn);
}
llcp_rr_set_paused_cmd(conn, PROC_NONE);
@ -467,12 +475,30 @@ static void lp_comm_send_req(struct ll_conn *conn, struct proc_ctx *ctx, uint8_t
#endif /* CONFIG_BT_CTLR_DATA_LENGTH */
#if defined(CONFIG_BT_CTLR_DF_CONN_CTE_REQ)
case PROC_CTE_REQ:
if (ctx->pause || !llcp_tx_alloc_peek(conn, ctx) ||
(llcp_rr_get_paused_cmd(conn) == PROC_CTE_REQ)) {
ctx->state = LP_COMMON_STATE_WAIT_TX;
#if defined(CONFIG_BT_CTLR_PHY)
if (conn->lll.phy_rx != PHY_CODED) {
#else
if (1) {
#endif /* CONFIG_BT_CTLR_PHY */
if (ctx->pause || !llcp_tx_alloc_peek(conn, ctx) ||
(llcp_rr_get_paused_cmd(conn) == PROC_CTE_REQ)) {
ctx->state = LP_COMMON_STATE_WAIT_TX;
} else {
lp_comm_tx(conn, ctx);
ctx->state = LP_COMMON_STATE_WAIT_RX;
}
} else {
lp_comm_tx(conn, ctx);
ctx->state = LP_COMMON_STATE_WAIT_RX;
/* The PHY was changed to CODED when the request was waiting in a local
* request queue.
*
* Use of pair: proc PROC_CTE_REQ and rx_opcode PDU_DATA_LLCTRL_TYPE_UNUSED
* to complete the procedure before sending a request to peer.
* This is a special complete execution path to disable the procedure
* due to change of RX PHY to CODED.
*/
ctx->rx_opcode = PDU_DATA_LLCTRL_TYPE_UNUSED;
ctx->state = LP_COMMON_STATE_IDLE;
llcp_lr_complete(conn);
}
break;
#endif /* CONFIG_BT_CTLR_DF_CONN_CTE_REQ */