pm: rename device_pm_cb to pm_device_cb

Prefix all device PM functions/data structures with pm.

Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>

doc/reference/power_management/index.rst

@@ -295,7 +295,7 @@ Device Set Power State
 
 .. code-block:: c
 
-   int device_set_power_state(const struct device *dev, uint32_t device_power_state, device_pm_cb cb, void *arg);
+   int device_set_power_state(const struct device *dev, uint32_t device_power_state, pm_device_cb cb, void *arg);
 
 Calls the :c:func:`pm_control()` handler function implemented by the
 device driver with PM_DEVICE_SET_POWER_STATE command.

drivers/display/display_st7735r.c

@@ -520,7 +520,7 @@ static int st7735r_enter_sleep(struct st7735r_data *data)
 }
 
 static int st7735r_pm_control(const struct device *dev, uint32_t ctrl_command,
-			      void *context, device_pm_cb cb, void *arg)
+			      void *context, pm_device_cb cb, void *arg)
 {
 	int ret = 0;
 	struct st7735r_data *data = (struct st7735r_data *)dev->data;

drivers/display/display_st7789v.c

@@ -409,7 +409,7 @@ static void st7789v_enter_sleep(struct st7789v_data *data)
 }
 
 static int st7789v_pm_control(const struct device *dev, uint32_t ctrl_command,
-				 void *context, device_pm_cb cb, void *arg)
+				 void *context, pm_device_cb cb, void *arg)
 {
 	int ret = 0;
 	struct st7789v_data *data = (struct st7789v_data *)dev->data;

drivers/entropy/entropy_cc13xx_cc26xx.c

@@ -293,7 +293,7 @@ static int entropy_cc13xx_cc26xx_set_power_state(const struct device *dev,
 
 static int entropy_cc13xx_cc26xx_pm_control(const struct device *dev,
 					    uint32_t ctrl_command,
-					    void *context, device_pm_cb cb,
+					    void *context, pm_device_cb cb,
 					    void *arg)
 {
 	struct entropy_cc13xx_cc26xx_data *data = get_dev_data(dev);

drivers/ethernet/eth_mcux.c

@@ -186,7 +186,7 @@ void eth_mcux_phy_stop(struct eth_context *context);
 
 static int eth_mcux_device_pm_control(const struct device *dev,
 				      uint32_t command,
-				      void *context, device_pm_cb cb, void *arg)
+				      void *context, pm_device_cb cb, void *arg)
 {
 	struct eth_context *eth_ctx = (struct eth_context *)dev->data;
 	int ret = 0;

drivers/flash/spi_flash_at45.c

@@ -570,7 +570,7 @@ static int spi_flash_at45_init(const struct device *dev)
 #if IS_ENABLED(CONFIG_PM_DEVICE)
 static int spi_flash_at45_pm_control(const struct device *dev,
 				     uint32_t ctrl_command,
-				     void *context, device_pm_cb cb, void *arg)
+				     void *context, pm_device_cb cb, void *arg)
 {
 	struct spi_flash_at45_data *dev_data = get_dev_data(dev);
 	const struct spi_flash_at45_config *dev_config = get_dev_config(dev);

drivers/gpio/gpio_dw.c

@@ -461,7 +461,7 @@ static inline int gpio_dw_resume_from_suspend_port(const struct device *port)
 */
 static int gpio_dw_device_ctrl(const struct device *port,
 			       uint32_t ctrl_command,
-			       void *context, device_pm_cb cb, void *arg)
+			       void *context, pm_device_cb cb, void *arg)
 {
 	int ret = 0;
 

drivers/i2c/i2c_cc13xx_cc26xx.c

@@ -368,7 +368,7 @@ static int i2c_cc13xx_cc26xx_set_power_state(const struct device *dev,
 
 static int i2c_cc13xx_cc26xx_pm_control(const struct device *dev,
 					uint32_t ctrl_command,
-					void *context, device_pm_cb cb,
+					void *context, pm_device_cb cb,
 					void *arg)
 {
 	int ret = 0;

drivers/i2c/i2c_nrfx_twi.c

@@ -215,7 +215,7 @@ static int init_twi(const struct device *dev)
 #ifdef CONFIG_PM_DEVICE
 static int twi_nrfx_pm_control(const struct device *dev,
 				uint32_t ctrl_command,
-				void *context, device_pm_cb cb, void *arg)
+				void *context, pm_device_cb cb, void *arg)
 {
 	int ret = 0;
 	uint32_t pm_current_state = get_dev_data(dev)->pm_state;

drivers/i2c/i2c_nrfx_twim.c

@@ -265,7 +265,7 @@ static int init_twim(const struct device *dev)
 #ifdef CONFIG_PM_DEVICE
 static int twim_nrfx_pm_control(const struct device *dev,
 				uint32_t ctrl_command,
-				void *context, device_pm_cb cb, void *arg)
+				void *context, pm_device_cb cb, void *arg)
 {
 	int ret = 0;
 	uint32_t pm_current_state = get_dev_data(dev)->pm_state;

drivers/interrupt_controller/intc_arcv2_irq_unit.c

@@ -193,7 +193,7 @@ static int arc_v2_irq_unit_get_state(const struct device *dev)
  */
 static int arc_v2_irq_unit_device_ctrl(const struct device *dev,
 				       uint32_t ctrl_command, void *context,
-				       device_pm_cb cb, void *arg)
+				       pm_device_cb cb, void *arg)
 {
 	int ret = 0;
 	unsigned int key = arch_irq_lock();

drivers/interrupt_controller/intc_ioapic.c

@@ -305,7 +305,7 @@ int ioapic_resume_from_suspend(const struct device *port)
 */
 static int ioapic_device_ctrl(const struct device *dev,
 			      uint32_t ctrl_command,
-			      void *context, device_pm_cb cb, void *arg)
+			      void *context, pm_device_cb cb, void *arg)
 {
 	int ret = 0;
 

drivers/interrupt_controller/intc_loapic.c

@@ -404,7 +404,7 @@ int loapic_resume(const struct device *port)
 */
 static int loapic_device_ctrl(const struct device *port,
 			      uint32_t ctrl_command,
-			      void *context, device_pm_cb cb, void *arg)
+			      void *context, pm_device_cb cb, void *arg)
 {
 	int ret = 0;
 

drivers/led/led_pwm.c

@@ -176,7 +176,7 @@ static int led_pwm_pm_set_state(const struct device *dev, uint32_t new_state)
 }
 
 static int led_pwm_pm_control(const struct device *dev, uint32_t ctrl_command,
-			      void *context, device_pm_cb cb, void *arg)
+			      void *context, pm_device_cb cb, void *arg)
 {
 	int err;
 

drivers/pwm/pwm_nrfx.c

@@ -345,7 +345,7 @@ static int pwm_nrfx_pm_control(const struct device *dev,
 	static int pwm_##idx##_nrfx_pm_control(const struct device *dev,	\
 					       uint32_t ctrl_command,	\
 					       void *context,		\
-					       device_pm_cb cb,		\
+					       pm_device_cb cb,		\
 					       void *arg)		\
 	{								\
 		static uint32_t current_state = PM_DEVICE_ACTIVE_STATE;	\

drivers/sensor/apds9960/apds9960.c

@@ -410,7 +410,7 @@ static int apds9960_init_interrupt(const struct device *dev)
 #ifdef CONFIG_PM_DEVICE
 static int apds9960_device_ctrl(const struct device *dev,
 				uint32_t ctrl_command,
-				void *context, device_pm_cb cb, void *arg)
+				void *context, pm_device_cb cb, void *arg)
 {
 	const struct apds9960_config *config = dev->config;
 	struct apds9960_data *data = dev->data;

drivers/sensor/bme280/bme280.c

@@ -391,7 +391,7 @@ static int bme280_chip_init(const struct device *dev)
 
 #ifdef CONFIG_PM_DEVICE
 int bme280_pm_ctrl(const struct device *dev, uint32_t ctrl_command,
-				void *context, device_pm_cb cb, void *arg)
+				void *context, pm_device_cb cb, void *arg)
 {
 	struct bme280_data *data = to_data(dev);
 

drivers/sensor/bmp388/bmp388.c

@@ -590,7 +590,7 @@ static int bmp388_device_ctrl(
 	const struct device *dev,
 	uint32_t ctrl_command,
 	void *context,
-	device_pm_cb cb,
+	pm_device_cb cb,
 	void *arg)
 {
 	int ret = 0;

drivers/sensor/fdc2x1x/fdc2x1x.c

@@ -543,7 +543,7 @@ static int fdc2x1x_set_pm_state(const struct device *dev,
 
 static int fdc2x1x_device_pm_ctrl(const struct device *dev,
 				  uint32_t ctrl_command,
-				  void *context, device_pm_cb cb, void *arg)
+				  void *context, pm_device_cb cb, void *arg)
 {
 	struct fdc2x1x_data *data = dev->data;
 	uint32_t new_state;

drivers/sensor/lis2mdl/lis2mdl.c

@@ -520,7 +520,7 @@ static int lis2mdl_set_power_state(struct lis2mdl_data *lis2mdl,
 }
 
 static int lis2mdl_pm_control(const struct device *dev, uint32_t ctrl_command,
-				void *context, device_pm_cb cb, void *arg)
+				void *context, pm_device_cb cb, void *arg)
 {
 	struct lis2mdl_data *lis2mdl = dev->data;
 	const struct lis2mdl_config *const config = dev->config;

drivers/sensor/qdec_nrfx/qdec_nrfx.c

@@ -268,7 +268,7 @@ static int qdec_nrfx_pm_set_state(struct qdec_nrfx_data *data,
 
 static int qdec_nrfx_pm_control(const struct device *dev,
 				uint32_t ctrl_command,
-				void *context, device_pm_cb cb, void *arg)
+				void *context, pm_device_cb cb, void *arg)
 {
 	struct qdec_nrfx_data *data = &qdec_nrfx_data;
 	int err;

drivers/sensor/vcnl4040/vcnl4040.c

@@ -220,7 +220,7 @@ static int vcnl4040_ambient_setup(const struct device *dev)
 #ifdef CONFIG_PM_DEVICE
 static int vcnl4040_device_ctrl(const struct device *dev,
 				uint32_t ctrl_command, void *context,
-				device_pm_cb cb, void *arg)
+				pm_device_cb cb, void *arg)
 {
 	int ret = 0;
 

drivers/serial/uart_cc13xx_cc26xx.c

@@ -444,7 +444,7 @@ static int uart_cc13xx_cc26xx_set_power_state(const struct device *dev,
 
 static int uart_cc13xx_cc26xx_pm_control(const struct device *dev,
 					 uint32_t ctrl_command,
-					 void *context, device_pm_cb cb,
+					 void *context, pm_device_cb cb,
 					 void *arg)
 {
 	int ret = 0;

drivers/serial/uart_npcx.c

@@ -449,7 +449,7 @@ static inline int uart_npcx_set_power_state(const struct device *dev,
 
 /* Implements the device power management control functionality */
 static int uart_npcx_pm_control(const struct device *dev, uint32_t ctrl_command,
-				 void *context, device_pm_cb cb, void *arg)
+				 void *context, pm_device_cb cb, void *arg)
 {
 	int ret = 0;
 

drivers/serial/uart_nrfx_uart.c

@@ -1158,7 +1158,7 @@ static void uart_nrfx_set_power_state(const struct device *dev,
 
 static int uart_nrfx_pm_control(const struct device *dev,
 				uint32_t ctrl_command,
-				void *context, device_pm_cb cb, void *arg)
+				void *context, pm_device_cb cb, void *arg)
 {
 	static uint32_t current_state = PM_DEVICE_ACTIVE_STATE;
 

drivers/serial/uart_nrfx_uarte.c

@@ -1863,7 +1863,7 @@ static void uarte_nrfx_set_power_state(const struct device *dev,
 
 static int uarte_nrfx_pm_control(const struct device *dev,
 				 uint32_t ctrl_command,
-				 void *context, device_pm_cb cb, void *arg)
+				 void *context, pm_device_cb cb, void *arg)
 {
 	struct uarte_nrfx_data *data = get_dev_data(dev);
 

drivers/serial/uart_stm32.c

@@ -1461,7 +1461,7 @@ static int uart_stm32_set_power_state(const struct device *dev,
  */
 static int uart_stm32_pm_control(const struct device *dev,
 					 uint32_t ctrl_command,
-					 void *context, device_pm_cb cb,
+					 void *context, pm_device_cb cb,
 					 void *arg)
 {
 	struct uart_stm32_data *data = DEV_DATA(dev);

drivers/spi/spi_cc13xx_cc26xx.c

@@ -251,7 +251,7 @@ static int spi_cc13xx_cc26xx_set_power_state(const struct device *dev,
 
 static int spi_cc13xx_cc26xx_pm_control(const struct device *dev,
 					uint32_t ctrl_command,
-					void *context, device_pm_cb cb,
+					void *context, pm_device_cb cb,
 					void *arg)
 {
 	int ret = 0;

drivers/spi/spi_nrfx_spi.c

@@ -286,7 +286,7 @@ static int init_spi(const struct device *dev)
 #ifdef CONFIG_PM_DEVICE
 static int spi_nrfx_pm_control(const struct device *dev,
 				uint32_t ctrl_command,
-				void *context, device_pm_cb cb, void *arg)
+				void *context, pm_device_cb cb, void *arg)
 {
 	int ret = 0;
 	struct spi_nrfx_data *data = get_dev_data(dev);

drivers/spi/spi_nrfx_spim.c

@@ -334,7 +334,7 @@ static int init_spim(const struct device *dev)
 #ifdef CONFIG_PM_DEVICE
 static int spim_nrfx_pm_control(const struct device *dev,
 				uint32_t ctrl_command,
-				void *context, device_pm_cb cb, void *arg)
+				void *context, pm_device_cb cb, void *arg)
 {
 	int ret = 0;
 	struct spi_nrfx_data *data = get_dev_data(dev);

drivers/timer/sys_clock_init.c

@@ -32,7 +32,7 @@ int __weak sys_clock_driver_init(const struct device *dev)
 
 int __weak sys_clock_device_ctrl(const struct device *dev,
 			       uint32_t ctrl_command,
-			       void *context, device_pm_cb cb, void *arg)
+			       void *context, pm_device_cb cb, void *arg)
 {
 	return -ENOTSUP;
 }

include/device.h

@@ -387,7 +387,7 @@ struct device {
 #ifdef CONFIG_PM_DEVICE
 	/** Power Management function */
 	int (*pm_control)(const struct device *dev, uint32_t command,
-				 void *context, device_pm_cb cb, void *arg);
+				 void *context, pm_device_cb cb, void *arg);
 	/** Pointer to device instance power management data */
 	struct pm_device * const pm;
 #endif
@@ -657,7 +657,7 @@ void device_busy_clear(const struct device *dev);
  */
 static inline int device_set_power_state(const struct device *dev,
 					 uint32_t device_power_state,
-					 device_pm_cb cb, void *arg)
+					 pm_device_cb cb, void *arg)
 {
 	if (dev->pm_control == NULL) {
 		return -ENOSYS;

include/drivers/timer/system_timer.h

@@ -48,7 +48,7 @@ extern int sys_clock_driver_init(const struct device *dev);
  */
 extern int clock_device_ctrl(const struct device *dev,
 			       uint32_t ctrl_command,
-			       void *context, device_pm_cb cb, void *arg);
+			       void *context, pm_device_cb cb, void *arg);
 
 /**
  * @brief Set system clock timeout

include/pm/device.h

@@ -77,7 +77,7 @@ struct device;
 #define PM_DEVICE_SET_POWER_STATE       1
 #define PM_DEVICE_GET_POWER_STATE       2
 
-typedef void (*device_pm_cb)(const struct device *dev,
+typedef void (*pm_device_cb)(const struct device *dev,
 			     int status, void *context, void *arg);
 
 /**

samples/subsys/pm/device_pm/src/dummy_driver.c

@@ -116,7 +116,7 @@ static int dummy_resume_from_suspend(const struct device *dev)
 
 static int dummy_device_pm_ctrl(const struct device *dev,
 				uint32_t ctrl_command,
-				void *context, device_pm_cb cb, void *arg)
+				void *context, pm_device_cb cb, void *arg)
 {
 	int ret = 0;
 

samples/subsys/pm/device_pm/src/dummy_parent.c

@@ -47,7 +47,7 @@ static int dummy_resume_from_suspend(const struct device *dev)
 
 static int dummy_parent_pm_ctrl(const struct device *dev,
 				uint32_t ctrl_command,
-				void *context, device_pm_cb cb, void *arg)
+				void *context, pm_device_cb cb, void *arg)
 {
 	int ret = 0;
 

tests/net/pm/src/main.c

@@ -22,7 +22,7 @@ struct fake_dev_context {
 };
 
 static int fake_dev_pm_control(const struct device *dev, uint32_t command,
-			       void *context, device_pm_cb cb, void *arg)
+			       void *context, pm_device_cb cb, void *arg)
 {
 	struct fake_dev_context *ctx = dev->data;
 	int ret = 0;

tests/subsys/pm/power_mgmt/src/dummy_driver.c

@@ -40,7 +40,7 @@ static int dummy_resume_from_suspend(const struct device *dev)
 
 static int dummy_device_pm_ctrl(const struct device *dev,
 				uint32_t ctrl_command,
-				void *context, device_pm_cb cb, void *arg)
+				void *context, pm_device_cb cb, void *arg)
 {
 	int ret = 0;